Used Wooden Blinds Punching for sale (4,873)

Condition: excellent (used), Year of construction: 1968, functionality: fully functional, machine/vehicle number: 32250, Size 64 x 90 cm, for diecutting only, excellent condition Gedpfew Inz Djx Afnoin Machine no.: SBDS32250

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: MR510726330, punching force: 30 t, total width: 4,840 mm, total length: 3,630 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, working range: 2,500 mm, overall weight: 7,500 kg, table width: 4,840 mm, table length: 2,800 mm, compressed air connection: 8 bar, stroke length: 2,500 mm, feed rate X-axis: 68 m/min, feed rate Y-axis: 68 m/min, feed rate Z-axis: 68 m/min, Equipment: safety light barrier, Euromac MTX Plus hybrid 1250 Gedpfxoyhwv Ij Afnjin - Equipped with the latest control system and touch operation - Year of manufacture: 2015 - Few operating hours, very good condition - 3 multitools with 8 stations each - Numerous punches included

Condition: used, Single-Column Eccentric Press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture: 1962 Pressing force: 63 tons Throat depth: 260 mm Table size: 630 x 530 mm Table opening: Ø 210 mm Ram area: 315 x 260 mm Adjustable ram stroke: 8–100 mm Ram adjustment: 63 mm Ram shank bore: Ø 40 mm, with clamping piece Installation height: max. 450 mm Strokes per minute: 115 spm Air requirement: min. 4.5 bar Motor power: 4 kW Electrical connection: 380 Volt, 50 Hz Table height above floor: approx. 750 to 900 mm - Electric stroke release via foot switch or two-hand control Gedsk S Htxopfx Afnein - Overload protection by shear plate - Clutch-brake combination via WEINGARTEN friction-threaded clutch with TDC safety - Front crankshaft support bearing - Press table height adjustable via 2 threaded spindles - Manual central lubrication system - Free-standing electrical cabinet - UVV (accident prevention regulations) for manual loading operations Space requirements (L x W x H): 1750 x 1600 x 2430 mm Weight: 4.5 tons In good condition

Condition: excellent (used), Year of construction: 2006, Kaiser Press KSTU 500-30-75 RK Press force: 500 tons Stroke adjustment: 50-250 mm Ram adjustment: 200 mm Strokes per minute: 20-80 1/min Max. installation height: 700 mm Table area: 2,500 x 1,400 mm Ram area: 2,500 x 1,250 mm Feeder Andritz Kaiser Max. strip width: 800 mm Max. strip thickness: 5.0 mm Straightening machine FECKER Max. strip width: 800 mm Max. strip thickness: 6.0 mm Giedsyhh Nbspfx Afnsn Decoiler FECKER Strip width: 800 mm Load capacity: 8,000 kg

Condition: excellent (used), Year of construction: 2001, Kaiser punching machine Giedpjyhh I Rsfx Afnsn Type: KSTU 4000-25-6P Pressing force: 4,000 kN Table surface: 2,500 x 1,250 mm Pedal surface: 2,500 x 1,100 mm Installation height: 700 mm Pedal stroke: 40-250 mm Pedal adjustment: 200 mm Stroke rate: 20-100 1/min Machine overhaul in 2018 Space required: 4.8 x 3.2 x 5.5 m (LxWxH) Weight: 78,000 kg ARKU strip system Strip width 120 - 800 mm Strip thickness up to 6.0 mm ARKU decoiler Load capacity 8,000 kg

Year of construction: 2021, condition: good (used), Die-cutting and embossing machine Manufacturer: Heidelberg Model: Promatrix 106 CS Year of manufacture: 2021 Godpfx Aevxu Smsfnoin Min. sheet format: 300 x 350 mm Max. sheet format: 760 x 1,060 mm Max. machine speed: 8,000 sheets/h Max. die-cutting pressure: 2.6 MN / 260 t Materials and stack height (incl. pallet) Paper min.: 90 g/m² Cardboard / solid board max.: 2,000 g/m² Corrugated board max.: 4.0 mm Feeder pile height: without Non-Stop max.: 1,500 mm in Non-Stop operation max.: 1,200 mm Max. feeder pile weight: 1,500 kg Without blank separating station Without MasterSet 21126ä

