Used Wood Copy Lathe for sale (12,254)

Condition: ready for operation (used), Year of construction: 1985, Immediately available, free of encumbrances: L & Z lathe, Elliott Type Concord 460 Tjdpfe Aa Ih Rjx Akied Year of manufacture 1985 Swing over bed 550 mm Swing over cross slide 310 mm Turning length 1000 mm Spindle bore 71 mm Drive power 7.5 kW Spindle speeds 10 – 1000 rpm Coolant system Chuck Tool holder with inserts Weight 2.5 tons Price: EUR 1,750.00 plus VAT, ex works.

Condition: ready for operation (used), Year of construction: 1984, Deckel Copy Milling Machine Model KF 3 S Year of manufacture: 1984 Table surfaces: 600 x 555 / 620 x 750 mm Y-axis travel: 150 mm Z-axis stroke: 380 mm X-axis stroke: 150 mm Drive: 3 kW Tedpfxs Aa Ilij Akisd Roughing spindle Finishing spindle Locking arm Control lever with cable Tracing stylus holder Collets Weight: 2400 kg Price: EUR 2,000—plus VAT, ex works

Condition: ready for operation (used), Year of construction: 1990, L & Z Lathe AFM TUG 40 Type TUG 40 Year of manufacture 1990 Center height 200 mm Diameter over slide 280 mm Turning length 1500 mm Drive power 5.5 kW Spindle speeds 18 - 1600 rpm Spindle bore 52 mm Chuck, Lynette, steel tool holder Multifix with inserts Todpfe Aa Im Hox Akied Price: Euro 2,250.00 plus VAT, ex works.

Condition: ready for operation (used), Year of construction: 1998, spindle bore: 140 mm, overall weight: 10,000 kg, CNC Fagor control system Tedpfj Aa Nc Aex Akijd 4-jaw chuck, 1200 mm 40 kW motor 2000 x 1300 mm capacity 550 mm steady rest Weight: 10,000 kg

Condition: used, Year of construction: 2006, controller manufacturer: Siemens, controller model: 840D - Powerline, _____ Description: Year of manuf. : 2006 Control : Siemens 840D - Powerline Turning diam. : 140 mm Turning length : 480 mm Mainspindle: Technology:Belt-driven spindle Speed:6.300 rpm Power (max.):10 kW Torque (max.):78 Nm C-Axis:0,001° Barcapacity:45 mm Workpiececlamping:Collet chuck, Hainbuch Spanntop nova Kombi Axfix Gr. 65 Subspindle: Technology:Belt-driven spindle Speed:7.000 rpm Power (max.):10 kW Torque (max.):45 Nm C-Axis:0,001° Workpiececlamping:3-Jaw chuck, Röhm KFD-HS 130-3 Movement in Z:510 mm Rapid travers in Z:24 m/min Toolcarrier I (X/Z): Technology:Turret with 12 stations Taper:VDI25 Tooldrive:6.000 rpm, 7,5 kW, 12 Nm Movement in X/Z:160/510 mm Rapid travers in X/Z:20/24 m/min Toolcarrier II (X): Technology:Turret with 12 stations Taper:VDI25 Tooldrive:6.000 rpm, 7,5 kW, 12 Nm Movement in X:140 mm Todj Aa Hm Espfx Akied Rapid travers in X:20 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Cooling pumps with Highpressure, 14 bar Raw materialfeed:Bar loader, EMCO Top Load 8-45 Finishpart removal:Part catcher with conveyor belt Extraction:Interface mechanical prepared Further Equipment:Rinsing pistol Further Accessory:Misc. used static and driven Toolholder

