Used Zippo 1250 for sale (1,686)

Condition: ready for operation (used), functionality: fully functional, Invema radial drilling machine Arm length: 130 Drilling capacity in steel: 45 mm Crjdpfx Acezv T E Ne Tsg Accessories: cube

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 379082, Single-column vertical turning lathe | Schiess-Froriep 14 DKE 1250 The machine was overhauled in 2015 by Matschuk, recently cleaned and is in good condition. - Table diameter: 1,250 mm - Swing diameter: 1,500 mm - Turning height: 1,250 mm - Siemens control system type 840 Dsl - Tool holder Credpfxeyfurqs Ac Tog Inspection is possible at any time by prior appointment.

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 2,100 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: FANUC, controller model: FANUC 31i-A, workpiece height (max.): 1,725 mm, workpiece diameter (max.): 2,300 mm, workpiece weight (max.): 3,000 kg, rotary table diameter: 1,250 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 6,000 rpm, coolant supply: 70 bar, spindle motor power: 26 W, spindle nose: ISO 50, number of slots in tool magazine: 120, tool length: 650 mm, tool diameter: 300 mm, tool weight: 25,000 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED ​​horizontal machining center with pallet changer and 120 tools. Cjdpjxlcivsfx Ac Tjrg

Year of construction: 2005, condition: used, functionality: unexamined, machine/vehicle number: 46787, 46787 Machining center for centric turning operations on crankshafts or shaft-like components with 2 independent machining spindles. Control: Siemens 840D Tool holder: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter: Ø700 in nominal dimensions – tools are not included, but can be acquired or newly manufactured for an additional charge. Cjdezdpvgspfx Ac Terg NC-controlled steady rest supports – without steady rests Retractable 3-jaw chuck on both sides, manufactured by Blessing Automatic loading door from above with a loading interface Dedicated chip conveyor with high discharge The machine can currently be inspected while powered on. Setup of components is possible after consultation and for an additional charge, including documentation of replacement parts and tools. Safeguarding of the control system and drives is included – delivery free to site. This is the machine base of a 1250mm machine; however, the usable length is limited to approximately 680mm between centers due to the main drive shaft. With a new main drive shaft, a length of over 1050mm would be possible. Year of production: 2005 Machine for centric turning operations of crankshafts or shaft-typical parts with 2 individual machining spindles Machine control: Siemens 840D Tool adapter: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter Ø700 nominal – tools are not included and may be subject to a separate purchase or new procurement from the supplier. NC-controlled roller support – no workrest included Retractable 3-jaw chuck on both sides from Company Blessing Automatic gantry door for overhead loading and corresponding interface Individual chip conveyor with high drop Machine can be inspected while powered on upon request Setup of individual parts possible for a separate cost, including documentation of change-over parts and tooling Safeguarding of control and drives included – free location Machine base is DRZ1250 – effectively, on current driveshaft, limited to 680mm length; with a new driveshaft, it could be extended up to 1050mm.

Condition: good (used), WMW HECKERT BR 40/2 x 1250 radial drilling machine Crsdpfx Acszury No Tjg - Arm length: 1250mm - Maximum drilling diameter: 40mm - Morse taper: MK5 - Minimum speed: 20 RPM - Maximum speed: 1200 RPM - 3-speed gearbox with variable speed control - Dimensions of drilling head: (L x W x H) 710 x 710 x 500mm - Weight: 3000KG - Automatic feed - Dimensions (L x W x H): 2100 x 1000 x 2900mm

Year of construction: 2001, condition: used, Clamping force: 1250kN, tie-bar spacing: 475x450mm, injection unit: 440, max. flow rate: 100l/min, max. hydraulic pressure: 190bar, weight: 6.6t, an on-site inspection is possible. Cedpfszybu Tex Ac Tjrg

Condition: used, Year of construction: 1977, functionality: fully functional, machine/vehicle number: 6204, grinding length: 1,250 mm, grinding width: 450 mm, grinding height: 450 mm, overall weight: 4,500 kg, disc diameter: 400 mm, - Year of manufacture: 1977 - Fully functional, powered, ready for demonstration - Processing dimensions: 1250 x 450 x 450 mm - Grinding wheel diameter: Ø400 mm - Magnetic plate: 1200x400 mm - Power connection: 25.5 kW - Weight: 4,500 kg Csdpfx Acoxmf Iqj Tjrg - Machine no.: 6204 Net price ex-works Luckenwalde (Germany), unloaded, without transport

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: CR-Lack DK solo, Demag chain hoist crane lifting mechanism 1x 2500 kg, DKUN20-1250 K V1F4 Codpjzv H Htofx Ac Terg Payload: 1x 2500 kg / 2.5 tons, lifting capacity - 2-strand 5 chain hoists available!!! With articulated trolley drive, undercarriage prepared for mounting on approximately HEA/HEB/HEM profiles (flange width 300 mm) With 2 lifting speeds, lifting height 7 m!!! With floor control Length of the lifting mechanism approximately 1.25 m Total weight approximately 250 kg, connection to 400V 50Hz Very good condition, fully functional Item location is 75053 Gondelsheim See pictures.

