Used Wood Turning Lathe for sale (24,587)

Condition: used, SECOND-HAND OLEO PNEUMATIC LATHE FOR TURNING AND SANDING OF SMALL WOODEN ELEMENTS LOCATELLI MOD. OMK 300 - Control panel - Automatic loader - Maximum working length 300 mm - Min / max working diameter 8/80 mm - Working stations: * automatic loader Giedpfxornq Ris Admjl * turning with n. 2 gouges (roughing + finishing) * 1° shaped knife * 2° shaped knife * unloading

Condition: good (used), Semi-automatic wood lathe Maximum working length 1200 mm Maximum working diameter 180 mm Gisdpfstttp Rox Admsl

Condition: excellent (used), Year of construction: 2021, operating hours: 7,950 h, functionality: fully functional, Vertical Turning Center / Vertical Lathe Manufacturer: EMAG Model: VL6 (FANUC) Year of Manufacture: 2021 Operating Hours: approx. 7950 Total weight : 10,5T Main spindle 28,5 KW Power at 40/100% ED 41/28,5KW Torque at 40/100% ED 491/340 Nm Full power at spindle speed 800 rpm Max. speed 3100 rpm Slide Unit X, Z HP Turret Drive Unit for Driven Tools (C362) with internal coolant supply to the tool Max. speed: 9600 rpm Full power at 3000 rpm Torque at 100% ED 33/Nm/10,4 kW Torque at 40% ED 44/Nm/13,8 kW Torque at 10% ED 56/Nm/17,6 kW Tool holder unit for driven tools: 12 x BMT65 Component storage and transport system conveyor, O-Type (GO 240") carrier prism system for 10 components Workpiece height : max. 250 mm Workpiece weight: max. 40 kg Set (10 pcs) of carrier prisms for workpiece diameter: 150 - 300 mm Blow-off Device for Workpiece and Clamping Device (Pick-Up) Coolant Supply: 15 bar Coolant pump capacity: approx. 80 l/min at 15 bar Cooling unit (6.5 kW, water - air) Coolant double filter, manually switchable Filtering fineness 100 μm, with electric and mechanical contamination indicator Swarf conveyor, chain type - rear discharge Gsdpfx Aewzwu Isdmsil Hinged belt version: rear discharge Chip discharge height 1,100 mm (with integrated coolant tank, capacity approx. 500 l) Emulsion Mist Extraction: Extraction rate approx. 800 m³/h Rinsing gun Workpiece Measurement with Probe Probe blow-off Tool life monitoring (sister tool management) 3-Color Signal Tower Quick-Jaw changing chuck SMW autoblok KCNS-N400-128 max. = 3500 rpm Set of hard base jaws Set of soft top jaws Software Package Operating Manual / Maintenance Manual

Condition: excellent (used), Year of construction: 2013, Anno 2013 Specifiche tecniche : Passaggio barra mandrino principale diametro 42 Passaggio barra contro mandrino diametro 30 Gjdsvtm Tlepfx Admeil Corsa asse Z Contro mandrino mm 360 Corsa asse Z torretta superiore mm 235 Corsa asse Y torretta superiore mm 70 (+ - 35) Corsa asse X Contro mandrino mm 140 Torretta superiore con asse Y 8 posizioni Torretta per lavorazioni da ripresa contro mandrino 6 posizioni Numero di giri mandrino principale 6.000 Numero di giri contro mandrino 5.000 Numero di giri utensili motorizzati 5.000 CNC Fanuc 0 ì TF Nastro evacuazione particolari lavorati Kit porta utensili fissi + motorizzati Spingi barra IEMCA Boss 545/E

Condition: excellent (used), Genini Junior Pass-Through Lathe Minimum diameter 10mm Maximum diameter 30mm Granulation length 800mm Gjdpfev U Uh Tox Admjil Turning length max 60mm Turning diameter 30mm Spindle motor power 4kw Collets included with diameters 14,17,24,28,30mm

Condition: used, Year of construction: 1990, Killinger copy lathe with mechanical tracing Centre distance 1200/1500 mm Copying length 1100/1400 mm Centre height 250 mm Gisdpfxswuxpaj Admol Motor power 1.5 kW Manual feed Speed 2800/1580/870/670 rpm Space required 2080 x 750 x 1150 mm Weight 350 kg Year of manufacture 1990 Price 3000.-

Condition: excellent (used), For sale: Genini brand lathe in very good condition Gjdpfx Adexf Nyuomeil

Condition: used, Year of construction: 2005, functionality: fully functional, power: 45 kW (61.18 HP), input frequency: 50 Hz, The second-hand Twin Aces BRAVE-F1 model was manufactured in 2005 and is in perfect working condition. Its technical specifications are as follows: Serial No: B05046 Installed Power: 45 kW Voltage: 380V AC ±%10 Gedpfx Adev Hdlfemeil Frequency: 50/60 Hz

Condition: excellent (used), Year of construction: 2018, EMAG VL 3 DUO CNC Twin Spindle, Vertical Turret Lathe Mfd. 2018 S/N 1100619, EMAG CNC control, (2) 12-station turrets, Chip conveyor, Full automation system Hennig system Hours: 4,684 2 Machines Available Gsdpfxsu T Shvs Admsil 110612, (2) w/Hennig Mdl. 102783 chip conveyor, full automation system, 4,684 and 7,401 hours.

