ROTOX MILLING AND COPYING MACHINE

ROTOX KF 451

Condition: used, Year of construction: 1994, Technical details: saw blade diameter: 450 mm revolution per minute: 2820 U/min cutting lenght max.: 5000 mm cutting length min.: 240 mm air pressure - required: 6-8 bar hole of sawblade: 32 mm mitter cutting - both sides: 45+90 ° air-pressure connection: 6 - 8 bar total power requirement: ca. 4,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 6,05x1,49x1,79 m Ibodpfx Afsu Nigkoujc Further features of the machine: - Pneumatic vertical and horizontal tension - pneumatic mist spraying device - height adjustable machine feet - material supports movable with saw - piece counter Cutting diameter according to tabular cutting range diagram, as dependent on speed and saw blade. Accessories: - 2 spare saw blades Machine can be demonstrated under power. i.D. *

Condition: refurbished (used), Year of construction: 2024, Overhauled: 2024 Control: SPS Siemens S7 Saw blade max: 500 mm motor power 4,0 KW Saw blade feed: 0-40 mm/ s continuously adjustable Saw height control electronic Working range square 90° max.: 130 x 130 mm Working range flat 90° max.: 190 x 130 mm Working range round 90° max.: 170 mm The machine has been completely overhauled in our company and is in mint condition. Ibedsuiy Ngopfx Afuec Among other things, the following points were renewed: Conversion to Siemens S7 PLC control Conversion to Siemens HMI user interface Conversion to pusher with servo control New electrical components New pneumatic lines New pneumatic components Conversion to valve terminal Optimization of the suction capacity New minimum lubrication system Replacement of general wear parts Overhaul of the cab The machine also has Minimum quantity lubrication Splitting extension (for a high-quality cutting surface without return marks) Pre-loading magazine for gentle handling of painted/anodized surfaces Offcut ejector in the pusher Foldable offcut tray Optional: Magazine width 3000mm Pusher length 6000mm Pusher length 8000mm Reinforced motor 5.5 kW Mass clamping device for parallel sawing of several workpieces Online support connection Delivery and installation on your premises Training of your employees

Condition: used, Automatic in-line welding machine for PVC profiles (or similar), with a cycle fully controlled by PLC. Operating cycle: PLC with digital control of temperature and welding/cooling intervals via display. Ibjdjyw Rx Eopfx Afujc Adjustable profile support arms, facilitating positioning and ensuring operator safety. Machine in perfect working condition, subject to regular annual maintenance, complete with manual.

Condition: ready for operation (used), Year of construction: 1992, - Double mitre circular saw ADS type M - 2 saw heads - max. saw length 5000mm Ibedjucuhdjpfx Afusc

Condition: excellent (used), Year of construction: 2021, Cutting centre for standard profiles, as well as lift-and-slide door frames and thresholds, Thorwesten ASZ 3.2M in a special design. Processing length 6,500 mm for standard profiles and the Veka 82 system for lift-and-slide door frames and thresholds. Equipped with extended infeed and outfeed. Lifting and guide rollers located under the drive belts ensure smooth transport of sliding door frames. Stepless cutting angle adjustment from 22.5° to 157.5°. Automatic optimisation and processing of off-cuts. Saw blade diameter 500 mm. Includes dust extraction system and waste conveyor. Ibedjzhi Nhopfx Afuec Configured for the Veka profile system, including widening options and special profiles. Full HD panel with Windows 10 operating system.

Condition: excellent (used), Corner jointing machine Pressta Esiele PV10 P Ibjdpfol Skl Iex Afujc EU shipping approx. €350

Year of construction: 1998, condition: used, Technical details: profile width: 50 mm work height max.: 950 mm interface: RS 232 Pinout Window profile processing machine for materials such as plastic, aluminum and wooden windows in a continuous process. The materials are conveyed by a pneumatic transport and clamping system. The system consists of two work stations (machines), an electrical control cabinet, and a control panel and transport units. As well as columns with transport system vibrator, chip transport unit and column with receipt printer. Our photos are first taken from the location and then further pictures are how the plant is stored in our stock ready for transport. Workstation no. 1 (machine 1): -sawing station with saw blade Ø 400 x 4,5mm -drilling unit with clamping cartridge (vertical upwards) -drilling unit with clamping cartridge (hotizontal) -Boring with clamping cartridge (vertical down) Isdpfx Afju Ibuwjujbc -twin drilling unit with clamping cartridge (vertical down) -45° drilling unit with clamping cartridge (upwards) Working station no. 2 (machine 2): -drilling unit with clamping cartridge (vertical upwards) -milling spindle horizontal with 11 side milling cutters -Drilling unit with clamping cartridge (vertical down) -Drilling unit with clamping cartridge (vertical upwards) -Drilling unit with clamping cartridge horizontal 2 transport units: motor driven -LxWxH: 5.650 x 2.400 x 1.000mm -track width 1.980mm 2 pieces transport units: motor driven -LxWxH: 2.150 x 2.750 x 1.050mm -track width 2.300mm *

Year of construction: 2004, condition: good (used), machine/vehicle number: 2004-3-11A, - Feed of the milling head manually - Work table height adjustable via handwheel - Horizontal and vertical material clamping - Milling cutter diameter up to 250 mm - Max. milling height 150 mm - Max. milling depth 80 mm - Max. milling length 305 mm - Angle-adjustable stop, left and right 20 - 90° - Milling spindle speed 4500 rpm - Drive 400 V, 3.2 kW - Compressed air connection 6 - 8 bar Ibjdpfx Afsf E Higjusc - Air consumption per working cycle 10 l - Pneumatic profile clamping - Table stand - Space required approx. W 1100 x H 1300 x D 700 mm - Weight approx. 200 kg

Condition: good (used), Year of construction: 2009, Parts shown by hand not come. Iodpezk I R Aefx Afujbc Technical data shown on pictures.

Condition: good (used), Year of construction: 2004, functionality: fully functional, total height: 2,500 mm, total length: 11,500 mm, total width: 3,800 mm, Soenen Hendrik DEM 3 machining centre, year of manufacture 2003-2004, equipped with tooling for processing water drainage slots and ventilation in PVC profiles, including screwing and drilling handle inserts in steel. The machine consists of a loading table with a magazine for 12 profiles, a machining unit, and an outfeed table with a magazine for 12 profiles. The machine is in good condition, has been dismantled, and is currently stored in our warehouse. A video of the system was recorded prior to dismantling and can be viewed upon request. The machine is programmed for Kömmerling 76mm AD and MD profiles; other profiles can be programmed on request. The price includes dismantling and loading onto a truck. Isdporztl Sefx Afuobc