Steady rest Ø 400–800 mm

POREBA Lünette 400-800 mm

Condition: excellent (used), Year of construction: 1991, swing diameter 400 mm Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : Nsdpjxyllvjfx Aqwjda WMW - GLAUCHAU Hydraulic Internal Grinding Machine with Face Grinding Device model SI 6/1 AS-N x 315 year 1991 Internal grinding diameter 40 - 400 mm Internal Grinding depth, max. 315 mm Max. grindable External dia. 400 mm Weight of workpiece without steady, max. 630 kg Workpiece Swing Ø, with / without safety hood, max. 500 / 600 mm Height of centre above table 360 mm 16 step workpiece spindle speeds 40 – 400 rpm Workpiece spindle bore, approx. 53 mm Workpiece headstock swivelling max. 30 ° Adjustment of workpiece headstock position crosswise, max. 400 mm Automatic cross traverse of grinding head 70 mm Adjustment of grinding head position on slide crosswise, approx. 100 mm Feed of grinding head, intemittendly 0.001 – 0.025 mm/stroke Feed of grinding head, continually 0,1 – 1 mm/min Table stroke, max. 630 mm Table speeds infinitely variable 0,1 – 8 m/min (10 m/min) Distance workpiece headstock and grinding slide, max. 1,250 mm Adjustment of Grinding spindel stock on table 520 mm Spindle drive, approx. 7.5 kW Total electrical load, approx. 17 kW - 380 V - 50 Hz Weight, approx. 6,000 kg Accessories / Special Features: • Universal internal grinding spindle head with automatic cycles to grind cylindrical and conical bores with one or multiple diameters, external diameters and grinding of narrow end-faces. • Face grinding device, hydraulic swivel-in, with automatic cycles to grind end-faces, multiple end-faces and two tiered end-faces simultaneously • Electronic cycle control with control tableau to set up all the grinding and dressing cycles including ampere-meters for internal grinding spindle and face grinding spindle • Belt-type grinding spindle drive with mounted grinding spindle and 5 pieces separate interchangeable grinding spindles along with various pulleys with various diameters. • Dressing device for both grinding spindles • HEIDENHAIN Digital Read-Out for the cross adjustment of the Workpiece headstock • A large amount of operating tooling and accessories as : 4-jaw Faceplate Ø approx. 520 mm, 3-jaw chuck Ø approx. 380 mm, 3-jaw-chuck Ø approx. 130 mm, pulleys, spindle sleeves, grinding flanges, foot switch, • Separate hydraulic unit, built on switch cabinet, coolant device with magnetic separator. Condition : very good, universal machine for all sorts of grinding tasks ! Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading

Condition: good (used), Year of construction: 1984, max. wheel diameter 250 mm gear width 275 mm max. module 6 weight of the machine ca. 5,5 t The gear hobbing machine ZFWZ 250 is suitable for the economical production of all hob-processable cylindrical gear types, such a: - spur and helical gear, wormgears and worms, splined shafts, keyed shafts, serrated profiles, chain wheels and ratchet wheels,as well as conical and crowned spur and helical gears. Nedpfsv T Nqaox Aqweda Interchangeable wheels and milling accessories Technical data: - Workpiece diameter (max): 250 mm - Module (max): 6 mm - Axial feed travel (max): 275 mm - Tangential feed travel (max): 100 mm - Tooth helix angle (max): 45 degrees - Milling cutter diameter (max): 145 mm - Milling cutter length (max): 170 mm - Table clamping surface (min): 195 mm - Table clamping surface (max): 470 mm Power Milling cutter speeds - Stepped in 2 ranges: 56 ... 250 rpm - (Standard version): 90 ... 400 rpm - Infinitely variable in 2 ranges: 63 ... 180 rpm - (special version DC motor): 140 ... 400 rpm Weights - Machine net: approx. 5000 kg - Electrical cabinet: approx. 800 kg - Hydraulic unit + coolant tank + chip transport: approx. 700 kg Overall dimensions (with oil mist filter) - Length: Standard version: 3950 mm DC drive: 3450 mm (or 3350 mm according to table) - Width: 3300 mm - Height: Machine: 1980 mm Machine with DC drive: 2150 mm Electrical cabinet: 2200 mm

Year of construction: 2019, operating hours: 5,500 h, condition: excellent (used), functionality: fully functional, The equipment must be removed by May 26, 2023 – a bid obligates the bidder to dismantle and remove the equipment within the specified timeframe. TECHNICAL DETAILS: Nedpfok H D Hasx Aqwjda Maximum workpiece size: 1050 x 820 x 300 mm Maximum workpiece weight: 1,000 kg Travel distances: 600 x 400 mm Wire diameter: 0.1 – 0.3 mm Machine weight: 3,000 kg Control system: Fanuc 31i –WB Footprint: 2,440 x 2,680 mm Machine hours: 5,500 operating hours

