Punching machine, eccentric press, mechanical punching machine

MUHR & BENDER - MUBEA KL 350 / 203

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, working width: 600 mm, input voltage: 400 V, overall weight: 3,560 kg, workpiece height (max.): 170 mm, The fast deburring machine for deburring, rounding and finishing steel cut parts up to 600 mm wide. This Q-Fin deburring and finishing machine was developed especially for applying a large radius of up to 2 mm on steel sheet. With the SER600 Super Edge Rounder from Q-Fin it is possible to deburr, grind, edge break, round off, remove slag, remove oxide skin or apply a line finish to sheet metal up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2024 machine is equipped with magnetic support, making it suitable for processing steel cut parts and other magnetic materials. This machine is equipped with as many as 5 machining stations. Easy operation through an HMI touch screen on the front of the machine. The first station of the SER600 consists of a grinding unit. The grinding belt of this unit removes burrs and/or burn-in points from the product surface. If you have no burrs, you can leave the grinding belt off or remove them. It is also possible to apply a line finish to your product with a finer grinding belt or finish with a scotch-brite belt. The second and the third station consists of the disc brush unit containing 4 oscillating disc brushes. The fourth and the fifth station consists of 2 round brushes, rotating counterclockwise and clockwise. With the brushes you remove the sharp edges of the product by breaking the edges or, by the unique combination of two brush systems, edge round them with a radius up to R=3 mm. The installation of special brushes makes this SER600 with magnetic system also very suitable to remove the oxide skin of steel products or slag from plasma cut products. Kfjdpol Dw D Ejfx Aa Esa We sell the combination with a WES6000 wet working grinding dust extraction system as 'SER600 Set'. The WES6000 was developed by Q-Fin to extract grinding dust safely and without pressure loss. This fully stainless steel extraction system is a wet-acting system that extracts grinding dust from stainless steel, steel and aluminum, eliminating the risk of fire and explosion. According to Q-Fin, it is the safest, easiest and most durable way to extract grinding dust. No more grinding dust in the air and/or work environment with the WES6000. At this moment we have two SER600 machines in stock: 1x new (built year 2025) 1x used for only a few months; as new. built year 2024. Both machines can be viewed by appointment in Bergeijk. Both machines have a 1 year warranty on construction and all non-wearing parts. We can also provide on-site installation of the SER600 + WES6000) including training for the operators. - Connected load SER600 machine: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Condition: good (used), Year of construction: 2002, From company liquidation: Kfsdpfx Aot Iklkea Eea Peddinghaus Peddimax 1002 Year of manufacture 2002 Max. Punching and shearing capacity: 1000 kN Punches 31 mm holes in 25 mm steel Shears on the flat steel shear to 500 mm up to a material thickness of 18 mm steel Contact length stop Many accessories (special punches) Special punching device SV 90 up to 90 mm holes Weight: approx. 3,000 kg

Condition: good (used), Manufacturer: WEINGARTEN Type: ER 125 Table size: 800x620 mm Kjdpfjn D Ebajx Aa Eefa A small crack is visible on the load-bearing part of the press; it has been used this way for years. !!

Condition: used, Year of construction: 1999, x-axis 6450 mm y-axis 400 mm z-axis 380 mm working lenght 6500 mm Number of tools 8 St. tool taper BT30 tool changing time 1,2 sec diameter of tools max. 80 mm turning speeds 6000 U/min Feed speed X = 34 m/min. Feed speed Y+Z = 18 m/min. total power requirement 8,5 kW dimensions 9800 x 3000 x 2400/3300 mm weight 5400 kg *Bar machining center, 3-axis machining of aluminum, plastic, steel Kfjdpfx Aaot H Sn Rs Eea and stainless steel profiles*

