Gravure Printing Machine

SCHIAVI ROTO CADET

Year of construction: 2006, condition: used, Gaemmeler KL 540 Compensating Stacker with attached blocking device VM 500 The compensating stacker KL 540 is equipped with the proven Gaemmerler LiftPack technology. The KL 540 is suitable for bundle heights up to 300 mm. Nummerous options allow to meet the individual customer requirements. Condition: cleaned and ready for production Technical Data: Cycle time ≥ 1,5 sec. (depending on the copy) ≥ 1,2 sec. with Servo pusher (depending on the copy ) Pagination 4 – 96 Heatset / Gravure Formats A 105 – 330 mm (with rear-eject 105 – 310 mm) B 140 – 500 mm D max. 560 mm Layer height max. 200 mm Bundle height max. 300 mm Weight: 1.500 kg approx. Gaemmerler VM500 blocking unit Cycle time: (approx. 6.7 sec) per pack with a pack height of 300 mm and a blocking time of 2 sec. The cycle time per pack increases when the blocking time is increased and the pack height is reduced. The cycle time is also strongly influenced by the output speed of the compensating stacker and thus by the product (surface, format). Sizes: Width: 140 to 500 mm - 5.5" to 19.7" Length: 105 to 330 mm - 4.13" to 13" Todpjh Nrh Uefx Ahuof Pile height: 55 to 400mm - 2.16 to 15.7" Inlet height: 890 mm - 35" Outlet height: 890 mm - 35" Connected load: 16A (2KW, 380/480 Volt, 3 phases, neutral) Air requirement: 1000 standard l/min, 6 bar; unoiled, dry air Weight: approx. 500 kg

Condition: good (used), Year of construction: 1998, SANJO P 270 - 6C Age: 1998 Tedpfx Aegvg A Ishuof Web-width: 270mm 6-color Flexo 1 x Varnish Unit Unwind Rewind One of the printing units, is for back side printing, and is very rare to find for this machine Lot of printing cylinders, aniloxes are coming with the machine DELAM RELAM TENSION CONTROL

Condition: used, Year of construction: 2004, Technical Specifications: Travel X/Y/Z: 650 / 500 / 450 mm Clamping Area: 1000 x 600 mm Spindle Mount: SK 40 Spindle Speed: 6500 rpm Max. Table Load: 400 kg Number of Tool Magazine Positions: 20 Power: 24 kVA Machine Weight, Approx.: 5500 kg Equipment: - Motorized Spindle 12000 rpm - 20-Station Tool Changer Tedswglapopfx Ahuof - Heidenhain Tool Probe - Heidenhain Workpiece Probe - Heidenhain Handwheel - Menzel Minimum Quantity Lubrication - Approx. 25 Tool Holders

Year of construction: 2015, condition: ready for operation (used), This is an inclined wire paper machine for the production of filter nonwovens, filter paper, insulation paper, membrane carriers, cardboard, tablecloths and more, speed: 5-120m/min, flow rate: 2500-20,000l/min, the manufacturers are various companies from Canada, Ukraine and Europe, some modifications have been made to the system such as a new shredder, larger vacuum pump, vibrating screen for water treatment, second headbox, new distributor and more, an inspection is possible. Todpfjqzyaxox Ahujf

Condition: used, Year of construction: 2012, functionality: fully functional, total length: 1,020 mm, total width: 740 mm, ESC ATMACE 710/G: Max print format: 720x1020 Max substrate format: 740x1020 Tsdpjwnbbxefx Ahusf Min. substrate format: 330x480 Max size of the screen printing frame: 1140x1280 Squeegee angle adjustment range: 30 degrees Fit adjustment range: /-10 Manual feed - ¾ auto Max speed - depends on the substrate: 500 sheets/h Power consumption: approx. 3.9 kW Dimensions: length/width/height 2700x2500x1500 year of manufacture 2012 UV TUNNEL EPS SUV 800: Max sheet format: 1050x780 Max stack height: 860 Max conveyor speed: 45m/min. Max power consumption: 14.3 kW Weight: 550 kg Dimensions: length/width/height 4300x1680x1380 year of manufacture 2012 The set additionally: - Station for washing sieves, - grinder for sharpeni...

Condition: used, Year of construction: 2003, Offset 6 color with coating Roland 706/3B+LTTLV (UV) Year: 2003 Number of impressions (mio): 500 Machine control - RCI - IntelliTrax II density control Feeder - Non-Stop feeder - Logistic system in feeder Printing units - Number of printing unit(s): 6 - Straight machine - APL Full Automatic Plate Change - Automatic blanket washing device - Cooling system: Technotrans - Ink temperature control Coating - Number of coating unit(s): 2 Tedpfeuhtg Aox Ahuof - Number of transfer unit(s): 2 - Tresu chambered ductor blade system - Number of Anilox roller(s): 2 Drying - IR dryer between coating unit 1 and 2 - IR + hot-air dryer in delivery - UV dryer in delivery: Eltosch Delivery - Non-Stop delivery - Powder spray: Grafix Cantronic 3000 - Logistic system in delivery Elevation - Machine raised by (cm): 50 Accessories - Air cabinet: Becker - Cabinets air cooled - Compressed air compressor, excluded

Condition: used, Year of construction: 2005, Saddle stitcher Heidelberg Stitchmaster ST 400 Year 2005 Operation / Control - Colour monitor Feeders - Number of chain stations: 9 - Horizontal signature feeders: 2 x TAL 400 - Vertical signature feeders: 6 x TAS 400 - Cover feeder: UFA 400 - Excluding pump(s) Stitching unit Heidelberg Stitchmaster ST 400 - Thickness control - Stitching heads: 2 Todoh E Ewdspfx Ahujf - Delivery to the left - Reject gate, for incomplete products Trimmer Heidelberg TR 400 - Sets of knives: 2 Delivery Heidelberg CHA - Compensating stacker - Delivery to the left

Condition: ready for operation (used), Year of construction: 1967, A Winkler + Dünnebier envelope printing machine is available. Envelope type: peel & seal gumming, format range side seam min./max.: 114mm x 150mm/330mm x 450mm, format range center seam min./max.: 114mm x 150mm/230mm x 450mm, paper weight range: 70g-165g/m², production output: 250 envelopes/min. Including vacuum pump and blow air pump. Documentation available. On-site inspection is possible. Tsdpfx Asvva Hqohuef

Condition: ready for operation (used), functionality: fully functional, Graphic Whizard numbering, perforating and creasing machine with many accessories. Immediately available Todpfxevcxwns Ahujf

Condition: used, Year of construction: 1989, Sammelhefter / Saddle Stitcher Müller Martini 335Year 1989 7 Feeder Type 306 Tjdpeq Rhx Sjfx Ahusf Umschlaganleger / Cover Feeder Type 344.0400 Heftstation / Stitching unit Bravo Plus Typ 335.0401 Dreischneider / Three Knife Trimmer 890.8400 Kreuzleger / Compensating Counter Stacker 2 Compressors - Manuals all included Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test