Condition: good (used), Manufacturer: POREBA Type: TPK 90 / 110 Year of manufacture: 1994 Swing steady 1 is 150 mm Nodewrrbkjpfx Aqwsda Swing steady 2 is 350 mm Swing steady 3 is 500 mm 3 units suitable for TPK 90 (or with spacers TPK 110) Spacers are not included 2nd tool post to be mounted on slide Specifications Metric US Standard There are (still) no specifications for this machine. Dimensions (Estimate) Length 1200 mm Width 800 mm Height 1000 mm Weight 1800 kg Please note: The information on this page has been obtained by us to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representation or contract terms. We recommend you check all important details.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, TECHNICAL DETAILS X-axis travel: 1,000 mm Y-axis travel: 550 mm Z-axis travel: 500 mm Clamping surface: 1,100 mm x 500 mm Rapid traverse X/Y: 36 m/min Rapid traverse Z: 30 m/min Feed rate: 24,000 mm/min Spindle speed range: 12,000 rpm Number of tools in magazine: 30 pcs Nsdpfxjy Iztus Aqwoda Tool holder: BT 40 MACHINE DETAILS Control: Fanuc 0i EQUIPMENT Chip conveyor Internal coolant supply HWACHEON Automatic Workpiece Changer Magazine capacity: 8 pallets Max. workpiece size, rectangular: 420 x 170 mm Max. workpiece size, round: 300 mm diameter

Condition: used, Year of construction: 1993, spindle diameter 100 mm x-travel 1250 mm y-travel 1100 mm z-travel 950 mm Table load 3000 kg table surface area 1000x1120 mm turning speeds 16-1250 U/min spindle taper ISO 50 Control Heidenhain weight of the machine ca. 13,4 t No. 2022 Nedpfxeyuttfo Aqweda The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2015, operating hours: 21,934 h, CMZ TC 35 Y-800 Swing over bed / carriage: 920 / 745 mm Maximum turning diameter: 550 mm Distance spindle – tailstock: 866 mm Travel X / Y / Z / B: 310 / +80 / −60 / 800 / 803 mm Rapid traverse X / Z / B: 30 m/min Rapid traverse Y: 15 m/min Main spindle: Maximum speed: 3,000 rpm Power: 45 / 39 kW at 1,500 / 1,273 Nm Bearing outer / inner: 240 / 160 mm Spindle bore: 106 mm Bar capacity: 95 mm Chuck diameter: 315 mm Tailstock: Quill diameter / stroke: 110 / 150 mm Travel: 800 mm Tool turret: 12 positions, all with driven tools Maximum speed: 4,000 rpm Power: 16 kW Maximum torque: 75 Nm CNC control: FANUC 32i TB Voltage: 400 V / 50 Hz Connected load: 65 kVA Dimensions: approx. L x W x H 3 x 2 x 2.2 m Weight: approx. 8.3 t Operating hours: approx. 21,934 hrs Ndjdjymc Trspfx Aqwja Scope of supply: Bar feeder BREUNING IRCO ILS-MUK 10016-II, year 2015 Coolant unit

Condition: excellent (used), Year of construction: 2001, Length:1200mm Width:800mm Ndodpfx Ajx Tp Dxeqwsa Height:1200mm Weight:290kg

Condition: ready for operation (used), SYKES 5 E MODEL, 2 UNITS AVAILABLE Double helical gear cutting, herringbone gear generator SYKES 1600 mm Special machine for gear power transmissions, oil, petrol & gas industry. In very good working condition. Specifications: Work spindle bore: 8.75" (222 mm) Tailstock to face of work spindle, max: 48" (1219 mm) Standard cutter diameter: 6" P.C.D. Standard cutter bore: 3.5" EXTERNAL GEARS: Blank diameter, max: 63" (1600 mm) Min: 0 Face width, double helical: 0 - 18" (0 - 457 mm) Face width, spur or single helical: 0 - 10" (0 - 254 mm) INTERNAL GEARS: Blank diameter, max: 66" (1676 mm) Face width: 0 - 8" (0 - 203 mm) Njdpfx Aex Rvgusqweda P.C.D., max: 66" - (2 x rim thickness) Pitch range, max: 16 D.P. (1.6 Mod) Min: 1.5 D.P. (17 Mod) Helix angle range: 0 - 45 degrees Dimensions: 3300 mm (L), 3250 mm (W), 2700 mm (H) Weight: 18,940 kg

Condition: used, functionality: fully functional, Maximum working diameter: 2100 mm Table size: 1800 mm Minimum diameter: 200 mm Njdpfx Aoylprfsqwoda Maximum number of teeth: 45 Max. module: 20 Weight: 40 tons