Guillotine Shear 4x2000
Otinus SMO-2004-N

Name: Otinus SMO-2004-N
Brand: Otinus
Price: 18200 EUR
Availability: InStock

Fixed price plus VAT

€18,200

Year of construction

2024

Condition

New

Location

Bydgoszcz

Guillotine Shear 4x2000 Otinus SMO-2004-N

Show map

Machine data

Machine type:: Guillotine Shear 4x2000

Manufacturer:: Otinus

Model:: SMO-2004-N

Year of construction:: 2024

Condition:: new

Price & Location

Fixed price plus VAT

€18,200

Location:: Karola Szajnochy 14, 85-738 Bydgoszcz, Poland

Call

Details about the offer

Listing ID:: A7509146

Update:: 25.07.2025

Description

Hydraulic Guillotine Shear QC12Y 4x2000 SMO-2004-N

Specifications
- Maximum thickness mild steel (PN-EN S235): up to 4.0 mm
- Maximum working length: 2000 mm
- Cutting angle: 0.5 - 1.5°
- Strokes/minute: 6 - 20
- Backgauge retract distance: 600 mm
- Motor power: 4.0 kW
- Length: 2700 mm
- Width: 1500 mm
- Height: 1650 mm
- Total mass: 2500.0 kg

Equipment
- Backgauge powered by an electric motor (on ball screws)
- Hydraulic sheet metal clamping over the entire working length
- Blade clearance adjustment
- Ball transfer units built in on the table
- Workspace illumination
- Front Suports
- Mobile foot switch

Rear ramp
The rear ramp has been fitted with ball transfer units so that cut-offs are never left over on the machine.

E21S Controller
(Mounted on a swivel arm on the left side of the machine)
- Backgauge control
- 40 programs can be stored - up to 25 different steps in each program
- Retract function
- One-touch parameter saving
- Parameters memory in case of power failure

Steel hydraulic lines
Hydraulic lines made of steel instead of rubber reduce the chances of future leaks.

OCS - Oil Cooling System
Oil Cooling System - guarantees the stability of the machine's operating parameters even after long, continuous operation.

PCS - Preassure Control System
Pressure Control System ensures reliable operation of the blade for many years.

Assistance by a specialist
We make sure to stay in constant touch with our Clients. Therefore, we add a package of tech support hours of Otinus Professional Assistance to every machine purchased.

Technical consulting
We have specialists who will determine the right machine and accessories before the purchase - on the basis of technical drawings of the parts you plan to make.

See and test the machine
Join us for a special demonstration where a qualified Otinus technician will show you the full functionality of the machine.
In addition, you will be able to try out how the device will perform against your needs. You can provide technical drawings and sample material.

Included in the machine price
Pgjdpoiggf Isfx Ag Dew
Jednodniowe szkolenie wraz z instalacją maszyny
- 1 day (up to 8 hours) - installation of the machine and learning to use the controller.
Telephone consultation with a specialist
- 7.30 am - 9.00 pm (Mon-Sat) – a time package of 8 tech support hours to be used within 12 months.
Free loan of transport rollers and two lifting jacks for easier positioning of the machine at the Client's site. The rollers and jack will be delivered upon prior (no less than 7 days before delivery of the machine) request.

Terms of cooperation
- 24 month warranty.
- Lead time: approx: 10 - 12 weeks. Not applicable if a machine is labeled as available immediately.
- The machine is brand new.
- Warranty and post-warranty service provided by the seller.
- The Client is responsible for the machine during unloading and transport on their premises.

Seller

Registered since: 2021

95 listings online

Call

Send inquiry

Telephone & Fax

+48 52 30... show

These listings may also fit your interest.

Listing

Aluminum Shredder – Specialized Machine Two-shaft shredder for aluminum RS-8A

Rybnik

1,877 km

Aluminum Shredder – Specialized Machine
Two-shaft shredder for aluminumRS-8A

Call

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 2,900 kg, total height: 25,000 mm, total length: 2,710 mm, total width: 1,040 mm, input voltage: 400 V, We offer a high-performance, low-speed two-shaft shredder designed for effective and precise shredding of aluminum materials, including: 🔹 rods 🔹 strands 🔹 wires 🔹 flat bars Pgsdpfx Agetvdcys Dow 🔹 cables The specially engineered shredding system prevents material from being dragged or crushed — aluminum is efficiently cut, not compressed. The knife design ensures clean and accurate cutting and eliminates the risk of vertically fed material passing through the chamber unshredded. The knives are made of certified, wear-resistant steel. The shredder is equipped with gear motors from a reputable manufacturer. Available motor configurations: 2 × 18.5 kW or 2 × 22 kW. Fraction size – to be agreed upon with the customer. Model RS8: working shaft length of 600 mm – identical construction to RS800 and RS1200 models. Manufactured in Poland.

