Used Wire Bending Machine for sale (66,330)

Year of construction: 1984, condition: good (used), Bihler RM 40 (1984) - Multislide punching stamping bending former Machine is shown with 5 slides, however, a 6th one is available. Several pay-offs for strip or for wire are available. Machine with 8-tons press and 5 or 6 slides - hydraulic clamping for wire or strip. One machine if fitted with a additionnal feeding system from the back of the machine, thru the center hole Dedpfx Aeh T Ulyjb Aekw

Condition: ready for operation (used), Year of construction: 2021, operating hours: 12,600 h, functionality: fully functional, machine/vehicle number: P4M_812_3228, working range: 2 mm, overall weight: 13,000 kg, total height: 2,320 mm, type of input current: three-phase, total length: 4,000 mm, total width: 2,210 mm, input frequency: 50 Hz, input voltage: 400 V, input current: 23 A, table length: 2,180 mm, Panel Bender SALVAGNINI P2 LEAN -2120, manufactured at the end of 2021. Software: MAC 2.0 First start-up: January 2022 Dsdpfx As Aigm Deb Ajkw Low number of operating hours. Fully functional, with all documentation (layout, certification, quotation, etc.) available. Prepared for shipment by SALVAGNINI, with a report provided.

Condition: used, Year of construction: 2001, functionality: fully functional, Profile Bending Machine SAF Curvatrici (TUWI) DS 60 HV – Top Condition & Huge Tool Package Description: For sale is a high-quality profile bending machine, type SAF Curvatrici (TUWI) DS 60 HV, from the first owner. The machine was purchased new by us in 2001 and has been in our possession ever since. It is fully operational and can be demonstrated under power after prior consultation. Special highlight – Modernized control system (08/2019): The control system was completely overhauled and modernized by a specialist company in August 2019. Now, 10 different feed sequences can be programmed. After a programmed value is reached, the next value is automatically approached by pressing the button again (value input in ascending order). Technical data & equipment: • Shaft diameter: 50 mm (for all three axes) • Acceptance height: 115 mm • Additional equipment from factory: 2 RCD correction rollers for bending angle iron (R/L). The original, lateral and height-adjustable shafts (38 x 250 mm) are also included. • Special modification for transport: Specially manufactured base frame for transport including four height-adjustable support plates. • Additional device for angle iron: A 10 mm thick plate was mounted on the top side. An additional hydraulic cylinder can be attached here, which pushes the vertical flange extremely close to 90° during bending (adjustable pressure depending on the angle). Note: The cylinder is not included in the standard price, but can be requested separately. Enormous scope of supply (Extremely many tools included!): The biggest advantage of this offer is the extremely extensive tool package, which is completely included in the price: • Standard tools: Complete set according to the machine’s scope of supply • 18 different roller sets: According to the list from Ø 8 mm to Ø 33.7 mm • Special tools for angle iron (according to the list) • Special tools for flat steel (light & heavy axis) • Special tools for square and rectangular tubes • Special tools for diagonal square material Dsdpfx Aoz Ix Uksb Aokw • Documentation: Original operating manual is fully available Note: The machine will only be sold as a complete package together with the complete tool set according to the attached list. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The disassembly, loading and collection must be organized and carried out by the buyer himself or by a forwarding agent commissioned by him. Technical specifications according to available documents. Subject to prior sale.

