Used Wire Bending Machines for sale (66,178)

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 426 mm, workpiece height (max.): 420 mm, workpiece width (max.): 650 mm, workpiece length (max.): 1,050 mm, GF AgieCharmilles Progress VP3 Year of manufacture: 2011 Travel paths: X= 500 mm, Y= 350 mm, Z= 426 mm U/V-axis travel paths: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (in the water tank) / 800 kg (without tank) Achievable surface quality: Ra: 0.20 µm Maximum cutting speed: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged wire-cut EDM machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side only) Including AGIEJOGGER handbox for convenient setup Cgjdpfxox Sxa Tj Agfju AGIE IPG-V Generator AGIEVISION 5 CNC control Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3,460 kg The machine will be cleaned and fully overhauled after receipt of your order. You will receive a 6-month warranty on all machine parts. Commissioning and training services are also available on request.

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, AGIECUT Classic 2S Year of construction 2006 Travels: X= 350 mm, Y= 250 mm, Z= 256 mm Travels U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in bath) / 450 (without bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.20 - 0.33 mm Water bath machine with automatic wire threading and rethreading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER handbox for convenient set-up AGIE IPG generator AGIEVISION control unit Cgedpfx Aouzvkgogfsu Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and overhauled after receipt of order. A test cut with the best surface finish is then carried out for acceptance. You receive a 6-month warranty on the machine. We are happy to offer you commissioning and training on site.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Challenge V2 Year of construction 2007 Cedpfx Ajwqcm Usgfjgu Travels (X/Y/Z): 350 x 250 x 256 mm Travels (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface: 0.2 µm Ra Available wire diameters 0.10 - 0.33 mm Incl. AGIE universal clamping frame Incl. AGIE JOGGER handbox Incl. console with USB connection The machine will be cleaned, overhauled and tested by us upon receipt of order. We are also happy to offer commissioning and training.

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 525 mm, GF AgieCharmilles Progress V4 Year of manufacture: 2008 Travel paths: X= 800 mm, Y= 550 mm, Z= 525 mm Travel paths: U= 800 mm V=550 mm Maximum taper: 30° at 500 mm height Maximum workpiece dimensions: 1300 x 1000 x 510 mm Maximum workpiece weight: 3000 kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 500 mm²/min Cjdpfjwvqwrsx Agfsgu Available wire diameters: 0.15 – 0.33 mm Submerged-type machine with automatic wire threading and re-threading after wire breakage With automatic front door Includes AGIEJOGGER hand-held box for convenient setup AGIE IPG-V generator AGIEVISION 5 control Dimensions (length x width x height): 2900 x 3050 x 2850 mm Net weight: 6000 kg The machine will be cleaned and overhauled upon receipt of your order. You will receive a 6-month warranty on all machine components. We are also happy to offer commissioning and training services.

Year of construction: 2005, condition: refurbished (used), AGIECUT Progress 3 Cgsdpfsgzv Scsx Agfeu Year of manufacture 2005 travels: X= 500 mm, Y= 350 mm, Z= 426 mm travels U/V-axis: +/- 70 mm maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 (in bath) / 800 (without bath) kg Achievable surface quality: Ra: 0.30 µm Maximum cutting rate: 500 mm²/min Glass scales on X- and Y-axis for increased precision Available wire diameters: 0.20 - 0.33 mm Water bath machine with automatic wire threading and rethreading after wire breakage Maximum threadable height: 420 mm With manual front door (accessible from 1 side) Incl. AGIEJOGGER- hand box for comfortable set-up AGIE IPG high performance generator AGIEVISION control system Dimensions (length x width x height): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine will be overhauled and extensively tested by us You get 6 months warranty on the machine. We are also happy to offer you commissioning and training

Condition: good (used), Year of construction: 1985, FOR SALE: Automatic Stamping and Bending Machine BIHLER RM-30 Cgjdpfey Shgpox Agfsu High-performance equipment for the automatic production of complex metal parts from wire or strip material. Identification and Brand Brand: BIHLER (Otto Bihler Maschinenfabrik, Germany). Model: RM-30. Year of manufacture: 1985. Machine number: 23589. Technical Specifications (Model RM-30) Maximum strip width: 32 mm. Maximum wire diameter: 3 mm (mild steel). Feed length (standard): Up to 120 mm. Nominal press force: 70 kN (7 tons). Production speed: Adjustable, up to 350 parts/minute (depending on complexity). Number of slides: Up to 5 standard bending units. Equipment and Configuration Control system: Separate control panel with user interface. Kinematics: Radial cam drive for maximum precision and repeatability. Press unit: Integrated for cutting, punching, or marking operations prior to bending. Safety: Machine equipped with protective guards and emergency stop. Advantages Versatility: Enables the production of highly complex parts in a single cycle. Bihler reliability: Renowned worldwide for robust construction and long-lasting mechanical components. Precision: Ideal for the electronics, automotive, and connector industries.

Condition: ready for operation (used), Year of construction: 1996, Pressing force: 20 t for pipe diameter: 3/8; 1/2; 3/4; 1; 1 1/4 and 1 1/2 and 2" Hydraulic drive: 380 V, 0.55 kW Space requirement: 750 x 650 x 900 mm (height) Weight: 170 kg Cedpfxey Uv Dno Agfegu

Condition: used, functionality: fully functional, We currently have a Roundo bending machine available for sale. This machine is capable of bending large-size wide-flange beams — even when cold — into radii or cambered shapes. It is a robust and versatile unit, ideal for companies looking to enhance or expand their steel-forming capabilities. Cjdpsxn I Rwjfx Agfjgu

Condition: good (used), Faceplate bending machine, profile bending machine, bending machine, angle bending machine, pipe bending machine, ring bender, ring former -Diameter of faceplate: 1330 mm -Clamping disc diameter: 775 mm Cjdpofg Th Aofx Agfogu -For an additional charge: other round shapes can be produced -Geared motor power: 1.5 kW -Speed: 86 rpm -Dimensions: 2440/1330/H1400 mm -Weight: 1420 kg

Condition: new, functionality: fully functional, Year of construction: 2021, For sale: Brand new, never-used DAVI bending machine. *MAIN FEATURES MCP 18* *1. Type and Capacity* - *3 hydraulically driven rollers*, pyramid configuration Cgjdpfx Agey N Rbwsfou - *Shafts Ø 180 mm* → this is the "18" in MCP 18 - *Bending*: round, square, rectangular tubes, angles, flat bars, UPN, IPE, HEA... all b235 profiles *2. Indicative capacities on MCP series* DAVI does not provide the exact MCP 18 datasheet online, but for the equivalent MCP range: Profile Approx capacity MCP 18 Round tube Ø 6" to 8" depending on wall thickness Solid square 80x80 mm to 100x100 mm Angle 120x120x12 mm UPN UPN 200 - 240 IPE flat flange IPE 200 - 240 Actual figures depend on wall thickness and steel grade. The 18 cm Ø shafts make this a mid/high-category machine. For all available options, please refer to the photo in the listing.

Condition: used, Year of construction: 1986, tube diameter 4-20 mm wall strength 2 mm bending radius min. 10 mm bending radius max. 75 mm Cgsdpfx Ajwbi Hcjgfeu bending speed 35 mm/min pull up length of tube 2000 mm total power requirement 7,5 kW weight of the machine ca. 1,1 t dimensions ca. 3100x1000x1400 mm

Condition: used, Max. bending length: 2040 mm Max. sheet thickness: 6 mm steel Upper beam stroke: 350 mm Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Mechanical adjustment of the bending arm with digital display (setting of sheet thickness) Cjdjy T H N Sepfx Agfogu Manual rear stop with spring fingers up to 1500 mm 5700 kg

Condition: good (used), Year of construction: 2000, Technical specifications: Working width: 6100 mm Max. bending capacity: 10.0 mm Max. bending angle: 8.0 mm Diameter of upper roller: 470 mm Diameter of side rollers: 250 mm Hardened rollers Cedozbmw Dopfx Agfogu Conical bending unit through angled positioning of the two side rollers Mobile control panel Hydraulic folding bearings Motor power: 31 kW Dimensions (length x width x height): approx. 8000 x 3200 x 2900 mm Weight: approx. 30 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Technical specifications: Retrofit in 2026 Working length: 2550 mm Max. bending capacity: 6.0 mm Bending allowance: 4.0 mm Diameter of upper roller: 200 mm Diameter of lower roller: 180 mm Hydraulic folding bearing Taper bending device Control panel with digital display Motor power: 5.5 kW Dimensions (length x width x height): approx. 3600 x 1150 x 1250 mm Weight: approx. 4.5 tons Cgodpfx Agszbcwmjfsu Condition: Very good, retrofit in 2026 The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 1988, Press brake, bending machine, swing bending machine, die bending machine -Handover: in its current condition as inspected -Function: Manual operation (no automatic operation) -Manufacturer: RAFAMET Swivel bending machine type KM-4 -Drive: mechanical -Max. working width: 2020 mm Cedpfsv Tpxqsx Agfegu -Max. sheet thickness: 4 mm -Stop depth: 750 mm -Connected power: kW -Dimensions: 3350/1540/H1510 mm -Weight: 3900 kg

Condition: used, total length: 1,000 mm, total width: 750 mm, total height: 1,400 mm, Colour: Grey Empty weight: 400 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 3 - Power [kW]: 1.5 - Shaft diameter [mm]: 50 - Moment of resistance [cm³]: 6 - Top roll diameter [mm]: 50 - Bottom roll diameter [mm]: 50 - Capacity diameter round [mm]: 35 - Transport dimensions: 1000mm x 750mm x 1400mm (l x w x h) - Transport weight [kg]: 400kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Cjdjypk Ebjpfx Agfjgu Lukas van Rossum

Condition: used, functionality: fully functional, control type: manual, 3-Roll Round Bending Machine 2500 x 16 mm, hydraulic Manufacturer: KUMLA Type: PV 7 H Serial Number: 804, overhauled in 1987 The machine has a very robust design and was only used for single-layer bending. Max. bending length: 2500 mm Max. sheet thickness: 16 mm Taper bending device Upper roll diameter: 324 mm Lower roll diameter: 305 mm Hydraulic roll adjustment Dimensions: Codpjzba Atjfx Agfogu L x W x H = 5000 x 1600 x H 1900 mm Working height: 1000 mm Additionally, a platform can be purchased for use around the machine.

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 2 mm steel Oberwange swivelable Bending angle adjustable via potentiometer Lift height preselectable via scale Manual and automatic bending mode possible Cedpfjq T Ud Sox Agfsgu Weight: approx. 650 kg

Condition: used, Year of construction: 2005, operating hours: 18,950 h, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, Wire Diameter 0,1-0,3 mm Automatik Threading Working Hours 18950 Std Verfahrwege X 350 mm Y 220 mm Cgsdpswzyvhofx Agfju Z 220 mm U 350 mm V 220 mm Year 2005

Condition: good (used), functionality: fully functional, 3-Roll Bending Machine Manufacturer: FERRO S.R.L. Model: CIT - 1 Cedpfx Aeza Sxdsgfegu Working area: 2000 x 6 mm Hydraulic tilting support for workpiece change Control panel Bdsbmm Aveyw S E He Euoc Emergency stop via cable pull Condition: good / ready for immediate use

Condition: good (used), Year of construction: 1999, overall weight: 2,900 kg, total length: 1,800 mm, total width: 1,900 mm, total height: 2,200 mm, Length:1800mm Width:1900mm Cgjdpoycu E Esfx Agfsu Height:2200mm Weight:2900kg

Condition: excellent (used), Year of construction: 2013, controller manufacturer: ELFRAN Digital Read Out, number of rollers: 3, shaft diameter: 130 mm, overall weight: 5,800 kg, total length: 2,200 mm, total width: 2,400 mm, total height: 2,000 mm, Profile bending machine FACCIN - RCMI 130 MACH-ID 9451 Make: FACCIN Type: RCMI 130 Control: ELFRAN Digital Read Out Year: 2013 3 rolls driven 2 lateral guide rolls Digital readout for position rolls Set hardned universal rolls Set hardned profile rolls Cgodpfx Ageyrq Dvofeu Horizontal and vertical:|Horizontal and Vertical Shaft Ø: 130mm Number of rolls: 3 Capacity flat: 240 x 30 x 1000mm Capacity Tube: 140 x 5 x 1500Ø x mm Capacity bar: 80 x 80 x 900mm Capacity T-Profile: 140 x 15 x 1400mm Capacity HEA-Profile: 160 x 1700mm Working speed: 0 - 6000mm/min. Side supports: 2 x Hydraulic side arms Length: 2200mm Width: 2400mm Height: 2000mm Weight: 5800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), profile bending machine Codpfxewtph Do Agfsgu

Condition: excellent (used), Year of construction: 2008, control type: CNC control, controller manufacturer: ESA TOUCH PANEL, pipe length (max.): 4,000 mm, bending radius (max.): 180 mm, bending radius (min.): 10 mm, overall weight: 3,700 kg, total length: 6,000 mm, total width: 1,800 mm, total height: 1,800 mm, Tube bending machine Transfluid - DB630 A3 CNC MACH-ID 9616 Make: Transfluid Type: DB630 A3 CNC Control: ESA TOUCH PANEL Year: 2008 Max.Tube Ø: 30mm Min. Tube Ø: 4mm Max. Wall thickness:4mm Max. Bending radius:180mm Min. Bending radius:10mm Codpfx Agey N Rv Ijfegu Max. bending length:4000mm 3e dimsion bending:Yesmm/min. Number of tools: 10,12,15,16,18,20,22,28 Length: 6000mm Width: 1800mm Height: 1800mm Weight: 3700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Manufacturer: Tracto Technik Type: TUBOMAT Year of construction: 1996 Pipe bending machine with electric control, 4-fold bending angle pre-selection and digital display Hydraulic bending drive operated by hand lever valve Hydraulic bending drive, operated by hand lever valve Follower-type pressure die (sliding guide) Hydraulic mandrel retraction Pipe circular saw with coolant lubrication and automatic feed Pipe deburring unit for internal and external deburring Hydraulic power unit as basic seating for attaching a cutting ring assembly or flaring device Machine mobile and flexible to use Specifications Metric US Standard Cjdet Dk Ukepfx Agfegu Max. Product Ø 42 mm Min. product Ø 6 mm Max. Wall thickness 3 mm Max. Bending radius 5 mm Min. bending radius 180 mm Max. Bending length 2000 mm Deburring device Yes Sage device Yes Flanging device Yes Dimensions (estimate) Length 3500 mm width 1000 mm height 1200 mm weight 1000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.