Hydraulic Press

Rhodes 60ton

Condition: used, material width 300 mm coil weight 3 t material thickness 2 - 4 mm Straightener, 7 rolls, Make. Schleicher, Type RM 6-95/160 - band width 300 mm - band thickness 2 – 4 mm - cross cut 1200 mm² - voltage 220/380 V 50 Hz - total power requirement 3,1 kW coiler with press roll, Make Schleicher, Type H-3 - Coil weight 3 t - Band width 400 mm - voltage 220/380 V 50 Hz - total power requirement 3,92 kW Gtjdpfx Adocdrmmemjt without control

Year of construction: 1970, condition: used, machine/vehicle number: 12469, Hydraulic press, single-column quick-cycle press, C-column press, oil-hydraulic press Gtsdpfxsb A Tcfj Admot - Press force ram: 40 to -Clamping table: 800 x 560 mm -Insertion height: 750 mm - Projection: 300 mm -Max. Stroke: 350mm -Operation: two-handed -Dimensions: 1700/1350/H3200 mm -Weight: about 5000 kg

Year of construction: 2008, condition: excellent (used), SMG HZPU 8000-3000/2100-S1 Hydraulic Drawing Press Brand SMG Type HZPU 8000-3000/2100-S1 Year 1995 Gtjdpfen Awd Rex Admot Description Hydraulic Drawing Press H frame hydraulic press Pressing force 800 ton Clamping area Approx. 3,000 x 2,100 mm Installation height Max. 1,400 mm

Condition: used, pressure 200 t distance between columns 1600 mm max. ram stroke 600 mm dayligth 900 mm table width 1600 mm table depth 1300 mm table height 1060 mm ram surface 1600 x 1300 mm T-slots Din 650 / 22H12 rapid traverse 400 mm/s return speed 325 mm/s pressing speed 42 mm/s bei 40% mm/sec Gtodpeg S R Twsfx Admst pressing speed 20 mm/s bei 100% mm/sec die-cushion pressure 800 kN die cushion stroke 150 mm speed of die cushion auf 68/ ab 225 mm/s

Condition: used, Year of construction: 1991, pressure:650 t Godpfx Aofhmuvsdmjtt passage width:920 mm stroke:1750 mm weight of the machine ca.:ca. 47 t Table area:2000 x 1500 mm ram surface:2000 x 1500 mm Daylight Opening:2100 mm Hydraulic:203 bar closing speed:500 mm/min pressing speed:0,5 - 10,4 mm/sec opening speed:250 mm/sec Solve speed:0,5 - 66,4 mm/sec Return Capacity:150 t total power requirement:75 kW Measurements (approx.):4,4 x 2,5 x 7,5 m

Condition: good (used), machine/vehicle number: 2249, Year of construction: 1989, load capacity: 32,000 kg, lifting height: 6,500 mm, mast type: duplex, fork carriage width: 300 mm, fork length: 2,500 mm, total length: 6,800 mm, total width: 3,400 mm, operation weight: 42,800 kg, additional equipment features: Centralized greasing system, Kalmar DCB32-1200 from Uniktruck Gtodsquwf Iepfx Admjt

Condition: used, Strip Processing Line, Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Very well equipped with feed-in aids Required floor space for the entire line (L x W): approx. 7000 x 3000 mm Total weight: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rolls: 7 Straightening roll diameter: Ø 40 mm Number of pinch rolls: 2 Pinch roll diameter: Ø 80 mm Entry height/pass-through height: 1500 mm - Straightening rolls hardened, ground and hard-chromed, with central support - Pinch rolls hardened, ground and hard-chromed, with hydraulic lifting - Manual straightening roll adjustment - Feed assist with hydraulically extendable tongue and hydraulically adjustable deflection pulley - Adjustable side strip guides - All straightening rolls driven via distribution gearbox and cardan shafts - Both pinch rolls driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightener opening stroke 250 mm for cleaning or for processing thicker material, lifting by trapezoidal-thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Net weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Outer coil diameter: max. 1600 mm (with load carriage) Outer coil diameter: max. 2000 mm (without load carriage) Diameter of coil turntable: Ø 1700 mm Coil inner diameter, expansion range: 460–520 mm Coil width, nominal: max. 630 mm Expansion jaw width: 750 mm Height of decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear - Pneumatic overrun brake on the decoiler drum (TWINFLEX) - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic pressure arm with hydraulically driven double pendulum roller - Coil loading carriage with 12-ton lifting capacity and 300 mm stroke - Decoiler on elevated travel frame with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Net weight: approx. 5 tons Central Hydraulic Power Unit (adjacent) Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2x REXROTH tandem pumps - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Net weight: approx. 800 kg Electrical Cabinet (adjacent) - All cable connections via Harting connectors Gsdpfeif Sg Sox Admstt Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Net weight: approx. 800 kg

Condition: used, grinding length 1000 mm grinding width 750 mm Gedsxukqyjpfx Admott workpiece height 700 mm Control SIEMENS, SIMATIC S 7-1500 table surface area 1050 x 640 mm table height over floor 1000 mm table speeds 3.000 - 30.000 mm/min cross feed of table continual 5 - 5.000 mm/min cross feed of table intermittent 0,1 - 65,0 mm vertical adjustment, 1 graduation 0,002 mm rapid traverse vertical 0,25 m/min grinding spindle speed 50 - 2.500 U/min grinding wheel size ø 400 x 50 x ø 127 mm workpiece weight max. 1.000 kg table load max. 1600 kg total power requirement 33,2 kW weight of the machine ca. 9,3 t dimensions of machine L x W x H 4,50 x 2,37 x 2,65 m - complete electronic / electric renewed in 2018 Accessories: magnetic plate 1000 x 650 mm, grinding wheel with flange, wheel trueing attachment, extraction

Condition: good (used), machine/vehicle number: 2439, Year of construction: 2001, load capacity: 16,000 kg, lifting height: 4,090 mm, mast type: duplex, fork carriage width: 280 mm, fork length: 2,200 mm, total length: 5,400 mm, total width: 2,560 mm, operation weight: 24,320 kg, additional equipment features: Dual tread, Front mud guards, Engine heater, Equipment: lighting, Kalmar DCD160-12 from Uniktruck Gtedpfx Ajquwg Nodmet

Condition: good (used), Year of construction: 1994, operating hours: 14,000 h, * Diesel forklift * 14,000 operating hours * Lifting capacity 16,000 kg * Volvo engine * Mast lifting height 5,000 mm * Overall height 4,100 mm * Fork positioner * Own weight 25,000 kg Gtjdpfx Adjw Hydpsmet * Immediately ready for use