Condition: new, Year of construction: 2026, sheet width 3100 mm plate thickness 9 mm pre-bending 6 mm diameter of upper rolls 220 mm diameter of lower rolls 200 mm side roll diameter 170 mm min. dia. 250 mm roll speed 6 m/min total power requirement 10,3 kW weight of the machine ca. 4651 kg dimensions of the machine ca. 4915 x 1120 x 1235 mm Features - Machines include the following DAVI standard specification: The components of the machine structure (machine stand, frame and swivel bearings, etc.) have been calculated and designed to withstand the loads required for the applications and performance levels. The robust and heavy-duty machine construction absorbs the loads generated during the bending process without transferring them to the foundation. - High-quality surface finish: For forming delicate surfaces and/or soft materials without leaving marks Hydraulic-mechanical parallelism system, supported by electronics for fine-tuning. There are two INDEPENDENT & SYMMETRICAL hydraulic circuits for the left and right cylinders of each roller. The oil flow is regulated by two DOUBLE PUMPS, which are mounted on the same motor shaft and are fully synchronised. The two symmetrical hydraulic circuits move the cylinders and supply the rollers with the SAME amount of oil in a fully synchronised manner. Electronic control is activated only for extremely precise fine-tuning. - Smooth transmission of the drive Both the hydraulic motors and the gearboxes (top and bottom) can follow the deflection of the roll Dksdpfsz Dxpmex Ab Ajw without load when bending narrow sheets. This ensures perfectly symmetrical deflection of the rolls under load. This system also allows the rollers to deflect freely, without the risk of breakage under excessive load. - ‘Roll-by-Wire’© digital technology Since 2004, DAVI has revolutionised the way sheet metal rollers are wired (similar to ‘fly-by-wire’ technology in the aerospace, FMS and automotive industries) and introduced ‘Roll-by-Wire’ technology. This allows the entire control system of the roller to be controlled via digital signals rather than, as was previously the case, via numerous relays and contacts. Digital technology is much faster and more reliable. Action Benefit Reduction in the number -> Reduction in potential of components component failures Very compact design -> Improved accessibility for maintenance work Improved accessibility for -> Damaged parts can be identified maintenance work more easily More reliable -> Greater accuracy thanks to the use of ‘digital signals’ Permanent lubrication technology The lever-arm feed system eliminates all linear friction during the movement of the side rollers, as the roller support arms, which house the bushings, rotate simply and smoothly around two large, strong pivot points made of alloy steel, ensuring precise and friction-free rotation. This guarantees reduced wear and safety during unlimited use. Further advantages of the lubrication-free lever-arm feed mechanism are: •NO daily maintenance required (lower operating costs). •More production time available. •The bearings are sealed to protect against scale, dust and rust - Hardened rollers •Excellent heat tre...

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, machine/vehicle number: 925674, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 2,000 mm, total length: 2,000 mm, total width: 1,700 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, table width: 450 mm, overall weight: 2,500 kg, table length: 680 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 18 A, controller manufacturer: AGIE CHARMILLES, nominal power (apparent): 10 kVA, GF AGIE CHARMILLES ROBOFILL 240 SLP wire erosion machine - Dimensions of the front door: 820 mm - Distance between floor and table: 1000 mm - Total volume of dielectric fluid: 760 l - Travel range of U-axis: 350 mm Dsdpfx Aj Afufgob Ajkw - Travel range of V-axis: 220 mm - Includes workbench with matching accessories FCA D-71679 Asperg - loaded onto a truck.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Fanuc Series 180iS-WB control system Travel ranges: X 320 mm, Y 220 mm, U 120 mm, V 120 mm, Z 180 mm Dkjdpfxjzvd Sae Ab Aow Max. workpiece weight: 500 kg Machine weight: 1,700 kg Power supply: 13 kVA The machine can be inspected while powered on.

