Single-head cutting machine

OMC RONDA 700

Condition: used, Year of construction: 2024, functionality: fully functional, Corrugated line 5 ply. Fully renewd 2024, 1650mm width. Steam matic, boiler steam producing 2500 kg/h. Max pressure 19 bar. Speed up to 70 metr per min. 1.⁠ ⁠Total Length: 55 metr 2.⁠ ⁠Total Power: 150 kw 3.⁠ ⁠Frame with shaft 4.⁠ ⁠Corrugated paperboard marching: diameter of corrugated rouer, electric adjust speed moter used. 5.⁠ ⁠Double cylinder gum mounting marchine: On the adoption, inside two layers draw the gun, dascend to carry the paper lead the paper roller. Machine exists units: Hydraulic shaftless mill roll stands, Spindle ¢ 240mm, hyperbolic heavy rocker, expand chuck , multi-point brake, hydraulic drive lifting, panning left and right on the middle. Top paper preheat cylinders and core paper preheat cylinders. Both preheat 360 degress area. Rcjdpfsw R Sknex Ab Ejd Single Facer Double Facer Blade scorer NC helical knife Glue system Gas system Steam system producing 2500 kg/h. Max pressure 19 bar. Working 12 bar. Top paper index 100g/㎡--180g/㎡ Ring crush index（N.m/g）≥8 (Water containing8-10%) Core paper index 80g/㎡--160g/㎡ Ring crush index（N.m/g）≥5.5 (Water containing8-10%) In paper index 90g/㎡--160g/㎡ Ring crush index（N.m/g）≥6 (Water containing8-10%)

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser power: 12,000 W, sheet thickness (max.): 30 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Supports 12m steel pipe cutting Equipped with fully automatic combined loading and unloading system One-stop intelligent loading, cutting and unloading, increasing production efficiency by 200% Supports multiple processes such as beveling, locking, cutting, punching, opening welding holes, cutting bolt holes, marking and marking Laser power 12,000 W – 20,000 W X-axis travel 1,600 mm Y-axis travel 1,900 mm Z-axis travel 900 mm A-axis rotation ±90° C-axis rotation ±90° U-axis travel 30 mm V-axis travel 13,000 mm Positioning accuracy ±0.1 mm Rcjdpfx Asw A H T Ajb Esd Max. workpiece section 1,000 × 400 mm Max. supported weight 5 T Supported profiles H-beam, channel steel, I-beam

Condition: new, Year of construction: 2026, No matter what job you need to cut A700 is the only saw you will ever need. With the largest capacity in its class and massive ±75º mitre angle range capability, it is designed for genuine high mitre angle cutting without compromising on the size of the aluminium profiles you may need to cut. Suitable for bundle-cutting many profiles at once and with high-precision. High-speed aluminium processing with precision PLC controlled motion. Pneumatic actuated safety guard, opening and closing with a press of a button for a full unimpeded saw table access. Safety switch disabling the saw on lifting of the guard. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø700 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor • Optional automated mitre control system Highly suitable for: • Bulk aluminium manufacture • Mitered aluminium structures manufacture • Windows and doors manufacture • Blinds, shades and furniture manufacture • Fabricated aluminium structures manufacture Rcedpfxsmb U Tuo Ab Esd • Aluminium facades manufacture

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, total width: 2,900 mm, total height: 3,300 mm, Used machine CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 3 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade Redpfoif Ek Rsx Ab Ejcd • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: new, Year of construction: 2025, saw blade diameter: 550 mm, input voltage: 400 V, compressed air connection: 7 bar, Equipment: documentation/manual, - Saw blade 550 mm - Double miter - 4 pneumatic clamps - Hydrocheck system - Mist lubrication system Rjdohzuu Nepfx Ab Eocd - 1 roller conveyor 300 cm - 1 roller conveyor 300 cm with length stop - Air blow gun - Protective cover - Documentation - 400V

Condition: used, Year of construction: 1983, grinding length 8400 mm grinding width 1450 mm workpiece height 1250 mm surface area 8000 x 1250 mm table height over floor 920 mm distance between columns 1470 mm workpiece weight max. 59700 kg weight of the machine ca. 59,7 t dimensions of the machine ca. 22 x 5 x 5 m Adjustment ranges: -Crossbeam, vertical 1250 mm -Grinding support, horizontal 3100 mm Adjustment speeds: -Machine table (X-axis) infinitely variable 1-45 m/min Table creep speed 5 m/min -Grinding support, horizontal (Y-axis) Rapid traverse 3000 mm/min Feed, step 0.001-0.099 mm Feed rate, continuous 100-3000 mm/min Creep speed 18+1 mm/min Tip infeed 0.001-0.019 mm Rcjdpfxjvr Hgve Ab Ejd -Crossbeam (W-axis) Rapid traverse 410 mm/min Table drive: -Oil transmission, Type Iv4 -Cylinder-Ø 185 mm -Piston rod Ø 130 mm -Drive motor 22 kW

