Section Steel Shear

PEDDINGHAUS Peddimaster 60/80

Condition: used, Year of construction: 1990, Max. punching capacity: 600 kN Max. shear force: 800 kN Punches 27 mm holes in 16 mm steel Shears on the flat steel shear to 400 mm up to material thickness of 16 mm steel Hydraulic hold-down device on flat steel shears Fpedpfotmyifjx Afnoc Large support table on punching side with stops Further technical data on request With a range of punches and dies as desired Weight: approx. 2,000 kg

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 4,000 mm, overall weight: 820 kg, load capacity: 500 kg, The offer concerns the following set: (possibility to adjust device parameters or to purchase the vacuum lifter or jib crane separately) - Vacuum lifter for boards, suitable for handling MDF, laminated boards, raw boards, particle boards, etc. (model WOOD SYSTEM DS 250) - Stationary jib crane - Electric chain hoist - Manual trolley Features of the WOOD SYSTEM DS 250 vacuum lifter: - Designed for handling boards - Actuator for rotation between vertical and horizontal positions - 6 suction cups Ø 200 mm - Frame allows for adjustment of suction cup positioning to match the material being handled - Beam length: 2500 mm - Each suction cup is equipped with a ball valve for individual deactivation - Integrated air pulse function to prevent material adhesion - Individual X and Y axis adjustment for each suction cup - Control from the operating console (control panel): - Power on/off for the generator - Vacuum engagement/release - Thumb-operated control of the electric hoist – raising/lowering the lifter - Pressure gauge - Pneumatic supply – equipped with vacuum generators - Lifting capacity: 400 kg - Device weight: 100 kg - CE certificate Stationary jib crane Technical data: • Column height: 4 m • Height under the jib: 3 m • Jib length: 4 m • Lifting capacity: 400 kg • Slewing range: 270 degrees • Lifting speed: approx. 3 m/min • Colour: any RAL palette colour on request • Manual slewing • Manual trolley • Quadruple/double needle bearing on the jib arm for smooth rotation • Electric chain hoist • CE certificate INCLUDED IN THE PRICE: • Pillar jib crane • Electric hoist – single phase • Manual trolley • CE certification Fpodpfsxln Drox Afnec • Complete documentation Standard warranty: 12 months

Year of construction: 1990, condition: used, Max. punching capacity: 600 kN Max. shearing capacity: 800 kN Punches 27mm holes in 16mm steel Shears on the flat steel shears to 400 mm up to a material thickness of 16 mm steel Fsdpfxom T Amuj Afnjpc Hydraulic hold-down device on flat steel shears Further technical data on request With a range of punches and dies as desired Weight: approx. 2,000 kg

Year of construction: 1997, condition: used, Technical details: Rated capacity: 1100 kVA Revolution per minute: 1500 U/min type of fuel: Wasserstoff / Steam / Vapor max. temperature: 420 Grad weight: 3,9 t STEAM TURBINE other data: - Power: normal 560 kW and max. 820 kW - P1 64 bar - P2 11,5 bar - 1N = 1500 Ampere - Generator type DSG74-M1-4W; 400 V; - Generator nominal power: 1053 kVA / nominal effective power 820 kW - Turbine is suitable for operation with exhaust steam temperature of approx. 405 °C. - A throughput of 2.8t live steam / h in continuous operation is only possible in load-free condition. Sale of the turbine as described and as is! The performance data given are manufacturer's data. These may vary due to age-related wear! We do not have and do not sell spare parts. For spare parts please contact the manufacturer: Dresser-Rand Siemens !!! Fpsdpfx Aeu Nvbuofnec i.D. *

Condition: reconditioned (used), Year of construction: 2005, Allgaier Screening Machine | Gyratory Screen Type type ARSM 33-10 completely reconditioned - Make: Allgaier - Type: ARSM 33-10 - Year of construction: 2005 - Condition: completely reconditioned - Screening capacity: up to approx. 200 - 220 srm/h (for wood chips and sawdust) - Screen area: 10.0 m² x 2 = 20 m² per screen mesh size - Fractions: 3 - Screen decks: 4 pieces + 1 piece intermediate floor - Drive power: 7.5 kW - L x W x H: 7,000 x 3,540 x 2,700 mm - Machine weight: approx. 8,000 kg Fpjdpoq Iivaefx Afnoc - Machine colour: RAL 6011 Reseda green - Screen inserts free selectable - Design of outlets according to customer requirements Screening machine completely refubished (overhauled). Spherical roller bearings and spring struts are new. Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - wood pellets - charcoal - Waste wood - bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Oscillation screen | Wood chip screener | Screening machine for wood chips

Condition: ready for operation (used), Year of construction: 2018, operating hours: 60,000 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, power: 3,028 kW (4,116.93 HP), empty load weight: 10,000 kg, fuel: domestic gas H, control cabinet height: 2,000 mm, control cabinet length: 600 mm, control cabinet width: 800 mm, nominal power: 2,679 kW (3,642.42 HP), rotational speed (min.): 1,500 rpm, type of cooling: water, GE Jenbacher JMS 616 GS-N.L Gas CHP Unit Fuel Type: Natural Gas Electrical Output: 3,065 kW Thermal Output: 2,420 kW Total Efficiency: 85.6% Electrical Efficiency: 42.9% Thermal Efficiency: 42.7% Voltage: 690 V Frequency: 50 Hz RPM: 1,500 Fpodpfjwptfrox Afnsc Engine Configuration: V16 (60° angle) Bore x Stroke: 190 mm × 220 mm Displacement: 99.8 L Fuel Consumption: Approx. 597 Nm³/h (at LHV 9.5 kWh/Nm³) Noise Level: 101 dB(A) at 1 metre Dry Engine Weight: approx. 10,000 kg Dimensions (L×W×H): 8,300 × 2,200 × 2,800 mm ⚙️ Included Equipment Turbocharged engine with intercooler STAMFORD LVSI 804 W alternator (rated 3,555 kVA) LEANOX control system Electronic ignition system Full lubrication system (pump +filters) Heat exchangers for coolant and oil Control panel with visual interface Pre-heating system Gas train according to DIN-DVGW standards

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, 🚨 FOR SALE: 2x Kardex XP500 Machines – Top Condition! 🚨 For sale for removal. We are building a new warehouse and do not require these units. In good condition, recently serviced, well maintained throughout the time we have owned them. Price is per unit, negotiable. Shelves can be easily reconfigured to accommodate different product types / sizes. Bins can be sold with machines if desired. Machines are currently configured for dual tray presentation. Also includes 10-bay Kardex SortBench. Details: Model: Kardex XP500 Quantity Available: 2 units Condition: Well-maintained and fully operational Key Features: High-density storage to maximize space utilization Fast and reliable picking system for enhanced productivity Built for heavy-duty industrial applications Ergonomic design to improve workplace safety Energy-efficient operation Why Kardex XP500? These machines are perfect for businesses looking to improve efficiency, save floor space, and boost order-picking accuracy. Fpodpfevuvbzex Afnec Location: The units are currently stored in Wanganui, New Zealand.

Condition: used, functionality: fully functional, 2-shaft compulsory mixer Working dimensions approx. 900 x 3,500 mm Electric drive with 132 kW motor and gearbox on a semi-mobile steel structure with new control panel Fjdstrmvfjpfx Afnepc

Condition: not inspected (used), Year of construction: 2008, Parker Hannifin Instron Hydraulic power unit Year of construction 2008 Power 90KW Main fuse 200A Working pressure 285bar flow rate 165L/min Tank 850 litres The offer is aimed exclusively at traders within the meaning of § 14 BGB Fpjdpeq Nyw Asfx Afnjc No sale to private individuals!

Condition: new, Year of construction: 2026, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials Two-pole drive motor enables saw band speeds of 30 and 65 m/min Monitoring of saw blade tension electromechanically via microswitch When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required Saw arm inclined by 25°, thus longer service life of the saw band Precise and robust band guides with adjustable HM plates After completion of the cutting process the saw band stops automatically in the lower end position Lowering of the saw arm by gravity or manually With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights length approx. 1200 mm width/depth approx. 650 mm height approx. 1800 mm Weight approx. 270 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 30 / 65 m/min Speed levels 2 Saw band length 2450 mm Saw band width 27 mm Fjdpog U Uv Rjfx Afnepc Saw band thickness 0,9 mm Material feed Table height material feed 925 mm Cutting range 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular lying (hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular lying (hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular lying (hollow profile) 90 x 90 mm Art. No.: 3680001 S