Condition: excellent (used), Year of construction: 1998, Ref:11126 . 1998 Rilecart B-599 Automatic Wire Binding Machine A productive ‘Wire-O’ binding machine with speeds up to 4000 bindings per hour, able to bind a wide variety of book thicknesses using diameters from 5/16” up to 1 inch for a maximum binding thickness of 23 mm. Comprising; Hand feed position for the feeding of pre punched book blocks B599 Automatic closing unit with; Twin Spool wire unwinds system, with paper waste extraction, with automatic change over when spool is low / empty, which ensures consistently high production. Computer controlled programming of binding, from one length, skip feed, up to five lengths in one pass. Automatic wire cutter, toothed belts for different pitch, 3:1 and 2:1. Sprockets for 2:1 and 3:1 pitch. Capable of processing either round or square punched work. Speed adjustable up to 4000 bindings per hour, depending on format, thickness, operator skill, and the quality of work being bound. Dedicated wire guide, turning, closing tools for each diameter, with fast change over times possible due to easy to install methods for the tooling. Microprocessor controlled quality checking systems to ensure that production runs smoothly, with read out on the computer screen advising the operator and management of faults, and productivity information. Extended shingle belt delivery. A set of tools for all common sizes of wire from 5/16” up to 1”. Specification: B599 – Formats, Max. binding size: 400mm, Max. transport size: 500 mm Min. binding size: 100mm, Min. transport size: 80 mm Max. bind thickness: 23 mm, Min. 3 mm Max. binding wire diameter: 1”, Min. 5/16” Tooling included; 2:1" pitch - 1/2", 9/16", 5/8", 3/4", 7/8" & 1". Max. working speed: 4,000 books/hour. Djdpfx Aszmx Udeb Askw Electric supply: 3 x 380V. + neutral, 50 Hz. Power req. 8 kW. Compressed air supply (required): 8 Atm,10 mc/hour.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Equipment: cooling unit, documentation/manual, FANUC Robocut α-C400iB 31i WB HMI Complete with RENISHAW part probe Hammer for removing swarf Spatula for collecting swarf Robot interface for unattended machining Door with automatic (opening) descent • CNC Fanuc 31i-WB • Z-axis controlled by CNC • Wire driving unit with automatic threading AWF2 • 15” ‘touch screen’ display and portable keyboard • Automatic water level adjustment • Dielectric fluid filtration system • Fanuc cooling unit • Three-phase 380/220V 15 kVA transformer MANUALS TECHNICAL SPECIFICATIONS: Maximum workpiece size (mm)……………..……………730 x 630 x 250 Maximum workpiece weight (kg) ……………..………….500 Travel of X and Y axes (mm) ……………..……400x 300 Travel of Z axis (mm) ……………...…255 Travel of U and V axes (mm)…………….. ………..120 x 120 Maximum taper angle (°/mm)……………. 30°/80 Minimum incremental step of drives (mm)……………..……………..…0.0001 Wire diameter (mm)…………….……0.10/0.30 Maximum wire weight (kg)…………….……………..……………..……..16 Dodpfx Abs Ah T Rwj Aokw Footprint (W/D) (mm)…………….……………..1930 x 2330 Machine weight (approx.) (kg)…………….…………….1800 Control…………….……………..FANUC 31i-WB Program memory size (MB)…………….……………...4 Generator AC ……………..standard Pulse generator ……………fully transistorized Maximum cutting speed …………….330 mm2/min (brass wire Ø 0.3 mm) Minimum surface roughness …………….Standard 0.3 Ra (OPTIONAL 0.1 RA for superfine finishing) Dielectric system ……………..……………Deionized water Tank capacity (liters)…………….……………..……………520 Filters ……………2 paper filters Machine weight …………….1800 kg FANUC Robocut α-CiB Series 31i WB Machine features High precision: New high-rigidity structure with thermal insulation. Symmetrical pyramid structure with a wide base to eliminate load overhang Lower guide support with thermally isolated arm Tank with hermetic pre-closure device (patented) Servo control of the water level in the working tank (follows the position of the Z-axis) Transparent sealing plate in two partitions for easy inspection and maintenance Economic efficiency: Long service life of wear parts Low operating costs Minimum footprint for installation Energy consumption monitoring User friendly: Numerical control of the latest generation FANUC 31i WB 15” ‘touch sensor’ LCD screen with Teach pendant USB I/O for data and programs System features to increase machining speed and precision New concept Skim Cutting Power Supply SF2 generator for finishing with Ra 0.3µm on tool steels with a thickness of up to 60 mm Patented AIP2 (artificial intelligence) discharge pulse control High-speed servo control (direct and not through the CNC) Machining of variable thickness shapes optimized thanks to AIP2 pulse control

