Precision milling machine

Schaublin 13

Condition: used, TECHNICAL DETAILS - Strokes : 320 x 150 x 375 [mm] - Distance between vertical spindle-table surface : 310 [mm] - Distance between horizontal spindle-table surface : 410 [mm] - Spindle speeds (continuous adjustment) : 58-2000 [Rpm] - Spindle taper : 30 ISO - Feeds : 12-400 [mm/min] Gbjdpfxsuhbw Ne Af Top - Fast feed up : 1200 [mm/min] - Supply : 3 x 380 [V/50 Hz] - Motor power : 1.5 [kW] - Total installed power : 2.1 [kW] - Machine floor space : 1500 x 1100 x 1600 [mm] - Machine weight : approx. 700 [kg] EQUIPMENT - Revolving vice - Irrigation system

Condition: excellent (used), - Heidenhain digital display. - Accessories available. Travel paths: X – travel 280 mm Godpfxew Hqf Rj Af Tjbp Y – travel 210 mm Cross table KS 255 D Spindle speeds 135 – 4,500 rpm

Condition: excellent (used), Digital display Accessories available Table Usable table surface: 700 x 250 mm Travel paths X-axis travel: 320 mm Y-axis travel: 150 mm Z-axis travel: 370 mm Automatic table movements 8 longitudinal feeds: 11 to 210 mm/min 8 vertical feeds: 11 to 210 mm/min Rapid feed of the table Gjdpfjyywnfjx Af Tjbp Longitudinal and vertical: 1000 mm/min Spindle taper: ISO 30

Condition: used, machine/vehicle number: 1023, Manufacturing origin Swiss Voltage 380/50/3 Netweight 740 kg Dimensions 155x110x160 cm Total power 2,1 kW Customs position 8459.6930 spindle ISO 30, with digital read-out Sony LM31 - 3 axes TECHNICAL DATA Geometrical characteristics VERTICAL RECTANGULAR TABLE - working surface 740x200 mm - number of T-slots 2 - width of T-slots 12-H7 mm - distance between slots 120 mm FIXED ANGULAR TABLE (accessory 13-5.421) - working surface 700x250 mm - number of T-slots 5 - width of T-slots 12-H7 mm - distance between slots 40 mm - provision for lateral traverse 250 mm in all INCLINABLE UNIVERSAL TABLE (accessory 13-5.300) - working surface 600x210 mm - number of T-slots 4 - width of T-slots 12-H7 mm - distance between slots 40 mm - provision for lateral traverse 350 mm in all Angular setting in all 3 planes, in either direction (horizontal-lateral-transverse) 30°-45°-30° SPINDLE INTERNAL TAPER - horizontal spindle head Iso 30 (40) - vertical spindle head Iso 30 (40) - universal high-speed head Schaublin E20 + ES 20 SWIVEL IN VERTICAL PLANE - vertical spindle head 360 ° Strokes and traverses  LONGITUDINAL STROKE : HANDWHEEL-OPERATED/AUTO. - table 320x300 mm - 1 turn of the wheel equals a long. traverse of 5 mm VERTICAL STROKE : HANDWHEEL-OPERATED/AUTOMATIC - knee 375/355 mm - 1 turn of the wheel equals a vert. traverse of 2 mm TRANSVERSE STROKE : ADJUSTING HANDLE - horizontal spindle head 150 mm - 1 turn of the wheel equals a cross traverse of 5 mm QUILL STROKE - vertical spindle head 60 mm ACCURACY ON READING ON MICROMETER VERNIERS Gbedpfx Ajfnrxwof Tjp - in all 3 traverses 0,02 mm Drive, motors, power feeds Main motor 1,5 kW 1500 rpm Approach-feed motor (rapid feeds) 0,45 kW 3000 rpm Coolant-system motor 0,15 kW 3000 rpm Spindle speeds (stepless) - 1st range 58-375 rpm - 2nd range 330-2000 rpm Working feeds - longitudinal or vertical 12-400 mm/min - 10 feeds, values in mm/min 12-18-26-38-57 85-125-185-270 400 Approach feed (rapid feed) - longitudinal or vertical 1200 mm/min errors and omissions, excepted data given without obligation Inventory Nr. 2180233 machine equipped with : 1 fix table with 4 T-slots 1 digital read-out Sony LM 31 - 3 axes 1 cooling device 1 lighting 1 chips vat 1 Rest 1 Mill fitter long long ISO 30 Ø 13x97 mm avec pivot 1 do Ø 16x97 mm 1 do Ø 22x137 mm 1 do Ø 27x156 mm 1 Mill fitter short ISO 30 Ø 16x29 1 do Ø 22x14 1 do Ø 22x37 1 do Ø 27x60 1 Mill fitter short ISO 30 for plates 1 Mill fitter cylindrical ISO 30 Ø 20 mm 1 do Ø 12 mm 1 do Ø 6 mm 1 Collet fitter ES-32 ISO 30 1 Set of 29 collets ES-32 various 1 Reduction sleeve Alesa ISO 30 / MT3