See details

Listing

Limburg an der Lahn

1,167 km

Meat grinder
K+G WetterWW130

Call

Condition: refurbished (used), K+G Weather WW130 The machine was completely overhauled by us. The machine is on site and can be inspected and tried out. Pjdpfxei Hlude Ag Dogw Errors and prior sale reserved. All information is non-binding. The accuracy of the information contained and prices are not guaranteed. A warranty and / or liability is excluded. Until full payment, the machine remains our property.

See details

Listing

Compensating stacker Gaemmerler KL 540 LPC mit angebautem Verblocker VM 500

Germany

1,293 km

Compensating stacker
GaemmerlerKL 540 LPC mit angebautem Verblocker VM 500

Call

Year of construction: 2006, condition: used, Gaemmeler KL 540 Compensating Stacker with attached blocking device VM 500 The compensating stacker KL 540 is equipped with the proven Gaemmerler LiftPack technology. The KL 540 is suitable for bundle heights up to 300 mm. Nummerous options allow to meet the individual customer requirements. Condition: cleaned and ready for production Technical Data: Cycle time ≥ 1,5 sec. (depending on the copy) ≥ 1,2 sec. with Servo pusher (depending on the copy ) Pedpfx Agsh Nrh Uj Degw Pagination 4 – 96 Heatset / Gravure Formats A 105 – 330 mm (with rear-eject 105 – 310 mm) B 140 – 500 mm D max. 560 mm Layer height max. 200 mm Bundle height max. 300 mm Weight: 1.500 kg approx. Gaemmerler VM500 blocking unit Cycle time: (approx. 6.7 sec) per pack with a pack height of 300 mm and a blocking time of 2 sec. The cycle time per pack increases when the blocking time is increased and the pack height is reduced. The cycle time is also strongly influenced by the output speed of the compensating stacker and thus by the product (surface, format). Sizes: Width: 140 to 500 mm - 5.5" to 19.7" Length: 105 to 330 mm - 4.13" to 13" Pile height: 55 to 400mm - 2.16 to 15.7" Inlet height: 890 mm - 35" Outlet height: 890 mm - 35" Connected load: 16A (2KW, 380/480 Volt, 3 phases, neutral) Air requirement: 1000 standard l/min, 6 bar; unoiled, dry air Weight: approx. 500 kg

See details

Listing

Barcin

1,740 km

Powder grinder machine
PGM40B

€15,400

ONO plus VAT

Call

Year of construction: 2023, condition: new, Mill for fine grinding of flour, coffee, dried vegetables, spices and more.. grinding range from 20-120mesh. capacity 100-400kg per hour. engine speed 3400 per min. machine weight 600kg. The power needed to operate the machine is 11kW. The machine has an additional dust filtration extraction. The whole machine is made of SUS304 stainless steel. PayPal payment available!!! Psdpfx Agok S Rpue Djgw

See details

Listing

Budapest

2,045 km

Heavy duty shelf
ROSSIT

Call

Condition: used, Crossbeams: 2700x120x50 mm – 63 pieces 2700x120x50 mm – 1 piece 1800x100 mm (ideal for chipboard): 1 piece Frames: 5200x1000x95 mm – 17 pieces 4600x1000x90 mm – 4 pieces 2300x1000x95 mm – 2 pieces If you require racks or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used racking systems as well as accessories and are happy to support you with your planning. Additional accessories such as: Pgodpjh Izr Ujfx Ag Dew Frame, corner and collision protection, push-through protections, chipboards, wire meshes, rear wall grids, and depth supports are available. Shipping: Please inquire about shipping costs, specifying your postal code, location, and the quantity of items required. Additional services: Planning, rack assembly/disassembly, purchase/sale Changes and errors in technical data, specifications and prices as well as prior sale reserved!

