Used Winding Groove Tubes for sale (4,306)

Condition: good (used), Year of construction: 1995, Buigmachine voor buizen van MARK / Ridgid Type: 2H B Zonder gereedschap Lodpjzulzgofx Akwoah

Condition: ready for operation (used), Year of construction: 2011, Offered is a tube laser cutting machine. Processing length X: 6500mm, workpiece diameter max.: 220mm, laser power: 3500W, beam source: CO2, power-on hours: 48817h, laser beam hours: 9403h, RF tube: renewed 01/2023. Equipped with bundle loader, unloading station, extraction system, cooling unit, annual manufacturer maintenance documented. Weight: approx. 9000kg, overall dimensions X/Y/Z: approx. 10500mm/4600mm/2200mm. Inspection possible by arrangement. Expected to be available starting October/November 2026. Ljdpoy T N Htsfx Akweah

Condition: used, Used Kleiser GmbH approximately 16sqmt horizontal shell and tube heat exchanger. Unit has (68) 316L stainless steel tubes approximately 3,000mm long x 25mm outside diameter, rated 6 bar design pressure at 100 deg.c. 316Ti stainless steel shell approximately 3,000mm long x 324mm diameter, rated 6 bar design pressure at 100 deg.c. (2) 316Ti stainless headers. Unit has 2 support mounts. Specifications: Surface Area: 16 m² Material of Shell: Stainless Steel Material of Tubes: Stainless Steel Shell Side Max. Pressure: 6 bar Lsdpfxoyh I Uno Akwjah Shell Side Max. Temp.: 100°C Tube Side Max. Pressure: 6 bar Tube Side Max. Temp.: 100°C Tube Diameter: 25 mm Number of Tubes: 68 Weight: Estimated: Kg 690.0

Condition: good (used), Year of construction: 1996, overall weight: 1,000 kg, total length: 3,500 mm, total width: 1,000 mm, total height: 1,200 mm, Pipe bending machine with electric control, 4-fold bending angle pre-selection and digital display  Hydraulicbendingdriveoperatedbyhandlevervalve Hydraulic bending drive, operated by hand lever valve Follower-type pressure die (sliding guide) Hydraulic mandrel retraction Pipe circular saw with coolant lubrication and automatic feed Pipe deburring unit for internal and external deburring Hydraulic power unit as basic seating for attaching a cutting ring assembly or flaring device  Machine mobile and flexible to use Ledpfxet Dk Uks Akwjah Max.Tube Ø: 42mm Min. Tube Ø: 6mm Max. Wall thickness:3mm Max. Bending radius:5mm Min. Bending radius:180mm Max. bending length:2000mm Deburring attachment:Yes Sawing attachment: Yes Flair attachment: Yes Length: 3500mm Width: 1000mm Height: 1200mm Weight: 1000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: fully functional, Hydraulic mandrel tube bending machine Complete bending sets with bending mandrels and bending shoes: Ø 18, 20, 22, 25, 2 x 30 + 35 mm Ljdownrt Sopfx Akwsah Additional bending mandrels, but without bending shoes: Ø 28, 2 x 38 + 42 mm Pre-assembly device with hydraulic cylinder Hydraulically driven deburring unit for tubes, inside and outside, from 6 - 48.3 mm Max. tube feed length: 3000 mm Machine weight: approx. 700 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel / Germany

Condition: good (used), Duplo Docucutter DC-645 Creaser, cutter The machine is fully operational, ready for production. Lasdez N R U Topfx Akwjh Description: The DC-645 has been designed for the growing needs of fast execution of such orders as: business cards, invitations, postcards, leaflets, covers, folders. Docucutter DC-645 cuts lengthwise and crosswise as well as creases, perforates in one pass, ensures continuity of production with minimal operator input. All machine settings can be adjusted automatically – from the settings of the cutting knives, creasing beams to the setting of the creasing depth. When cutting out the work, clippings are created, which, thanks to appropriate control, go directly to the basket located in the lower part of the device’s housing. With the DC-645 device, we will perform such works as: Postcards Cut and creased business cards Flyers Brochures Book covers CD/DVD covers Menu Mailing materials Automatic discharge of clippings into the basket Automatic adjustment of creasing depth paper size: 370×650 mm Min. paper size: 210×210 mm Minimum output format: 48×85 mm Paper weight: 110-350 g/m2 Machine weight: 360kg

