Used Wood Shavings Press for sale (18,929)

Condition: used, Year of construction: 2017, Automatic cold press Manufacturer: CMB Type: PFR-CCL Year of manufacture: 2017 Technical data: Motorized loading table 3,500 x 1,600 mm for manual assembly of the plates and automatic loading into the press on the 1,600 mm side. Structure made of welded steel profiles. Devices for adjusting the working height to compensate for unevenness in the floor. Steel rollers. Foot switch. PRESS Plate size: 5,500 x 1,600 mm Loading side: 1,700 mm Stroke: from top to bottom Opening: 450 mm Cold press The plates are made of steel sheet and attached to a steel frame structure. Maximum pressing force: 160 tons. Specific pressure (on 100% of the area): 1.82 kg/cm2 Specific pressure (on 80% of the area): 2.27 kg/cm2 Pressure cylinder: 12 x 80 mm Auxiliary cylinders: 6 x 50/30 mm Power supply: 400 Volt EU/50 Hz/3 PH. + G AUTOMATIC LOADING and UNLOADING of the plates on the lower plate, on the 3,500 mm side. The transport is carried out via a motorized MYLAR belt. The belt is activated by 2 rollers, one of which is located at the entrance and one at the exit of the press. The rollers are driven by a motor with a chain that slides on special guides. The Mylar belt rotates around the lower plate, which rests on special side supports. The belt rotates on 2 rollers, which are located at the entrance and exit of the press. The ends of the MYLAR belt are attached to special rods with devices for tensioning the MYLAR. The upper plate is covered with a Mylar film. The press plates consist of thick steel sheets that are welded to the frame structure. HYDRAULIC UNIT with pump, oil tank and valves for operating the pressure cylinders and auxiliary cylinders that move the upper plate. The hydraulic control unit is located in the upper part of the press to facilitate maintenance. CONTROL PANEL with buttons and switches. Pressure control manometer on the front of the press. UNLOADING MOTORIZED ROLLER TABLE 2,000 x 1,600 mm The unloading table is located at the exit of the press for manual unloading of the pressed plates. Exit side from the press: 1,600 mm. Note: The loading table of the press with the dimensions 3,500 x 1,600 and the unloading table with the dimensions 2,000 x 1,600 are shorter than the press table with the dimensions 5,500 x 1,600, as the press was installed in a line. Note: Kedpfezuzw Djx Adqodr The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1996, Continuous press Manufacturer: OTT Type: 300-K-D0 Ksdpfx Ajzuzwwjdqedr Year of manufacture: 1996 Technical data Plate dimensions: 2550 x 1350 mm Hot water heating 6 pressure cylinders Total pressing force: 135 t Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: used, Year of construction: 2007, Lamination press Manufacturer: Dimter Type: PROFIPRESS L2500 Year of manufacture: 2007 Technical data Wood dimensions to be processed Wood width, panels: 30 - 150 mm Wood thickness: 11 - 60 mm Wood inlet length: 800 - 2500 mm Panel widths, variable: max. 1300 mm Specific pressing pressure for cross-sections of 2500 x 60 mm: up to 1.6 N/mm2 The pressing surface per press cycle must not be smaller than 100 cm2 Filling width of the press per cycle: min. 650 mm / max. 1300 mm Max. filling area of the press per cycle: 3.25 m2 (The max. usable press width depends on the widths of the individual lamellas.) Wood type Softwood/hardwood Press without options Kdedpfx Adezuzwqoqjr Electrical connection, press: 7 kW Electrical connection, 40 kW generator: 56 kW Operating voltage: approx. 400 Volt / 50 Hz (C/s) Collection table extended to 3700 x 1300 mm, with stainless steel wood support Motor-driven multi-function slider Lamination press Profipress L 2500 Press bed area approx. 2500 x 1300 mm Sturdy base frame with lower press table made of stainless steel as a grounding electrode Quick-change stop guide sets for panel thicknesses of 19 - 40 mm, which can be hydraulically adjusted to the current filling width Hydraulic special pressure elements ensure uniform pressure distribution over the entire joint length and compensate for tolerances In multi-lane operation, filling widths may vary by a maximum of 15 mm Upper pressure plate with hydraulic drive generates high vertical pressing pressure for minimal displacement Integrated hydraulic unit for generating pressing force and driving the hydraulic motors Control cabinet and control panel Protective cladding Additional individual pressure elements from above Automatic gluing station with precision gluing head Infeed for different widths Camera Washing and rinsing device for gluing head Modem incl. software for online connection Note: The technical data and descriptions are copies of the order confirmation from that time. The information is provided for informational purposes only and is non-binding.