See details

Listing

Baler Press ATM Recyclingsystems GmbH Paketierpresse SP 100 AK-2

Fohnsdorf

1,761 km

Baler Press
ATM Recyclingsystems GmbHPaketierpresse SP 100 AK-2

Call

Condition: used, Year of construction: 1988, operating hours: 1 h, machine/vehicle number: V 516, total width: 2,000 mm, total length: 7,000 mm, total height: 1,800 mm, pressing force: 90 t, sheet thickness aluminum (max.): 5 mm, year of last overhaul: 2025, operating pressure: 300 bar, power: 11 kW (14.96 HP), empty load weight: 16,000 kg, cutting force: 90 t, Bale size 400x400 mm Force 1 Step 900 KN Force 2 Step 900 KN Steel max. 2500-3500 Kg/Std. Pgodslhqd Rjpfx Ag Dew Aluminium max. 2000 - 3000 Kg/Std. Driving Power 11 KW Arrangement Surface 7x2x2,5 m x m Machine weight 16 to Place: Austria Aviable: 30.01.2025

See details

Listing

Saint-Étienne

1,270 km

EDDY CURRENT
IMRORCSX C-100

€18,500

ONO plus VAT

Call

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, For optimum recovery of non-ferrous metals or purification of materials Pgodpsvdqdisfx Ag Dow This extremely powerful machine is mainly used for processing household waste, shredder materials, household appliances, wood, plastic, glass, IBA and bed ash and electronic scrap. This IMRO non-ferrous metal separator stands up to the demands of very high recovery quotas and high purity levels.

See details

Listing

Machining center DMG Deckel Maho DMU 100T

Kaniów

1,911 km

Machining center
DMG Deckel MahoDMU 100T

€34,900

ONO plus VAT

Call

Year of construction: 2000, condition: excellent (used), I have for sale a Deckel Maho DMU 100T machining center Control: Heidenhain MillPlus Technical condition of the machine - Very good Year of production: 2000 Country of Manufacture: Germany Machine parameters: Axis travel "X" :1080mm "Y" axis travel: 710mm "Z" axis travel 710mm Torsion head Pgodpfx Agolffzcs Dsw Maximum spindle speed 12,000 rpm. Tool storage: 32pcs(2x16 tools) High-pressure cooling Spindle cooling Heidenhain measuring scales on all axes Chip conveyor central lubrication hydraulic tool clamping Spindle taper SK40 Full programming manual Documentation Machine weight 10t. Included in the price loading Stal-Com company for 17 years we are engaged in sales, service and training on CNC machines from DMG group. We specialize in all models of Gildemeister lathes and Deckel Maho Machining Centers. All machines undergo a meticulous technical inspection. In addition to customers from Poland, our machines are also purchased by customers from all over Europe and parts of Asia. Each machine can be checked during production as we also do machining. After purchasing a machine from our company, we provide training for the crew as well as we can set up the production of details at the customer's site. We cooperate with many companies on a permanent basis to which we provide further machine tools. Stal-Com Rafał Dziendziel

See details

Listing

Berlin

1,446 km

Metal Chip Press
EBERHARDT

Call

Listing

Electric polymerization furnace Romer Poland SL - 2020

Skarżysko-Kamienna

1,987 km

Electric polymerization furnace
Romer PolandSL - 2020

Call

Year of construction: 2020, condition: new, 7" Touchpad Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters. Memory 20 programs each with 10 events You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process. Series SL Power Electricity Forced air circulation Two-channel USB temperature recorder Number of temperature sensors MTS 2+ Wall insulation thickness (mm) 240 Ceiling insulation thickness (mm) 300 Number of programs 20 Max. Number of steps in the program 10 Average heating time up to 180 ° C 40min 35min 25min 25min 20min Number of door leaves 2 Pgjdsfy T H Iepfx Ag Dsw Diagnostics / update via the internet Media consumption meter Stainless steel ceiling elements Direct heating Explosionproof closures Silicone door seal Information about consumption of power Consumption is calculated based on the settings of the burner. This feature will allow you to estimate the cost of the cycle, consumption and plan check staff. ThPID was created to offset the effect of inertia called hysteresis. The standard solution is based on a circuit that on / off heats with constant power. ThPID is a system in which, by adjusting the voltage at the setpoint temperature, the heating power that is currently needed is selected - minimizing the effect of temperature fluctuations. The ThPID system further allows the heating power of the furnace to be cut to a specified percentage, for example in the absence of power at the moment.The MTS is designed to provide realistic reading of the temperature of the oven. The standard measurement is based on a temperature measurement which is often wrong. MTS is a system of multiple sensors localized in the extreme places of the chamber.

See details

Advertise here