Condition: good (used), Year of construction: 2000, Punching Press Godpfx Aeul S Eaefnjin Manufacturer: EHT Model: Strippit 1500/30 Year of manufacture: 2000 CNC Control: Fanuc Working area without repositioning: 2500 x 1500 mm Max. material thickness: 8 mm Punching force: 30 tons Turret with 46 tool stations, including 4 index stations size D 3 programmable clamps Metal table Used exclusively in single-shift operation Including WILSON TOOL tooling 9226ä

Condition: good (used), Punching machine, pneumatic punching machine, punching device, hole punching machine -Insert tool -for small stamping jobs -Control: pneumatic -Dimensions: 610/660/H1200 mm Gsdpsb A I Twjfx Afnein -Weight: 75 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, laser power: 4,000 W, X working area max.: 3050 mm Y working area max.: 1550 mm Control: Rexroth IndraMotion MTX Laser power: 4,000 watts Standard equipment: Machine - Sturdy, easily accessible C-frame - Coordinate guidance for high-precision machining - Linear tool changer with 21 tool stations and 4 clamps - Maintenance-free three-phase drive motors - Repositioning device with programmable hold-down - Foot switch for closing clamps - 2 good parts containers - Automatic shutoff Laser station - TruFlow laser - High-frequency excitation - Cooling unit - TASC 3 laser controller - Enclosed beam guidance - Beam tube ventilation with compressed air - Programmable cutting gas pressure - Laser cutting head with 170 mm focal length - Universal quick-change cutting head device UTI with bus connection - LensLine - FocusLine - ControlLine - NitroLine - SprintLine - ContourLine - FlyLine - PlasmaLine - High-speed cutting - Additional Xp and Yp axes - Ejector cylinder for laser parts - Fast flap for laser parts 500 x 500 mm - Liftable laser cutting support - Slag cone detection - Laser logbook function Gisdjya U Twepfx Afnen Punching station - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down with adjustable force - Stroke counter for punches - Spray lubrication for punches - Punch slug extraction - Warp detection - Flap for punched parts 500 x 500 mm - Fill level monitoring in the punching console Control - Open control system based on Bosch Rexroth IntraMotion MTX - Operating panel with 15" TFT touchscreen - Program management and 80 GB storage capacity - Diagnostic function with laser logbook - Integrated technology data - Teleservice Data transfer - Network connection RJ45 and USB interface Safety - CE marking - Multi-beam light barriers - Monitoring system for, among others, gas pressure, temperature, cooling water - Hydraulic quick shut-off - Protection against stray radiation - Compact extraction unit - TruFlow 4000 - Vibration-dampened installation - Thread forming function - MultiTool function - Chip conveyor with tilting container - Active die - Ejector for small parts - Brush tables with loading aid - Marking function - Repositioning cylinder - Warp detection

Condition: new, punching pressure 28.0 t punching cross-cut in cmm 31 in 7.0 mm ST throat 250 mm dayligth 223 mm no. of strokes 10 - 30 Hub/min oil volume 32.0 ltr. work height max. 1033 mm total power requirement 3.0 kW weight of the machine ca. 553 kg dimensions of the machine ca. 730 x 540 x 1530 m Furnishing: - Punch quick-change device up to Ø 31 mm - green series - installed: round punch no. 5 Ø 25.0 mm and round die no. 3 Ø 25.7 mm - Free: LED lighting in the punching area Gijdpjw U U S Nofx Afnen - Swiveling scraper (plates exchangeable) - Various material support tables are available separately - Brace - 2-step foot switch, with double press for grain search function - electrical controls - Stroke length and stroke position continuously adjustable - integrated hydraulic unit with oil filling - Performance specifications apply to a material strength of 450 N/mm² - Main connection cable and plug for 16 amps are not included in the scope of delivery

