Used Zopf Zb 60 M for sale (71)

Condition: used, functionality: fully functional, Year of construction: 1996, Ring bending machine, ZOPF model ZB 60 M - motor-driven - Two-roller drive - Shaft diameter 30 mm - with standard rollers - Bending capacity up to round tube 48 x 3.2 mm - Solid material up to 30 mm - Weight approx. 180 kg Njdpfjzl Ud Ejx Aprjwk - Motor 0.75 kW, 400 V, 50 Hz, 3-phase

Condition: new, Year of construction: 2026, Ring Rolling Machine Zopf - Model ZB 60 M standard basement Nsdsgh T H Djpfx Aprowk - year of construction 2023 - motorized - two working rolls - shaft diameter 30 mm - including standard rolls - bending capacity round tube up to 48 x 3,2 mm - solid material up to 30 mm - weight around 150 kg - motor 0,75 kw 400 Volt 50 Hz 3 phase

Condition: new, 95 mm Shaft diameter 30 mm Shaft revolutions 7 U/min roll diameter 132 mm Drive 0,75 kW weight 220 kg range L-W-H 530x900x660 mm Equipment / Accessories: Nwedpeyv N A Hofx Aprek - Two driven rollers with grooved surface - Manual feed of the upper roller - working position horizontal and vertical (with tilting base) - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn different profiles are used e.g. Flat iron, T-iron, solid material etc.

Condition: new, Year of construction: 2026, Ring Rolling Machine Zopf Nwodjgh T Hkepfx Aprek - Model ZB 60/3 MD - year of construction 2026 - motorized - with digital readout - three working rolls - shaft diameter 30 mm - including standard rolls - bending capacity round tube up to 48 x 3,2 mm - solid material up to 30 mm - weight around 150 kg - motor 0,75 kw 400 Volt 50 Hz 3 phase - including basement horizontal and vertical

Condition: new, Year of construction: 2026, Ring Rolling Machine Zopf - Model ZB 60 MD - with digital readout - motorized - two working rolls - shaft diameter 30 mm - including standard rolls Nwjdpfjd Eyp Iex Aprek - with basement - bending capacity round tube up to 48 x 3,2 mm - solid material up to 30 mm - weight around 180 kg - motor 0,75 kw 400 Volt 50 Hz 3 phase

Condition: new, Year of construction: 2025, Bending machine ZB 70/2 M Nodpfx Ajt Hwfnoprowk - with foot pedal - with standard roller set - two driven shafts - mecanical adjusting of the center roller - working position horizontal and vertical - shafts are supported by conical bearings - slide bars on the slide -support are exchangeable - shaft diameter: 40 mm - roller diameter: - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,1 kW - adjusting way: 120 mm - weight: 400 kg - dimensions: 900x600x1100 mm

Condition: used, Year of construction: 1999, I - beam section - flat steel 100 x 15 (d 400) mm I-beam section - upend 60 x 10 (d 500) mm L-beam 50x50x6,0 (d 600) mm round material 35.0 (d 500) mm bar material dia. max. 70 x 1.5 (d 1500) mm square material 50x50x3.0 (d 1400) mm bending speed 8.5 U/min roll diam. toproll 152 / 162 mm bore 40.0 mm voltage 400 V Stroke length 120 mm total power requirement 2.2 kW weight 470 kg range L-W-H 900 x 600 x 1100 mm Original price with accessories: approx. 10,000 euros Features: - Two driven rollers (lower rollers) - Manual feed of the upper roller - Horizontal and vertical working positions - Shafts mounted with tapered roller bearings - Lateral, manually adjustable stop rollers Nwjdpfxozlulve Aprek - 1 set of standard rollersâ??split - 3 sets of tube rollers - 1 freely movable control unit - Operating instructions

Condition: new, 50 mm 8,5 U/min 100 kN roll diameter 162 mm Drive 1,5 kW range L-W-H 1100x800x1500 mm Nwedey H N Hmjpfx Aprok weight 450 kg Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set

Condition: new, Year of construction: 2026, tube bender R2 ZOPF - without bending tooling - with foot pedal and emergency stop - without tooling - control unit - 100 programs of 9 bends each - precise electronic control of C-shaft - manual and automatic bending mode - bending angle and springback angle are programmable by means of a microprocessor - rapid engagement and disengagement of the tooling - scale for counterbending holder - movable - dimensions 930x410x1000 mm - weight 280 kg - motor 1,5 Kw - 400 V 50 Hz 3 ph. - bending radius R55 - R340 mm Njdsdkxkxepfx Aprewk - bending capacity of tube Ø 5 mm to 60 mm - max. Bending angle of 210 °