Year of construction: 2010, condition: ready for operation (used), A complete turning line for the production of drive shafts, consisting of a Lang-Laru cut-off and centering machine, three EMAG lathes with robot automation, conveyor peripheral equipment and measuring station, is available. 1) End machining machine Lang-Laru DHZ 03/1250-RR-S, year of manufacture: 2010, tool stations: 2x12, loading: Kuka robot/EWAB conveyor, machine dimensions X/Y/Z: approx. 8600mm/3000mm/4100mm, weight: approx. 15000kg, control: Siemens Sinumerik 840D. 2) 3x vertical shaft turning centers EMAG VTC 250, year of manufacture: 2010, loading: Kuka robot/EWAB conveyor, max. turning length: 630mm, max. swing diameter over bed: 140mm, max. workpiece weight: 20kg, spindle bore: 52mm, speed: 5000rpm, tool stations: 2, tool holder: VDI40, machine dimensions X/Y/Z: approx. 8100mm/3300mm/4300mm, weight: approx. 14000kg, control: Siemens. This is a complete turning line with peripheral equipment and automation. Documentation available. An on-site inspection is possible. Credpfszfp Hhjx Ac Tsg

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, fuel type: electric, fuel: electricity, Equipment: second-hand vehicle warranty, IPC GANSOW 1250E SWEEPERS NEW 6V 175Ah GEL BATTERIES (SIAP) (4x) NEW NEOS 24V 20A RECTIFIER NEW, MAIN AIR FILTER 2014 production year New cylindrical brush combined with new side brushes provide excellent sweeping effect Highly efficient dust extraction turbine and new protective rubbers around the main brush prevent fine dust and dirt from rising after sweeping. The machine has a large waste flap for collecting larger waste. The device after a general, detailed renovation, operating fluids and parts such as bearings, drive belts, protective rubbers and filters have been replaced with new ones. Each device we offer has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Crjdpfx Aevunxfjc Teg Model: IPC GANSOW 1250 E Sweeping width (mm): 700 Sweeping width with two side brushes (mm): 1200 Efficiency with two side brushes (m²/h): 7800 Sweeping speed (km/h): 6 Tank capacity (l): 85 Filter surface (m²): 3.3 Dimensions L x W x H (mm) 1615 mm x 905 mm x 1210 mm Weight of the machine ready to work (kg) ~ 350 INCLUDED: NEW GEL BATTERIES 6V 175Ah (SIAP) (4x) NEW BATTERIES NEOS 24V 20A NEW, MAIN AIR FILTER New roller brush New side brushes New roller rubber guards 85l waste containers KEY FEATURES: Ergonomically designed cockpit and centrally located operator's seat provide good visibility of the cleaned surface IPC GANSOW 1250 E sweeper is a perfect machine for efficient, economical sweeping of multi-level parking lots, warehouses and production buildings as well as outdoor areas Battery power supply provides high flexibility, allowing work also in closed places, buildings, warehouses Large working width (1200mm) ensures high surface efficiency Very legible and intuitive control panel.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1002650004, total height: 3,170 mm, ram adjustment: 60 mm, installation height: 270 mm, table height: 1,300 mm, total width: 2,875 mm, total length: 2,875 mm, drop-through hole in table: 150 mm, table length: 1,250 mm, table width: 550 mm, pressing force: 50 t, control cabinet height: 2,200 mm, control cabinet length: 1,800 mm, control cabinet width: 600 mm, stroke adjustment: 60 mm, clearance between the columns: 1,290 mm, working width: 1,250 mm, distance between side stands: 260 mm, distance between stands: 1,690 mm, overall weight: 9,900 kg, punching force: 50 t, RASTER punching system RST 500-1250 DH with soundproof cabin and tool monitoring. The machine is in good condition. Stroke rate: 50 – 800 spm. Previously operated in single-shift mode. The machine can be inspected under power. Price on request. Crjdpjyyvgtefx Ac Tsg

