1528-L

RAPID

Condition: ready for operation (used), Year of construction: 2009, machine/vehicle number: 19500648, functionality: fully functional, workpiece length (max.): 3,500 mm, workpiece width (max.): 130 mm, workpiece height (max.): 120 mm, TECHNICAL DETAILS Max. profile length: 3,500 mm Max. profile width: 130 mm Max. profile height: 120 mm MACHINE DETAILS Number of milling and drilling units: 7 Max. Friedrichs motor speed: 18,000 rpm Max. machine motor speed: 1,500 rpm Electrical operating voltage: 400 V, 50 Hz Required network voltage: 20 kW Cable connections: 400 V NPE Operating height of the control cabinet: 1,050 mm Pneumatic operating pressure: 6 - 7 bar Pressure consumption per cycle: Approx. 3,500 NI Ncjdey Sy Nijpfx Amnst Pneumatic line pressure at 70 °C: Approx. 15 bar EQUIPMENT Automatic screw feed Arrangement of the units: On a rotating table, enabling machining at various angles.

Condition: good (used), Year of construction: 2000, 20000 rpm, Nsdper Urm Sefx Amnsct tool measurement on table will come, Parts shown by hand not come.

Condition: used, Technical details: saw blade diameter: 420 mm cutting lenght max.: 5000 mm cutting range: H x B: 180 x 100 mm air pressure - required: 6 bar mitter cutting - both sides: 45° - 90° (manuell) ° voltage: 380 / 220 V total power requirement: ca. 8,0 kW weight of the machine ca.: auf Anfrage t dimension machine xH: 6,4 x 1,3 x 2,0 m Circular saw with 2x sawhorses for cutting profiles with inclined cuts up to 45°. microprocessor positioning control BECKHOFF E 70-300 with absolute encoder, digital display travel per saw block = 2350mm, motorized Clamping cylinder for each horizontal and vertical, manual flushing device hydropneumatic feed use of carbide saw blades i.D. Njdpfx Aeu Nigwomnect *

Condition: excellent (used), MKW Collating Machine Spare Parts: 2 Knives, Suction Device, Frequency Converter, Drive Belt • For sale: 2 knives for an MKW Rapid UT equipped with SFT 350 front trimmer. • Suitable for MKW Rapid UT saddle stitchers • Unit: SFT 350 front trimmer • Condition: used / re-sharpened / ready for use • Quantity: 2 pieces (upper knife + lower knife) • Ideal as spare parts or reserve for bookbinding / booklet production. • 1 x 7 cm and 1 x 7.5 cm knife length • MKW Rapid UT • SFT 350 • SFT350 knife • Front trim knife • Fronttrimmer knife • Stitching line knife • Saddle stitcher knife • Booklet maker knife • Collating machine spare parts • MKW spare parts Ncedpfxsyuxqps Amnst MKW Frequency Converter I/O Module Standard (Part no. 410629) Spare part for MKW drive electronics • Designation: E82ZAFSC001 • Type: I/O Module Standard • Suitable for Lenze frequency inverter series 8200 • Ideal as a spare part for industrial automation, printing presses, conveying technology, or machinery controls. 10 machines available – bulk purchase negotiable for a very attractive total price. Quick transaction preferred!

Condition: used, Year of construction: 2002, Machining dimensions (tool diameter 25mm): X=3015 mm Y=1483 mm Z=325 mm Max. travels: X=3268 mm Y=1483 mm Z=325 mm Max. programming speed: X/Y = 75 m/min / Z = 30m/min Tool holder HSK 63F Drilling unit 7964, 14 vertical drilling spindles with 32 mm grid (10 in x / 4 in y) Sawing unit 7946 3.6 kW, 90° pneumatically pivotable Milling unit 7933 9 kW Wood Her Vector axis (C-axis) Tool magazine (6 disk places) Hand control unit Laser device (positioning of the suction cups) PC control panel with 17" monitor Operating system Windows 2000 Software: TwinCAM32 - office version Vacuum pump 100 m³/h Dry running Selective safety mats (3-field division) Storage location: Nattheim Ncjdpfx Asvvi Nbemnst