Condition: used, Year of construction: 1998, Continuous body press Manufacturer: LIGMATECH TYPE: MPP 15 Year of manufacture: 1998 The MPP 15 is a flexible press for batch-related production without setup times. The MPP 15 can be used individually or in various combinations in an assembly line. The pressing forces are applied pneumatically. The separately adjustable vertical and horizontal pressure allows for pressing both horizontal and vertical bodies. The vertical forces are transmitted through a plate, while the horizontal forces act on the body via press cheeks. The position of the center press cheeks can be adjusted using adjustable stops, allowing for different heights of bottoms and sides. During the infeed process, the body is measured photoelectrically, which automatically positions the horizontal pressure bar. Technical data: Body dimensions: Length: min. 300 mm / max. 2300 mm Height: min. 300 mm / max. 1220 mm Kodpfozuzv Tsx Adqedr Depth: max. 600/800/1000 mm (depending on the press type) Pressing pressure: vertical max. 17 kN horizontal max. 16 kN Working height: 500 mm Transport speed: min. 8 m/min. / max. 37 m/min. Pressing time: selectable up to 999 s Operating voltage: 400 V, 50 Hz Control voltage: 24 V DC (according to VDE) Required air pressure: 5...8 bar Air consumption: 120 NL/cycle Total connected load: 3 kW Weight: approx. 4 tons Required room height: 3000 mm Extended infeed belt as a staging area Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2000, Corrugated board press Manufacturer: Hüttenhölscher Year of manufacture: 2000 Technical data Voltage: 400 V Current: 32 A Frequency: 50 Hz Compressed air: 6 bar Note: Kdodpfjzuzvmex Adqjr The technical data and descriptions are a transcript of the order confirmation from that time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2001, Short-cycle pressing line Manufacturer: Wemhöner Type: KT-F-1E Year of manufacture: 2001 Technical data - Pressing area: 5,750 mm x 2,200 mm - Operating side: left - Plate dimensions: Length: 2 x 2,600 mm - 2 x 2,620 mm Width: 2,070 mm Thickness: 6 mm - 40 mm - Pressing pressure: approx. 40 kg/cm² Note: Upon request, the complete layout plan of the system can be sent. Kdsdpezuzi Tofx Adqer Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: used, Year of construction: 1998, - Lengths: 1,800 - 2,300 mm - Widths: 500 - 1,300 mm - Thicknesses: 35 / 40 / 44 mm Door pressing system Manufacturer: Wild Year of manufacture: 1998 For door dimensions: - Lengths: 1,800 - 2,300 mm - Widths: 500 - 1,300 mm - Thicknesses: 35 / 40 / 44 mm Consisting of the following sections: 1. Continuous door panel gluing with frame assembly station / 2. Pressing line with hardboard facing station Section 1 consists of: - Gantry loading system - Angle transfer with longitudinal and cross saws - Loading and feeding of the longitudinal and transverse frame parts from magazines - Longitudinal cutting station for the longitudinal frame parts - Connecting station of the frame parts with the door panel core. With clamping devices - Conveyor belt angle transfer with shuttle transfer of the door panel cores onto the glued hardboard Section 2 consists of: - Loading of the hardboard - Brush cleaning machine Kedszuzgrspfx Adqjdr - Hardener application machine from below - Glue application machine from below - Roller conveyor - Angle transfer for the lower hardboard - Vacuum reversing device for the upper hardboard - Automatic facing station for hardboard and door panel cores - 2 door presses, each with 2 x 4 pressing stations, arranged parallel to each other - Both presses are loaded at the infeed with 1 shuttle loading basket - Both presses are unloaded at the outfeed with 1 shuttle unloading basket - Angle transfer to the infeed into a hedgehog buffer - Angle transfer at the outfeed of the hedgehog buffer and feeding to the stacking station - One-sided vacuum stacking with protective plate space Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, PLEASE READ CAREFULLY!!! THIS OFFER IS EXCLUSIVELY FOR EUROPEAN END CUSTOMERS, AND THE FIRST INQUIRY MUST INCLUDE COMPLETE CONTACT INFORMATION. THANK YOU. The forging line consists of a hydraulic 1500-ton forging press, an induction unit with 1200 kW, and a robot with a load capacity of 300 kg. So far, prototypes have been manufactured; however, the line was actually designed for series production, which has not yet taken place. The line was built and installed in 2023. The technical specifications are as follows: Hydraulic press 1500 tons (year of manufacture 2023) SIEMENS control system - Pressing force: 1500 tons - Retraction force: 120 tons - Downward stroke: 300 mm/s - Pressing stroke: 100 mm/s Kdodpezvnpiofx Adqer - Upward stroke: 300 mm/s - Installation height: 3,000 mm - Ram stroke: 1,500 mm (!) - Ram size: 1,600 x 1,600 mm - Table size: 1,600 x 1,600 mm - Ejection force / 1 position: 40 tons - Stroke: 600 mm - Ejection speed: 250 mm/s - Return speed: 250 mm/s - Stroke: 400 + 400 mm - Traverse speed: 200 mm/s - Ram positions: 3 positions Including a 1200 kW induction unit (year of manufacture 2023) MITSUBISHI control system - 1200 kW / 450 Hz induction unit for billets - Coil size: Ø 215 / Ø 150 mm, two sets of coils - Material feeding system Including a Kawasaki robot (6 axes) – Model: ZX300S-D- (year of manufacture 2023) - Max. load capacity: 300 kg - Max. reach: 2500 mm Sample images of the machines are attached.

