Measuring Plate

PERTHEN 400x250x70

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 81362, travel distance X-axis: 305 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, controller model: Fanuc 18i-MB, total height: 2,200 mm, total length: 3,300 mm, total width: 2,000 mm, table width: 250 mm, table length: 250 mm, overall weight: 4,600 kg, spindle speed (max.): 15,000 rpm, number of spindles: 1, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, Kitamura Mycenter HX250iF, year 2011 Serial number: 81362 *Main spindle bearings replaced 07/2026 - CNC control unit: Fanuc 18i-MB - Spindle power: 11.2 [kW] - Spindle speed: 15000 [rpm] - Travels in X/Y/Z axes: 305 / 305 / 330 [mm] - Rapid traverse (X/Y/Z): 48 [m/min] - Number of tool positions: 40 Prsdpfxexur E Ss Adwob - Tool holder type: BT30 - Tool change time: 1.2 [s] - Pallet size: 250 x 250 [mm] - Number of pallets: 2 - Maximum weight per pallet: 110 [kg] - Distance center of table/top of spindle: 380 [mm] - Machine dimensions: 3,300 x 2,030 × 2,300 [mm] - Machine weight: 4,600 [kg] Equipment - Manual command - 3-color status light - Coolant tank with high-pressure pump - Oil mist extractor - Chip conveyor - Spindle cooling unit - Renishaw 3D probe - Renishaw tool measurement - Transformer - Approx. 150 tool holders

Condition: used, Year of construction: 1988, Technical details: Predpfx Adsy S T T Uowob x-travel: 800 mm y-travel: 410 mm z-travel: 510 mm control: Fanuc 10 MA rapid travel x/y/z: 20/20/15 mm/min table surface area: 1100 x 450 mm tool taper: BT 40 tool magazin:: 30 BT 40 max. tool length: 250 mm max. tool weight: 8 kg power requirement: 7,5/5,5 kW turning speed range: 6000 1/min weight of the machine ca.: 6,3 t Accerories 2 Chip conveyor, rear side disposal Under offer is a complete CNC tool shop, which will be given up due to old age of owner. The Mori Seiki is still highly accurate. All existing tool holders, tools, drills, vices etc. come with the machine. All measuring devices also come with the machine. Upon request orders for parts to be made can be passed on to new owner. This is a low cost all inclusive opportunity for a "Startup" *

Condition: used, Year of construction: 1999, turning diameter 450 mm turning length 380 mm control FANUC Predpfx Aovanvnsdwsb

Condition: good (used), Year of construction: 2002, functionality: unexamined, 1 used mitre band saw Manufacturer: Kasto Podpfewuqbbox Adwsrb Model: SBL 400 G Year of manufacture: 2002 Technical data: Length: 2491 mm Width: 1240 mm Height: 1369 mm (bow down), 2109 mm (bow up) Minimum cutting length: 6 mm Shortest remnant length: 35 mm Total weight approx.: 920 kg Total drive power approx.: 3.5 kW Mitre adjustment: 0-60° Cutting speed: 32/64 m/min Cutting feed: hydraulically controlled, discharge regulated Material clamping: manual Saw band dimensions: 5090 x 34 x 1.1 mm Saw band guide: carbide, replaceable Saw band tension: mechanical via tensioning cross Saw band cleaning: via easily replaceable wire brush, driven proportionally to the main drive Coolant: supply through a coolant nozzle, tank volume approx. 50 l, pump capacity approx. 16 l/min Cutting ranges in mm approx.: Mitre angle 0° (90°) / 45° / 60° Round: 400 / 320 / 240 Square: 320 x 320 / 320 x 320 / 220 x 220 Flat (W x H): 400 x 320 / 210 x 320

Year of construction: 1990, condition: ready for operation (used), Travel X/Y/Z: 400mm/300mm/495mm, spindle center table distance: 25mm-325mm, spindle nose table distance: 125mm-620mm, rapid traverse: 24m/min, feed rate: 5m/min, spindle type: ball screw, spindle diameter: 36mm, speed: 6000rpm, spindle power: 5.5kW, spindle mount: BT40. Tool slots: 30, tool change time: 2.5s, clamping time: 7s, max. tool diameter/length: 110mm/250mm, max. tool weight: 8kg. Table dimensions X/Y: 315mm/315mm, table angle: 7.5°, table clamping force: 3400kg, max. workpiece weight: 150kg. Dimensions X/Y: approx. 1900mm/2300mm, weight: approx. 4500kg, control: Fanuc 0-M, operating hours: 732h, piece counter: 172776. Including cooling lubricant system and tool magazine with 30 places. Documentation available. On-site inspection is possible. Predpfx Aet Nhmzedwsb