Condition: used, Year of construction: 1972, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Manufacturer: PBR Type: TM 450/2000 Machine Type: Precision draw and feed spindle lathe Machine Weight: approx. 7.9 t Working Area Turning diameter over bed: 980 mm Turning diameter over carriage: 600 mm Turning length: 2,200 mm Turning diameter in the pit: 1,200 mm Pit length: 450 mm Spindle Spindle bore: 150 mm Speed stages: 24 Speed range: 8–800 rpm Axes and Travels X-axis: 2,000 mm X²-axis: 350 mm Y-axis: 500 mm Feeds Feed stages: 108 Longitudinal feed: 0.032–15.2 mm/rev Cross feed: 0.016–7.6 mm/rev Thread Cutting Number of thread pitches: 398 Metric thread pitch: 0.5–224 mm Metric thread pitch: 0.25–112 mm Imperial thread pitch: 56–1/8 TPI Diametral Pitch: 112–1/4 D.P. Tailstock Arbor support: MK 6 Arbor travel: 380 mm Tedpo Aa Azljfx Akiod Electrical Data Voltage: 380 V Frequency: 50 Hz Total power requirement: 25 hp Dimensions Footprint: approx. 4.4 × 1.8 × 1.7 m EQUIPMENT Original Forkardt 3-jaw chuck, 500 mm Hardened and ground bed guides Rapid traverse for longitudinal and cross feeds Spindle brake Original Sauter hydraulics with external oil supply Original Ideal tool holder Faceplate with 4 independent jaws Coolant system Magnetic clutch Automatic longitudinal stops Cross stop Thread dial Reducing sleeve 2 fixed centers Fixed steady rest Swiveling Staudacher spindle guard with safety switch 2 emergency stop buttons Main switch Chip collector Workpiece lighting Machine-mounted control cabinet

Condition: used, Year of construction: 2007, turning diameter 350 mm turning length 200 till 1040 mm Tedpfx Ae Aa A Nvekijd control OSP-P200L weight of the machine ca. 11000 kg

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 180 mm turning dia. over face-slide: 75 mm turning length: 325 mm facing movement (x-axis): 56 mm longitudinal traverse (z-axis): 176 mm control: FANUC 21T revolution per minute: 50 - 3000 U/min external spindle dia. in forward position: 50 mm feed force Z - max.: 3000 N spindle bore: 30 mm Main spindle capacity: max. 3,7 KW kW electrics - voltage/frequency: 400 / 50 -60 V/Hz Weight approx.: 1,0 t dimension machine approx.LxWxH: 2,2 x 1,0 x1,62 m The EMCO TURN 325 is a universal CNC/conventional lathe from the EMCO Group (Austria). It is positioned in the mid-range performance and size segment and is frequently used in training, workshops, and production. It is particularly designed for the precision machining of small parts, shafts, and chuck components. Automatic chuck Interface for bar feeder available Tedey Emfqjpfx Akiod Various accessories *

Condition: used, first registration: 10/1992, color: other, Year of construction: 1992 OLD QUALITY HEAVY DUTY WOOD TRAILER , EXTENDIBLE , WITH JONSERED 2190 CRANE. Todpfsy Emnxsx Akiod

Condition: used, Year of construction: 2000, functionality: fully functional, overall weight: 800 kg, chuck outer diameter: 800 mm, mount diameter: 520 mm, bolt circle diameter: 436 mm, cone mount: 286 mm, Pos. 1.0) Chuck diameter ø 800mm Three-jaw power chuck with 6 clamping jaws Manufacturer: SMW-Autoblock ø 800HL-6GR incl. Flange size 11: SMW Autoblock: 241261 FF2 Thread connection for draw tube: Workpiece clamping via jaws: Pneumatic or hydraulic operation. Incl. bolt-on jaws with serrated interface: Weight: approx. 700kg Good condition, low operating hours. ----- Pos. 1.1) Optional flange available Mounting diameter: 520 mm Bolt circle: 436.6mm; M24 Taper: KK 15: 285.78mm Width: approx. 40mm Weight: approx. 60kg _____ SMW-800HL description Suitable for clamping thin-walled workpieces. Designed for horizontal CNC lathes. Adjustable to 6 jaws. STANDARD EQUIPMENT Power chuck with mounting bolts, Tjdpfx Ajy Appmjkijd Incl. set of bolt-on jaws Low maintenance due to sealed design (Proofline series chucks). 6-jaw power chuck _____ Pos. 2) 3-jaw power chuck ø 800 mm Manufacturer: FORKARDT: Jaw interface: Serrated Size: to be provided Thread connection for draw tube: on request Spindle adapter flange for machine: on request Price incl. shipping: on request

