Panel saw

SCM Gabbiani P55

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm Bedpfx Ajt R T Hcsgzjld - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Condition: new, Year of construction: 2025, Martin T 54 jointer Bjdpfxspq If Ds Agzsld Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Huyjm0s Motor power: 5,5kW Fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T5406/3-a solid steel cutterhead Xplane with 3 spiral knife rows (26 cambered carbide knives per row; 2 counter knives), delivery includes full knife equipment as well as a T-wrench Torx T20; shaft speed 6,000 rpm included. The emission sound pressure level LpA during machining is reduced by 8 dB(A). Location: ex stock 54634 Bitburg - immediately available -

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, saw blade diameter: 600 mm, working height: 900 mm, saw drive: 7,500 W, Mitre saw adjustable to 45° equipped with 6-meter pusher discharge deck with 6-strand loading chains for faster loading Bsdpfjwzg E Nex Agzjld machine overhauled and fitted with a new digital touchscreen

Condition: used, Year of construction: 2018, functionality: fully functional, SCM Olimpic K 560 Automatic Edge Gluing, year 2018 for sale! Complectation: Chain feed speed 12/18m/min Edge thickness 0.4/3mm EVA glue Panel milling unit "RT-V" Glue application unit "VC-S4.1" Edge trimming unit "K-SEL" Edge milling unit "R-K" Edge corner rounding unit "ROUND X" Edge scraping unit RAS-K Polishing unit SP-V Technical characteristic: Conveyor speed (two speeds) m/min 12 - 18 Min / max part thickness mm 8 - 60 Thickness of glued wooden edge mm 0.4 - 6 (8mm HP composition) Thickness of glued roll edge mm 0.4 - 3 Maximum area of ​​glued roll edge mm² 135 Diameter of reel support "plate" mm 780 Bsdpfx Agjw Sw Tkezeld Maximum overlap of glued edge, relative to the part mm 2+2 Minimum distance between transported parts mm 600 Minimum length of part (when the width of the part is min. 100 mm) mm 140 Minimum length of roll edge mm 180 Minimum length of wooden edge mm 220 Minimum width of the part (when the length of the part is min. 210 mm) mm 95 (60mm opc.) Width of the extension support mm 560 Height of the worktable from the floor mm 900 Plate milling unit "RT-V" Max. chip removal area mm2 55 Max. milling thickness mm 3 Min. / max. thickness of the part mm 8 - 45 (60mm opc. Motor power kW 2 x 1.5 Mill diameter mm 100 Mill height mm 49 (64mm opc.) Tool rotation speed rpm 9000

Condition: ready for operation (used), Year of construction: 2019, This SCM Class SI 400EP panel saw was manufactured in 2019. It features a maximum saw blade diameter of 400 mm and a cutting width on rip fence up to 1500 mm. The sliding table saw offers a squaring stroke of up to 3800 mm. Ideal for precise wood panel cutting. Contact us for more information. • Machine Condition: Very good • Maximum Saw Blade Diameter (with Mounted Scorer): 400 mm • Maximum Saw Blade Projection from Table at 90° / 45°: 140 / 97 mm • Cutting Width on Rip Fence (Rip Capacity): 1000 – 1500 mm Bodpfxsyabkve Agzold • Maximum Squaring Stroke of Sliding Table Saw: 3200 – 3800 × 3200 mm • Three-Phase Motor Starting From: 7 kW (8 kW) / 50 Hz (60 Hz)

Condition: used, Technical data: Max planing width: 230 mm Max planing height: 120 mm Spindle diameter: 40 mm Number of spindles: 5 Spindle sequence: down 5.5 kW Bedpfsmiik Tsx Agzsld right + left 11 kW up 7.5 kW universal 5.5 kW Each spindle on a separate motor Number of upper steel pulling rollers: 5 Number of upper rubber pulling rollers: 3 1 rubber roller in the table top Extraction port diameter: 150 mm Smooth feed adjustment: 4-24 m/min Cardan feed Table lubrication pump Pressure: 6 atm. Electric lifting of the body Power: 400V Overall dimensions: Length: 4240mm Width: 1550mm Height: 1560mm

Year of construction: 2010, condition: excellent (used), I sell the window prodution sets of tools suitable for CNC window angular profiling centres: LEUT Wood-Alu 110mm Hole 50mm. Blodpfx Ajg Tumyegzed All complete. Very good condition. Available as a set. Possible to buy also separately.

Condition: used, Year of construction: 2009, Briquetting press with hopper Motor 7.5 kW Briquette diameter: 50 mm Throughput capacity: 80 - 100 kg/h Weight: approx. 870 kg Oil capacity: 100 L With oil heating, agitator, and screw discharge With fill level sensor With automatic start Container size: 1500 x 1500 x 900 mm Overall dimensions: 2300 x 1800 x 1200 mm Operating hours: 3370 h Storage location: Nattheim Bledpfx Ajx Twb Sogzsd

Condition: excellent (used), total width: 1,500 mm, total length: 3,000 mm, Panel press in very good working condition + Grecon finger jointing Bledst Uduxepfx Agzed

Condition: like new (used), Working width 1350 mm Bledpfx Aeuuitgegzjd The machine is in excellent, new condition as shown in the pictures.