Condition: used, Year of construction: 1997, sheet width 1015 mm plate length 1015 mm plate thickness 6,0 mm Punching capacity 25 t punch diameter 88,9 mm total power requirement 16 kW weight of the machine ca. 12000 kg dimensions of the machine ca. 4000 x 2320 x 2300 mm Equipment: - Tool changer with 20 positions - FANUC Series O-P control Giodjuiz Iwjpfx Afnen - Foot pedal - Operating instructions (English)

Condition: used, pressure 30.0 t punching cross-cut in cmm 30.0 in 9.0 mm stroke ca. 35 Hub/min Gisdpfx Afexaaiponjn throat 610 mm stroke - stepless adjustable 0 - 28.0 mm oil volume 35.0 l work height max. 1010 mm total power requirement 4.0 kW weight of the machine ca. 1200 kg. range L-W-H 1400 x 700 x 1600 mm good condition (!!) with a lot of application tools (stamps/dies) Furnishing: - electro-hydraulic hole punch, with large throat - Material/sheet metal scrapers including scraper plates - Large material support table, with adjustable depth stops - continuous stroke adjustment - freely movable foot switch including protective cover - Forklift pockets for easy transport - side storage area - lots of accessories + tools - including tool cabinet - Matrix base (for special size matrices) - Stamp holders (for special size stamps) - original user manuel

Condition: used, pressure 100 t Gisdpfx Aoxabrfsfnsn punching cross-cut in cmm Ø 31 in 25 mm stroke 10 - 50 mm column arm 510 mm work height max. 1100 mm no. of strokes 14 - 45 Hub/min punch diameter max. Ø 90.0 mm oil volume 103 l total power requirement 7.5 kW weight of the machine ca. 2400 kg. range L-W-H 1750 x 1020 x 2050 mm maintained condition (!!) New price without accessories approx. 25.000 euros Special price on request Furnishing: - heavy / robust electro-hydraulic hole punch, with large throat - Punching station with material/sheet metal scraper - stepless stroke adjustment .. 10-50 mm - freely movable foot switch including protective cover - hydraulic low pressure finder for foot switch operation - Crane hanging eye for easy transport - side storage area - Hydraulic unit, integrated - Three-phase motor, 400 volts, 50 Hz - original instruction manual

Condition: used, Year of construction: 1991, pressure 70.0 t punching cross-cut in cmm 27 in 20 mm punching cross-cut in cmm 32 in 14 mm work height max. 1060 mm Giedpfx Afsxabu Tsnjn column arm 500 mm weight of the machine ca. 1500 kg. total power requirement 7.0 kW range L-W-H 1550 x 1200 x 1950 mm good / well-maintained condition (!!) New price approx. 21.000 euros Special price on request Equipment: - electro-hydraulic hole punch, with large projection - large GEKA stop table with movable stop system - sheet metal stripper with stripper plates - stepless stroke adjustment - die base - 1x freely movable foot switch - operating instructions (PDF)

Condition: excellent (used), METALLKRAFT Profile Steel Shear / Punch HPS 65 DS Combined Hydraulic Profile Steel Shear and Punch with Punching Station, Notching Station, and Flat Steel, Angle Steel, and Profile Steel Shear – enables simultaneous operation at punching and profile steel shear. Punching Station - Punching Force: 65 t - Punching Capacity: max. Ø 26 x 20 / Ø 57 x 10 mm* - Throat Depth: 305 mm - Stroke Length: max. 55 mm - Number of Strokes: 25 strokes/min - Working Height: 900 mm Rod Steel Shear - Cutting Capacity Round: max. Ø 45 mm* - Cutting Capacity Square: max. 45 x 45 mm* Angle Steel Shear - Cutting Capacity L-Profile 90°: 120 x 120 x 12 mm* - Cutting Capacity L-Profile 45°: 70 x 10 mm* - Cutting Capacity U/I Profile: 120 x 58 mm - Cutting Capacity T-Profile: 90 x 11 mm - Working Height: 1,140 mm Flat Steel Shear - Cutting Capacity 90°: max. 300 x 20 / 375 x 15 mm* - Miter Cut 45°: max. FL 100 x 15 mm* - Blade Length: 380 mm - Working Height: 900 mm Notching Station - Material Thickness: max. 10 mm* - Notching Width: max. 45 mm - Notching Depth: max. 90 mm - Notching Station: 100 x 100 x 10 mm Machine Data - Motor Power: 5.5 kW | 400 V - 50 Hz - Dimensions (LxWxH): 1700 x 950 x 1880 mm - Weight (net): approx. 1,600 kg Shipping on pallet via freight forwarder possible Europe-wide. Additional machines available! Take a look at our listings. If you have any questions, feel free to contact us by message or phone: Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Gijdpfjxizansx Afnjn