Condition: used, Binns & Berry Trident E1000 Double Gap Bed Centre Lathe With Digital Readout System. Distance Between Centres 4500mm Swing Over Bed 1000mm. Swing in Gap 1500mm. Width of Gap 350mm. Spindle Bore 100mm. Spindle Speeds 4 - 1250rpm. Leadscrew 2 TPI. Dual Dials. Power to Saddle & Cross Slide. Todpfx Aezy Il Ejkiod Bison 625mm Diameter 4 Jaw Chuck. Fixed 3 Point Roller Bearing Steady. Weight Approx: 9000KG

Condition: used, Control: FANUC 0i-TD YOM: 2014 B-axis Max: 830° X-axis Travel: 243 mm Y-axis Travel: 50 mm Z-axis Travel: 740 mm Chuck Dia 10” Max. Workpiece Diameter: 350 mm Spindle Speed: 4000 RPM Max. Bar passage: Ø 64 mm Tool turret: 12 positions Tool attachment: bmt-65 Sub Spindle chuck Dia 6” Sub spindle speed: 6–6000 rpm Spindle nose: a2-8 Sub spindle nose: a2-5 Complete with swarf conveyor Machine Depth: 2080 mm Machine Weight: 9600 kg Todpfxezy Iquo Akijd

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, MAZAK QUICK TURN NEXUS 100-II Max. machining diameter: 280 mm Max. machining length: 300 mm Max. spindle speed: 6,000 rpm Max. bar diameter: 42 mm The machine is equipped with: - CNC control system: Mazatrol Matrix - KITAGAWA 3-jaw chuck BB-06, diameter 169 mm - Tool Eye Tsdpfszv D H Rjx Akiod - Interface for bar feeder - Automatic parts catcher - NC tailstock - Reinforced coolant pump - Chip conveyor, discharge to the side - 1 set of tool holders for a 12-position turret

Condition: used, Year of construction: 2005, Technical details: Todjy Ttyqopfx Akijd spindle passage: 54 mm z-axis: 900 mm turning length: 900 mm swing diameter: 560 mm facing movement (x-axis): 290 mm control: Simens Sinumerik 840D sl spindle turning speed - continuous: 0 - 6000 U/min diameter of main spindle: 120 mm max. torque on the spindle: 190 Nm tool turret: Typ Sauter number of tool tapers: 12 operating pressure: 5 - 6 bar quill stroke: 130 mm diameter of quill: 110 mm rapid traverse: 40 - 50 m/min total power requirement: 37,5 KW weight of the machine ca.: 8,0 t dimension machine approx.LxWxH: 4,8 x 2,4 x 2,3 m • Modular machine design for efficient 2-axis and 4-axis shaft machining as well as chucking part machining • Equipped with pick-up spindle • High basic accuracy and thermal stability as prerequisites for hard turning and precision machining • Prepared for automatic loading and unloading via gantry loader or integrated loading system • Separable machining area for simultaneous two-stage machining on the left and right main spindles • Lowerable tailstock can be combined with a counter spindle • Supports in-process and post-process measurement strategies *