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, Concrete rebar bending machine / Bending machine B 50 – Exhibition model COMPLETE TECHNICAL SPECIFICATIONS – SEE PHOTO - CE marking - Incl. bending pins / stop / bending sleeves - Safety guard / end switch activated - Bending capacity max. 50mm / diameter (single bar) Dksdpfezvy S Nsx Ab Aew - Foot switch - Complete documentation - Bending via program or individual bends Dimensions: L x W x H 1.3 x 0.9 x 1 meter / Weight 600 kg Errors and omissions excepted.

Condition: used, Model: VL600Q Year of manufacture: 2018 Machine number: TO314 Machine type: CNC wire erosion machine Control system: Sodick LN2W Technical specifications X-axis: 600 mm Y-axis: 400 mm Z-axis: 270 mm U/V-axis: 80 × 80 mm Max. workpiece size: 990 × 670 × 265 mm Dkjdpfx Abs Aifmtj Asw Max. workpiece weight: 850 kg Max. taper angle: ±15° Wire diameter: 0.10–0.30 mm Work tank: approx. 1,040 × 780 mm Machine weight: approx. 3,140 kg Description For sale is a Sodick VL600Q CNC wire erosion machine, manufactured in 2018.

Condition: as good as new (ex-display), Year of construction: 2025, sheet width 1050 mm plate thickness 2.0 mm roll length 1070 mm roll diam. toproll 75.0 mm engine output 1.5 kW weight 325 kg range L-W-H 1530 x 700 x 1160 mm Exhibition machine - like NEW not yet in use (!!) Special price on request Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device Dksdpfx Aexacbuob Aow

Condition: as good as new (ex-display), Year of construction: 2025, sheet width 1250 mm plate thickness 1.5 mm roll length 1270 mm roll diam. toproll 75.0 mm engine output 1.5 kW weight 400 kg range L-W-H 1730 x 700 x 1160 mm Dkodpfxexaafde Ab Asw Exhibition machine - like NEW not yet in use (!!) Special price on request Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device

Condition: used, Year of construction: 1983, functionality: fully functional, machine/vehicle number: 54452, Wire erosion machine Charmilles P25 Dkedpfx Aez Nhwrob Aew Year of manufacture: 1983

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Max. pressing force: 360 kN Mounting height: 300 mm Clearance between columns: 932 mm Reach of the arms: 150 mm Working height: 1150 mm Working speed, Y-axis: 220 mm/s Maximum stroke of the Y-axis: 120 mm Dsdpo Aifyxofx Ab Aokw Inertial run time: max. 90 ms Minimum safety distance: 180 mm Return speed: 220 mm/s Speed of the X-axis: 1000 mm/s Speed of the R-axis: 330 mm/s Speed of the Z-axis: 1000 mm/s Positioning speed of the X-axis: 0.04 mm Positioning speed of the X-axis: 0.04 mm Positioning speed of the R-axis: 0.06 mm Travel range, X-axis: 240 mm Travel range, R-axis: 80 mm Space requirement: 1805 x 1330 x 2380 mm Machine weight: approx. 2,600 kg Total connected load: approx. 6 kVA Options: Rear backstop system, 6 axes Upper and lower tool clamping, hydraulic Comfortable support table in front (foldable) Comfortable footrest Work area lighting in front (LED) & in the back Swiveling control unit BendGuard safety device (with blocking laser) Ergonomics package Productivity Plus package Bending line laser Graphical workshop programming

Condition: used, Year of construction: 2008, pipe diameter (max.): 20 mm, pipe length (max.): 3,000 mm, bending radius (max.): 45 mm, overall weight: 180 kg, total length: 3,300 mm, total height: 1,150 mm, operating pressure: 125 bar, Equipment: documentation/manual, emergency stop, foot remote control, quick-change device, We are offering this used TRACTO-TECHNIK TB20D mandrel bending machine for sale. Serial number: TB20D 2110608 Year of manufacture: 2008 For sale is a mandrel bending machine, type: Tracto-Technik Tubobend TB20D, 3000 mm, from its first owner. The machine was purchased new by us in 2008 and has been in our possession ever since. It is fully operational and can be demonstrated under power upon prior arrangement. The TUBOBEND 20 mandrel bender is a pipe bending machine with a free bending head for processing pipes in all planes. It is designed for work involving adjustments according to drawings or samples, as well as for series production. With the TUBOBEND 20 mandrel bender, precision steel pipes according to DIN 2391/C, material St 35.4 NBK (hydraulic pipes), 6-16 mm diameter can be processed. The processing of other pipe qualities and dimensions is also possible. The mandrel system allows for the smallest technically feasible radii to be achieved. If required, a folding smoother can also be used. The bending unit is designed in such a way that even serpentine (meander) bends can be made. Dimensions: L x W x H in mm 920 x 720 x 1800 (without stop device) Machine lower part 630 x 550 x 700 Machine upper part 920 x 720 x 500 Weights: Total weight approx. 180 kg (without stop device) Machine lower part with hydraulic unit approx. 74 kg Safety device: - Emergency stop button: A central emergency stop button for the TUBOBEND 20 is located on the control panel. Safety cover with electrical shut-off in the hazard area of the bending arm. Description and overview: The TUBOBEND 20 mandrel bender is a small, mobile, compact pipe bending machine that can be easily disassembled into two main components for transport purposes. The bending head can be swivelled from the vertical to the horizontal position. The pipe feed length is 1500 or 3000 mm. Extensive scope of supply (a very large number of tools included!): An advantage of this offer is the extensive tool package, which is completely included in the price: see separate list. Dsdpfxo Abbmpo Ab Aekw Documentation: Original operating manual is complete. EC Declaration of Conformity available. Note: The machine will only be sold as a complete package together with the complete set of tools according to the attached list. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: Dismantling, loading and collection must be organized and carried out by the buyer himself or by a shipping company commissioned by him. Technical data according to available documents. Subject to prior sale.

Condition: new, Year of construction: 2026, control type: manual, sheet thickness steel (max.): 8 mm, sheet thickness aluminum (max.): 1 mm, overall weight: 1,000 kg, total length: 4,200 mm, total width: 900 mm, total height: 1,100 mm, warranty duration: 12 months, Equipment: CE marking, documentation/manual, Highly precise press brake for steel, copper, zinc, and aluminum sheets. These press brakes and all common spare parts are available ex stock. Maximum working length of the press brake: 4200 mm Bending capacity: up to 0.8 mm (steel sheet) Titanium-zinc sheet: 0.8 mm, aluminum sheet: 1.0 mm, copper sheet: 1.0 mm Bending angle of the bending machine: max. 160 degrees Cutting with the roller shear across the entire working width Bending ram thickness: 20 mm Cutting with the roller shear across the entire working width Raising of the upper beam in three positions Upper ram stroke: 80 mm Degree scale Weight of the press brake: approx. 810 kg Cutout 60 mm / 45° Roller shear 0.8 mm, additional cost: 350 Euro Dedjb Hxzyopfx Ab Ajkw Manual folding machine, additional cost: 75 Euro Delivery costs: 500 Euro to Germany and Austria Delivery date: every week, Monday/Tuesday Payment upon delivery or prepayment Invoice will be issued with 0% VAT. Your VAT identification number is required for this.

