Used Wire Cutting Machine for sale (67,496)

Condition: used, Technical data paper roll cutting machine. This machine can only be used for small residual rolls up to a maximum diameter of 400 mm in order to automatically unwind these residual rolls and cut the paper into strips so that it can be better pressed into bales. Manufacturer unknown Type unknown Year of manufacture unknown Dimensions feed table for rolls: Width inside of rolls 2.195 mm Height inside of castors 465 mm Transport dimensions Feed table over all: 2,650 x 1,300 x 2,150 mm (W x H x D) Dimensions roller cutter: Width cutting shaft inside 2.250 mm Itjdpfx Asu Tg Spoa Ijh Transport dimensions of the roll slitter over all: 3,050 x 1,550 x 550 mm (W x H x D) Remarks: There are no further data or documents available. A viewing is possible by appointment. We assume no liability for the technical data and possible errors.

Condition: as good as new (ex-display), functionality: fully functional, Very nice paper cutter for sale. Brand: Eba, type 10/550 CNC. Equipped with a hydraulic pressing system, air table, light beam, geared mechanism, and manual operation, 220 volts. This machine comes from a government office and has been used very little. It is in as-new condition. You are welcome to test this machine at our location. We can arrange the transport and packaging for you and load it into a truck or container. Iodpfxjzc I Exe Aa Ioth Please inquire about a price including transport (location within the Netherlands). Regards, Henk Hoos.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, Polar 78 X Year of manufacture: 2004 Cutting width: 78 cm Air table with side tables Program Spare blades Itsdpfx Aaezdvg Se Ioh Lighting units Immediately available

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 18,948 h, machine/vehicle number: A0215A0087, laser power: 2,000 W, sheet thickness steel (max.): 12 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 75 mm, No minimum price – guaranteed sale to the highest bidder! A maintenance checklist from December 2025 is attached! The defects listed there have been completely rectified (see attached activity report from Trumpf)! Iodpfozdp Ntex Aa Ioth TECHNICAL DETAILS Working area X-axis: max. 3,000 mm Working area Y-axis: max. 1,500 mm Working area Z-axis: max. 75 mm Speed X: max. 60 m/min Speed Y: max. 60 m/min Speed Z: max. 60 m/min Simultaneous speed X/Y: max. 85 m/min Sheet metal thickness, steel: max. 12 mm Sheet metal thickness, stainless steel: max. 6 mm Sheet metal thickness, aluminum: max. 5 mm Workpiece weight: max. 575 kg MACHINE DETAILS Control system: B&R Arnco Laser type: TruCoax 2000 Laser power: 2,000 W Dimensions and weight Footprint (L x W x H): 7,400 x 3,300 x 2,300 mm Transport width: 2,464 mm Weight: 9,000 kg Electrical connection: 65 kVA Operating hours (as of December 17, 2025) Operating hours, laser: 18,948 h Laser beam on-time: 3,635 h EQUIPMENT Closed machine frame with integrated laser head Motion unit for high-precision machining Drives with maintenance-free three-phase servo motors Sheet metal support accessible from both sides Enclosed beam guidance Fully integrated cooling unit Traveling extraction system Collection container for falling parts under the working area Positioning laser diode FocusLine

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, MESSER MULTITHERM 3600 GLOBAL CNC PLASMA BED LENGTH 10300mm BED WIDTH 2100mm RAIL WIDTH 3650mm HYPERTHERM HPR 260. Cutting capacities: Mild steel cut capacity Dross free* 32 mm (1-1/4") Production pierce 38 mm (1-1/2") Maximum cutting capacity 64 mm (2-1/2") Stainless steel cut capacity Production pierce 32 mm (1-1/4") Iedpfjy Tpqxex Aa Ijth Maximum cutting capacity 50 mm (2") Aluminum cut capacity Production pierce 25 mm (1") Maximum cutting capacity 50 mm (2")

