Used Wire Erosion for sale (2,771)

Condition: good (used), Hohner Economy 25/40 Wire Stitcher Very good condition. A reliable machine with legendary durability. Technical specifications: Capacity: 206 cycles/min Sewing thickness: 25mm (punching up to 40mm without closing the staple from the bottom) Giedpfx Aoy Hgi Ssmuet Wire diameter: max. 1mm Power supply: 380V Weight: 240kg The machine has an adjustable table for block and booklet stitching.

Condition: good (used), Introma ZD-2 SR Wire Stitcher The machine is in very good condition and ready to use. This is the current production model. Technical specifications: Capacity: 180/min Sewing thickness: max. 25mm Wire diameter: max. 1mm Power supply: 230V Weight: 230kg The machine has an adjustable table for block and booklet stitching. Side and front margins. Giodsy Hgixspfx Amust Instructions included.

Condition: like new (used), Year of construction: 2024, operating hours: 2,200 h, functionality: fully functional, workpiece weight (max.): 850 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, total height: 2,245 mm, total length: 3,445 mm, total width: 2,595 mm, wire diameter (max.): 0.3 mm, type of input current: three-phase, overall weight: 3,684 kg, input frequency: 60 Hz, Equipment: cooling unit, We are offering this Sodick VN 600Q wire EDM machine, year of manufacture 2024. Manufacturer: Sodick Model: VN 600Q Year: 2024 Condition: like new The machine currently has 1,137 hours of cutting time and approx. 2,200 operating hours. • 10-year warranty on positioning accuracy • Linear motors (X, Y, U, V axes) • Absolute linear glass scales (X, Y, U, V axes) • Ceramic components • LN3W generator • Remote control • Enhanced operator-friendliness • Energy-saving circuit • Automatic water level control • Fixed Jet AWT with pop-up function • Heart NC software • Wire end remover • Dielectric cooling unit • Voltage stabilizer • LAN interface • USB port Further specifications for this machine: Travel (X/Y/Z axis, mm): 600 x 400 x 310 Travel (U/V axis, mm): 90 x 90 Max. workpiece weight (kg): 850 Table height from floor (mm): 1,000 Machine dimensions (W x D x H, mm): 2,595 x 3,445 x 2,245 Machine weight (kg): 3,684 Air pressure: 0.65 MPa, 30 NL/min Total power consumption: 11.5 kVA, 3 phase, 50/60 Hz Taper angle: ±15° (workpiece thickness: 120 mm) Wire diameter (mm): ø 0.1 ~ ø 0.3 mm Wire tension (N): 3 ~ 23 N Category ID: 1896 Type ID: 2593 Machine type: Wire EDM machine Gijdpeyyy Disfx Amuet If you have any questions or require further information, feel free to send us a message or call us.

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Progress VP2 Year of manufacture: 2011 Travel ranges: X = 350 mm, Y = 250 mm, Z = 256 mm U/V axis travel ranges: +/- 70 mm Gijdpsywkuyjfx Amust Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 kg (submerged), 450 kg (non-submerged) Achievable surface finish: Ra: 0.20 µm Maximum cutting speed: 500 mm²/min Glass scales on X and Y axes for increased precision Available wire diameters: 0.15 – 0.33 mm Submerged wire EDM with automatic wire threading and re-threading after wire breakage Manual front door (accessible from one side) Including AGIEJOGGER handbox for easy setup AGIE IPG-V Generator with Power Module AGIEVISION CNC control Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and thoroughly overhauled after receipt of order. A test cut with optimal surface finish is then carried out for acceptance. You will receive a 6-month warranty for the machine. We are happy to offer on-site commissioning and training.

Condition: refurbished (used), functionality: fully functional, warranty duration: 3 months, type of cooling: water, welding current (min.): 40 A, welding current (max.): 420 A, Equipment: type plate available, ESS Powermag 461 – Water-Cooled MIG/MAG Double wire feed 3 Months Warranty Refurbished, tested, serviced, and ready for immediate use. Specifications: 40-420 AMP 380 Volt Water-cooled Synergic 2/4 Step / 4 Roller drive Gijdsywaqkspfx Amust Double Wire Feed 36 Steps adjustable Spot welding Fixed programs Including 2 MIG PRO5000 welding torches, earth work cable with clamp, gas cable, and +- 3 Meter Interconnection hose. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Year of construction: 2004, condition: ready for operation (used), Ultrasonic die polishing machine / Wire drawing machine Esteves-DWD 107D16 Year of manufacture: 2004 230 V 20 kHz 4–6 bar Gijdpfsyxxy Hsx Amuot

Condition: used, Year of construction: 2013, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, Travel: X 600 / Y 400 / Z 310; Water bath machine; Automatic wire threading; Chiller. Gedpfx Ajx Hgg Domuoit

