Control rack

Philips MAHO MH 800C

Condition: used, Control panel, touch screen, control panel, display, operator panel, PLC, Simatic Panel PC, touch screen, touch panel, Simatic Multi Panel, Touch Multi Panel, Touch Panel Njdpoq T T Nwjfx Agwscp -Manufacturer: NFI Electronics, touch panel from CNC milling machine MAHO MH 800C -Type: 1435-18-22 -Total dimensions: 340/310/H30 mm -Weight: 0.8 kg

Condition: used, Year of construction: 1990, x-travel 400 mm y-travel 330 mm z-travel 350 mm total power requirement 6,3 kW weight of the machine ca. 2 t Ncjdpfx Agot Hxbwjwjp dimensions of the machine ca. 736 m

Condition: used, Column Drilling Machine ALZMETALL Type AB 3 ESV Machine No. 15967 Year of manufacture 1977 Drilling capacity: 32 mm Spindle taper: MT 3 – short quill Distance spindle nose – table: 545 mm (short quill) Distance spindle adapter – table: 395 mm (MT adapter) Throat: 290 mm Quill stroke: 160 mm Table size: Ø 545 mm Ncsdpfx Ajharwvjgwop Column diameter: 220 mm Spindle speed: 55 – 1450 rpm, stepless Motor power: 1 / 1.6 kW Supply voltage: 380 Volt, 50 Hz - Spindle speed via 2 gearbox stages, 2 motor speeds and stepless through variable-speed drive - Intermediate gear stage for high torque at low speeds - MT adapter from MT3 to MT4 - Automatic feed 0.1 – 0.2 – 0.3 mm/rev - Swiveling drill table - Table height adjustment via hand crank - Heavy machine base with machined workpiece support surface (not original Alzmetall) - Work area lighting Space required (L x W x H): 1150 x 650 x 2000 mm Weight: 850 kg Good condition

Condition: used, Year of construction: 1992, Technical details: x-travel: 800 mm y-travel: 550 mm z-travel: 500 mm spindle taper ISO: SK 40 control: Philips 532 quill stroke vertical: 80 mm turning speed range: 0-600 und 600-4000 steples U/min feed:: 1 - 3000 mm/min. rapid traverse: 6 m/min table surface area: 1100 x 600 mm table feed: 1 - 3000 /stufenlos mm/min switched on hours: 82194 h total power requirement: 9,6 (12 kVA) kW weight approx.: 4200 kg dimension machine xH: 2,9 x 2,2 x 2,5 m The machine is located in the technical department. further technical data: - vertical adjustment table (z-axis) 500mm - Headstock throat depth: min./max.: 200 / 750 mm Equipment: -coolant tank with pump -Manual control unit (hand operated) Njdju Nda Espfx Agwecp -linear measuring system Heidenhain *

Condition: used, Year of construction: 1974, Technical details: turning diameter over bed: 500 mm turning diameter over support: 300 mm turning length: 2100 mm centre distance: 2000 mm spindle passage: Bohrung ca. Ø 60 mm range of revolution per miute: 35,5 - 1800 / 18 step U/min rapid motion - x-axis: Support 4,2 m/min tailstock quill taper MT: MK 5 tailstock quill adjustment: 180 mm control voltage: 220 V weight of the machine ca.: 3,25 t dimension machine xH: 3,5 x 1,2 x 1,6 m Thread cutting possible, e.g. metric thread, module thread and inch threadEilgang Quersupport Futterschutz 2x Späneauffangwanne Nedju Ix Dcspfx Agwecp Zubehör: (siehe vergleichbar auf Foto) 2x Lünette (1x geschlossen und 1x offen) Planscheibe 3-Backenfutter Backenpaare Flansch Spitzen div. Zahnräder *

Year of construction: 1990, condition: ready for operation (used), Two nearly identical Maho milling machines, one with and one without a tool changer, as well as a complete range of accessories/spare parts, are available. Travel X/Y/Z: 600mm/450mm/450mm, tool holder: ISO40, quill stroke: 80mm, spindle speed: 5000rpm, feed rate: 4m/min, rapid traverse: 6m/min. Tool diameter: 130mm/100mm, max. tool length: 250mm, max. tool weight: 6kg. Machine dimensions: approx. 3150mm/3750mm/2150mm, weight: approx. 3600kg. Documentation available. On-site inspection possible. Ncjdpfx Agjxu I Atewjp