Condition: used, Year of construction: 2010, functionality: unexamined, feed length X-axis: 250 mm, feed length Z-axis: 500 mm, power: 40 kW (54.38 HP), spindle diameter: 300 mm, EMAG VSC 7 ( YEAR OF MANUFACTURING - 2010 ) - 01 NO & EMAG VL 05 ( YEAR OF MANUFACTURING - 2012 ) - 01 NO Giodpfox Rawdox Admsl

Condition: excellent (used), Genini Miniautomatic Pass-Through Lathe Turning machine from square timber Main spindle with a two-speed motor with a power of 4.9/5.9kw Hydraulic pump motor with a power of 1.5kw Maximum length of square timber 950mm Maximum turning length 120mm Maximum turning diameter 80mm Two supports with profiling knives Gedpfx Asv Hgctedmeil 1 front spindle for drilling or front profiling 1 roughing turning knife Machine weight approx. 1800kg

Condition: good (used), Year of construction: 2018, Max. machining diameter: 20 mm Max. turning length per chuck: 175 mm Outside diameter tools (number of tools): 6 Outside diameter tools size: 12 mm Inside diameter tools (number of tools): 4 Inside diameter tools sleeve size: ER 16 Inside diameter tools max drilling capacity: 10 mm Side live tools (number of tools): 4 Side live tools max speed: 6000 rpm Side live tools servo motor power: 1.4 kW Side live tools max drilling capacity: 8 mm Main spindle speed: 10000 rpm Main spindle motor power: 2.2 / 3.7 kW Controller: FANUC Oi - TF Giodpfxjwxb His Admsl Tank volume: 140 L Machine dimensions (L x W x H): 2 x 1.3 x 1.8 m Machine weight: 2100 kg

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25728, Equipped with: Gsdpfxew Iqume Admoil Hydraulic Unit Sinumerik 840D sl CNC Control Slim Line Operator Panel OP012 W/12 TFT-Color Display 19" Machine Control Panel 20 Tool ATC CAPTO C6 Multifunctional Tool Carrier For Turning and Driven Tools One Fixed Tool Unit Assembled To The Compound Slide W/Coolant Thru The Turning And Drilling Tools, Coolant For The Driven Spindle From The Outside Drilling Spindle Additional Drill Spindle For Orientation Chip Conveyor Coolant Equipment -Including piping and shut-off valve and flow control switch -To supply coolant to tools for coolant and flushing through the cutting tools -To supply coolant for flushing the work piece and chuck -To supply coolant for flushing the working area Paper Band Filter Immersion Cooler High Pressure Coolant Pump, 40 Bar Through Tools Flushing Pistol, Hand Held Air Cleaner - Mechanical Separation "Mist Collector" Tool Life Display Remote Diagnostics Signal Lamp Automatic Door For Loading W/Shuttle Load and Unload Shuttle Swivel Loader Automation Cell Tuned for Part Pallet Conveyor For 20 Raw And Finished Parts Pallets Pallets Designed for Part 596500 Handling System SPC Station (Maximum O 270 mm, Maximum H 150 mm, Maximum Wt. 12 kg) NIO Station (Closing forward leading gravity) Skiving Software (Hardware: Software and user surfaces for skiving technology) Measuring Probe (For measuring diameters and length of the workpiece in the machine) Measuring Software for Teeth Measuring (MDK and Flank Line, Software and User) Measuring Program (Automatically measuring program for measure the position of the two gears to each other, after using sister tools) SPC (Every X workpieces the MDK needs to be measured) Tool Changer (Precut, measurer and final cut) Skiving Tool Identification (Hardware, software for the identification of the skiving tool after tool change) Hydraulic Diagrams Coolant Diagrams Lubrication Diagrams Electrical Wiring Diagrams Hardcopy of Diagrams CF Certificates Specifications: Workpiece Spindle: -Speed: 0-7000 l/min -Power: 55,2 - 59,7 kW Tool: Capco C6 Tool Spindle: -Speed: 0-6000 l/min -Power: 29 - 41 kW Machine Weight, Floor Space and Voltage Supply: -Operating Voltage: 400V, 3 Phases, 50 Hz -Control Voltage: 24 V -Lighting Voltage: 240 V, 50 Hz -Floor Space: 2,700 x 2,600 mm -Height: 4,000 mm -Total Weight, Approximate: 16,000 kg Longitudinal, Z-Axis: -Stroke: 800 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Transverse, X-Axis: -Stroke: 900 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Tool Spindle, B-Axis: -Range: -20 / +90 Degree Y-Axis for Spindle Unit: -Stroke: 200 mm -Rapid Rate: 12 m/min -Feed Force: 6 kN C-Axis Main Spindle: -Positioning Accurace: 9" Multifunctional Tool Carrier: -Power: 29 kW at 100% ED -Power: 41 kW at 44% ED -Torque: 141 Nm at 100% ED -Torque: 212 Nm at 44% ED -Spindle Speed: 0-6000 min-1 -B-Axis for Stepless Motion in a Range Of: -20/+90 Degree Tool Magazine: -Maximum Tool Diameter: 100 mm -Approximate Tool Length: 300 mm -Approximate Tool Weight: 12 kg Swivel Loader: -Maximum Workpiece Diameter: 270 mm -Height: 150 mm -Weight: 16 kg

