Beverage machine crate palletizing

Pack-Tec ServoPalRB

Year of construction: 1990, condition: good (used), Krones Filler Beer Glass Bottles, 24 valves, 6 head capper crown corker, Year: 1990, with Siemens S7, Pre-evacuation, Vacuum Pump, for 33cl Logneck, 33cl Steini, 75cl, 250 ml + 330 ml + 750 ml Podpst Akftjfx Aa Eerf

Condition: used, Year of construction: 2010, Overview   This ARCADE GEL 6 bottle washer was built in 2010 by the German manufacturer GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and must be replaced due to an increase in performance.   Technical details   Nominal output: 33,000 bph   Control range: 13,200 - 36,300 bph   Chain pitch: 169 mm   Cell pitch: 110 mm   Bottle cells per row: 30 pieces   Total bottle cells: 7,860 pieces   Bottle cells, loaded: 7,680 pieces   Consumption  Compressed air: 1m³   Steam (operation): 489 kg/ h   Steam (heating): 4,430 kg/ h   Electrical power: 48.4 kW   Water: 7.35 m³/ h   Bath volume   Pre-soak: 2,263 l   Pre-caustic: 7,240 l   Caustic 1: 31,755 l   Caustic 2: 350 l   Hot water 1: 350 l  Hot water 2: 350 l   Cold water: 350 l  Podpjt Ul Exjfx Aa Eorf

Condition: used, Bottle filling line with an output of 30,000 bottles/h. 0.33l Vichy, 0.33l Euro, 0.35l Frucade and 0.5l NRW single-use and reusable bottles are used. The system consists of the following machines/components: -Unpalletizing system Manufacturer: Radenska & Steinle -Unpacker Manufacturer: SZA Federspiel -New glass lifter Manufacturer: Steinle Fördertechnik -Uncorker Manufacturer: Rink -Bottle washing machine Manufacturer: Krones -Crate washer -Bottle inspector Manufacturer: Krones -Beer preheater Manufacturer: Fischer -Bottle filler Manufacturer: Krones -Crown cap filling bunker with magnetic transport Manufacturer: Gassner -Bottle level control Manufacturer: Metec -Labeler Manufacturer: Krones/Renner -Label control Manufacturer: Miho -Packer Manufacturer: SZA Federspiel -Full crate inspection Manufacturer: Metec -Bottle carrier unfolder -Palletizing and palletizing system Manufacturer: Radenska & Steinle Additional title: with palletising and depalletising, years of manufacture 1993 - 2009 Capacity: 30000 bottles/h Formats: 0,33 L Vichy, 0,33 L Euro, 0,35 L Frucade und 0,5 L NRW Running direction: anticlockwise Operation / Control: mainly Siemens S7 Features: Unpacking and palletizing system; unpacker; new glass remover; corker; bottle washing machine; crate washer; bottle inspector; beer preheater; bottle filler; crown cap feeder; fill level control; labeler; label control; packer full crate inspection; bottle carrier erector Psdpfx Aevu Tt Ioa Ejrf Layer patterns: 4x20, or 4x24, bottles, 4x8 boxes, 5 layers, on Euro pallet

Condition: used, Year of construction: 2024, Overview The bottle washer was previously used in a brewery. Due to the low number of operating hours, the machine is in very good condition, like new. It was replaced, as the previous owner wanted to run bottle formats, which did not fit this machine. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported. The machine comes with 12months warrantee. Tech Specs: Capacity: 9,500 bph Cell Pitch: 95 mm Bottles per row: 25 Dimensions + Weights: Housing: 7,162 x 2,740 x 2,500 mm / 18,806 kg Ready for operation with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg YOM 2024 Formats: 0,25l 0,33l 0,5l 0,75l The Machine in Detail / Equipment Features: Heated by steam Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing CE certified Chemical Dosing Pumps Machine data sheet included High pressure pre rinsing Rotating Spray nozzles Single End Machine Label discharge rear right Finger discharge + finger feed Bottle cells made of plastic Concentration measurement NaOH supply liquid Sectional view arrangement of baths Spindles SST 24 volt control voltage Control Siemens S7 Regularly maintained Full machine body in SST Vapor Discharge Machine dismantled, ready to ship Automated machine Startup Prodsvrfivopfx Aa Ejf