Condition: new, Year of construction: 2025, Laser cutting machine cnc 3 axis this machine is also for profile, tub and different shape. we can deliver machine also with automatic magazin for un-mand production. Effective cutting diameter for round pipes: Ø10 mm – Ø225 mm Effective cutting size for square pipes: □10 mm – □225 mm X/Y/Z axis travel: 270 / 6,900 / 230 mm X/Y/Z axis motor power: 0.75 / 2.9 / 0.75 kW Positioning accuracy: ±0.1 mm Repeatability accuracy: ±0.1 mm Maximum travel speed Y axis: 110 m/min Universal maximum rotation speed: 120 r/min Maximum acceleration: 1.5G Maximum pipe feed length: 6,200 mm Maximum load weight: 300KG Total electrical power of the machine: 22 kva Machine size: 10.400 x 2.180 x 2.400 mm The weight of the machine: 3 ton Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland Itsdjktffzopfx Aa Ish

Condition: good (used), Year of construction: 2018, 1 used CNC wire EDM machine Make: Sodick Itodeyknpgepfx Aa Ieh Model: AQ 750 L, year 2002, overhauled by Sodick in 2018 4000 operating hours since overhaul Control: MARK 30 LN 1 W Wire threading: 97 Pipe AWT

Condition: used, Roll guiding device WITELS-ALBERT Berlin, type ER 7 Guiding roller width: 30 mm Guiding roller diameter: 30 mm Itjdpfjzczvdox Aa Ijh Belt cross-section: approx. 1.5 x 10 mm or 0.5 x 25 mm - Individual adjustment for the 3 upper guiding rollers via wing nut and lock nut - Quick-release mechanism via eccentric lever for the 4 lower guiding rollers - 2 pre-forming guiding rollers, Ø 32 x 13 mm, mounted with a 90° offset - For guiding strip steel, last used for a belt cross-section of approx. 1.5 x 10 mm Space required L x W x H: 250 x 100 x 150 mm Weight: 5 kg Good condition

Year of construction: 2020, condition: excellent (used), Cabbage shredders S65 Cabbage cutting machine 2020, Stainless, cabbage shredding machine, with two top mounted de-stalkers, 5000kgs - 7500kgs per hour, disk diameter 650mm can be used for whole large cabbage heads, mobile, 3Ph Iodpfx Ajy H Hm Rja Ioth

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: SENFENG, laser type: fiber laser, laser source manufacturer: MAX, laser power: 1,200 W, laser wavelength: 1,080 nm, sheet thickness (max.): 12 mm, table length: 600 mm, table width: 600 mm, table height: 50 mm, working length: 600 mm, working width: 600 mm, working height: 50 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 50 mm, cutting speed: 500 mm/min, positioning accuracy: 0.01 mm, repeat accuracy: 0.01 mm, input voltage: 220 V, input frequency: 50 Hz, type of cooling: air, overall weight: 151 kg, total length: 1,110 mm, total width: 1,205 mm, total height: 775 mm, warranty duration: 12 months, Equipment: CE marking, cooling unit, dust extraction, emergency stop, fume extraction, SENFENG Tools D-Series – 7-in-1 Desktop Laser Workstation The SENFENG Tools D-Series is a compact, multifunctional laser workstation for workshops, small manufacturing companies, repair shops, creative studios, metalworking businesses, and professional users who want to combine multiple processing steps in a single system. The D-Series combines CNC laser cutting, CNC laser engraving, diode laser cutting, diode laser engraving, handheld laser welding, handheld laser cutting, and laser cleaning and rust removal. This reduces external processing costs, saves space, and expands production capabilities within the company. Depending on the configuration, the series is available with 800W or 1200W fiber laser power, as well as an optional diode laser. The dual-laser system enables the processing of both metals and non-metals: the fiber laser is designed for cutting, welding, and cleaning metals, while the blue diode laser can cut or engrave wood, acrylic, leather, and other non-metals. Key advantages: • 7-in-1 laser workstation for cutting, welding, cleaning, and engraving • Up to 1200W fiber laser power • Optional fiber laser and diode laser system • Max. cutting thickness: carbon steel up to 12 mm, wood up to 25 mm • CNC processing speed up to 500 mm/s • Repeat accuracy up to ±0.01 mm in Ultra-Cut models • Fully enclosed work area with integrated smoke extraction • Graphite protective plate with drawer design • Laser head change in approx. 30 seconds • Intelligent height following function, edge detection, and obstacle avoidance • Common edge cutting for better material utilization • Control via PC, mobile device, or touch panel Available variants include D300 and D600 Welder, D300 and D600 Combo, D300 and D600 Combo Pro, and D300 and D600 Ultra Cut. The D300 models are designed for compact workspaces, while the D600 models offer more power and a workspace of up to 600 × 600 mm. For handheld laser welding, the machine supports continuous welding, spot welding, and pendulum welding. Depending on the model, the welding thickness ranges from 0.2 to 4 mm or 0.2 to 5 mm. The air-cooled system is designed for flexible use in workshops and does not require extensive industrial infrastructure. The Combo and Combo Pro versions combine CNC automation with handheld processing. Users can flexibly switch between precise CNC processing and manual processing. Typical materials include stainless steel, carbon steel, aluminum, brass, galvanized steel, wood, acrylic, leather, and other suitable materials. The fully enclosed safety design creates a visible and protected work area. Emergency stop, smoke extraction, and a mechanical laser selection switch support safe and clean operation. Depending on the model and market version, the D-Series has CE, FDA, FCC, and other relevant certifications. Itedpjzfhn Refx Aa Ish Typical users include metalworking shops, automotive repair shops, custom fabrication studios, small-batch manufacturers, signage and engraving companies, wood and creative workshops, educational institutions, and teams for prototype construction and product development. The SENFENG Tools D-Series is a compact solution for users who want to handle more tasks internally with a single machine – from laser cutting to engraving, welding, and cleaning.