Condition: new, Year of construction: 2022, functionality: fully functional, input voltage: 400 V, ambient temperature (min.): 5 °C, ambient temperature (max.): 50 °C, ROBOTIC WELDING STATION ROBOARC_E WITH KUKA ROBOT ON POLE-ARM AND FRONIUS TPS 320I MT SOURCE - KUKA KR8 R2100 Arc HW robot. The robot uses a motion control system that compensates for the path of the torch, accelerates and decelerates, sets the travel speed and other coefficients. The robot can control multiple axes, divided into different groups. The groups of operations are independent of one another but can work simultaneously. - Fronius TPS320i CMT welding source Fronius TPS/i is one of the most modern welding sources, and with its huge power output of up to 320A, it meets the highest welding requirements for unalloyed steels, low-alloy steels, high-alloy steels and aluminum. Intelligent equipment, modular design and multiple options for system expansion provide the necessary flexibility and performance. - ROBOT CONTROLLER, PROGRAMMING PANEL (SMARTPAD) The SmartPAD is a hand-held programmer equipped with all the operating functions and indicators that are Kfedjt Dxwmjpfx Aa Esa necessary to operate and program industrial robots. - ILLUMINATED STATION SIGNALING COLUMNS The signal column is located on the fence of the station. The column corresponding to Station A has 3 signal lights, i.e.: green, red and orange, as well as a beacon sounder, at station B it has 3 signal lamps, i.e.: green, red and orange. - CONTROL CASSETTES WITH ILLUMINATED BUTTONS The illuminated buttons of each station of the station inform about the activity of the of the operation being performed to which the illuminated button corresponds.

Condition: good (used), Year of construction: 2002, machine/vehicle number: 022885001, Offer 24342 Technical data: - Fully automatic machine with hydropneumatic feed and MPS control system - with pre-programmable work cycles with infinitely variable speed regulation - Particularly suitable for stainless steel cuts - Workpiece clamping in pneumatic machine vice - Saw blade diameter 370 mm Kfsdpfx Aaot N Rk Nj Eoa - Cutting speeds infinitely variable 15 - 70 1/min - Miter adjustable Right up to 45°, left up to 45 - 60° - Cutting range at 90° around 130 mm - Rectangle 180 x 100 mm - Square 120 x 110 mm - mitred at 45° around 130 mm - Rectangle 120 x 100 mm - Largest opening width of the pneum. Machine vice 160 mm - Drive 400 V / 3 kW - pneumatic connection 6 - 8 bar - Coolant device - infeed - roller conveyor 1000 mm - Discharge - roller conveyor with stop + digital measuring device 4000 mm - Space requirement approx. W 7500 x H 2050 x D 1100 mm - Weight approx. 1200 kg

Condition: new, Year of construction: 2025, Bending machine with segments 1000/1.5mm This model SGR-1000mm is characterized by the removed upper and lower segments and also the bending beam is divided into segments. In addition, treadle is mounted to the opening of the upper bending beam. - Segments of an upper and lower clamping arm extends the application range, - Blockade by means of a pedal, the hands are free and you can freely position a sheet, - Folding machine for universal use in repair, - and body shops, - Compact design, modern shaped, - Manual folding machine for standard tasks, - Segments of an upper clamp enhance the bending ability Technical specifications: - Max. Working width; 1000 mm - Bending angle max. 160 degrees - Max. Sheet thickness (steel) 1.5mm - Weight 235 kg - segmentback width 30,40,50,60,70 and 100 mm Ksdpfx Aajcvbu As Ejfa Price excl. shipping We provide invoices with 0% of tax Delivery in one week from the order date

Condition: good (used), Working length 6000 mm Kfedpfx Aswlzg Nja Eoa 12-position automatic tool changer

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 1500050209, bar length: 12,000 mm, Bar machining center was purchased in 2022 as part of a partial business acquisition. For this purchase, an appraisal was prepared by the original owner. (Appraisal attached) The machine has hardly been used over the past three years as we have two other machining centers. Kjdpfsxlq Rbox Aa Eofa Bar machining center ex works (can be dismantled and collected at any time)

Condition: ready for operation (used), total length: 5,500 mm, total width: 1,400 mm, total height: 1,000 mm, empty load weight: 600 kg, Buisbuigmachine voor buis: dia 6 48 mm voor volledig materiaal: max 30 mm met gereedschap voor buisdiameter 21,3 / 26,9 / 33,7 / 42,4 / 48,3 mm Max dia tube x thickness: Ø 6 > 48 mm (45 kg / mm²) Kfjdpoxcqi Eefx Aa Eoa Max bendingradius: 180°