Condition: used, Year of construction: 2004, sheet width 1000 mm plate length 2000 mm plate thickness 6 mm Punching capacity 280 kN Control Boschert connected load 18 kVA Gedpeyi Hpcefx Afnjin fuse 3 x 20 A total power requirement 15 kW weight of the machine ca. 11 t dimensions of the machine ca. 4,5 x 2,8 x 2,0 m Multi-tool various stamps / dies

Condition: used, Year of construction: 1959, The Heidelberg OHT, manufactured in 1959, is a machine with an A4 format. It is currently in production and located in Germany. The delivery terms are FCA. Format: A4 Equipment: Giedpfx Afovfxwtjnjn Letter Press Tiegel - DIE Cutter Punching force 40 tons Size min.: 40 x 70 mm Standard chase: 260 x 340mm Speed min.: 2.200 sph - max. 5.500 sph

Condition: ready for operation (used), Year of construction: 1997, Working area: 2500 x 1280 mm Godpfx Afex Tr S Sonoin Punching force: 220 kN For sheet thickness up to: 8 mm Weight approx.: 11 t

Year of construction: 1994, condition: ready for operation (used), Working area: 3085x1650mm, max. punching force: 220kN, max. sheet thickness: 8mm, max. stroke rate: 750/min, max. workpiece weight: 230kg, max. punching diameter: 76mm, connected load: 19kVA, control: Bosch Trumagraph CC 20S, weight: 13.8t, operating hours: 84,400h, with storage interfaces for forward/backward storage, swing-back clamps, multitool control, air-suspended installation, chip conveyor with container, soft punch, thread forming and TrumaLift SheetMaster 1600 FMC, has been regularly serviced, on-site inspection is possible. Gjdpsq Ewi Asfx Afnsin

Year of construction: 1972, condition: ready for operation (used), Format: 1000x700mm, an inspection is possible. Gijdpjqzkdqefx Afnen

Year of construction: 1977, condition: ready for operation (used), Pressing force: 160kN, stroke speed: 200-1000/min, with automatic handling/ infeed and documentation. Gijdpfx Afspgycbjnjn

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Giodpfx Aox U Eiasfnon Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Condition: good (used), Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears, punching and notching machine -Manufacturer: Mubea, profile steel shear punching and notching machine type HIW 600 -Pressure force: 60 to -Applications: punching, shearing, cutting, notching -Punching: Throat depth 260 mm -Accessories: incl. punching tool, see photos -Dimensions: 1470/960/H2140mm Godetxkn Ujpfx Afnsin -Weight: 1283 kg

Condition: used, Die holder, notching tool, punching tool, punch, punching die, punching punch, Giedoiqhh Ispfx Afnen -Manufacturer: Mubea, punching tool square Ø 52 mm -Type: Mubea 52 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 125 mm -Weight: 6,8 kg

Condition: good (used), Punch, punching machine, hole punch, eccentric punch -Manufacturer: Peddinghaus, hole punch -Type: 225B/45 Gijdek D Nt Depfx Afnjn -Pressure force: 45 tons. -Punching capacity: see photo of nameplate -Projection: 360 mm Accessories: incl. punching tool and 2nd table (see photos) -Dimensions: 1540/700/H1510 mm -Weight: 1410 kg