Condition: good (used), functionality: fully functional, Year of construction: 2011, Bystronic Bystar 3015 Flatbed Laser CO² + Bytrans Cross 3015 (Sheet Metal Automation) Laser medium: CO2 Laser beam diameter: 20mm Laser power: 4.4 kW Machine dimensions (L/W/H): 9500/6500/3500 (incl. Doldson extraction system) Itodpoyztchjfx Aa Ijh Table length and width: 3000/1500 mm Cutting area -x/-y: 3000/1500 mm Sheet thickness steel: 25 mm Sheet thickness stainless steel: 20 mm Sheet thickness aluminium: 12 mm Machine operating hours: 106,367 h Laser operating hours (excitation module): 73,725 h Beam on hours: 50,873 h Includes: Depro 6-SPRK extraction system Bylaser 4400 resonator WKL 430 chiller unit Subject to prior sale, modifications, and errors!

Condition: excellent (used), Year of construction: 2004, WIRE BELT BLAST MACHINE MANUFACTURER: RÖSLER WIRE BELT BLAST MACHINE BRAND: RÖSLER Manufacturer: Rösler Type: RDGE 800-4 Year of manufacture: 2004 Passage width: 800mm Passage height: 550mm Spinning wheel: 4 pieces with frequency converter, Filter system: wet filter system With several inlet and outlet belts. Incl., control cabinet, complete documentation, etc. TOP condition! System is dismantled! WIRE BELT BLAST MACHINE BRAND : RÖSLER Brand: Rösler Type: RDGE 800-4 Itedpfxov Idf Io Aa Ioh Year: 2004 Belt Width : 800mm Inlethigh: 550mm Turbine: 4 Pieces with Drivers Filter: Wet Filter With many inlet- and outlet transport belt Incld. Main Panel, complete Doku Very good condition! Machine it s now desmantly Price: Loading on Truck Price: Loading on Truck Warranty: 6-month function and warranty guarantee when commissioned by DECK Sarl. Spare parts supply for the next 10 years Warranty: 6-month Functions- and warranty from DECK Sarl. When DECK Sarl. make the assembly OPTIONAL: Delivery to your factory: Assembly / commissioning / training Assembly by foreman We also offer spare parts for Rösler, Schlick, Wheelabrator, Gietart etc. blasting machines! We can offert for spare parts for Rösler, Shot Blasting Machines!

Condition: good (used), Year of construction: 2002, Ref. -No.: 10442 Manufacturer: LIEBHERR Type: LC 122 Year of construction: 2002 Type of control: CNC-Steuerung Control: LIEBHERR PC NC Storage location: Halberstadt Country of origin: Germany Hob diameter max.: 90 mm Table Diameter: 145 mm Max. Module: 3 mm Smallest number of millable teeth: 4 Milling head swivel angle: +/- 45 ° Resolution accuracy: 0,1 Degree Workpiece table load: 17 kN Milling speed: 450 - 4.500 1 / min Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 55 A Fuse in the supply line: 63 A Itsdpfx Aaeym Nbce Ijh Max. milling diameter spur gears/helical gears: 125 mm Max. milling width spur gears/helical gears: 250 (axial) mm Spindle stroke: 180 mm Max. cutter width: 200 mm Further information: Ambient temperature: +12°.....+40° Operating noise: 78 dB (A) Milling head designation: motor milling head Workpiece axis: vertical Stand: movable Table: fixed Milling method: axial hobbing in the same or opposite direction The machine can be inspected under power by arrangement.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, STC-Ref: G-071-2423 Polar 78-ES, Year: 1998 format: 0x780 mm equipped with: - safety light beam - photo-cell - rear table guard - datastore for programmes - airtable at left side - airtable at left side - airtable Itjdezdu N Espfx Aa Ioh - monitor

Condition: excellent (used), Year of construction: 2009, Beam on time: approx. 17,600 hours Laser on time: approx. 45,500 hours Iedpfxszcvx To Aa Ieth Includes Loadmaster.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: BOCHU, laser type: fiber laser, laser source manufacturer: MAX, laser power: 6,000 W, laser wavelength: 1,080 nm, pipe diameter (max.): 220 mm, pipe length (max.): 6,000 mm, cutting speed: 10,000 mm/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.03 mm, workpiece weight (max.): 200 kg, power: 1.5 kW (2.04 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 3,150 kg, total length: 9,530 mm, total width: 1,950 mm, total height: 2,200 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, SENFENG SF6020T Tube Laser Cutting Machine – 1.5–6kW Fiber Laser Tube Cutter, TÜV-CE Certified The SENFENG SF6020T is a versatile and efficient tube laser cutting machine for the precise processing of round tubes, square tubes, rectangular tubes, and various profiles. With laser powers ranging from 1.5kW to 6kW, it is suitable for metal fabrication companies, tube processors, furniture manufacturers, fitness equipment production, construction machinery, vehicle frames, shelving systems, and general industrial manufacturing. The SF6020T is equipped with follow-up support, a pneumatic self-centering chuck, and a professional CNC system for tube processing. It offers stable cutting performance, strong dynamics, and reliable accuracy in daily operation. Key Technical Data: • Model: SENFENG SF6020T • Laser Power: 1.5–6kW • Tube Length Range: 2000–6500 mm • Round Tube Range: Φ20–Φ220 mm • Square Tube Range: □20–□150 mm • X/Y Positioning Accuracy: ±0.05 mm • X/Y Repeatability: ±0.03 mm • Maximum Rapid Traverse Speed: 100 m/min • Maximum Chuck Speed: 100 rpm • Maximum Acceleration: 1.0G • Maximum Tube Load: 200 kg • Tube Weight: ≤33 kg/m • Machine Weight: approx. 3150 kg • Machine Dimensions: approx. 9530 × 1950 × 2200 mm Ijdpfszd Enxsx Aa Ijth • Power Supply: 3-phase, 380V / 50Hz • Protection Class Main Power Supply: IP54 • TÜV-CE Certified Processable Tubes and Profiles: • Round Tubes • Square Tubes • Rectangular Tubes • Oval Tubes (on request) • I-Beams • U-Profiles / Channel Steel • H-Beams • Equal-Angle Steel • Unequal-Angle Steel The pneumatic self-centering chuck enables fast and efficient clamping. The lightweight, low-inertia design supports high rotational speeds, reduces energy consumption, and lowers operating costs. The integrated chuck cover protects against dust and cutting debris, increasing reliability during continuous operation. The follow-up support system supports long tubes during processing and reduces accuracy losses due to deflection. The machine bed is made of welded rectangular tubes and is stress-relieved and precisely machined. This ensures high rigidity, low vibration, and long service life. The FSCUT 3000DE-G CNC system was specifically developed for tube laser cutting. It supports real-time compensation of tube center deviation, automatic loading and unloading, follow-up support function, tube process library, TubePro cutting software, and professional TubesT nesting software. Optional Automation: • Semi-automatic Loading System • Simplified Fully Automatic Loading System • Fully Automatic Loading System • Standard Unloading System 2 m • Optional Unloading System 3 m / 4 m SENFENG Germany has its own after-sales team and offers installation, commissioning, operator training, and technical service. In addition, a local spare parts warehouse is available in Germany to enable fast service support and reduce potential downtime. Other available TÜV-CE certified SENFENG tube laser models: SF6020T, SF6035T, SF6038T, SF9020T, SF6020NT, SF6038NT, SF9032NT, SF9035NT, SF9038NT, and SF12038NT.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: BOCHU, laser type: fiber laser, laser source manufacturer: MAX, laser power: 6,000 W, laser wavelength: 1,080 nm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 16 mm, sheet thickness brass (max.): 12 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,010 mm, working width: 1,510 mm, working height: 100 mm, travel distance X-axis: 3,010 mm, travel distance Y-axis: 1,510 mm, travel distance Z-axis: 100 mm, cutting speed: 100 mm/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.02 mm, workpiece weight (max.): 1,100 kg, power: 1.5 kW (2.04 HP), input voltage: 380 V, type of input current: three-phase, type of cooling: water, overall weight: 5,230 kg, total length: 4,921 mm, total width: 2,225 mm, total height: 2,317 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, SENFENG SF1530NP 6kW fully enclosed compact fiber laser cutting machine The SENFENG SF1530NP 6kW is a fully enclosed, compact fiber laser cutting machine designed for efficient and precise sheet metal processing. With a working area of 1500 × 3000 mm, it is ideal for workshops, job shops, and manufacturing companies looking for a space-saving, safe, and reliable laser cutting solution. The machine is equipped with a 6kW MAX fiber laser source, a RayTools laser cutting head, and a BOCHU CNC laser cutting system. It is suitable for cutting stainless steel, carbon steel, aluminum, brass, and other metal sheets. The compact design, along with the integrated laser source and integrated control cabinet, reduces the required floor space without compromising stable cutting performance. Technical highlights: • Working area: 1500 × 3000 mm • Laser power: 6kW • MAX fiber laser source • RayTools or Precetic laser cutting head • BOCHU CNC laser cutting system • X/Y positioning accuracy: ±0.05 mm • X/Y repeatability accuracy: ±0.02 mm • Maximum speed: up to 100 m/min • Maximum acceleration: 0.8G • Maximum table load: 1100 kg • Machine dimensions: approx. 4921 × 2225 × 2317 mm Itjdpfx Aaozd Dz Rj Ieh • Machine weight: approx. 5230 kg • Power supply: 3-phase, 380V / 50Hz • Protection class of power supply: IP54 The fully enclosed design increases operational safety and supports better smoke and dust control. The pull-out work table facilitates loading and unloading as well as the removal of residual material. The automatic gas distribution system enables precise control of nitrogen, oxygen, and compressed air, reducing manual adjustments. Typical applications include sheet metal processing, mechanical engineering, signage, kitchen and stainless steel fabrication, lighting manufacturing, control cabinet construction, automotive parts, and general metal processing. SENFENG Germany has its own after-sales team and offers installation, commissioning, operator training, and technical service. In addition, a local spare parts warehouse is available in Germany to enable rapid service support and reduce potential downtime. The SF1530NP 6kW is a practical solution for customers looking for a compact design, safe operation, reliable cutting quality, and professional local service.

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: D08L/8493, Offer Number: D08L/8493 Machinetype: straightening and cutting machine Make: STOLLBERG Type: UDARA10 Constr. year: 1980 diameter range: 3-10 mm cutting length: 1000 mm Itedszd U S Hjpfx Aa Ijh speed - meters/min: 22-71 Location: In our warehouse

Condition: new, thread dia. bis M 36 turning speeds max. 150 U/min Iedpfx Aey Umd Esa Ieth thread M5 - M36 working area 2050 Rmax. work height max. 900 mm table surface area 700 x 900 mm oil volume 100 l engine output 4.0 kW weight - pallet system 320 kg equipment: - electro-hydraulic tapping machine - Large working range (max. radius 2050 mm) * Smooth swivel movement, e.g. due to built-in gas pressure dampers - Mobile machine base frame * Oil tank hydraulic unit integrated in the base frame * Hydraulic pressure gauge - Vertical / horizontal thread cutting possible - Connection cable with 16A plug * Special accessories included in the scope of delivery : - Tap quick-change inserts according to "DIN 376" . M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M 22 . M27 / M30 / M33 / M36 - Infinitely variable speed adjustment incl. digital display - Minimum quantity lubrication (spray oiler/compressed air) - T-slot clamping table - Tapping head can be fixed with magnetic quick-action insert

Condition: new, thread dia. bis M 24 turning speeds max. 280 U/min thread M5 - M24 working area 2050 Rmax. work height max. 900 mm table surface area 700 x 900 mm oil volume 100 l engine output 3.0 kW weight - pallet system 280 kg Equipment: - electro-hydraulic tapping machine - Large working range (max. radius 2050 mm) * Smooth swivel movement, e.g. due to built-in gas pressure dampers - Mobile machine base frame * Oil tank hydraulic unit integrated in the base frame * Hydraulic pressure gauge - Vertical / horizontal thread cutting possible - Connection cable with 16A plug Itsdpfoy Umdljx Aa Ijh * Special accessories included in the scope of delivery : - Tap quick-change inserts according to "DIN 376" . M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M22 - Infinitely variable speed adjustment incl. digital display - Minimum quantity lubrication (spray oiler/compressed air) - T-slot clamping table - Tapping head can be fixed with magnetic quick-action insert

Condition: new, Year of construction: 2026, Laser power: 12000 Watt Working range laser: 3048 x 1524 x 280 mm simultanious: 150 m / min Max. positioning accuracy X,Y axis: 0,05 mm Max. steel: 30 mm Max. stainless steel: 25 mm Max. aluminium: 25 mm Iodpfx Aajyz Iu Sj Ioth Max. brass: 20 mm Max. copper: 10 mm Max. workpiece weight: 1500 kg Length: 8960 mm Width: 2720 mm Height: 2400 mm Machine weight: 5900 kg Electrical connected load: 62 kW

Condition: new, Year of construction: 2025, Laser power: 12000 Watt Working range laser: 3048 x 1524 x 280 mm simultanious: 150 m / min Max. positioning accuracy X,Y axis: 0,05 mm Max. steel: 30 mm Max. stainless steel: 25 mm Max. aluminium: 25 mm Max. brass: 20 mm Max. copper: 10 mm Max. workpiece weight: 1500 kg Ijdpfxov U A I Is Aa Ijth Length: 9500 mm Width: 4200 mm Height: 2600 mm Machine weight: 5300 kg Electrical connected load: 60 kW

Condition: new, Year of construction: 2026, Laser power: 12000 Watt Working range laser: 3048 x 1524 x 280 mm simultanious: 150 m / min Itedjzcum Nopfx Aa Ijh Max. positioning accuracy X,Y axis: 0,05 mm Max. steel: 30 mm Max. stainless steel: 25 mm Max. aluminium: 25 mm Max. brass: 20 mm Max. copper: 10 mm Max. workpiece weight: 1000 kg Length: 8960 mm Width: 2720 mm Height: 2400 mm Machine weight: 5900 kg Electrical connected load: 36 kW

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, input voltage: 230 V, warranty duration: 24 months, DGUV certified until: 07/2028, type of input current: AC, total length: 440 mm, total width: 1,700 mm, total height: 470 mm, control voltage: 24 V, input frequency: 50 Hz, space requirement height: 470 mm, space requirement length: 440 mm, space requirement width: 1,700 mm, Cutting LEO with extended infeed conveyor Pretzel Bun Baguette - Schneider Tabletop unit made of stainless steel Knife height adjustable for average Belt speed adjustable DGUV V3 tested Connection 230 / 240V, 50 Hz, ready to plug in Passage width / height 140/90 mm Dimensions (WxDxH) in mm: 1700 x 440 x 470 NEW machine With guarantee optional: - Mobile table for LEO - Cutting - freight costs Isdpfx Aof Epwvsa Ioth - Shipping wooden crate VISIT our sales center with bakery equipment and many bakery machines

Condition: reconditioned (used), Year of construction: 1994, functionality: fully functional, cutting width (max.): 1,370 mm, BM5164 P137 EMC MON - refurbished EM electronic Monitor display LMS (Length Measuring System) => NEW swivel and tilt saddle Fixomat 6-channel light guards two hand safety cutting back table guarding optical cutting line indication Itsdpfx Aajy Spl Tj Ish air table slot cover at back table side tables (2) adjustable hydraulic pressing 2 knives, documentation, el. diagrams, tooling Electric: 380V / A 12.3 / 50 Hz / 3 cycles ----- Additional periphery available at extra costs - separate standing paper-lift - Unloader-Stacker TR130-ER-4 =>BM5134 - Paper Waste Disposal System =>BM5018 - Paper Jogger RA-B-5 =>BM5149