Condition: used, Year of construction: 1997, functionality: fully functional, total length: 11,000 mm, RAPID Maschinenbau, TYPE: RSE, SERIES 1005, YEAR 1997 Operational. Used for cutting timber frame components and simple roof truss elements. -Horizontal swivel range from 15° left to 15° right, indicated on a display. -Vertical swivel range from 40° left to 90° right, indicated on a display. -Right-hand length stop, indicated on a display. -Documentation in German, including instructions on how to calibrate and reset. -Two-hand operation. -2 vertical clamping cylinders + 2 horizontal clamping cylinders. -Left roller conveyor, approximately 4000 mm long. -Right roller conveyor, approximately 6500 mm long. Ncedpfxsy Exxve Amnot -Minimum operating air pressure: 6.5 bar. +Additionally, an industrial filter system EUROPAC CT-101, year 2008, is included. -The red box shown in the photo is not included. youtube.com/shorts/pj_alOG0Xpo?si=MLVmkJXTL_xWzoif Please feel free to ask any questions or inquire about the price.

Condition: used, Double Mitre Saw RAPID Type DGL 5000 / 500 In need of repair - control unit non-functional Year of manufacture: 1993 Ncodeyxy S Depfx Amnjt Cutting length: 5000 mm Shortest cut length: 350 mm Saw blade diameter: 500 mm - Control unit non-functional Space requirement (L x W x H): 7200 x 1700 x 1850 mm Weight: 1250 kg We are making space Affordable machine – ideal for export

Condition: excellent (used), Year of construction: 2006, FAMUP MCP 45 CNC machining center TECHNICAL DATA axes Number of axes: 3 X-axis: 450 mm Y-axis: 300 mm Z-axis: 400 mm Feed rate Work feed X,Y,Z: 10`000 mm/min Rapid feed X,Y,Z: 30`000 mm/min Working pressure force X,Y: 2000 N Working pressure force Z: 3300 N Pallet Dimensions: 400 x 300 mm Number of grooves: 2 Groove width: 14 mm Groove spacing: 80 mm Max. Table load: 100 kg Ncedpfx Ajq U Rm Homnet Changeover time: 9 sec. Spindle Spindle motor power: 5 kW Speed: 10`000 rpm Tool changer Magazine slots: 16 Max. Tool diameter: 63 mm Max. Tool length: 150 mm Max. Tool weight: 4 kg Tool change time: 1.7 sec Weight: Approx. 3000 kg No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: excellent (used), Screening and sorting machine for bulk materials or small metal components. Very good condition – complete, equipped with original drive, control cabinet, and a set of calibration screens. • Manufacturer: SCHWANOG Günter KG, Villingen / Schwarzwald • Model: RAPID SBM 63G • Year of manufacture: 1972 • Drive: Bauknecht motor 0.55 kW, 380/220 V, 2850 rpm • Control cabinet: Carl Kurt Walther GmbH, Wuppertal • Robust steel construction, stable frame with transport wheels • Power supply: three-phase 400 V • Complete set of screening sieves in wooden frames (numbers 1–6) • Sieve mesh range: from 2 mm to 15 mm • Adjustable and exchangeable screens • Main switch, start/stop controls, and overload protection • Very good condition – dismantled from the plant, mechanically fully functional The machine is ready for operation after a basic inspection. Ideal for: metalworking shops, foundries, industrial laboratories, sorting granulates, sand, or components. Ncjdpfoxmt Eqsx Amnjt

Condition: good (used), Rapid Load 12 Bar feeder Bar Loader Turn diameter bed: mm Turn diameter support: mm Passage: 6-80mm Turning length: 150-1215mm X axis: mm Y-axis: mm Z-axis: mm Turning speed: - Rev/min Cone: Longitudinal displacement drilling head (X axis): mm Arm travel height (Y axis): mm Min distance column -- drilling spindle (X axis): mm Max distance column -- drilling spindle (X axis): mm Spindle diameter: mm Max drilling depth: mm Max drilling depth: x mm Bed dimensions: x mm Cutting length: mm Cutting thickness: mm Control: Fanuc Year of construction: 1997 Operating hours: Transport dimensions: 166x60x105 cm (LxWxH) Documentation available Location: Hamont-Achel, Belgium Rapid Load 12 Bar feeder Bar Loader Bed turning diameter: mm Support turning diameter: mm Throughput: 6-80mm Turning length: 150-1215mm X-axis: mm Y-axis: mm Z-axis: mm Speed: Rpm Taper: Drill head longitudinal displacement (X-axis): mm Arm height displacement (Y-axis): mm Min distance column -- drill spindle (X-axis): mm Max distance column -- drill spindle (X-axis): mm Spindle diameter: mm Max drilling depth: mm Max clamping: x mm Bed dimensions: x mm Cutting length: mm Cutting thickness: mm Control: Fanuc Year of construction: 1997 Operating hours: Transport dimensions: 166x60x105 cm (LxWxH) Documentation present Location: Hamont-Achel, Belgium Rapid Load 12 Stangenlader Bettdrehdurchmesser: mm Drehdurchmesserunterstützung: mm Ncodpsuhznbefx Amnjt Opening range: 6-80 mm Drehlänge: 150-1215 mm X axis: mm Y-axis: mm Z-axis: mm Speed: - U/min Cone: Längsverschiebung des Bohrkopfes (X-Achse): mm Armhöhenverschiebung (Y axis): mm Minimum distance between sleeve and drilling spindle (X axis): mm Maximal distance between module and drilling spindle (X axis): mm Spindle diameter: mm Max. Drilling depth: mm Maximal machining wall: x mm Bettmaße: x mm Schnittlänge: mm Schnittstärke: mm Steuerung: Fanuc Construction year: 1997 Betriebszeiten: Transportmaße: 166x60x105 cm (LxWxH) Documentation verfügbar Standort: Hamont-Achel, Belgium

Condition: used, Year of construction: 2005, - Fagor 8055 CNC control - Additional tank for internal spindle cooling (15 bar) 400 liters - Year of construction 2005 Technical data: - Travel X/Y/Z: 610 / 455 / 520 mm - Rapid traverse: 24 m/min Ncedpfx Ajtvf Htomnet - Working spindle speed: 8000 rpm - Tool holder: BT40 - Table size: 762 x 363 mm - Maximum table load: 350 kg - Motor power: 18 kW - Operating voltage: 400 V - Weight: 3140 kg

Condition: used, Year of construction: 1993, total length: 1,700 mm, total height: 2,880 mm, total width: 1,600 mm, Colour: Grey Empty weight: 2.000 kg - Year: 1993 - Documentation available: No Njdsy H Incepfx Amnect - CE certificate present: No - Serial number: 70.504 - Main motor power [kW]: 37 - Rotor width [mm]: 780 - Number of shafts [pcs.]: 1 - Opening width [mm]: 440 - Opening length [mm]: 1000 - Sieve perforation [mm]: 7 - Number of fixed knives [pcs.]: 4 - Transport dimensions: 1700mm x 1600mm x 2880mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2000, machine/vehicle number: 19500484, functionality: fully functional, operating hours: 50,000 h, Machine is still working, selling because of new machine coming. Ncsdpfjy Nzbusx Amnet Machine is selling cheap because we need space the price is urgent

Condition: good (used), Year of construction: 2000, High-performance CNC vertical machining centre with SIEMENS 840 D, 2-fold pallet changer, IKZ, linear guides and 30-fold WZW table size 2 x 1000 x 450 mm tool holder DIN 69871 ISO 40 travel X-axis 1100 mm Y-axis 500 mm Z-axis 640 mm speed range 50 - 10.000 rpm table load 600 kg feed range, X/Y/Z, infinitely variable - 10000 mm/min rapid traverse in all axes 30 m/min Drive power 18,5 kW Machine dimensions L x W x H approx. 3605 x 3041 x 3220 mm weight approx. 6700 kg Accessories / special features: - CNC-control SIEMENS 840 D - 2-fold pallet changer - 30-fold tool changer - Full protection cabin with safety doors, electrically protected Nedpfsd I R E Njx Amnect - High speed up to 10.000 rpm and drive power with 18,5 kW - Linear guides with double recirculating roller shoe, allowing high torques to be absorbed uniformly in all directions - Ball screw spindles in all 3-axes - The entire machine bed is made of Meehanit cast iron and ensures precision, rigidity and vibration damping - Tool holder DIN 69871, ISO 40 - Hinged chip conveyor with integrated coolant system - 4th axis already prepared - CE-conform Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: excellent (used), machine/vehicle number: 5950798, WITH EMBOSSING UNIT FROM ABOVE AND BOTTOM Ncsdpfx Amevf Iubsnet Equipment / Additional information: With heating Also very interesting for the textile industry