Buffing and polishing machine

Schwabbel- und Poliermaschine Schwabbel- und Poliermaschine

Condition: used, Used machine with 2 polishing disks Disk diameter approx. 500 mm Disk thickness approx. 80 mm Motor 400 V Fpsdpfszk N Ivsx Andoi Availability: short notice Location: Röllbach in age-appropriate condition

Condition: like new (used), functionality: fully functional, Weiler center lathe Model Condor 81 guidance and feed spindle lathe with 3-axis digital display from K&C, NEW Geometrically overhauled with inspection protocol for new machine tolerances Technical data: >> Machine No. 84-121 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg Fodpewrm Dtefx Andspi >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and accessories: >> 3-axis digital display from K&C, new, 12 months manufacturer warranty with operating instructions Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 pcs., taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck NEW, collets NEW from 3 to 26mm, increments of 1mm >> 160 mm three-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 piece steel holders >> Bed stop >> Electric chuck guard NEW >> Rear wall >> Operating manual >> Coolant device >> Machine feet About the machine: A Weiler Condor 81 guide and feed spindle lathe in a very good, geometrically overhauled condition is being offered. The guides are newly ground or newly scraped. Inspected according to test protocol. The accessories collets and chuck are new. For safety: The machine has a brake motor, electronic spindle guard and two emergency stops, making it an absolutely as-new lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is very user-friendly and allows surfaces as if ground to be produced. Take the opportunity to view this machine on site under power and convince yourself of its condition.

Year of construction: 2010, condition: ready for operation (used), Turning diameter over bed/face slide/crank: 460mm/258mm/785mm, center width: 1016mm, bed width: 300mm, spindle bore: 58mm, speed: 2000rpm, diameter lead screw/quill: 35mm/65mm, quill adjustment: 127mm. Machine dimensions X/Y/Z: approx. 1900mm/850mm/1200mm, weight: approx. 1650kg. Documentation available. On-site inspection is possible. Expected to be available from the end of May 2025. Fpsdpfx Aowal H Aondoi

Condition: new, Year of construction: 2024, Facility managers and property management companies are familiar with this problem: on collection day, when the garbage truck empties the bins, all bins must be at the collection point. If the waste containers are usually located in the underground garage, the caretaker has to move all the bins up the ramp of the underground garage. This is time-consuming and physically demanding, or even impossible to do alone. A 240 kg garbage bin, when filled with waste paper, can weigh over 200 kg, and an 1100-liter garbage container can even weigh over a ton. In such cases, the caretaker needs the help of a second person, which is costly. Weber offers time-saving and health-friendly solutions for this problem. Ask us about our garbage bin frames for 1100-liter garbage containers and our garbage bin carts for 120 and 240-liter garbage bins. And yes, we also offer battery-powered towing vehicles. Health-friendly Effective 400 kg payload Galvanized Can be connected to each other Professional equipment - not for use on public roads Fpodpfx Asi Nnruondsi Adapter: Ball head Hitch

Condition: new, range L-W-H 675 x 510 x 880 mm weight 56 kg 5 St. Professional tool trolley for workshop equipment. Internal dimensions of the upper 4 drawers 56 x 43 x 10 cm. Fpjdou Iml Iepfx Andoi Inner dimensions of the lower drawer 56 x 43 x 17 cm. Dimensions of the wheels 100 x 30 mm.

Condition: new, bore capacity in steel (diameter) 32 mm throat 300 mm bore stroke 160 mm morse taper 4 MK table: 460 x 460 mm turning speeds 75 - 3200 U/min engine output 1,5 kW column diameter 125 mm thread M16 ST60 feed 0,10/0,18/0,26 mm/U dimensions 800 x 500 x 2200 mm weight 350 kg - automatic drill feeds (magnetic clutch) - Height adjustable and angle adjustable table Fpsdpfxjkahu Rj Andoi - Movable work table - Integrated cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Condition: used, Boring power 23.0 / 28.0 mm Boring depth max. 140 mm Center of spindle to wall or column 300 mm Column diameter 125 mm Size of table plate 415 x 385 mm Fpsdpexabbysfx Andoi Speed 100 - 2000 U/min. spindle taper MT 2 MK voltage 380 V Motor output 0.9 / 1.4 KW weight of the machine ca. 225 kg Dimensions (L/W/H) 900 x 600 x 1960 mm maintained condition (!!) Furnishing: - V-belt operated column drilling machine - Right/left running of the work spindle - Pole-changing drive motor - manual spindle feed via cross handle - Work table with 2x T-slots - Table height adjustment via hand crank - machined base plate with 3x T-slots - manual V-belt tension (front handwheel) - Connection cable including 16A plug * Machine link: ?machineno=1008-9103760

Condition: new, bore capacity in steel (diameter) 40.0 mm bore capacity in cast iron 45.0 mm throat 300 mm bore stroke 160 mm morse taper 4 MK table: 615 x 430 mm turning speeds 100 - 1800 U/min column diameter 145 mm thread M 24 ST60 thread M 30 GG20 Fpodpfx Aoxab Nkondji feed 0.1-0.2-0.3-0.4 mm/U distance spindle /table 138 / 688 mm engine output 1.4 / 2.2 kW weight 470 kg Machine height 1865 mm NEW ALZMETALL MODEL RANGE 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop * in the TFT - LCD display (3 tools). - Infinitely variable speed setting by means of an adjusting lever - Electromagnetic feed clutch * with overload protection and electrical * Comfort cross-handle switch * Feed rates selectable 0.1-0.2-0.3-0.4 mm / rev - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Paint: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: - 12. LED machine light - 24. Coolant system A * in the machine base

Condition: new, Year of construction: 2026, CORMAK SP150 Polisher – industrial disc polisher for deburring and surface finishing The CORMAK SP150 satin finishing machine is a high-performance disc polisher designed for professional surface finishing, deburring, matting, and high-gloss polishing. It is an ideal solution for manufacturing plants, metalworking shops, tool workshops, and metal processing facilities where durability, precision, and reliability are essential. The machine’s solid construction is based on a modern cast housing manufactured in accordance with current industrial standards, as well as a rotor equipped with high-quality NSK bearings, ensuring exceptionally quiet and smooth operation. Thanks to the tapered spindle thread, various types of polishing discs—from soft to hard—can be mounted quickly and securely, depending on the machining process. This industrial polisher is equipped with a 0.5 kW motor, providing a substantial power reserve and reliable performance even under demanding production conditions. The applied technical solutions make the SP150 model an extremely versatile tool—serving both as a satin finishing machine for matting and satinizing surfaces, and as a polisher for achieving a high-gloss finish. Fodeyb Etwspfx Andopi If you are looking for a robust and versatile device, CORMAK satin finishing machines are a choice that meets the expectations of even the most demanding professionals. Key features: Industrial disc polisher Satin finishing machine for matting, deburring, and surface finishing NSK bearings – reliability, quiet operation, long service life High-quality cast housing – durability and structural rigidity Powerful 0.5 kW motor – performance for professionals Technical parameters of the SP150 satin finisher Polishing disc diameter: 150 mm Polishing disc thickness: 26 mm Polishing disc bore: 16 mm Maximum rotational speed: 2850 rpm Motor power: 0.5 kW Voltage: 230 V Dimensions: 470 × 200 × 280 mm Weight: 13.8 kg

Condition: ready for operation (used), POLISHING MACHINE - BENCHTOP MODEL Technical data: Fpodpfxoza Dfps Andoi left polishing disc, diameter: 380 mm right polishing disc, diameter: 280 mm power connection: 380 V/50 Hz