Condition: refurbished (used), Year of construction: 1999, functionality: fully functional, drawing speed: 10,000 mm/s, inner diameter: 600 mm, load capacity: 3,000 kg, wire diameter (max.): 14 mm, Year of manufacture 1999 Maximum speed 10 m/s Total installed power 230 kW Key status Complete electrical modernization TEUREMA EHS-110 wire drawing line, a heavy-duty industrial machine equipped with a Tecno Impianti drawing bench and designed for reliable production performance. The line has undergone a complete electrical modernization, including a new main electrical cabinet, Siemens S7-1500 PLC, Siemens HMI 1200, 100% new wiring and new push-button stations, significantly improving reliability, maintenance and overall operation. Gedpfsy Ex Ecox Amuoit Line configuration Pay-off stands 2 tilting pay-off units. Maximum coil weight per unit: 3,000 kg. Vertical pay-off tower 6-meter tower with lifting and lowering carriage operated by hoist. Descaler Mechanical descaler. Lubrication box 1.5 kW motor at 1,500 rpm. TECNO IMPIANTI drawing bench 2 passes. Double-ring capstan: Ø 610 mm and Ø 760 mm. 3-speed gearbox: 3.90 / 7.20 / 10.00 m/s. Power: 160 kW. Frequency: 50 Hz. Horizontal coiler Horizontal drive. Maximum coil weight: 3,000 kg. 2-speed gearbox: 7.3 / 10.0 m/s. Maximum coil diameter: Ø 1,200 mm. Core diameter: Ø 600 mm. Useful spool width: 900 mm. Power: 45 kW. Technical data • Incoming wire diameter: 5.5 to 14 mm • Outgoing wire diameter: 4 to 12 mm • Number of blocks: 1 vertical • Maximum line speed: 10 m/s • 2 x CL30 A 33 Eurolls cassettes • Rollers: Ø 150 x Ø 90 x 15/20 mm • Total machine power: 230 kW • Frequency: 50/60 Hz Electrical and automation upgrade • Completely new main electrical cabinet • Siemens S7-1500 PLC • Siemens HMI 1200 • 100% new wiring • New push-button stations This line combines the strength of a proven industrial machine with a complete upgrade of its electrical and control systems, making maintenance easier, improving reliability and simplifying integration into modern production environments. Available services • Installation • Assembly • Commissioning • Technical assistance TEUREMA EHS-110 wire drawing line, manufactured in 1999, equipped with a Tecno Impianti drawing bench and capable of operating at speeds of up to 10 m/s. The machine features a complete electrical modernization with a new main electrical cabinet, Siemens S7-1500 PLC, Siemens HMI 1200, completely new wiring and new push-button stations, offering a robust, reliable and production-ready industrial solution.

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, total length: 1,050 mm, total width: 650 mm, workpiece height (max.): 250 mm, AGIECUT Excellence 3 eCut Year of manufacture: 2005 Gsdpfeyu Iq Eox Amueit Travel paths: X = 500 mm, Y = 350 mm, Z = 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.10 µm Available wire diameters: 0.10 – 0.33 mm Submerged tank machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Including AGIEJOGGER hand box for convenient machine setup Including AGIESETUP 3D AGIEVISION control system AGIE IPG generator with eCut technologies Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine will be cleaned, overhauled, and thoroughly tested by us upon receipt of order. Includes user training at Techma on your overhauled machine Optional services available on request: - Transport - Commissioning - Chiller unit - Clamping devices

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1320, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, total height: 2,080 mm, total length: 1,650 mm, total width: 2,225 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 400 mm, workpiece length (max.): 600 mm, table width: 400 mm, table length: 600 mm, feed length X-axis: 350 mm, feed length Y-axis: 250 mm, feed length Z-axis: 220 mm, tank capacity: 600 l, Equipment: compressor, cooling unit, documentation/manual, fridge, For sale: SODICK CNC Wire EDM - Model: AQ325L LN 1W - Year: 2002 - Serial No.: 1320 The machine has been regularly maintained by BTS COMPANY d.o.o. and CELADA d.o.o.. It has been used for machining workpieces up to 5 kg and various toolmaking tasks. Due to its high precision, it can also be used as a measuring machine. It is connected to the electrical grid and ready for operation. Gjdpfey Ib Ewsx Amusit

Year of construction: 2003, condition: good (used), functionality: fully functional, machine/vehicle number: 03234, 6 Brush ( 3 pairs) descaling machine for steel wire size 5.5mm - 16.0 mm max (low carbon) Brush pairs arranged in a 60 degree offset for maximum effect. A very clean looking machine. Gisdpfjx R Uzdex Amuet On site viewing and inspection recommended

Condition: used, functionality: fully functional, machine/vehicle number: D20E/8022, Offer Number: D20E/8022 Machinetype: multiple wire drawing machine - dry Info: straight through Make: VEB Type: 8 Block Constr. year: Giodpswi Tidsfx Amust inlet wire diameter: 2,5 mm finished wire diamter: 0,8 mm number of drafts: 8 diameter of capstan: 400 mm speed -meters/sek: 15 m Location: Europe