Condition: used, mileage: 230,870 km, power: 120 kW (163.15 HP), first registration: 05/2013, fuel type: diesel, empty load weight: 4,285 kg, maximum load weight: 715 kg, overall weight: 5,000 kg, axle configuration: 4x2, wheelbase: 3,665 mm, fuel: diesel, CO₂ emissions: 262 g/km, fuel consumption (urban): 11.3 l/100km, fuel consumption (extra-urban): 9.1 l/100km, fuel consumption (combined): 9.9 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 4, total length: 6,450 mm, loading space length: 2,600 mm, loading space width: 1,500 mm, loading space height: 1,800 mm, Year of construction: 2013, construction height: 2,980 mm, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, soot filter, traction control, The Mercedes-Benz Sprinter II 516 CDI is a used ambulance with automatic transmission and Euro 5 emissions standard. The vehicle was first registered on May 30, 2013 and has a mileage of 230,870 km. The diesel engine with a displacement of 2,143 cc produces 120 kW (163 hp). The car stands out in terms of color with its yellow-red daylight fluorescent color. Special features include air conditioning, Eberspächer auxiliary heating and bi-xenon headlights with cornering lights. The Sprinter offers reinforced front and rear axles, a 75-liter fuel tank and twin tires on the rear axle for greater stability. In the interior it is equipped with an Audio 20 radio, adjustable exterior mirrors with integrated indicators and a heat-insulated driver's cabin. Gbjdpfx Aer Uznyjf Tsp The vehicle has a combined fuel consumption of 9.9 l/100 km and CO2 emissions of 262 g/km. It has 4 seats, 4 doors and measures a total of 6,450 mm in length, 2,150 mm in width and 2,980 mm in height. Special equipment: 1 DIN slot at the front under the roof liner, passenger side airbag, starting aid (hill start assist), Audio 20 audio system (radio with CD player), exhaust in front of the left rear axle, outside temperature display, additional battery (reinforced), bi-xenon headlights with cornering light, 220 A generator, steering wheel (steering column mechanically adjustable), parameterizable special module, inside rear view mirror, rear wall with window, front mud flaps, reinforced rear stabilizer, reinforced front stabilizer, fuel level sensor for additional heating, cut-off relay for additional battery, rear wall paneling, fleece battery 95 Ah, preparation for mobile phone/cell phone/comfort telephony, reinforced front axle, thermal insulation in driver's compartment, additional heating (hot water) Other equipment: Adaptive brake light, driver's side airbag, washer fluid level display, electric outside mirror. adjustable and heated, both, exterior mirrors with integrated indicator light, battery 74 Ah, brake assistant, braking system with ABS+ASR, roof paneling in the driver's cab, lockable glove compartment, body/structure: flatbed, fuel tank: main tank 75 litres, headlight range control, truck registration, engine 2.1 litres - 120 kW CDI KAT, wheelbase 3665 mm, smoker's package, tire repair kit with compressor, low emissions according to Euro 5 emissions standard, seat belt system with warning system (driver's side), seat cover/upholstery: Lima fabric, Assyst maintenance interval display, heat-insulating glazing, permissible total weight 5.00 t, twin tires on 2nd axle/rear axle. CoC available Equipment was determined using a VIN query, errors can occur here for technical reasons Sale only to commercial operators (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: good (used), Working travels 300 x 150 x 355 mm Gbodpeu Eqixofx Af Tsp Table size 700 x 250 mm Spindle taper for collets ISO 30 Spindle speeds 58-2'000 rpm Digital read-out Misc.accessories MARCELS MASCHINEN CH