Condition: good (used), Year of construction: 2001, machine/vehicle number: 071159148, Dimensions: 370 × 650 mm. Functions: creasing, cutting, and perforating in a single pass. Computer-controlled operation. Automatic sheet positioning. High cutting precision and repeatability. Lsdpjztavpjfx Akweah

Condition: like new (used), Year of construction: 2025, Tube Bender BB 76 without mandrel without tooling - model BB 76 - capacity up to 76 x 4 mm round tube mild steel - digital readout - bending angle programable - with foot pedal - bending speed 1 - 3 rpm - stepless speed - motor 4 KW 400 volt 50 hz 3 ph. - all shafts and necessary parts are heat treated and grinded - monoblock body CK 45 - weight 600 kg - dimensions 600x1100x1000 mm Lajdpjdihnusfx Akwjh

Condition: good (used), Year of construction: 2007, 1 numbering stamp Ledpfx Aoxyfr Askwoah

Condition: used, Year of construction: 1988, gebraucht 1988 090151 prompt, Zwischenverkauf v Lsdpoxx A Ekefx Akwjah Italien 12800 € 1 42 mm 4665 mm 800 mm 1160 mm 1470 kg 42 x 2,5 mm 40 x 1,2 mm 30 x 40 x 1,7 mm 40 x 30 x 1,3 mm 255 mm 22 mm 180 ° 90 °/s 5.5 kW 120 l Capacity specifications refer to 400 N/mm² Maximum bending radius with pipe guide rollers: 255 mm Maximum bending radius with pipe guide slide: 175 mm Minimum bending angle: 4° Maximum usable length without positioning device: 3900 mm Maximum usable length with positioning device: 3370 mm Adjustable mandrel extension travel from 8 mm Opening and closing travel of the counter-clamping jaws: 0-45 mm Opening and closing travel of the rollers or slides: 12-22-42 mm Operating manual in German Machine does not comply with AMVO or UVV regulations Tools not included BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: ready for operation (used), Year of construction: 2022, A complete tube filling and packaging line for ointments is available. 1) Tube feeder IWK TZK 200, year of manufacture: 1991. 2) Tube filling machine IWK TFS 30, year of manufacture: 1991. 3) Cartoner IWK CPS-R, year of manufacture: 1991. 4) Serializer Laetus MV-70-F-130-TL, year of manufacture: 2019. 5) Checkweigher Mettler & Toledo C3570, year of manufacture: 2019. 6) Bundle packer Kiener ASK 450, year of manufacture: 1993. 7) Case packer Skinetta PAL 145, year of manufacture: 1997. 8) Palletizer Skinetta PAL 1400, year of manufacture: 1997. 9) Horizontal laminar flow machine Marchhart LF-ZP-Horizontal, year of manufacture: 2020. 10) Accumulating roller conveyor RBS 140, year of manufacture: 1998. 11) Ointment pump Netzsch BEF200/NM045BH, year of manufacture: 2022. Documentation is available. On-site inspection is possible. Lodpfx Aeuf T Nlokwsah

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Manufacturer: Bacciotini Machine Type: Pit Stop AF Speed Max. Sheet Size: 50 x 85 cm Lasdpfezrtyrox Akwoh Min. Sheet Size: 10 x 15 cm Year of Manufacture: 2009 Status: available Condition: Good Available: Immediately

Condition: ready for operation (used), Year of construction: 2011, A CNC 10 axis pipe cutting system HGG including a plasma source Kjellberg HiFocus 280i is available. Pipe diameter range: 30mm-330mm, max. pipe load: 20kN, max. pipe length: 13000mm, max. workpiece weight: 2000kg, max. cutting angle: 70°, max. plasma cutting current: 280A. Documentation available. An on site inspection is possible. Ledpjytgpdsfx Akwjah