Condition: new, Year of construction: 2025, Ring Rolling machine ZOPF - model ZB 30/3 MD TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - manual adjusting of the center roller - working position horizontal and vertical (optional) - digital readout - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 20 mm - roller diameter: 76-86 mm - shaft rpm: 11 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 0,18 kW - adjusting way: 35 mm - weight: 85 kg Nodpfsdktnvox Aprewk - dimensions: 530x420x500 mm

Condition: new, 40 mm 8,5 U/min 120 mm roll diameter 152 / 162 mm engine output 1,1 kW connected load 400 V weight 395 kg Overall size 900x600x1100 mm Equipment / Accessories: - Two driven rollers - Manual delivery of the upper roller - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn different profiles are used Nwodpfx Apsy H N I Dsrjk

Condition: new, Year of construction: 2025, Bending machine ZOPF ZB 140/3 H 2 - compl. with standard roller set, - digital readout for left and right axis - hydraulic side guides - three smooth driven rollers - planetary movement of bending rolls - working with both vertical and horizontal shafts - built according to the CE rules - bending capacity steel up to 110x25 mm -shaft diameter 110 mm -Rolls diameter 350 mm -working speed 5 m/min -installed power 7,5 kw -weight 2950 kg -module max Wcm3 157 -400 Volt 50 Hz. 3 ph. Nsdpfxed A Nb Ho Aprjwk

Condition: used, Year of construction: 1993, 3 Rollers Bending Machine ZOPF TRENNJAEGER RS 302 ME Nsdpfx Apozwcnpsrewk Year of construction: 1993 Capacity: 1/4'' to 1 1/2'' - Ø 10 mm to Ø 60 mm Rectangular tube 50 x 30 x 3 Square tube 40 x 40 x 3 (see description on photo) Delivered with: 1 set of rollers 1'' - 6/4'' - 1 1/4'' + various (see photos) Voltage: 380 V Dimensions (L x W x H): 1000 x 1000 x 1600 mm Weight: approx 200 kg

Condition: new, Year of construction: 2025, Ring Rolling machine Zopf profile bending machine model ZB 100/3 H - with NC control - three driven shafts - hydraulic adjustment of center roller - working position horizontal and vertical - shafts are supported by conical bearings - slide bars - shaft diameter 60 mm - roller diameter 215 mm - main motor 1,5 kw - hydraulic mtor 1 kw - hydraulic pressure 18 ton - bending capacity flat material up to 80x15 mm on edge - round tube up to 100x2,0 mm - angle iron leg in and out side 70x70x8 mm - weight 800 kg Nsdpfxjd Ey A Ae Aprjwk NC control unit: two axes controlled touch screen memorize of 1000 programs interpolation

Condition: new, Year of construction: 2026, Ring Rolling machine Zopf Nwsdpfed Eyz Uox Aprek profile bending machine model ZB 100/3 H - three driven shafts - hydraulic adjustment of center roller - digital readout with memory - working position horizontal and vertical - shafts are supported by conical bearings - slide bars - shaft diameter 60 mm - roller diameter 215 mm - main motor 1,5 kw - hydraulic mtor 1 kw - hydraulic pressure 18 ton - bending capacity flat material up to 80x15 mm on edge - round tube up to 100x2,0 mm - angle iron leg in and out side 70x70x8 mm - weight 800 kg

Condition: new, Year of construction: 2024, Ring Rolling machine ZOPF - model ZB 30/3 H (without basement) TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - digital readout programmable - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable Nwjdpfogh T Iajx Aprsk - shaft diameter: 20 mm - roller diameter: 76-86 mm - shaft rpm: 11 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 0,18 kW - hydraulic motor 0,55 kw - adjusting way: 35 mm - weight: 110 kg - dimensions: 530x420x500 mm

Condition: new, Year of construction: 2026, Profile Bending Machine ZOPF - Model ZB 110/3 H TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - digital readout with memory - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 80 mm - roller diameter: 260 mm - shaft rpm: 7 U/min Nwodedkxibopfx Aprjk - voltage: 400V 50Hz 3Ph - drivingmotor: 2,2 kW - motor for hydraulic: 1,5 kW - hydraulic pressure: 27 to. - adjusting way: 170 mm - weight: 1400 kg - dimensions: 980x1430x1600 mm