Condition: used, Year of construction: 2001, - Cutting length: 5800 mm - Cutting width: 2 x 2200 mm - Max. cutting height: 100 mm Panel dividing and solid wood saw Manufacturer: PANHANS Type: EURO 32 Year of manufacture: 2001 Dimensions: - Cutting length: 5800 mm - Cutting width: 2 x 2200 mm - Max. cutting height: 100 mm Kdsdezuy Egjpfx Adqsr Machine attachments: - Roller table at the rear: 3982 mm - Support beam at the rear: 9 pieces, 40 x 4056 mm - Air cushion table at the front: 2 pieces, 600 x 1800 mm, adjustable Air cushion table at the front for miter cutting device: 1 piece, 600 x 1400 mm - Air cushion miter table: 600 x 1800 mm, left - Miter ruler: up to 2060 mm - Clamps: 9 pieces, adjustable - Stop jaws: 2 pieces, adjustable - Side pressure: 65-1365 mm, stepless Special accessories: automatic miter cutting device - Special version: hydraulic lifting table with roller conveyor, infeed roller conveyor, 4 length edgers, 4 panel extractors Note: The technical data and descriptions are copies of the order confirmation from that time. The information is provided for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2021, machine/vehicle number: 2.102.061, functionality: fully functional, pressing force: 135 t, stroke length: 210 mm, throat depth: 410 mm, controller model: Cybelec CybTouch 8W, working width: 3,100 mm, TECHNICAL DETAILS Press force: 135 t Max. working width: 3,100 mm Frame spacing: 2,500 mm Overhang: 410 mm Rear gauge depth: 750 mm Max. stroke: 210 mm Number of axes: 4 (Y1, Y2, X, R) MACHINE DETAILS Control system: Cybelec CybTouch 8W Power: 11 kW Tool holder type: European-style Punch holder: Standard Kedpfxszrmu Ns Adqjdr Dimensions & Weight Dimensions (L x W x H): 3,720 × 2,300 × 2,750 mm Shipping weight: 7,700 kg Shipping packages: 1 EQUIPMENT Tools CE marking Documentation

Condition: ready for operation (used), functionality: fully functional, pressing force: 70 t, table width: 495 mm, table length: 650 mm, TECHNICAL DETAILS Pressing force: 70 t Stroke, min.: 10 mm Stroke, max.: 90 mm Table length: 650 mm Table width: 495 mm Kdjdpfx Aozrmm Sedqer Column width: 400 mm MACHINE DETAILS Control system: CNC Dimensions & Weight Dimensions (L x W x H): 2,650 x 1,600 x 3,350 mm Dry weight: 9,000 kg Shipping packages: 4 pcs. EQUIPMENT Documentation

Condition: used, Year of construction: 2020, total length: 2,450 mm, total width: 1,900 mm, total height: 2,140 mm, Weight: 5.500 kg - Year: 2020 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Drive system: CNC Kdsdpfxszr Inwe Adqjr - Control system brand: Delem - Control system type: DA-41s - Power [kW]: 4.0 - Number of axes [pcs]: 4: Y1+Y2+X+R - Press force [ton]: 40 - Max. working width [mm]: 2000 - Column gap [mm]: 1800 - Throat depth [mm]: 200 - Backgauge depth [mm]: 750 - Max. stroke [mm]: 100 - Crowning system: None - Punch holder: Quick-release - Tool holder type: European-style - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 2450mm x 1900mm x 2140mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1981, operating hours: 376 h, functionality: fully functional, machine/vehicle number: 01031, total height: 3,200 mm, total width: 1,900 mm, total length: 2,500 mm, table width: 570 mm, table length: 670 mm, overall weight: 10,000 kg, clamping force: 400 kN, input frequency: 50 Hz, input current: 25 A, power: 7.5 kW (10.20 HP), REIS TUS 600 K Coating Press - Operating voltage: 380/260 V Attention: The item must be picked up between September 8 and September 10, 2026, on a date to be confirmed. FCA D-63128 Dietzenbach - loaded onto a truck. Kjdpfxezlfb Ij Adqodr

Condition: good (used), Year of construction: 2018, operating hours: 40,350 h, Baling press Presona LP 85 VH2, year of manufacture 2018 Technical data: Manufacturer Presona Sweden Type LP 85 VH2 Year of manufacture 2018 Drive power 2 x 45 kW Operating hours 40,350 Effective operating hours approx. 22,000 Pre-compression force 28 t Main compression force 85 t Feed opening 1500 x 1100 mm Bale dimensions 750 x 1100 mm Bale weight 450 - 650 kg Theoretical volumetric capacity: 1200 m³/h Throughput capacity at 30-100 kg/m³: 13-30 t/h Tying 5-strand vertical, (3-strand horizontal) Oil tank volume 2000 L Transport dimensions of press 10400 x 2400 x 2800 mm (LxWxH) Weight approx. 27000 kg Materials: Paper, cardboard, PET bottles, films, light waste. Note: The press is in good condition. It has been dismantled from ongoing operation. The following work has been carried out by us: New wear plates (Hardox) in the press channel Seals completely replaced on the main cylinder Kodpfx Adozulknjqedr Oil filter changed Vertical tying mechanism overhauled and made functional The horizontal tying mechanism is currently not functional. The technical documentation is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any possible errors. The offer is subject to change, prior sale is reserved, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment ex works, without warranty.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, type of input current: three-phase, A very good machine with the benefit of the infeed table and outfeed exit table, which saves significantly on labour. Kdsdpfezifpgox Adqor

Condition: ready for operation (used), Year of construction: 2008, pressing force: 66 t, stroke length: 200 mm, throat depth: 400 mm, total width: 2,650 mm, total height: 2,400 mm, overall weight: 5,800 kg, Equipment: CE marking, Hydraulic press brake Manufacturer: TRUMPF, Type: TruBend 3066 Year of manufacture: 2008 Technical data Manufacturer: TRUMPF Type: TruBend 3066 Year of manufacture: 2008 Bending length: 2040 mm Kdedpfxszu Taws Adqjr Press force: 66 t Free daylight between uprights: 2364 mm Throat depth: 400 mm Stroke: 200 mm Y-axis rapid traverse speed: max. 200 mm/s Y-axis working speed: max. 15 mm/s Drive power: 17 kW Dimensions: L 2.65 x W 1.85 x H 2.40 m Weight: 5650 kg Equipment - Electro-hydraulic upper drive - Block hydraulics - Controlled axes: Y1, Y2, X, R, Z1, Z2 - Automatic upper and lower tool clamping - Self-adjusting crowning system - Control system: Delem - Light curtain at the front for laser safety - Foot switch - Tool package consists of: Upper tool, straight, 28°, R1, 2000 mm, segmented Lower tool, V10, 84°, H100, 2000 mm, segmented All information is subject to change without notice.

Condition: used, Year of construction: 2016, - Year: 2016 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Kdsdpozry S Ujfx Adqjr Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1967, total length: 2,000 mm, total width: 1,750 mm, total height: 2,850 mm, Colour: Grey Empty weight: 6.000 kg - Year: 1967 - Documentation available: No - CE certificate present: No - Serial number: 1166 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 100 - Max. stroke [mm]: 250 - Table length [mm]: 740 - Table width [mm]: 500 - Ram length [mm]: 250 - Throat depth [mm]: 350 - Transport dimensions: 2000mm x 1750mm x 2850mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Ksdpfx Adozry Icoqsdr Lukas van Rossum

Condition: used, Year of construction: 2023, total length: 1,400 mm, total width: 600 mm, total height: 2,180 mm, Colour: Blue Empty weight: 280 kg - Year: 2023 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: SA021 - Drive system: Conventional - Press model: Workshop press - Press configuration: Single-acting - Press force [ton]: 30 - Min. stroke [mm]: 0 - Max. stroke [mm]: 190 - Table length [mm]: 695 - Table width [mm]: 60 - Ram width [mm]: 60 - Max. opening height [mm]: 1000 - Height adjustment [mm]: 830 - Transport dimensions: 1400mm x 600mm x 2180mm (l x w x h) - Transport weight [kg]: 280kg - Transport packages [pcs.]: 1 Financial information Ksdozry H Eopfx Adqsdr VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 1,250 mm, total width: 2,100 mm, total height: 3,300 mm, Colour: Green Empty weight: 7.000 kg Price: On request - Documentation available: No - CE certificate present: No - Drive system: Conventional - Press model: C-Frame press - Press configuration: Single-acting - Press force [ton]: 100 - Min. stroke [mm]: 20 - Max. stroke [mm]: 140 - Table length [mm]: 580 - Table width [mm]: 780 - Ram width [mm]: 400 - Throat depth [mm]: 315 - Max. opening height [mm]: 560 - Height adjustment [mm]: 70 - Pressing speed [mm/s]: 360 - Transport dimensions: 1250mm x 2100mm x 3300mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Kdjdpozrxr Tjfx Adqor Lukas van Rossum

Condition: used, Year of construction: 2007, total length: 3,550 mm, total width: 1,800 mm, total height: 2,800 mm, Colour: Grey Weight: 10.000 kg Kodezrxftspfx Adqedr - Year: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 11520 - Drive system: CNC - Control system brand: Baykal - Control system type: EC4-CNC - Power [kW]: 11.0 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 150 - Max. working width [mm]: 3100 - Column gap [mm]: 2550 - Max. stroke [mm]: 260 - Crowning system: CNC-controlled - Punch holder: Quick-release - Tool holder type: European-style - Transport dimensions: 3550mm x 1800mm x 2800mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1964, total length: 2,100 mm, total width: 1,500 mm, total height: 1,850 mm, Colour: Green Kedpfxszc Irre Adqjdr Weight: 2.500 kg - Year: 1964 - Documentation available: No - CE certificate present: No - Serial number: 13120 - Drive system: Conventional - Number of axes [pcs]: 1: Y1 - Press force [ton]: 50 - Max. working width [mm]: 2000 - Backgauge depth [mm]: 0 - Punch holder: Fixed - Tool holder type: European-style - Tools included: Yes - Transport dimensions: 2100mm x 1500mm x 1850mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2001, operating hours: 2,500 h, total length: 3,540 mm, total width: 1,500 mm, total height: 2,330 mm, Colour: Grey Weight: 8.230 kg Ksdey Thmxspfx Adqjdr - Year: 2001 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 5356 - Operating hours: 2500 - Drive system: Conventional - Power [kW]: 11.0 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 160 - Max. working width [mm]: 3100 - Column gap [mm]: 2500 - Backgauge depth [mm]: 750 - Max. stroke [mm]: 200 - Crowning system: None - Punch holder: Standard - Tool holder type: European-style - Tools included: Yes - Transport dimensions: 3540mm x 1500mm x 2330mm (l x w x h) - Transport weight [kg]: 8230kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1969, functionality: limited functionality, control type: manual, actuation type: electric, total height: 2,000 mm, total length: 1,300 mm, total width: 900 mm, overall weight: 450 kg, table length: 600 mm, table width: 600 mm, Bandsaw from Mössner - Type SM 420 Vertical bandsaw MÖSSNER SM 420 A, year of manufacture 1969. Description: - Factory number: 22600-77/14 - with stepless feed - bandsaw welding device IDEAL - machine light - table size approx.: 60cm x 60cm - table adjustable in inclination! - band dimensions: length: 316cm - 326cm max. - overhang approx.: 40cm - space requirement: W x D x H - 1.30m x 0.9m x 2.0m - weight: approx. 560kg Used, with signs of wear! Inspection possible at any time. Machine is disconnected, standing on a pallet and secured with a tension strap. The machine can no longer be switched on, probably a minor problem. Kedjzc Hwtspfx Adqsdr Private sale - without guarantee or warranty.

Condition: ready for operation (used), Year of construction: 2009, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2009 Pressing force: 532 kN Voltage: 400 V Max. bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening: 119.5 x 65 cm Condition: very good! Kedpszuxv Dofx Adqsdr Video of machine in operation available on request.