Condition: excellent (used), Year of construction: 2004, Weiler Primus VC Lathe Primus VC with Heidenhain digital readout, year of manufacture 2004, in excellent original condition. The machine comes from the prototype workshop of a renowned German mechanical engineering company. CE compliant! Technical Data: Year of manufacture: 2004 Weiler Primus VC Center height: 140 mm Center distance: 500 mm Spindle bore: Ø 40 mm Tailstock taper: MT3 Quill stroke: 85 mm Thread types: Metric, Inch, Module, Diametral Pitch Metric thread pitches: 0.25 – 8 mm Spindle brake: switchable Tedpfxjy I U Dyj Akied Voltage: 400 V Dimensions: approx. 1.50 x 1.00 x 1.50 m (L x H x W) Weight: approx. 700 kg Additional equipment and accessories: Heidenhain control panel, chuck guard, leadscrew and feed shaft cover, emergency stop, operating manual, CE conformity declaration About the machine: The Weiler Primus VC is the smallest machine in the Weiler range. The Weiler Primus VC is a lathe for the highest demands: with stepless speed control, constant cutting speed, and a powerful 4 kW drive (40% duty cycle). The compact machine of great quality is found wherever maximum precision is required in limited spaces: such as in optical, electrical, and automotive workshops, laboratories, and even Formula 1. Offered here is a Weiler Primus VC lathe with Heidenhain digital readout, year of manufacture 2004. This lathe is in excellent, original condition. It comes from an operation where it was lightly used only for prototype construction. Very easy-to-use controls. The guideways are regularly lubricated via central lubrication. The Weiler Primus VC has been mechanically and electrically tested by us. Take the opportunity to view and test the Weiler Primus VC under power at our site. Further lathes from well-known manufacturers can be found on our website.

Condition: good (used), Year of construction: 1999, 1 Muratec MT12 CNC lathe with dual spindle and dual turret Tjdpfxsy Ta Sts Akisd Fanuc CNC control Year: 1999 Supplied with all tooling and tool holders.

Condition: excellent (used), Year of construction: 2015, Okuma GENOS L200E-MY CNC Lathe Technical Data Manufacturer: Okuma Model: GENOS L200E-MY Control: OSP-P300L-R Voltage: 400 V Phases: 3 P Frequency: 50/60 Hz Connected load: 15.3 kVA Tjdpfxoy R A N Aj Akiod Rated current: 25.6 A Short-circuit withstand capacity: 2.5 kA Max. turning diameter: Ø 200 mm Max. turning diameter x length: Ø 200 x 380 mm Swing over bed: Ø 450 mm Swing over cross slide: Ø 300 mm Workpiece weight (single-sided support): 120 kg Spindle diameter: Ø 100 mm Spindle nose: JIS A2-6 Spindle bore: Ø 66 mm Spindle speed range: stepless Spindle speed: 75 to 3000 rpm Number of tool stations: 12 Turret type: Multitasking V12 turret Tool holder, external turning tools: 20 x 20 mm Tool holder, internal turning tools: Ø 32 mm Rotating tool speed: 6000 rpm Travel (Z-axis): 400 mm Travel (X-axis): 165 mm Travel (Y-axis): 80 mm Feed range: 0.001 to 1000 mm/rev Rapid traverse Z-axis: 25000 mm/min Rapid traverse X-axis: 20000 mm/min Rapid traverse Y-axis: 10000 mm/min Tailstock quill diameter: Ø 55 mm Tailstock quill stroke: 80 mm Machine height: 2040 mm Footprint: 2120 x 1750 mm Machine weight: 4800 kg Year of manufacture: 2015 No guarantee is given for the correctness, completeness or up-to-dateness of the information provided.

Condition: used, Year of construction: 2017, machine/vehicle number: STA00197, XYZ CT52 2 Axis CNC Lathe Box Ways Slides Siemens 828D CNC Control Swing over bed 400mm Max’ machining dia. 200 mm X-axis stroke 115mm Z-axis stroke 290mm Spindle speed 5000 rev /min Spindle Bore 61mm Max’ bar work dia. 52mm 12 Station VD130 Turret Tailstock stroke 90 mm Rapid traverse rate 20 m/min X & Z Axis Cutting Feed rate 10 m/min X & Z Axis Machine Weight 2500Kgs Machine Size 1700 x 1240mm Manufactured 2017 Machine supplied with: 3 Jaw Chuck Power Chuck Tool Setting Probe Parts Catcher Chip Conveyor Auto Lubrication Tedezkbiropfx Akisd High Intensity Machine Light Toolbox For Sale With Jet Machinery Ltd Jet Machinery Stock Number:79265 Machine Serial Number: STA00197 £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 1992, operating hours: 53,500 h, functionality: fully functional, CNC turning machine Manufacturer: GILDEMEISTER Model: CTX-400 Year of manufacture: 1992 Control system: EPL-2 Operating hours: approx. 53,500 h Serial number: 310549 Technical data: - Turret: 12 stations VDI-30 Todpfx Aezcd Hlskied of which 6 stations are driven - Spindle speed: 25 - 5,000 rpm Drive power: 27.5 kW at 60% duty cycle - Spindle bore: Ø 72 mm - X-axis travel: 212 mm - Z-axis travel: 640 mm - Max. turning diameter: 500 mm - Turning diameter over guide: 290 mm - Hydraulic steady rest (following rest) Quill stroke 100 mm / MK4 mounting - Hydraulic steady rest SMW Autoblok - Hydraulic 3-jaw chuck 200 mm - Collet chuck Hainbuch - Chip conveyor - Parts catcher (disassembled / incomplete) - Complete programming manual - Mechanical and electrical documentation - Large accessory package of jaws / holders - Spare parts package (drive belts / small parts) - 2x foot switches - Machine weight: 5.2 t - Loading onto truck included

Condition: good (used), total width: 800 mm, total height: 1,500 mm, total length: 1,400 mm, steady rest CNC Lathe VDF Wohlenberg - U1270 MACH-ID 9187 Make: VDF Wohlenberg Type: U1270 Length:1400mm Tjdszcn Srepfx Akied Width:800mm Height:1500mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2012, Index GU 600 H Data X: 181 mm Z: 650 mm Chuck: 200 mm Turret: VDI 30 / 12-station Tsdpfoy Urf Ujx Akiod Siemens 840 D Main spindle: 65 mm Chip conveyor Coolant system Documentation

Condition: excellent (used), Year of construction: 2003, operating hours: 8,000 h, functionality: fully functional, feed length X-axis: 3,500 mm, feed length Y-axis: 2,800 mm, feed length Z-axis: 1,500 mm, workpiece weight (max.): 35,000 kg, spindle motor power: 120,000 W, spindle speed (max.): 4,000 rpm, turning diameter: 4,000 mm, total height: 3,100 mm, rotational speed (max.): 180 rpm, workpiece diameter (max.): 4,000 mm, Equipment: documentation/manual, A STARRAG DORRIES 2VC2800/280MC-FC-V CONTUMAT Todpfsy Uwg Rox Akied High-Production 4/5 AXIS Vertical Turning Centre with Siemens 840D cnc This is not a machining centre with a turning table but a real high power, heavy duty vertical turning machine with the high power turning table on a massive base with guideways to provide a Y axis This configuration enables the machine to turn a round component to its maximum diameter and machine a square component to a similar dimension – and many more possibilities in between If a DS CNC swivelling head would be purchased from DS this machine is ready for huge 5 axis work. For large precise and complex components in these industries this is the perfect ‘one stop’ machine Defence, Aero Engine, Nuclear, Turbines, Rail, Oil and Gas, Pumps, Gearboxes, Rockets etc. 12 month guarantee. PAYMENT PLAN AVAILABLE

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance Z-axis: 1,500 mm, chuck outer diameter: 1,800 mm, spindle speed (max.): 315 rpm, turning diameter: 2,000 mm, turning height: 2,450 mm, rotational speed (max.): 3,000 rpm, year of last overhaul: 2026, FOR SALE – 12 MONTHS GUARANTEE – CE MARKED A DORRIES-SCHARMANN VCE2000/180MC-FC CONTUMAT Vertical Turning, Centre for high accuracy heavy cut turning, high precision heavy PCD drilling and continuous rotary milling Delivered in 2002. Condition: Excellent - see INTRO page CNC specification – high level Siemens 840D Hydrostatic crossrail and ram guideways. Cutting and positioning feed rates up to 18m/min A 9-STATION MAGAZINE is for turning toolheads & machining heads. These heads are picked up by the ram during cycle The turning and milling heads are fed by a KELCH DOUBLE GRIPPER TOOL CHANGER, as seen on most machining centres The tool changer collects the turning tools (CAPTO C8) and live spindle tools (SK50) from a WERO magazine Tsdpfx Ajy Uw Emskijd The magazine as supplied with this machine originally has the capacity to hold 60 Capto C8 tools and 76 SK50 tools The KELCH toolchanger can change the tools in both vertical and horizontal working positions. This means, for example, that various SK50 tools can be fed into a right angle milling head while it remains on the ram MACHINE SALE POSSIBILITIES The machine specification will be finalized by the purchaser and VTT-WB New guarding will be supplied to match the final specification GUIDE PRICES A – machine without the pallet system but with the full tool changing and tool storage system. New guarding. CE marking 12 months full warranty, including 96% uptime guarantee and 12 months Preventive Maintenance Tool storage capacity can be reduced within this price £525,000 B – machine without the pallet system and toolchanging and storage system replaced with 30 pocket disc type magazine New guarding. CE marking 12 months full warranty, including 96% uptime guarantee and 12 months Preventive Maintenance £540,000 C – machine to original specification including full pallet system and full tool change system New guarding. CE marking 12 months full warranty, including 96% uptime guarantee on machine but excluding pallet and toolchange system £650,000

Condition: used, Year of construction: 2009, machine/vehicle number: 97050022, turning length: 550 mm, turning diameter: 350 mm, spindle speed (max.): 3,500 rpm, spindle motor power: 18,500 W, bar passage: 74 mm, The Saeilo Contur MSL 450 is a used CNC turning machine, manufactured in 2009 (first commissioning in 06/2009), equipped with a Siemens Sinumerik 810D control system. It can turn parts with a diameter of up to 350 mm and a length of up to 550 mm, with a bar capacity of 74 mm. This makes it suitable for chuck and bar work in small and medium-sized series. The machine is located in the Düsseldorf area and was operational during our inspection. TECHNICAL DATA - Year of manufacture: 2009 - Control system: Siemens Sinumerik 810D - Maximum turning diameter: 350 mm Tedpfxsz H Uc Ie Akiod - Maximum turning length: 550 mm - Bar capacity: 74 mm - Maximum spindle speed: 3,500 rpm - Spindle drive: 18.5 kW - Tailstock: live center, with hydraulic quill actuation EQUIPMENT AND ACCESSORIES - Chip conveyor, Hwang Kang (hinged belt) - Tool holders, fitted - Turning and clamping tools - Setup tools CONDITION The machine was operational during our inspection on 01.10.2026. We can send you short videos of the machine in operation upon request. AREAS OF APPLICATION Suitable for flanges, bushings, bolts and shafts up to 550 mm in length, for example in mechanical engineering, hydraulics and contract manufacturing. LOCATION AND HANDLING The machine is located in the Düsseldorf area. Inspection is possible by appointment. Disassembly, loading and transport are organized by the buyer; upon request, we can provide you with contact details for freight forwarders in the region. Price on request. Please contact us via the contact form.

Condition: excellent (used), Year of construction: 2024, spindle bore: 44 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 300 mm, spindle motor power: 7,500 W, total height: 1,800 mm, total length: 2,500 mm, total width: 1,300 mm, quill diameter: 32 mm, overall weight: 3,500 kg, CNC Lathe with c-axis QuickTech - T6 MILL MACH-ID 9822 Make: QuickTech Type: T6 MILL Control: Mitsubishi Touch YOP: 2024 Max. turning Ø: 400mm X-Axis: 200mm Z-Axis: 300mm Spindle bore: 44mm Speedrange: 5000Rpm Spindle power: 7.5kW ATC / revolver: 12 Tjdpfez H I Haex Akiod Speed live tools:4000Rpm Power live tools:5kW Pinole taper: 4Mk Stroke pinole: 70mm Quill Ø: 32mm Length: 2500mm Width: 1300mm Height: 1800mm Weight: 3500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!