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1998, machine/vehicle number: 7395, tube wall thickness (max.): 8 mm, bending radius (max.): 600 mm, working height: 1,200 mm, overall weight: 9,000 kg, TECHNICAL DETAILS Tube outer diameter: 40–100 mm Maximum tube dimensions: 110 × 5 mm Maximum wall thickness: 8 mm Outer diameter of solid material: up to 70 mm Tube insertion length / usable length: 1,200 mm Maximum bending radius: 600 mm Bending height: 1,200 mm Lodpfxez Im Rao Akwjah MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,600 x 1,400 mm Weight: 9,000 kg

Condition: good (used), functionality: fully functional, Hydraulic tube end forming machine BLM (Italy) Laodezzwpvspfx Akwjh for tubes, up to 6 tools (5 follow-up tools) can be interchanged for forming Drive power: 7.5 kW Max. tube diameter: approx. 40 mm Max. forming length: 100 mm Weight: approx. 1.4 tons

Condition: ready for operation (used), Year of construction: 2016, A complete SML winder including core magazine is available. Infeed part roll width: 2600mm, max. film end width: 2350mm, winding shafts: 6/3 inch, max. mechanical speed: 250m/min, max. roll diameter: 980mm, film thickness range: 15µm-2500µm, core diameter: 3 inch, core type: cardboard/plastic, roll change time: 4min, deposit capacity 2nd table: 15 rolls, power requirement: 52kW, edge trimming: In-Line, Knife type: free cut with razor blade, Winder mode: gap/contact, Roll delivery: 3-axis robot. Including non-stick rollers, linear guide, scale, robot and core magazine. Documentation available. On-site inspection is possible. Laodovripyopfx Akwjh

Condition: used, Tube end forming machine,Spiro Pneumatic Tube Notching Machine / Assembly Stand, Spiro Manual Tube Notching Machine, Used Machine Technical Specifications Manufacturer: Spiro Development AB (Made in Sweden) Year of Manufacture: 2008 Type: Manual Tube Notching Machine (with pneumatic assistance) Frame Construction: Heavy-duty aluminium machine-building profile frame Operation: Foot-switch-controlled pneumatic operation Design: Adjustable-height and adjustable-distance tube support stand for convenient positioning and machining of long tubes Overall Dimensions Width: 2350 mm Depth: 930 mm Height: 1450 mm Ledpozwxwgsfx Akweah

Year of construction: 1991, condition: used, Drive: servo motors, individually for each axis, max. number of bending slides: 8, spring steel wire diameter: 0.2-1mm, copper wire diameter: 0.3-2mm, max. winding mandrel diameter: 10mm, max. winding spindle travel: 45mm, max. length of rotating initial leg: 50mm, end leg length: theoretically unlimited, winding spindle revolutions: limited by the winding spindle travel of 45mm, control system: 4-axis CNC positioning control Pronumerik Schleicher, the machine operates using DOS-based programming, including pay-off reel, accessories, operating manuals and documentation, well-maintained and in good condition. On-site inspection is possible. Laodpfx Akjz R A Izjweh