Condition: good (used), Csepel RF50/1250 Radial Drilling Machine A robust and proven radial drilling machine from the quality manufacturer Csepel (Model RF50/1250). The machine is characterized by its solid construction and is ideally suited for metalworking shops, general workshops, or demanding DIY enthusiasts. Technical specifications (according to nameplate): Manufacturer: Csepel (Budapest) Type: RF50 / 1250 Power supply: 3~ (three-phase / 380 V) Frequency: 50 Hz Control voltage: 220 V Operating current: 10 A Required fuse protection: 16 A (slow-blow) Codpfezninwox Ac Tjrg You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2015, operating hours: 300 h, functionality: fully functional, power: 30.16 kW (41.01 HP), fuel type: diesel, color: red, fuel: diesel, driver cabin: day cab, gearing type: hydrostat, Equipment: all wheel drive, hydraulics, HAKO Citymaster 1250 Comfort Municipal implement carrier with 2-brush suction-sweeper unit This Hako Citymaster 1250 was first put into operation in 2015, has only approx. 300 total operating hours according to the hour meter, and is in very good overall condition with normal signs of use and wear. It has just undergone a major service and is immediately ready for operation. Comparable new price: €110,000! Additional accessories include a flatbed platform, a set of wide tires, and a municipal quick-coupling frame (KAT-Communal). Cedpfxoyglx De Ac Torg The sale is conducted as used equipment with no returns, warranty or guarantee. - Net price: €39,900 // Gross price: €47,481 - Viewing / test drive gladly possible - Nationwide delivery can be arranged; costs depend on distance. - We are happy to provide an attractive leasing or financing offer through our leasing partner!

Condition: excellent (used), Year of construction: 2011, 1. Weishaupt gas burner WM-G10 / 4-A. With Dungs gas piping DN 50. Design: ZM Year of manufacture: 2011 Output: 110 - 1250 kW. Connection pressure: 15-500 mbar. 2. Weishaupt gas burner WM-G10 / 4-A. With Dungs gas piping DN 50. Design: ZM Year of manufacture: 2005 Output: 120 - 1250 kW. Cedpfx Aszaa Uaec Tjrg Connection pressure: 15-500 mbar.

Year of construction: 2013, condition: ready for operation (used), number of axes: 3, This 3-axis BOSCHERT Compact 1250 Rota was manufactured in 2013. It features a working area of 1270 × 2000 mm and handles sheet thickness up to 6 mm. Equipped with a rotational tool changer, it offers versatile punching options and a user-friendly CNC control. Its compact design saves space while ensuring robust and durable construction. Ideal for batch and small to medium production runs. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Working area: approximately 1270 × 2000 mm • Maximum sheet thickness: up to 6 mm (standard setup) Crjdpfeyaihvjx Ac Tjg • Rotational tool changer for versatile punching • High precision and repeatability • User-friendly cnc control • Compact and space-saving design • Fast tool change for efficiency • Robust and durable construction • Automated sheet clamping for consistent results • Suitable for batch and small to medium production runs

Condition: like new (used), Year of construction: 2012, operating hours: 33,525 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 620 mm, rapid traverse X-axis: 1,250 m/min, rapid traverse Y-axis: 620 m/min, rapid traverse Z-axis: 620 m/min, nominal power (apparent): 22 kVA, controller manufacturer: Heidenhain iTCN530, workpiece weight (max.): 1,000 kg, rotational speed (min.): 15,000 rpm, overall weight: 8,000 kg, spindle speed (min.): 15,000 rpm, CNC controller: Heidenhain iTCN530 Axes X-axis travel mm: 1.250 Y-axis travel mm: 620 Z-axis travel mm: 620 C-axis degrees: 360º (0,001º) B-axis degrees: ±115 (0,001º) Cedoyybpmjpfx Ac Tjrg Worktable Table dimensions mm: 1.350 x 620 Max. workpiece weight kg: 1.000 Spindle Spindle speed rpm: 15.000 Spindle drive power kW: 22 / 17 Spindle torque Nm: 387 / 466 Tool system Tool holder: SK 40 Tool magazine slots: 60 Max. Tool Diameter: 150 Max. Tool Length mm: 220 Max tool weight kg: 7 Tool-to-tool time s: 3 Equipment Electronic Handwheel Signal lamp Tool breakage probe Paper band filter Chip conveyor with built-in scraper RENISHAW OMP 40-2 4th and 5th axis Lehmann (ø400 x 40mm x 40kg) Cooling Tank capacity: 340 L High-pressure bar: 20 Machine running times Under power: 75.294 Operating Time: 33.525 Basic machine dimensions / weight Weight kg: 8.000

Condition: as good as new (ex-display), Year of construction: 2003, functionality: fully functional, workpiece height (max.): 1,250 mm, workpiece diameter (max.): 1,950 mm, THE TURNMILL. BUILT IN THE EARLY 2000’S WELL IN ADVANCE AT THAT TIME. COPIED BY SEVERAL MANUFACTURERS SINCE. THIS IS THE ACTUAL DEMONSTRATION MACHINE USED IN HOUSE FOR THE COMPONENTS SEEN IN THE PHOTOGRAPHS THE TURNMILL IS A WONDERFULLY VERSATILE TURNING, MILLING AND GRINDING MACHINE WITHIN ITS CAPACITIES Crodpfsy Uxv Tex Ac Teg Swing 1950mm; turning 1500mm; workpiece height 1250mm; table speeds to 630rpm Condition perfect. Equipment extensive. Value for money - impressive