Condition: new, Year of construction: 2025, Bending machine ZOPF new - model ZB 80/3 H - with foot pedal - with standard roller set Nwedpedkxiysfx Aprjk TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - digital readout with memory - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 50 mm - roller diameter: 192 mm - shaft rpm: 7,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,5 kW - motor for hydraulic: 0,75 kW - hydraulic pressure: 10 to - adjusting way: 120 mm - weight: 680 kg - dimensions: 900x800x1300 mm

Condition: good (used), Year of construction: 1996, Offer 24407 Technical Data: - 2 motor-driven rollers - Hydraulic adjustment of the top roller; pressing force: 18 t - Shaft diameter: 60 mm - Shaft rotation speed: 6 rpm - Roller diameter: 215 mm - Bending capacity: Nwodpfxoy Ddrfe Aprok - Flat bar R 300 vertical: 80 x 15 mm - Flat bar R 300 horizontal: 120 x 25 mm - Square material R 300: 50 mm - Round tube R 900: 100 x 2 mm - Drive: 400 V / 1.5 kW - Includes: separate control panel with digital readout + foot switch - Forward / reverse operation - Side guide rollers - Standard bending set for flat and angle material - Weight: approx. 1200 kg - Space requirement: approx. W 1000 x H 1750 x D 1250 mm

Condition: as good as new (ex-display), Year of construction: 2026, shaft diameter: 60 mm, bending machine model AHB 60 ZOPF - three roller driven - two hydraulic adjustments - 2 digital readout with memory - standard roller set Nwedpfxjdkxvmo Aprek - horizontal and vertikal use - 60 mm shaft HS-Code: 8462 2998

Condition: new, Year of construction: 2026, Bending machine ZB 70/3 H NC Zopf - semiautomatic - with foot pedal - with standard roller set TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 40 mm - roller diameter: 152/162 mm - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,1 kW - motor for hydraulic: 1,1 kW - hydraulic pressure: 8 to Njdpefkz Rbjfx Aprowk - adjusting way: 120 mm - weight: 490 kg - dimensions: - colour RAL5012 / RAL7015 NC-CONTROL for ZB 70/3 HA: - two axes controlled - touch screen - memorise of 1000 programs ech 19 steps - interpolation - accuracy of the y-axes 1/10 mm - programmable forward and backward

Condition: excellent (used), Year of construction: 1992, Shaft diameter: 40 mm Bending capacity: Flat bar edgewise at 500 mm Ø: 60 x 10 mm Flat bar flatwise at 400 mm Ø: 100 x 15 mm Square bar at 500 mm Ø: 35 mm Angle iron, leg outwards at 450 mm Ø: 50 x 50 x 6 mm Angle iron, leg inwards at 600 mm Ø: 50 x 50 x 6 mm T-section, T outwards/inwards at 600 mm Ø: 60 x 60 x 7/50 x 50 x 6 mm Round bar at 500 mm Ø: 35 mm Nwedox Anpvspfx Aprjk Shaft speed: 7.5 rpm Electrical connection: 380 V, approx. 1.7 kW Space requirement: 910 x 640 x 1400 mm Weight: approx. 480 kg

Condition: new, Year of construction: 2009, 30 mm 30 mm L-beam 20 x 20 x 4 mm flat steel 25 x 6 mm Axis diameter 20 mm work speed 11 U/min total power requirement 0,2 kW Nwodpfx Apsv Skzdjrsk weight of the machine ca. 80 Kg dimensions of the machine ca. 0,6 x 0,6 x 1,5 m Profile bending machine with: - Foot pedal for right/left rotation - Digital display - 1 set of standard rollers - 3 rollers are driven - Horizontal or vertical operation

Condition: new, Year of construction: 2023, Horizontal bending machine AH 20 with backgauge - ZOPF - with semi-automatic control - hydraulic pressure 20 to. - length of stroke - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 250 mm - motorcapacity 2,2 KW - 400 V 50 hz 3 ph. - working height 900 mm - closed table - replaceable wear plate - weight 950 kg - bending capacity: flat material max. 150x12 mm Nodpewyt Tqofx Aprowk round tube up to 48 mm

Condition: new, 40 mm 8,5 U/min Njdpfx Apey H N H Hsrswk 120 mm roll diameter 152 / 162 mm engine output 1,1 kW connected load 400/50 V/Hz hydraulic pump 1,1 kW 80 kN range L-W-H 900 x 600 x 1000 mm weight 470 kg Equipment / Accessories: - Three driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles