Sheet metal former

Schröder MAKV 1000/3,0

Condition: used, Year of construction: 2013, functionality: fully functional, type of input current: three-phase, sheet thickness steel (max.): 3 mm, overall weight: 15,000 kg, input voltage: 400 V, bending angle (max.): 180 °, working length: 3,200 mm, working range: 3,200 mm, Equipment: documentation/manual, safety light barrier, Technical features: Year 2013 Working length 3200 mm Maximum sheet thickness (iron 400 N/mm2) 3.00 mm Maximum sheet thickness (stainless steel) 2.00 mm Maximum sheet thickness (aluminum) 4.00 mm Maximum bending height on four sides 250 mm Upper jaw stroke 650 mm Nedewq Rumspfx Agwjkw

Condition: used, functionality: fully functional, Year of construction: 2008, Used RAS 86.33 swing-beam guillotine shear with newly ground upper and lower blades, always serviced and rarely used. Technical specifications: Year of manufacture: 2008 Weight: 6,800 kg Max. sheet thickness at 400 N/mm²: 6.3 mm Working length: 3,190 mm Stop depth: 5-1,000 mm Nksdpfx Aov Tk Exegwsw Working height: 800 mm Stroke rate per minute: 30-64 N/min Connections: 400 V / 50 Hz / 40 A 3 PE / three-phase AC Power consumption: 18.5 kW Machine width: 3,830 mm Machine depth without angle stop: 2,195 mm Machine depth with angle stop: 3,275 mm Machine height: 1,725 mm Air pressure: 5 bar Frame overhang: 100 mm Tank capacity: 150 l

Year of construction: 2014, condition: ready for operation (used), A Lissmac steel brushing and deburring machine is available. Passage width: 1500mm, max. sheet thickness: 20mm, medium: brushing block, machine dimensions X/Y/Z: approx. 3100mm/1400mm/1800mm, weight: approx. 2300kg. Documentation available. On-site inspection is possible. Nkedpfxjwi Tnte Agwjw

Year of construction: 2018, operating hours: 5,080 h, condition: ready for operation (used), General Data Machine weight 4700 kg Measurements height 1852 mm Dimensions Machine Length 1928 mm Control Unit Brand SIEMENS Model 840D Main Drive Nksdpfxex D Huao Agwew Number of axis 3 Spindle Speed 5000 RPM Spindle motor power 16.5 kW Movement X-Axis Movement 242.5 mm Z-Axis Movement 540 mm Y-Axis Movement 80 mm Technical Specification Driven Tools yes This 3-axis DMG CLX 350 V4 was manufactured in 2018 and features a max turning diameter of 320 mm, spindle speed up to 5,000 rpm, and a bar capacity of Ø 65 mm. It includes a VDI 30 turret with 12 stations for driven tools, enhancing versatility. Ideal for precision turning with rapid traverse rates and Siemens 840D sl control for advanced operations. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Max. workpiece thickness: 20mm, including one unused and originally packed set of blades. Nedpoim Ixfsfx Agwokw

Condition: excellent (used), functionality: fully functional, control type: CNC control, Thank you very much for your inquiry regarding the Faccin 4-roll CNC bending machine, which has seen very little use. The machine will be sold soon due to internal restructuring. It is in excellent condition. Electronically controlled, hydraulic four-roll bending machine Manufacturer: FACCIN, Model 4 HEL/2122 Technical specifications: Number of rolls: Four Roll geometry: Linear guides Nkjdpfx Agjywk Uyjwew Working width: 2000 mm Top roll diameter: 225 mm Bottom roll diameter: 215 mm Side roll diameter: 165 mm Pressing force on the top roll: 100 tons Rated power requirement: 9.2 kW (12.5 HP) Rated maximum rolling speed: 4–8 m/min Machine weight: 4,450 kg Length: 3,500 mm Width: 1,200 mm Height: 1,100 mm Guaranteed performance: For a yield strength of 260 N/mm²: Rolling capacity (full working width): 11 mm Bending capacity (full working width): 8 mm from a minimum pipe diameter of 1,100 mm Rolling capacity (full working width): 8 mm Bending capacity (full working width): 6 mm from a minimum pipe diameter of 286 mm Standard features: Double linear guide system for roll movement Extra-wide bearing blocks MCS double bearing system for roll rotation Extra heavy-duty, double-articulated joint bearings EPS parallelism system Hardened rolls for high wear resistance All rolls ground after heat treatment Siemens S7 PLC control PGS-CLASSIC control with Siemens touch panel High-quality hydraulic and electrical components Safety pull-cord with emergency stop and CE certification Central lubrication Cone bending device The machine will be available for sale from the end of April.

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 2000 mm 11 mm 11 mm 7 mm 8 mm 6.4 mm 225 mm 215 mm 165 mm 8 m/min 3950 mm 1200 mm 1200 mm Nkedpfoypbp Rjx Agwjw 4450 kg Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear guide for the movement of the lower rolls Ultra wide rolls blocks "MCS" bearing system for the lower rolls (4 large bearings on each shaft) Central lubrication system Pressure manometer for constant pinch roll control Extra torque and special braking system Safety cord with emergency stop Equipped according to "CE" regulations OPTION: CNC control Siemens PSG-Absolute with 15" touch screen (automatic calculation of the process for simple and complex shapes)

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 6,314 h, machine/vehicle number: B1505I0180, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Trumpf, controller model: Touchpoint TruBend, bending force (max.): 173 t, working width: 3,230 mm, stroke length: 445 mm, operating speed: 1,000 mm/s, reverse speed: 220 mm/s, number of axes: 4, table height: 1,095 mm, back gauge adjustment: CNC-controlled, overall weight: 14,150 kg, total length: 3,980 mm, total width: 1,900 mm, total height: 3,000 mm, input voltage: 400 V, Equipment: CE marking, We are offering this Trumpf TruBend 5170 press brake in very good condition, year of manufacture 2018. Nsdpfx Aeyu Sg Rjgwokw Manufacturer: Trumpf Model: TruBend 5170 Year of manufacture: 2018 Technical condition: very good If you have any questions or need further information, please contact us by message or phone.

Condition: repair required (used), functionality: limited functionality, The machine's monitor is damaged. Nedpfoyw Rl Esx Agwekw

Condition: used, Year of construction: 2011, SCHRÖDER-FASTI 940-160/40 Nksdpjynkugjfx Agwew