Condition: new, saw blade diameter: 550 mm, compressed air connection: 7 bar, Equipment: documentation/manual, - Saw blade 550 mm - Double miter cut - 4 pneumatic clamps - Hydrocheck system - Mist lubrication system - 1 roller conveyor 300 cm - 1 roller conveyor 300 cm with length stop - Air blow gun - Protective cover - Documentation - 400V Rcjdpfxjrh Dkye Ab Esd

Year of construction: 2007, operating hours: 4,100 h, condition: good (used), functionality: fully functional, The machine is not more needed for our production and therefore its for sale. The machine is in our ownership from 2007 and it is regularly maintained. Everything works normal. Dismantling and load on truck are in price. Some more informations: 5-axis profile machining centre Designed for flexible and efficient machining of aluminium Autonomous clamp positioning Max. working lenght: 9.300 mm 12 pneumatic clamps Tool magazine with 20 tools capacity and saw blade 500mm Spindle working hours 4100h Redpfowwtw Djx Ab Ejcd Additional tehnical specifications available on request

Condition: excellent (used), Year of construction: 2009, operating hours: 8,303 h, functionality: fully functional, machine/vehicle number: 33365B, color channels: 5, paper weight (max.): 600 g/m², paper width (min.): 180 mm, paper width (max.): 520 mm, paper height (min.): 148 mm, paper height (max.): 360 mm, counter reading (color): 13,733,163, type of input current: three-phase, input voltage: 400 V, Equipment: documentation/manual, MAN Roland 50-5 HiPrint five-colour B3 sheetfed offset press, manufactured in 2009. The press is equipped with a control console, connected densitometer and CIP3 system, including the required hardware keys. This configuration offers efficient colour pre-setting and colour control, making the machine suitable for high-quality commercial printing, brochures, leaflets, labels, packaging-related work, and demanding short- and medium-run offset production. The machine has a low total sheet count for its age: approximately 13.7 million impressions. Main technical data: Max. sheet size: 360 × 520 mm Min. sheet size: 148 × 180 mm Max. image area: 350 × 515 mm Printing plate size: 459 × 525 mm Blanket size: 530 × 540 mm Stock thickness: 0.04 – 0.8 mm Printing start: 52 mm Max. speed: 13,000 sheets/hour Frequency: 50 Hz Software language: German Equipment and extras: ProfitPlus Comfort Electronic double-sheet detection Ultrasound double-sheet control at the feeder Blanket washing device with cloth / indirect washing Automatic ink roller wash-up device ATwash cloth system Dosing unit alpha.d Alcosmart alcohol stabilizer Additive dosing unit Carton guide complete with vacuum feed board EPL semi-automatic plate change system Venturi Air Transfer system Technotrans cooling and circulation system with automix device Weko T6 / Grafix 72 Digital Plus powder sprayer Grapho-Metronic register system PQC Plate thickness: 0.15 mm Rcedpfjzbyncjx Ab Eed Special value-enhancing extras: manroland control console with monitor and ink-key control CIP3 system with hardware keys Connected densitometer for precise colour control Double-diameter impression cylinders High impression force, suitable for thicker stock and carton work Documentation, installation CDs, spare parts and tools included Counters: Total impressions: approx. 14 million Operating hours: approx. 8,363 hours Inspection and service: The machine has been inspected by Man Roland service in Hungary. It is currently installed in our printing house and can be inspected by appointment in Budapest, Hungary. Advantages and applications: The press is suitable for high-quality commercial printing, brochures, leaflets, labels, forms, packaging-related work and other demanding offset printing applications. Thanks to the double-diameter impression cylinders and high impression force, the machine is also suitable for thicker stock and carton printing up to 0.8 mm. Condition: used, installed, available for inspection Location: Budapest, Hungary Terms: ex works Budapest

Condition: new, Year of construction: 2026, machine/vehicle number: SÇ 402 Alttan Çıkma Kesim Makinası, functionality: fully functional, • Compliant with CE standards. • Used for cutting aluminum and PVC profiles. • Hydro-pneumatic cutting operation. • Adjustable cutting speed according to the profile. • Capable of cutting at fixed angles to the right and left: -60, -45, -30, -22.5, -15, 0, +15, +22.5, +30, +45, +60 degrees. • Pneumatic vertical and horizontal clamps. • Ø550 mm diamond-tipped aluminum saw blade. • Equipped with roller conveyor (3 meters right and left). • Oil spraying system. Rjderahzgepfx Ab Eecd • Enables precision cutting thanks to the 3 kW motor and Hydro-check. • For use with a digital measuring meter.