Condition: good (used), Year of construction: 2003, sheet width 2050 mm plate thickness 10.0 mm ST Dedez N Hxhspfx Ab Aekw pre-bending 8.0 mm ST diameter of upper rolls ~ 220 mm side roll diameter ~ 170 mm diameter of lower rolls ~ 190 mm bending speed ca. 2.0 + 5.0 m/min Control ELAP LYNX oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 5000 kg range L-W-H 3500 x 1550 x 1400 mm Current new price incl. accessories: approx. € 90.000 Special price on request Equipment: - Robust electro-hydraulic 4-roll plate bending machine - 4-roll design offers a wide range of bending and rolling capabilities - MG NC control unit "ELAP LYNX" * Operation – control of all rolls and machine axes * Digital position display * Manual operation via joysticks * Movable control panel - Two central rolls driven directly by hydraulic motors - Conical rolling possible via roll tilting - Side roll parallelism maintained via torsion shafts - Pre-bending on both ends - Diameters up to 1.1 times the top roll diameter are possible - Forged and hardened rolls (hardness: 53–55 HRC) - Low-maintenance, robust machine design - Permanent lubrication for all bearings - Sturdy welded steel construction - Selectable bending speeds (2 settings) - Electro-hydraulic drop-end bearing for easy removal of rolled parts - Pressure gauge/display for rolls - Safety system (safety trip wire with switch unit) - Operating manual (PDF)

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 25510, total width: 790 mm, total length: 850 mm, total height: 830 mm, empty load weight: 295 kg, Export is possible. Djdpfxoyw N H Ue Ab Ajkw

Condition: good (used), You are bidding here on a branded guillotine shear and a folding machine from the well-known German manufacturer Schechtl. Device features: - Guillotine Shear MSB 200: - Cuts 3 mm steel – significantly more for aluminum - Cutting length: slightly over 2 m - Front support table - 500 mm back gauge - Optional sheet metal tray - Free loading available Dedpfx Absyviwqe Aekw - Folding Machine Schechtl MAX 200: - Rail bends cleanly – test possible - Degree indicator - Bending length: slightly over 2 m - Sheet thickness: 2.5 mm (steel, sheet metal, aluminum, zinc, etc., higher for softer materials) - Standard rail – special radius rails for aluminum and zinc available upon request (add-on and special rails) - Foot pedal operation - Optional back gauge We also have available: Schechtl MSB 200, Schechtl MA 200, Schechtl HA 200 (2 mm), segmented RAS 2 m / 2 mm, and many others from 1 to 6 m. You will receive an invoice with VAT shown separately. Shipping can be arranged upon request. Free loading as shown in the pictures. Inspection and testing possible by prior phone appointment. Payment in cash upon collection – if you need anything else, please give me a call. Thank you! Collection should take place within 8 days after the end of the auction. Location: 97249 Eisingen (3 minutes from the motorway) Item numbers: 251007 and 251008

Condition: used, Year of construction: 1996, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, RILECART PB796 Calendar and Wire-bound Book Binding Machine Binding Size: 600 x 700 mm Fully automatic calendar punching and binding line. Automatic calendar hanger insertion. Max Punching Thickness per Stroke: 4,5 mm (depending on pitch, material and width), Standard Binding Dia: 1/4" & 5/16", Standard pitch 3:1", Variable speed: 500 to 2300 pieces/hour, depending on size, thickness and quality of materials. Complete with exit conveyor. Mechanical Condition: Very Good Power requirements: 400 V, 3-phase. Dkjdpfsz E S I Sox Ab Asw External air supply required. Delivery and installation service available. (POA)

Condition: good (used), functionality: fully functional, For sale is a used universal wire stapling machine, Speckbötel type FEN. This machine is particularly suitable for the production and assembly of wine crates, fruit crates, vegetable crates, and other wooden crates or wooden packaging. The staples are formed directly from the continuous wire feed from the reel within the machine. This makes the machine suitable for continuous operation in crate and packaging production. Technical data / features: Manufacturer: Speckbötel Type: FEN Manufacturing location: Hamburg Machine type: Universal wire stapling machine Design: Wire nailing machine / flat stapling machine Staple formation from continuous wire Processing of wire from a reel Large work table Height-adjustable work area Handwheel for adjustment Heavy-duty and robust industrial design Suitable for the production or assembly of: Wine crates Fruit crates Vegetable crates Packaging crates Dsdpozymynjfx Ab Aokw other wooden crates and wooden packaging The machine is in used condition. Features and condition as shown in the photos. Transportation is possible for an additional charge! The machine is currently still at the customer's location but would be available shortly! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and features may vary. Errors, prior sales, and changes are subject to change. All information without guarantee.