Condition: used, Year of construction: 2007, Overview The filler was built in 2007 by the German company Krones. The machine has been regularly serviced, is still assembled and can be inspected at any time. Technical details Output: 40,000 bph (200 ml) Formats: 200 ml glass bottle 237 ml glass bottle Closure: crown cap Running direction: counterclockwise Inlet/outlet height: 1,150 mm +- 50 mm Filling points: 96 Capping points: 15 Pitch circle diameter: 2,880 mm Pitch: 94 mm Control system: Siemens S7 Energy consumption: 15.17 kW Prjdpfx Aaeqqz Txo Eef

Condition: used, Year of construction: 2007, Overview The bottle washer was previously used in a brewery in Germany. Due to the good and continous maintenance the machine is in very good condition. All basins and the machine body are made of stainless steel. The machine is still installed and in production. As the line speed needs to be increased, this machine is replaced, even though it is in great shape. Tech Specs: Rated Capacity: 13,000 bph (based on 1.0L mineral water bottles, format: 89 x 310 mm, weight: 600g) Total number bottle cells: 3,240 pcs Cells per basket row: 18 pcs Cell pitch: 110 mm Chain pitch: 169 mm Treatment Times total processing time: 14.95 minutes total immersion time: 7.56 minutes caustic immersion time: 6.73 minutes caustic filling time: 7.73 minutes caustic contact time: 7.89 minutes total internal spraying time: 70 seconds total external spraying time: 25 seconds Dimensions Housing (L x W x H): 8,530 x 2,300 x 2,990 mm Total dimensions (L x W x H): 8,880 x 4,200 x 3,330 mm CE certified Chemical Dosing Pumps Machine data sheet included Rotating Spray nozzles Single End Machine Label discharge rear left Label press included Finger discharge + finger infeed Bottle cells made of plastic Full machine body in SST Vapor discharge Pjdpfx Aajxbr Slj Esrf

Condition: used, operating hours: 1,000 h, Used Doypack Filling Line kg/h Filling Line Technical Configuration The used Doypack filling line, rated at 600 kg/h, comprises a series of 2015 machines that offer precision, hygiene, and reliability in filling flexible pouches. The process begins with product preparation and feeding, ensuring uniform consistency and stability before filling. Next, a FL Tecnics machine, model FL 2.2, handles pouch feeding, weight filling, sealing, and packaging. Specifically, a VARPE control system measures the weight of the product in each pouch with high precision, minimizing variations and waste. Simultaneously, another VARPE unit performs an X-ray inspection, which detects any contaminants or structural issues. Consequently, this adds a crucial level of safety and quality control. Meanwhile, a spiral airflow pasteurizer manufactured by SARP performs the pasteurization phase. Unlike other systems, this design treats the product uniformly, preserving its organoleptic characteristics. Finally, a cartoner completes the packaging process, efficiently organizing and preparing the filled pouches for shipping. Taken together, these components comprise the 600 kg/h Doypack/Tetra Pak filling line used to ensure a safe, uniform, and high-performance packaging process. Production Performance and Operating Conditions The 600 kg/h Doypack/Tetra Pak filling line used processes up to 600 kilograms of product per hour. Thanks to its design, it maintains consistent dosing and minimizes downtime. Its weight-based filling system ensures precise volumes in each pouch, thus reducing overfilling and meeting production specifications. Notably, the line has only been in operation for approximately 1,000 hours, during which it has produced approximately 5 million pouches. Therefore, the system remains in near-new condition. Therefore, plants can count on long-term reliability with minimal wear. In terms of maintenance, this translates into reduced operating costs and longer uptime. Versatility in Product Types and Formats The Doypack/Tetra Pak filling line used operates with pouch sizes from 90 grams to 150 grams, using weight-based precision filling. Predjvguc Ujpfx Aa Eef Thanks to this, operators can process a wide range of products, including infant formula, ready-to-drink beverages, dairy products, sauces, and creams. More importantly, technicians can easily adjust dosing parameters to accommodate varying product viscosities or packaging standards. As a result, this system offers high flexibility to companies operating multiple product lines. Furthermore, weight-based filling improves yield accuracy, helping manufacturers meet labeling and legal compliance requirements. Operational Safety and Technical Documentation Each machine on the Doypack/Tetra Pak filling line includes integrated safety devices compliant with European standards. These include mechanical guards, interlocks, and alarms that proactively protect personnel.

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: K123-636, Equipment: type plate available, Used bottle filler, KRONES 066-103/KK11-M from 1997 for sale • Output: 22,000 bph (0.5 L bottles) and 24,000 bph (0.33 L bottles) Specifications: Used Krones returnable glass bottle filler for beer and soft drinks Model: 066-103 • Year of manufacture: 1997, commissioned in 1997 • 66 filling valves / 11 capper heads, short filling tubes • Clockwise rotation (L-R), diameter 2,880 mm • Double evacuation, splinter washer • Crown cork handling • Capacity for 500 ml bottles: 22,000 bph • Currently configured for 500 ml and 330 ml bottles, with format parts available for changeover Previously part of a multiblock with labeller station, which is no longer included. Filler control system: Siemens S5 (updated 2009) Products filled: beer, alcohol-free beer, long drinks, cocktails, cider, soft drinks, carbonated water, still water Pjdpfx Asxp I Apja Ejrf Maintenance: Labeller deblocked in 2009 Regularly maintained by KRONES throughout its life—especially filler valves and components In production until 01/2026

Condition: used, Year of construction: 2016, Overview This packaging line for repacking glass bottles into carriers, trays, cartons and dollies was produced between 2002 and 2016 by several European manufacturers such as Yaskawa, Profipack, DokuConsult KG and Krones. The line is currently still in operation until June 2025 and was specially designed for repacking 0.33L and 0.5L glass bottles into 6-bottle carriers (open baskets), returnable trays and various pallet types (Euro dolly, Euro pallet). It enables both the unloading and loading of full and empty containers into new packaging units. The system will be available from June 2025, as soon as it is decommissioned. Technical details  Output: up to 9,000 bottles per hour Formats processed: 0.5L NRW returnable bottles (brown) 0.33L non-returnable bottles (green and brown) 6 open basket carriers (2x3) for 0.5L and 0.33L Euro dolly: 400 x 600 x 1,600 mm Euro pallet: 1,200 x 800 x 144 mm Basic crate 20x 0.33L: 300 x 400 x 290 mm Modular crate 20x 0.5L: 300 x 400 x 290 mm Logipack AllCare tray: 400 x 600 x 85 mm "Rollfix" adapter pallet: 1,200 x 800 x 126 mm Full carton with flash bottom (single or double-wall) for 4x 6-pack carriers Repacking configurations: From modular box 20x 0.5L → 6-pack carrier in tray on Euro dolly From modular crate 20x 0.5L → 6-carrier in tray on Euro pallet From basic crate 20x 0.33L → 6-carrier in carton Returnable crate 24 x 0.33 → 6-carrier in pinol crate 4 x 6-carrier Empties 0.5L in tray (Euro dolly or pallet) → Modular crate 20x 0.5L Scope of delivery  Unloading robot cell: Yaskawa / Profipack, MOTOMAN MH 180 II (2016) incl. head & crate handling Loading robot cell: Yaskawa / Profipack, MOTOMAN MH 180 II (2016) Bottle carrier erector: DokuConsult KG, FTA-6/4-Z1-G5 (2016) Double turning station: Profipack (2016) Pallet magazine: Krones, type 454 model LPMH (2002) Deck tray feeder Vertical strapping machine for dollies | Strapex Horizontal strapping machine for dollies | Strapex Pallet merging Spare parts can be purchased in addition to the purchase price Psdpfxswqhpbe Aa Eorf

Condition: used, The crates reach the palletiser via a two-lane crate conveyor belt running transversely. A sliding device pushes a row of four crates at a time to the palletiser gripper head's pick-up table. After repeating this process, the crates are arranged in a 2x4 pattern below the gripper head. The crates are then placed in a single layer on the pallet below. Additional title: palletising of beverage crates Psdpfx Aaew U D E So Ejrf Capacity: 3000 crates/h Formats: Beer crates; Euro pallets; NRW, swing-top, longneck and Steiniflaschen bottles Features: Pushing device, box table, palletising robot, Control panel with user interface and touchscreen monitor Layer patterns: 8 crates in a 2x4 arrangement per layer; 5 layers per pallet or 7 layers per pallet (for stone bottles)