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: D12E/8177, Offer Number: D12E/8177 Machinetype: wire nail press Make: WAFIOS Type: N61 Constr. year: 1986 Gedowi Tk Iopfx Amusit wire diameter: 3,1-5,2 mm nail length: 13-150 mm capacity - pieces/min: 370 Location: Europe

Condition: used, Year of construction: 1968, functionality: fully functional, machine/vehicle number: D06L/7826, Offer Number: D06L/7826 Machinetype: wire and strip bending machine Make: BIHLER Type: GRM50 Constr. year: 1968/2016 wire diameter range: 0,5 -5,0 mm width of band: max 70 mm Giedpfx Amowi S Ewsujt feeding length: max 320 mm output pieces/min: max 132 number of slides: 5 Location: In our warehouse

Condition: used, functionality: fully functional, machine/vehicle number: D20E/7694, Offer Number: D20E/7694 Machinetype: multiple wire drawing machine - dry Make: SKET / MILL Type: 8 BLOCK Constr. year: inlet wire diameter: 6,5 mm finished wire diamter: 1,6 mm number of drafts: 8 diameter of capstan: 550 mm and 650 mm Giedpfewi S Ixjx Amujt speed -meters/sek: 8-12 Location: Europe

Condition: used, Year of construction: 1955, functionality: fully functional, machine/vehicle number: D12L/7525, Offer Number: D12L/7525 Machinetype: wire nail press Make: WAFIOS Type: S40 Constr. year: 1955 diameter range: 0,8-1,8 mm nail length: 10-40 mm output - pieces/min: 550 Gisdpfewi S Rgex Amujt Location: In our warehouse

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: D12E/8151, Offer Number: D12E/8151 Machinetype: wire nail press Make: ENKOTEC Type: NA05 SH Constr. year: 2011 diameter range: 1,8-2,5 mm Gedpswi Tl Esfx Amusit nail length: 32-57 mm output - pieces/min: 2000 Location: Europe

Condition: used, Year of construction: 1982, functionality: fully functional, machine/vehicle number: D12L/8273, Offer Number: D12L/8273 Machinetype: wire nail press Giedpfxjwi Suro Amujt Make: WAFIOS Type: N5 Constr. year: 1982 wire diameter: 2,2-4,2 mm nail length: 13-105 mm capacity - pieces/min: 430 Location: In our warehouse

Condition: used, Year of construction: 1965, functionality: fully functional, machine/vehicle number: D12E/8243, Offer Number: D12E/8243 Machinetype: wire nail press Make: WAFIOS Gsdpswi Svpjfx Amujit Type: S300 Constr. year: 1965 diameter range: 4-10 mm nail length: 50-300 mm output - pieces/min: 150 loacation: Location: Europe

Condition: used, Year of construction: 1970, functionality: fully functional, machine/vehicle number: D12L/8171, Offer Number: D12L/8171 Machinetype: wire nail press Info: with assembly device for head plates Make: WAFIOS Type: S110 Constr. year: 1970 Gsdewi Tk Uopfx Amujit wire diameter: 2,2-3,8 mm nail length: 13-110 mm capacity - pieces/min: 350 Location: In our warehouse

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: D12L/8263, Offer Number: D12L/8263 Machinetype: wire nail press Make: WAFIOS Type: N90 Constr. year: 1997 diameter range: 2,0-4,0 mm Gedpfx Ajwi Tg Aomujit nail length: 50-100 mm output - pieces/min: 800 Location: In our warehouse

Condition: used, Year of construction: 1974, functionality: fully functional, machine/vehicle number: D12L/8212, Offer Number: D12L/8212 Machinetype: wire nail press Make: WAFIOS Type: N6 Constr. year: 1974 diameter range: 3,1 - 5,2 mm nail length: 13 - 150 mm output - pieces/min: 370 Godowi Tikspfx Amueit Location: In our warehouse

Condition: used, Year of construction: 1966, functionality: fully functional, machine/vehicle number: D12L/7651, Offer Number: D12L/7651 Machinetype: wire nail press Make: WAFIOS Type: S50 Constr. year: 1966 diameter range: 1-2,2 mm Giedpfx Amewi S I Soust nail length: 10-50 mm output - pieces/min: 520 Location: In our warehouse

Condition: used, Year of construction: 1982, functionality: fully functional, machine/vehicle number: D12L/8249, Offer Number: D12L/8249 Machinetype: wire nail press Make: WAFIOS Type: N3 Constr. year: 1982 Gisdpewi Tgvjfx Amust diameter range: 1,0-2,4 mm nail length: 10-50 mm output - pieces/min: 700 Location: In our warehouse

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: D12E/8139, Offer Number: D12E/8139 Machinetype: wire nail press Make: ENKOTEC Type: NB01 Constr. year: 1994 diameter range: 2.8-4.2 mm Godpfxowi Tmis Amueit nail length: 60-103 mm output - pieces/min: 950 Location: Europe