Condition: used, Roundo PS340 3000 mm Hydraulic Double-Pinch Plate Bending Rolls Manufacturer: Roundo AB Model: PS340 Year: 1983 Country of manufacture: Sweden Type: Hydraulic three-roll double-pinch plate bending rolls Capacity Maximum working length: 3,000 mm Pre-bending capacity: approximately 12 mm mild steel aximum rolling capacity: approximately 18–23 mm mild steel, depending upon finished diameter Standard upper-roll diameter: 340 mm Plate capacities based upon mild steel of approximately 270 N/mm² yield strength Minimum rolling diameter: approximately 1.1–1.4 times the upper-roll diameter, depending upon material thickness Remaining straight edge after pre-bending: approximately 1.5–2 times plate thickness Features Hydraulic double-pinch design Both lower rolls independently hydraulically adjustable Pre-bending of both ends without removing and reversing the plate Hydraulic rotation of all three rolls Infinitely variable rolling speed Hydraulic powered drop end Portable pendant control Front safety trip bar Heavy-duty fabricated and stress-relieved frame Forged and crowned steel rolls Rolls mounted in heavy-duty roller bearings Suitable for cylindrical and conical bending Approximate machine weight: 14,000–15,000 kg, subject to confirmation Dedpfszuzpyex Ab Aekw Approximate main motor: 22 kW, subject to data-plate confirmation

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 9-2105/331138, Equipment: cooling unit, documentation/manual, CHARMILLES ROBOFIL 290 Wire EDM Machine – 1999 Description: CHARMILLES ROBOFIL 290 CNC wire EDM machine, manufactured in 1999, designed for high-precision machining of conductive metal parts, including hardened steels, alloy steels, stainless steels, and carbides. General characteristics: - Brand: CHARMILLES - Model: ROBOFIL 290 - Year: 1999 - Type: Wire EDM machine - Control: CNC - Axes: X, Y, Z, U, and V - Wire diameter: 0.25 mm - Technology: Wire EDM cutting in a dielectric bath Characteristic | Value X-axis travel | 400 mm Y-axis travel | 250 mm Z-axis travel | 200 mm U / V-axis travel | 80 / 80 mm Maximum part dimensions | 850 × 500 × 200 mm Maximum part weight | 500 kg Taper cutting angle | ±30° over 200 mm Admissible wire diameter | 0.10 to 0.30 mm Installed power | 10.5 kVA Djds Agwbwopfx Ab Aokw Power supply | 400 V, three-phase Machine dimensions (L × W × H) | 1,800 × 1,600 × 2,180 mm Net weight | Approximately 2,200 kg Equipment and features - CHARMILLES numerical control. - 2D profile machining and taper cutting. - Water filtration and deionization system. - Adjustment of voltage and wire speed. - Anti-collision protection for the axes. - USB communication interface Machine available for viewing by appointment in our workshop in Sprimont, Belgium. For further information or to arrange a visit, please do not hesitate to contact us.

Condition: good (used), Year of construction: 1954, wire dia. . mm wire length . mm pulling capacity 7 t total power requirement . kW weight of the machine ca. . t dimensions of the machine ca. . m Dkjdpfxj Ah Id Ne Ab Aow

Condition: good (used), Year of construction: 2005, Top-of-the-line machine from the renowned manufacturer Thoman Maximum pipe diameter: 50 mm Fully automatic bending process, including 3D bending via NC control Not used extensively Includes 3 bending dies: 26.9 mm, 33.7 mm, 42.4 mm Djdpfx Abo Ahy Dne Aokw