Condition: used, Year of construction: 2015, faceplate diameter 1250 mm swing diameter 1500 mm turning height 1250 mm Control Siemens type 840 Dsl tool taper 4 Pos. The machine was overhauled in 2015 by Matuschek. Siemens 840 DSL Shop Turn The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Cedoyqr S Ejpfx Ac Torg We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 1985, functionality: fully functional, spindle mount: MK 5, height adjustment type: mechanical, total width: 2,100 mm, total length: 900 mm, total height: 3,300 mm, overall weight: 3,000 kg, drilling capacity: 60 mm, clearance between the columns: 1,100 mm, spindle speed (max.): 1,200 rpm, spindle speed (min.): 20 rpm, spindle stroke: 400 mm, Radial drill BR 40/2 x 1250. Prod. Heckert (GER). Year 1985. Max drilling diameter in steel (mm) - 60 mm Max threading diameter in steel - M24 Max workpiece height - 1100 mm Spindle stroke - 400 mm Arm length - 1250 mm Arm rotation - 360 Drill attachment - MK5 Rotation speed range (rpm) - 20-1200 rpm Feed range - 0.063-0.63 mm/rev Base plate mounting surface - 1400 x 800 mm Table dimensions - 650 x 650 x 500 mm Machine dimensions width x depth x height - 2100 x 900 x 3300 mm Motor power - 3.7 kW Codpfxswazbvj Ac Terg Weight - 3 tons

Condition: good (used), Year of construction: 2006, machine/vehicle number: 38461, Offer 26186 Technical data: - max. working width 1275 mm - max. material thickness (at 40 kg tensile strength) 3 mm - front angle stop - front material supports approx. 300 mm - rear stop, manually adjustable 5 - 650 mm - stroke rate approx. 32 /min - cutting angle 1.9 ° - preselection for single stroke / continuous stroke - drive 400 V / 3.0 kW - E – foot switch - protective guard on the rear of the machine Cjdpfxoztvn Us Ac Tsrg - space required, including rear stop, without front support arms - approx. W 1500 x H 1150 x D 1450 mm - weight approx. 1200 kg

Condition: used, volume flow: 1,250 m³/h, suction capacity: 1,250 m³/h, Büchel ENF1250 Extraction System, Air Filter, CNC Machine, Emulsion Mist Separator Used, as shown in the pictures. Csdpezkak Usfx Ac Torg From warehouse stock (may show signs of storage). For further technical information, please refer to the pictures. Scope of supply: as shown in the picture. With invoice. The invoice will be enclosed with the shipment. Payment method: Bank transfer Self-collection Information regarding bank details, payment terms, etc., will be sent to you by email. W117

Condition: excellent (used), Year of construction: 2008, I sell the press for glulam glued massive wood LISY DVORAK TH6, year 2008. Material size 3000 X 1250 x 50mm 6 working areas, manual rotation. 6 pcs hydraulic cross pressures per 1 area / pomp 1,1 KW 6 pcs manual pressures per 1 area Self weight 1200kg. Very good condition. Available immediately. Codjkd Drhepfx Ac Torg

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, overall weight: 120,000 kg, total height: 5,600 mm, pressing force: 1,250 t, air pressure: 6 bar, distance between side stands: 1,200 mm, distance between stands: 1,400 mm, stroke length: 500 mm, table length: 1,850 mm, table width: 1,600 mm, Straight-sided eccentric press ERFURT type PKZe 1250 Superb working condition, after full, professional overhaul. After - newer used. Specification: Capacity: 1250 ton force Slide stroke: 500 mm Slide adjustment: 215 mm Maximum shut height between bolster plate and slide (stroke down, adjustment up): 860 mm Bed area (width x depth): 1600x1850 Slide area (width x depth): 1300x1400 mm Opening in the bed (width x depth): 1100x1100 mm Main motor rating: 90 kW at 1478 RPM Ram adjusting motor rate: 7.5 kW at 1450 RPM Number of single strokes: 8 min-1 Cushion capacity: 200 ton force Cushion stroke: 200 mm Height above floor: 7900 mm Credpeubyrxefx Ac Tog Press weight: 130 000 kg.

Condition: used, Technical details: table length: - mm table width: - mm table load: - t height: 1250 mm Csdezuzr Ispfx Ac Torg width: 1000 mm depth: 800 mm weight of the machine ca.: 1200 kg 2 units available (price per unit) According to DIN 650: 6 × T-slots When making your inquiry, please specify the number of clamping angles required. *

Condition: ready for operation (used), functionality: fully functional, RADIAL DRILLING MACHINE DORMAC 1250 X 50 RAPID 50 MODEL USED MACHINE Crodpsziciqofx Ac Tog INTERNAL CODE: SVR 219