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 211031, Country of manufacture: Switzerland Voltage: 380/50/3 Gjdpfx Aow Uc Npjf Tjbp Net weight: 740 kg Overall dimensions: 155 x 110 x 160 cm Installed power: 2.10 kW Customs tariff number: 8459.6930 TECHNICAL SPECIFICATIONS Vertical rectangular table: - usable surface: 740 x 200 mm - number of T-slots: 2 - width of T-slots: 12-H7 - distance between slots: 120 mm Fixed right-angle table: - usable surface: 700 x 250 mm - number of T-slots: 5 - width of T-slots: 12-H7 - distance between slots: 40 mm - possible lateral movement: 250 mm total Universal tilting table: - usable surface: 600 x 210 mm - number of T-slots: 4 - width of T-slots: 12-H7 - distance between slots: 40 mm - possible lateral movement: 350 mm total Adjustable in 3 planes, on either side: 30°-45°-30° Spindle internal taper: - horizontal spindle head: ISO 30 (40) - vertical spindle head: ISO 30 (40) - universal rapid head: SV E20+ES20 Swivel in vertical plane: vertical spindle head: 360° Longitudinal travel, hand/automatic: 320/300 mm Vertical travel, hand/automatic: 375/355 mm Cross travel, adjustment handle: 150 mm Quill stroke: 60 mm Readout accuracy on micrometer verniers: 0.02 mm Main motor power/speed: 1.5 kW/1500 rpm Rapid feed motor power/speed: 0.45 kW/3000 rpm Coolant device motor power/speed: 0.15 kW/3000 rpm Spindle speed range: - 1st range: 58-375 rpm - 2nd range: 330-2000 rpm Feed rates (longitudinal or vertical): 12-400 mm/min - 10 feed rates, mm/min: 12-18-26-38-57-85-125-185-270-400 Rapid traverse speed (longitudinal or vertical): 1200 mm/min All technical data is given without obligation and subject to errors or omissions.

Condition: excellent (used), Universal Milling Machine Schaublin 53N Manufacturer: Schaublin Model: 53 N Table size: 1100 x 255 mm T-slots: 4 T-slot width: 14 mm T-slot pitch: 50 mm Longitudinal travel: 700 mm Longitudinal travel for spiral milling: 550 mm Vertical travel: 430 mm Cross travel: 250 mm Feeds, longitudinal/cross: 12 to 1000 mm/min Feeds, vertical: 6 to 500 mm/min Gsdpfx Afsyxgyhs Tjbp Rapid traverse, longitudinal/cross: 3500 mm/min Rapid traverse, vertical: 1750 mm/min Spindle speeds: 18 steps, 38 to 1500 rpm Spindle taper: VSM 33831 Size 44 Collet chuck: P25 Main drive power: 4 HP Main drive speed: 1425 rpm Machine weight: 1650 kg Space requirement: 226 x 172 x 165 cm No guarantee is given for the accuracy, completeness, or timeliness of this information.

Year of construction: 2022, condition: new, Motorized plate shear MS 1303 Technical data: Sheet metal width: 1350 mm Sheet metal thickness: 3.0 mm Distance between uprights: – Gbjdpfjhk Nfujx Af Tjp Table width: 400 mm Working height: 850 mm Control: conventional

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 4397, Ladies and Gentlemen, We are selling a Weiler Praktikant 160 AC lathe built in 1998 with original Weiler 3-axis digital readout. This newer version "AC" stands out above all due to the infinitely variable speed control, which makes working on the otherwise very user-friendly machine even easier. The machine has been extensively overhauled in our workshop so that it is technically and visually in excellent condition. All guides are in good order, the gears run quietly and the levers are easy to operate. You are welcome to visit us on site to see the condition for yourself. Availability: on request Machine no. 4397 Year of manufacture: 1998 Center height: 160mm Center width: 650mm Spindle passage: Ø 40mm Spindle speed: 20-3000 rpm stepless Tailstock taper holder: MK3 Quill stroke: 85mm Feed range longitudinal slide: 0.020 - 0.630 mm/rev Feed range cross slide: 0.006 - 0.200 mm/rev Possible thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.25 - 8mm Spindle brake: switchable Gjdsq H D U Eopfx Af Tebp Total connected load: 7.5 kvA Voltage: 400V Dimensions: approx. 1.58x0.9x1.5m (LxHxW) Weight: approx. 720kg Further equipment and accessories: 3-axis digital display, coolant device, chuck protection, jaw chuck and other accessories on request... Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice - On request, you can order additional accessories such as tools etc. directly with the machine - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation