Used Wire Comb Binding Machine for sale (88,734)

Condition: repair required (used), Thermal Binding Machine PLANAX COPY BINDER 2 Needs repair: Error code AC13. It is a mechanical fault. A motor continues to run (although it should stop) after the binding process. The heating circuit appears to be functioning correctly. Sheet capacity: 5 – 330 sheets Format: Mainly up to DIN A4 (according to binding strip length) Machine dimensions approx.: 355 × 588 × 283 mm (D×W×H) Ljdpfx Aaoxuicus Esta Weight: approx. 21 kg Power supply: 230 V, 50 Hz, 400 W Warm-up/binding time: Previous model: Warm-up time approx. 6 min; Operating temperature approx. 143°C Materials & consumables: Uses Copy Strips – thermal binding strips made of 100% linen structure, available in various widths and colors. Manual unfortunately not available. Price negotiable. Offers are welcome.

Condition: ready for operation (used), functionality: fully functional, Technical Data – SENY D75B: Rolling Pressure: 220 kN Workpiece Diameter: min. 3 mm – max. 70 mm Maximum Pitch: 6 mm Maximum Groove Pitch: 2.25 mm Maximum Roll Width: 160 mm Roll Diameter: min. 133 mm – max. 170 mm Ltsdpexm Stgsfx Aa Eea Roller Shaft Rotational Speeds: 24 – 30 – 38 – 45 – 62 – 72 – 90 – 114 rpm Roll Holder Shaft Diameter: 54 mm standard – 69.85 mm special Distance Between Shafts: min. 135 mm – max. 230 mm Working Stroke: max. 15 min Feed Rate: 0.5 mm/s – 6 mm/s Rolling Time: 0.1 s – 100 s Pause Time: 0.1 s – 100 s Main Motor Power: 5.5 kW Electrical Consumption: 8.6 kW Reservoir Capacity: 130 liters Weight: approx. 2,100 kg. Additional rolls available: M4.5 x 0.75 ISO. M6 ISO. M10 ISO.

Condition: repair required (used), Manufacturer: FANUC Tip: A04B-0221-B201 The condition of the machine is unknown, it does not work, it is for sale in this condition, !!! Ltsdpfx Ajik Hb Tja Esa We do not know what is the probleme!

Condition: used, Year of construction: 2004, Working range 1.050 x 650 x 250 mm max. workpiece weight 400 (800) kg control Agievision AGIE max. conicity 30° / 100mm travel -x axis 500 mm travel -y axis 350 mm travel -z axis 426 mm travel U x V-axis mm rapid traverse X-axis 3 m/min rapid traverse Y-axis 3 m/min rapid traverse U-axis 0,6 m/min rapid traverse V-axis 0,6 m/min rapid traverse Z-axis 0,6 m/min wire dia. 0,2...0,33 mm total power requirement 12,1 kVA weight of the machine ca. 3,9 t dimensions of the machine ca. 2,8 x 2,4 x 2,3 m Wire Eroding Machine AGIE - Agiecut Progress 3 Ltodpfx Aew Spa Noa Eea

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, GF AgieCharmilles Progress VP3 Year of manufacture: 2009 Travel paths: X= 500 mm, Y= 350 mm, Z= 426 mm U/V axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (submerged) / 800 kg (out of tank) Achievable surface quality: Ra: 0.20 µm Maximum cutting speed: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged wire EDM machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Including AGIEJOGGER handbox for convenient setup AGIE IPG-V generator AGIEVISION 5 control unit Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3460 kg Ltodjxggdmspfx Aa Eoa The machine is cleaned and fully overhauled after receipt of order. You will receive a 6-month warranty on all machine parts. We are also happy to offer commissioning and training services.

Condition: excellent (used), Year of construction: 2018, operating hours: 9,600 h, functionality: fully functional, Muller Martini Pantera Year : 2018 Mod: 1577.0404 Ljdpoxp N Srefx Aa Ejta Excellent condition, Only 9600 hours worked! Equipped with: 8 station MM 3692 gatherer hand feed M.M. ‘ASAC’ calliper control Spiral raceway element EVA spine glue pre-melt tanks Hotmelt spine glue unit Hotmelt side glue unit Nipping station Lay-down delivery unit to conveyor system Muller Martini 3676 Granit Location : France

Condition: used, Year of construction: 1999, functionality: fully functional, Fully functional machine. Viewable at our Semsales premises from mid-June. Ledpfewmw I Sox Aa Eota

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, FANUC alpha - O I B machine travels: X 320, Y 220, U 120, V 120, Z 180 automatic wire threading can be seen in good working condition Ltsdpfoxf I D Ejx Aa Eja year 2002

Condition: used, Year of construction: 2003, The binding machine is suitable for binding long bar materials, long joined materials and materials with elastic or simple plastic wire. Ltodpfsvyhmtsx Aa Eja Long materials can be pushed through a tunnel in the middle of the machine. The binding machine can bind long materials together by knotted loops. Dq98On The machine is suitable for binding single and double strings. The binding machine can add any number of loops to long materials. The elastic cord keeps the joined materials together during transport.

Condition: used, Year of construction: 2004, Working range 1.050 x 650 x 250 mm max. workpiece weight 400 (800) kg control Agievision AGIE max. conicity 30° / 100mm travel -x axis 500 mm travel -y axis 350 mm Ltodpfx Aajw Spbte Esa travel -z axis 426 mm travel U x V-axis mm rapid traverse X-axis 3 m/min rapid traverse Y-axis 3 m/min rapid traverse U-axis 0,6 m/min rapid traverse V-axis 0,6 m/min rapid traverse Z-axis 0,6 m/min wire dia. 0,2...0,33 mm total power requirement 12,1 kVA weight of the machine ca. 3,9 t dimensions of the machine ca. 2,8 x 2,4 x 2,3 m Wire Eroding Machine AGIE - Agiecut Progress 3

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, GF AgieCharmilles CUT 400 Year of construction 2011 Control Charmilles Millenium Travels (X / Y / Z): 800 x 550 x 510 mm Travel (U / V): 800 x 550 mm Max. Taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3000 kg Cutting speed of 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Incl. option for large wire reel with 25 kg (K250) Dimensions of the complete system: 2670 x 2870 x 2645 mm Total weight of the system: 6300 kg Ledjuuz Iispfx Aa Esta The machine is cleaned, overhauled and tested for all functions by us after receipt of order. Optional: - Commissioning of the machine on your premises - Training on site - Cooling unit - Transportation - Clamping bar set

Condition: reconditioned (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 06F2S765, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, The machine is currently serviced and in good condition. The wear parts have been extensively replaced. The EDM machine has barely been used in the last four years. Transport, installation and operator training can be organized at an additional cost. Ltedpjwtd Edjfx Aa Eja

Condition: refurbished (used), Year of construction: 2007, operating hours: 15,125 h, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, total height: 200 mm, total length: 260 mm, total width: 280 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, type of input current: three-phase, overall weight: 3,300 kg, Charmilles Robofil 440SLP, 2007. Ljdpfx Ajv Rbxwja Eota Only 15,100 hours of work. Machine fully serviced and working. Viewable at our Semsales premises in Switzerland.

Condition: good (used), functionality: fully functional, This hammering machine is a model for processing wires. The wire was sharpened on this machine. The machine has been partially overhauled. The mechanical hammer drive was completely dismantled, reworked, greased and reinstalled. The outer parts of the machine were partially refurbished. However, the electrics are old but fully functional. The motor has also been refurbished and is 1.5 KW. The machine has a hammering tool for wire sharpening included, wire diameter up to 1.5 mm. The name of the machine is unknown, but we assume it is an HMP or Felss. Ltedpfjrqfxwox Aa Esa

Condition: used, Year of construction: 2004, The binding machine is suitable for binding long bar materials, long joined materials and materials with elastic or simple plastic wire. Long materials can be pushed through a tunnel in the middle of the machine. The binding machine can be used to bind long materials together using knotted loops. Ltedpfjvyhl Nox Aa Eea The machine is suitable for binding single and double strings. The binding machine can be used to attach any number of loops to long materials. The elastic cord holds the joined materials together during transport.

Condition: like new (used), Year of construction: 2018, operating hours: 2,700 h, functionality: fully functional, machine/vehicle number: MR24D1056, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 295 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 800 mm, empty load weight: 3,500 kg, tank capacity: 860 l, Equipment: documentation/manual, For sale: Precision wire EDM machine Mitsubishi MV2400R (year 2018) in excellent technical condition, currently in continuous operation, fully functional and ready for work – very low hours (2,700 spindle hours). Technical data: Year of manufacture: 2018 Manufacturer: Mitsubishi Electric Model: MV2400R Control system: Mitsubishi M700 series Axis travel: X = 600 mm, Y = 400 mm, Z = 310 mm Max. workpiece dimensions: 1,050 × 800 × 295 mm Max. workpiece weight: 1,500 kg Table size: 840 × 700 mm Wire diameter: 0.1 – 0.3 mm (currently using 0.25 mm) Positioning accuracy: ±1 μm Complete power supply and cooling system – fully operational Machine dimensions: 2,687 × 3,030 × 2,150 mm Ltodpfxjxu Hvls Aa Eea Weight: approx. 3,500 kg Equipment and accessories: Original upper and lower wire guides Automatic Wire Threading (AWT) Filtration tank with ion-exchange resin Full set of locating fixtures and base devices (in a case) Wire vertical alignment tool Original documentation and operation manuals Additional equipment purchased for over PLN 40,000: Angular cutting wire guides – upper and lower, 30° Processor battery Precision vise for workpiece clamping Pressure gauge 0–600 PSI – 2 pcs MV power contactor (259320) – 2 pcs CF card with software EDM wire 0.25 mm – 3 new spools 2 sets of new filters Machine transport and handling system Machine condition: Well-maintained, serviced regularly, ready for immediate operation. Complete filtration and cooling systems included. We can assist with transportation, installation, commissioning of the machine, and provide operator training – we have EXPERIENCE. Price negotiable. VAT invoice issued.

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, GF MachiningSolutions CUT E350 Year of manufacture: 2017 Control: AC CUT HMI Travel distances (X/Y/Z): 350 x 250 x 250 mm Travel distances (U/V): +/- 45 mm Taper: +/- 30° at 77 mm height Workpiece dimensions: 820 x 680 x 250 mm Max. workpiece weight: 400 kg Collision protection on X/Y/Z axes Best surface finish on carbide/steel: 0.12/0.18 µm Maximum cutting speed: 300 mm²/min Overall dimensions: 1750 x 2470 x 2200 mm Ledjxbzimepfx Aa Eeta Total weight: 2525 kg The machine is cleaned, overhauled, and tested by us after receiving your order. We are happy to perform a test cut tailored to your needs. Optional services: - Commissioning and training - Transport - Warranty - Cooling unit

Condition: used, Year of construction: 2006, travel -x axis 450 mm travel -y axis 300 mm travel -z axis 320 mm travel -u axis +/- 50 mm travel - v +/- 50 mm control MGW-S3 positioning accuracy +/- 0,015 mm repeatability +/- 0,015 mm table dimension (L x W) ~ 580 x 730 mm max. size of workpiece LxWxH ~ 730, 580, 300 mm max. workpiece weight ~ 800 kg Overall size ~ 3.100 x 3.100 x 2.300 mm weight of the machine ~ 3.400 kg Wire Eroding Machine | MAKINO - EU43 Lsdpfx Aajvzcn Io Ejta The machine is in a well-maintained condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: EU 43 | EU-43

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 525 mm, workpiece height (max.): 510 mm, workpiece width (max.): 1,000 mm, workpiece length (max.): 1,300 mm, type of input current: three-phase, overall weight: 6,800 kg, Agie Progress V4. Machine available for viewing at our Semsales premises at the end of June. Machine cleaned, serviced, and tested, fully functional. This machine is available for viewing and testing at our premises. Ljdpfowq U I Dsx Aa Ejta

Condition: excellent (used), Year of construction: 2017, travels: x 400 mm Ltsdpjm Uyuxjfx Aa Eja y 300 mm z 220 mm Wear-free tubular direct drive Water bath incl. cooler Automatic wire threading

Condition: good (used), Year of construction: 2004, The binding machine is suitable for binding long bar materials, long joined materials and materials with elastic or simple plastic wire. Long materials can be pushed through a tunnel in the middle of the machine. The binding machine can be used to bind long materials together using knotted loops. Ltjdpjvyhhqofx Aa Eoa The machine is suitable for binding single and double strings. The binding machine can be used to attach any number of loops to long materials. The elastic cord holds the joined materials together during transport.

Condition: ready for operation (used), Technical characteristics 4 hot wire bending heads useful length 2000 mm PMMA and methacrylate folding with a thickness of 1 mm to 20 mm adjustment of the gap between the wires 3 wires above / below per group Ltjdpfx Aajtv Tipo Esa Power and Motors Overall dimensions

Condition: not inspected (used), Year of construction: 2002, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 220 mm, table width: 515 mm, table length: 640 mm, Wire EDM machine Chmer EDM Type: CD 305G X-path: 400 mm Y-path: 300 mm X-path: 220 mm bed: 515 x 640 mm Ltjdpfxjqgcims Aa Eea Year of construction: 2002 Hours: 16333 Including documentation and parameters Dimensions: 245x200x203 cm LxWxH

Year of construction: 2001, condition: good (used), Travel X / Y / Z: 220 x 150 x 150 mm Z-axis device: standard equipment (= 5th axis) Ltjdpfog Icdyox Aa Eea Max. taper angle: 15° (for workpiece 100 mm thick) Taper machining unit: standard equipment (= 3rd and 4th axis) Wire diameter: 0.03 - 0.25 mm dimensions L x W x H 1900 x 2345 x 2060 mm Weight 3500 kg Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 2005, operating hours: 27,000 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, empty load weight: 2,500 kg, Equipment: documentation/manual, Machine in excellent condition. Ltsdsv Im R Tepfx Aa Eea Machine already cleaned. Sold as is or revised on request. Machine visible in our premises in Semsales in Switzerland.