Condition: used, Year of construction: 1987, Technical details: x-travel: 700 mm y-travel: 500 mm z-travel: 600 mm table swivelling +/-: A-Achse: 20° / 60° Grad table rotating: B-Achse: 360° Grad control: Maho 432 (3-D Bahnsteuerung) Max. Milling-capacity: ST: 60 und GG: 22 mm tool changer with: 24 Plätze number of spindle speeds: 20 - 6300 U/min. max. table load: 200 kg spindle taper MT: ISO 40 (hydr. Spannung) spindle head swivable left - right: 90° (manuell) ° quill stroke: 80 mm feed range: X/Z: 1 - 3000 und Y: 1 - 4000 und B: 0,1 - 3000°/min. mm/min rapid traverse:: X/Z: 10 und Y: 8 und B: 20 U/min. m/min control voltage: 110/220 V total power requirement: ca. 20 kVA Weight approx.: 5,5 t dimension machine xH: 3,0 x 2,4 x 2,25 m space requirements of the machine approx.: 5,2 x 5,0 x H: 2,3 m NC rotary table Ø 520 mm with A and B axes Adjustable three-phase motor with 4-stage reduction gear Working spindle can be swiveled out for horizontal spindle Equipment: -manual control unit -coolant device Ncedju Idbyopfx Agwep -machine ilumination *

Condition: good (used), Please read the technical specifications carefully. If the machine is of interest to you as an investment, we kindly ask that you provide full identification, including a correct phone number and email address, when requesting an offer. DECKEL Milling Machine Toolroom Milling Machine DMU 35 M 3 x 2 axes CNC Milling Machine With SIEMENS 810 D – ShopMill software Year of manufacture: 2001 and 2003 (2 units available) Nedpexz Rdaefx Agwjcp Travel distances (X/Y/Z): 350 x 240 x 340 mm Spindle speed, stepless: 20 – 6,300 rpm Spindle taper: SK 40 DIN 69871 Clamping bolt: DIN 69872 Drive power: 6.3 / 10 kW (100/40% duty cycle) Torque: 55 / 80 Nm max. Universal swivel/rotary table: 400 x 290 mm Table load: 100 kg Distance spindle nose/table: min./max. 145 / 485 mm Feed rates: 3,000 mm/min Rapid traverse: 5,000 mm/min Input resolution: 0.01 mm Rotary axis range: 360 degrees Swivel range: degrees Total power consumption: kVA Weight: approx. 1,750 kg Technical data subject to change! Accessories/Equipment: - Direct measuring system for 3 axes - Spindle drive via servomotor with toothed belt - 2 gearbox stages - Fully enclosed guard cabin with sliding door - Swiveling control panel - Coolant nozzles at the vertical head - Coolant system - Chip tray with coolant tank - Electronic handwheel - Machine feet - Machine light - Serial RS232C interface, LAN (RJ45) The machine is perfectly suited for prototyping, toolmaking, training, mechanical workshops, gunsmiths, etc. Its outstanding universal capability is thanks to the additional manually operated rotary/swivel table, which allows 5-sided machining. Condition: Good to very good, from a vocational training center, see photos. Can be inspected under power.

Condition: excellent (used), Year of construction: 1997, Measuring Range Ncodpfx Agjfmp Ttowep X – axis 500 mm Y – axis 600 mm Z – axis 300 mm Accuracy acc. ISO 10360 E = [3,0 + 4,0L/1000] µm at temperature range 18 … 22 °C max. workpiece height 440 mm wax. workpiece weight 250 kg base material granit dimension measuring table 640 x 1280 mm fixing holes M8 x 1,25 Scalesystem Mitutoyo Linear Scales resolution 0,0005 µm DCC Controller Mitutoyo CMMC5 DC motors all axis Guideways air earings Tilt&swivel head Renishaw PH10T Probesystem Renishaw TP200 Probe Changer SCR200 Computer Workstation (Windows 10) Software MCOSMOS-1 V2.4

Condition: used, Year of construction: 2012, Hasegawa PM 150 CNC machining center TECHNICAL DATA Spindle Spindle nose: HSK-E32 Speed: 100 - 30`000 rpm Spindle motor: 3.0 / 4.5 kW Tool changer Capacity: 10 Tool - tool change time: 1.8 sec Travel distances X-axis: 150 mm Y-axis: 225 mm Z-axis: 200 mm 4th axis: Lehmann EA-507, 360° OFFER SCOPE U.A: (non-exhaustive list): Ncedju E El Iopfx Agwsp Hasegawa PM 150 CNC machining center 10-position tool changer Lehmann EA-507 rotary axis transformer Fire extinguishing system Complete operating documentation Exact scope of supply according to photo gallery We assume no liability for the accuracy, completeness and timeliness of the information provided