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: FANUC, controller model: Doosan-FANUC 21i-MB, table width: 430 mm, table length: 920 mm, spindle speed (max.): 20,000 rpm, spindle motor power: 15,000 W, number of spindles: 2, number of slots in tool magazine: 30, tool diameter: 40 mm, number of axes: 4, Equipment: documentation/manual, Tool Standard is CAT-40, 30 pieces of Tool-holders are attached to this machine 4th axis: rotary table included; Renishaw probe ready. through spindle coolant; spindle chiller; rigid tapping; rapid traverse 36,000 mm/min; manual pulse generator; air blast; coolant tank & pump; chip tray; Psdjx Ncpgjpfx Adwsrb

Condition: good (used), Year of construction: 1990, CNC Machining Center Manufacturer: MORI SEIKI Type: Partner M300 A-1 Year of manufacture: 1990 Control: FANUC O-M Travel distances: X/Y/Z: 400 x 300 x 495 mm Distance between spindle center and pallet table (Y-axis): 25 – 325 mm Distance between spindle nose and pallet table (Z-axis): 125 – 620 mm Rapid traverse: 24 m/min Feed rate up to 5 m/min Spindle: Ball screw: 36 mm diameter Feed drives FANUC AC X/Y-axis Model 5 Z-axis Model 10 Main spindle speed: 100 – 6000 rpm Main spindle motor: AC 5.5 kW Main spindle taper: BT 40 Pallet: Pallet size: 315 x 315 mm Pallet indexing angle: 7.5 degrees Indexing accuracy: + / - 2 sec Repeatability: + / - 1 sec Predst Rg E Sjpfx Adweb Pallet clamping force: 3,400 kg Workpiece weight max.: 150 kg Automatic tool changer: Number of tools: 30 Tool change time: 2.5 sec Collet clamping time: 7 sec Tool diameter max.: 110 mm Tool length max.: 250 mm Tool weight max.: 8 kg Special accessories: Workpiece end indicator with alarm light Magazine for 30 tools Operating hours display Tool life monitoring Coolant system Work area lighting Weight: approx. 4,500 kg Space requirement: 1,900 x 2,300 mm 28926

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, controller manufacturer: FANUC, table load: 300 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 11,000 W, number of slots in tool magazine: 20, number of axes: 3, This 3-axis YCM XV 560A was manufactured in 2011. It features a table size of 700 x 420 mm and impressive X, Y, and Z travels of 560 mm, 410 mm, and 450 mm, respectively. The machine is equipped with an 11 kW spindle power and a spindle speed of 10,000 RPM. If you are looking to get high-quality machining capabilities, consider the YCM XV 560A vertical machining centre we have for sale. Contact us for further details. Podpfxsy Duxvs Adworb • Table size: 700 x 420 mm • Condition: Very good; low hours; used in 1-shift production Technical Specification Through-spindle Coolant No

Condition: excellent (used), Two digital calipers Digital caliper Mitutoyo 551-231-10, measuring range 300mm Prsdsw Tctrepfx Adweb Digital caliper Mitutoyo 500-181-U, measuring range 150mm The batteries have been replaced or are in good condition. The measuring tools can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this supplier".

Condition: like new (used), Year of construction: 2008, operating hours: 4,322 h, functionality: fully functional, FANUC ROBODRILL α-T21iF | 4,322 hours | 24,000 rpm | BT30 FANUC ROBODRILL α-T21iF – High-Speed CNC Machining Center A very well-maintained FANUC ROBODRILL with very low operating hours – approximately 4,322 run hours. The machine was manufactured in Japan in December 2008 and is equipped with a FANUC Series 31i-Model A5 CNC control, a high-speed 24,000 rpm spindle, and fast axis movements of up to 54 m/min. The machine is in very good technical and visual condition and can be inspected and demonstrated under power by prior arrangement. Approximately 50 pcs. of BT30 tool holders of various types and sizes are included in the price. Technical specifications Manufacturer: FANUC Model: ROBODRILL α-T21iF Type: A04B-0099-B112#BM Year of manufacture: 12/2008 Country of origin: Japan CNC control: FANUC Series 31i-Model A5 Run time: approximately 4,322 hours X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 330 mm Rapid traverse X/Y/Z: up to 54 m/min Maximum spindle speed: 24,000 rpm Spindle taper: BT30 Pjdsz Diqbopfx Adwjrb Automatic tool changer: 21 positions Maximum table load: 300 kg Machine weight: approximately 2,100 kg Power requirement: 10 kVA Power supply: 3-phase, 200/220 V, 50/60 Hz CE marked: Yes Included in the price Approximately 50 pcs. of BT30 tool holders / clamping holders of various types and sizes. IMPORTANT The rotary table / 4th axis shown installed in the machine in the photographs is NOT included in the sale. The machine is available for inspection and demonstration under power by prior appointment.