Condition: excellent (used), Year of construction: 2010, operating hours: 0 h, functionality: fully functional, Hyundai WIA Model : SKT21VM Chuck Size: 8 inch Fanuc 21iTB Max Work: 350 x 150 X Axis: 1255 Z Axis: 320 12 Tool Turret Godjxyvx Hepfx Admjil unused in mass production condition (displayed only)

Condition: excellent (used), Year of construction: 2016, Tornos MultiSwiss 6x16 CNC Multi-Spindle Screw Machine Mfd. 2016 6 Spindles Diameter:16mm Fanuc Control Equipped as pictured Run time: 42,689 hrs Power on: 64,668 hrs Standard tornos bar feed (5ft) 6 Motorspindles 5,5 kW max. speed 8’000 RPM Spindle capacity 14 mm, Z 50mm stroke (max. parts 40mm). 6 slides X 40mm stroke 1 counter-operation slide, 75mm stroke. Counter spindle with integrated motor 6 kW Max. speed 8’000 RPM, 150mm stroke. Giodswa D Tuepfx Admjl Numeric control Fanuc 30i Integrated PC with screen 17” Programming system TB DECO (DCS version) (requires 3001) contact us for more details

Condition: excellent (used), Intorex TZ 1300 automatic lathe with grinder Gisdpfx Adjv E Nzvemjl Working length 1300mm Machine available on request

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 14974, Tornos MultiSwiss 6x16  CNC Multi-Spindle Screw Machine Mfd. 2019 6 Motorspindles  5,5 kW max. speed 8’000 RPM Spindle capacity 16 mm, Z 50mm stroke (max. parts 40mm). 6 slides X 40mm stroke 1 counter-operation slide, 75mm stroke. Counter spindle with integrated motor 6 kW Gedpfx Adev S H Uyomjil Max. speed 8’000 RPM, 150mm stroke. Numeric control Fanuc 30i Integrated PC with screen 17” Programming system TB DECO (DCS version) (requires 3003) contact us for more details

Condition: excellent (used), Year of construction: 2005, Schaublin 102N-VM-CF high precision Swiss lathe Year: 2005 max. admitted diameter over the bed 200 mm max. admitted diameter over the slides 120 mm Height of centers 102 mm Distance between centers 450 mm Bed length 1000 mm Bed height 168 mm Power 4.2 KW Spindle speed 100 - 3000 RPM Spindle W25 Transverse stroke, X axis 100 mm Resolution, X axis (radius) 0,01 mm Longitudinal stroke, Z axis 90 mm Resolution, X axis (radius) 0,01 mm Lead screw - 8 longitudinal feeds - Larger feeds possible when using the thread control for turning Max. cross section of tool shank (Multifix system) 10x10 mm Bar holder (MULTIFIX system) diameter 20 mm Height and side-adjustable tailstock: Internal taper of the sleeve Mk2 Spindle OD 30 mm Spindle stroke 80 mm Coolant tank capacity 23 L Electrical power supply voltage 400 V Overall dimensions: length x depth x height: 1500 x 510 x 1550 mm Accessories / options: - ACU-RITE digital readout unit, 3 axis X-Z-Z1 Gjdpfx Adjw N Rh Aemsil X resolution 0.001[mm] Z resolution 0.005[mm] Z1 resolution 0.005[mm] - Coolant system - Rear sheetmetal guard - Double Start/Stop pedal and spindle rotation direction inversion - Schaublin W25 collet set - Cast iron chuck W25 Ø110[mm] with jaws - Quick-change toolholder turret MULTIFIX-A with holders - Driving system for auxiliary equipment with BELT adjustable and swivelling belt-tensioning attachment drive device complete with motor belt Ø6x2’500[mm] - Tailstock - etc... Under power in our warehouse.

Condition: used, Schaublin 102-N80 Swiss precision lathe Technical details: Center height: 102mm Distance between centers: 450 mm Spindle bore: 32mm reduction gear left.- Right running 2-stage drive Vario Speed: 270-3000 U / min knee circuit Turning diameter over bed: 200 mm Spindle nose: W20 Tailstock: MK 2 Dimension (LxWxH): approx 140x56x123 cm Weight: approx 550 kg Accessories/options: - 3-jaw chuck with jaws - 4-jaw chuck with jaws Godpsxxavgjfx Admeil - tool holders - Schaublin collets from 0,5mm Under power in our warehouse.

Condition: excellent (used), functionality: fully functional, Locatelli Ariete 3 Automatic Lathe Max/min billet length: 1000/200 mm Max/min billet cross-section: 85×85/20x20 mm Maximum workpiece length: 120 mm with hole, 150 mm without hole Automatic material feeder Complete DTR documentation Main motor: 3/4 kW Two spindle speeds: 2500/3600 rpm Oil pump motor: 2.2 kW Working pressure: 6–8 bar Gisdpfxox Thyls Admsl

Condition: good (used), Wood lathe Length: 1750 mm Giedpfxei Akv So Admol Motor power: 3 KW Voltage: 380 Volt Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 112902, Title: Intorex CNI 1500 CNC Control Lathe - 2015 Model Description: Experience precision engineering at its finest with the Intorex CNI 1500 CNC Control Lathe, a powerhouse of machining. Manufactured in 2015, this machine embodies reliability, accuracy, and efficiency, making it an ideal addition to any workshop or manufacturing facility. Key Features: Year of Manufacture: 2015 Brand: Intorex Model: CNI 1500 Control: CNC Control Max. Turning Diameter: 300mm Diameter Max. Turning Length: 1500mm Inc. Drawing and programming Software IntorEDIT (easy to use) Additional Features: Adjustable Tailstock (12 & 18mm), Round steady (90mm Dia & 140mm Dia), 2 pneumatic centerers Godpfx Ader Tiukemeil to facilitate the loading of the pieces Applications: Ideal for precision turning operations in Woodworking / Joinery Reason for Selling: Upgrading to newer equipment. Comes with rolling cabinet for accessories and tooling

Condition: like new (used), DEMONSTRATION MACHINE For sale: MIDI2 Plus lathe demonstration machine with a center height of 178 mm, including PRO DDMIDI-105 machine stand! The lathe has only been used briefly for demonstration purposes at Hödnerhof. Therefore, it is considered as new and comes with full warranty / guarantee. Gjdpfju Szlzsx Admjil Technical Specifications: - Center height approx. 178 mm / turning diameter 355 mm - Distance between centers approx. 400 mm (expandable with optional bed extensions) - Speed ranges: 60 – 1,000 / 150 – 1,900 / 350 – 3,700 rpm - Spindle thread M33 x 3.5 (taper MK2) with ASR (Euro) anti-rotation safety groove* - Tailstock with interchangeable quill, 100 mm MK2, trapezoidal thread and measuring scale! (Optional: Interchangeable quill with ER25 collet system for drilling) - Motor 1 HP (230 V) with high-quality frequency inverter - Weight approx. 53 kg The machine is located in Kuchl, A-5431. Subject to prior sale! (No shipping possible) Related terms: wood lathe, turning machine, lathe, woodturning, wood turning tools, woodturning, machine Reference: DDMIDI2-PLUS-VH

Condition: excellent (used), Year of construction: 2013, Locatelli Ariete 3 Automatic Lathe Maximum/minimum prism length: 1000/200 mm Maximum/minimum prism dimensions: 85×85/20x20 mm Maximum workpiece length: 120 mm with bore, 150 mm without bore Automatic material feeder Main motor power: 3/4 kW Two spindle speeds: 2500/3600 rpm Oil pump motor: 2.2 kW Gedpjx Tck Eofx Admsil Operating pressure: 6-8 bar + many accessories. Units: roughing, cleaning, drilling, parting-off knife

Condition: excellent (used), functionality: fully functional, Automatic lathe Locatelli Ariete 3 Length of the cant max/min 1000/200mm Dimensions of the cant max/min 85×85/20x20mm Maximum length of the processed material 120mm with a hole 150mm without a hole Automatic material feeder CE certificate Complete DTR documentation Gijdpfx Adjx Thw Demel Main engine with a power of 3/4kw Two spindle speeds 2500/3600rpm Oil pump engine 2.2kw Working pressure 6-8bar