Condition: used, Year of construction: 2016, machine/vehicle number: PST34, Used BUCHER tube-in-tube flash pasteurizer 12000 L/hTechnical Specifications & Performance DataThis tube-in-tube flash pasteurizer delivers reliable thermal treatment for high-quality beverage production. Manufactured by Bucher Unipektin, model PWAP 12000-S, the unit is designed for continuous, hygienic operation with minimal product degradation. Its robust stainless steel construction and compact skid-mounted layout simplify installation and integration into existing processing or used bottling line environments.Manufacturer: Bucher UnipektinModel: PWAP 12000-SMachine type: Tube-in-tube flash pasteurizerYear: 2016Capacity: 10,000–12,000 l/hHeat exchanger: Tube-in-tube designConstruction: Stainless steel, skid-mounted frameControl: Touchscreen HMI control panelIncluded components: Product feed pump, holding tubeSanitation: CIP-ready configurationPrevious product history: Apple juice / concentrate (non-dairy)Documentation: Full documentation and user manual includedAdvanced Automation & Control SystemsThe integrated touchscreen HMI provides intuitive operation, real-time process visualization, and streamlined recipe management for consistent pasteurization results. Automated control of temperature, product flow, and holding time supports stable performance and product safety. Alarm handling, trend logging, and guided operator prompts help ensure repeatable processes with minimal downtime. The system’s CIP-ready design allows automated cleaning sequences to be managed from the control interface for efficient changeovers and hygiene assurance.Production Line Integration CapabilitiesEngineered for seamless integration in beverage production environments, this flash pasteurizer connects upstream to blending, filtration, and storage tanks, and downstream to fillers and industrial packaging systems. The skid-mounted footprint simplifies placement and utilities hook-up, enabling fast commissioning within second hand or upgraded processing setups. Its continuous operation supports steady flows into downstream filling and labeling equipment, helping maintain overall line efficiency.Machine Condition & Maintenance HistoryThe unit has a documented non-dairy product history processing apple juice and concentrate, contributing to a clean internal condition profile. Supplied with full documentation and user manual to facilitate installation, operation, and maintenance. Presented as a second hand pasteurization system suitable for beverage production environments seeking dependable thermal treatment with compact installation.Operational Performance & VersatilityThe tube-in-tube configuration is well-suited for juices, concentrates, and similar non-dairy beverages where gentle handling and stable heat transfer are critical. The design supports rapid heat-up and controlled holding for effective microbial inactivation while preserving product quality attributes. The CIP-ready construction, sanitary connections, and stainless steel surfaces... Lsdpsz E Dhqofx Akwoah

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Equipment and technical data: Edge banding thickness: max. 8-55 mm Edge banding with rounding unit: max. 45 mm Strip edge banding thickness: 0.4 - 8 mm Roller edge thickness: 0.4 - 3 mm Feed rate: 12 m/min Incl. rotatable control panel HF joining unit, 2-motor Incl. quick-heating tank, interchangeable, Teflon-coated Incl. electronic positioning of the pressure rollers Incl. swiveling double miter saw unit Lasdew Nadgjpfx Akweh Incl. flush trimming unit Incl. CNC-controlled chamfering, radius, and corner copying unit with nesting package Incl. radius pull blade with nesting package Incl. flat pull blade Incl. groove unit Incl. scraping unit Incl. spray unit Availability: short notice Location: Flörsheim

Condition: good (used), Year of construction: 1996, machine/vehicle number: 5090, Offer 22186 Technical data: Laedpfxjztvgwo Akwjh - Bending capacity - Pipe at 45 kg/mm²: Ø 6 - 48 mm - Solid material up to approximately: 30 mm - Max. bending angle: 180° - Bending radius: 2 x D - Drive: 400 V / 1.5 kW - Space requirement: approx. W 4500 x H 1400 x D 1000 mm - Weight: approx. 600 kg - with: - Digital bending angle display + fine adjustment of the bending angle - Mandrel bending device, 3.0 m, with hydraulic retraction - Bending tools: 20 R 60; 22 R 66; 25 R 75 mm - 25 R 50; 38 R 114 mm - Various bending mandrels, length: 3000 mm

Condition: refurbished (used), functionality: fully functional, Offering MORGANA AUTOCREASER PRO 33 folding machines fully refurbished by our team photos and videos available equipment in excellent condition 2 machines currently available Laedjzw Dg Hopfx Akwoh Price: €4,500.00 / €5,500.00 Delivery possible or preparation on a pallet, ready for shipment.

Condition: new, functionality: fully functional, Year of construction: 2021, For sale: Brand new, never-used DAVI bending machine. Lajdpfx Akoy N Rbwowsh *MAIN FEATURES MCP 18* *1. Type and Capacity* - *3 hydraulically driven rollers*, pyramid configuration - *Shafts Ø 180 mm* → this is the "18" in MCP 18 - *Bending*: round, square, rectangular tubes, angles, flat bars, UPN, IPE, HEA... all b235 profiles *2. Indicative capacities on MCP series* DAVI does not provide the exact MCP 18 datasheet online, but for the equivalent MCP range: Profile Approx capacity MCP 18 Round tube Ø 6" to 8" depending on wall thickness Solid square 80x80 mm to 100x100 mm Angle 120x120x12 mm UPN UPN 200 - 240 IPE flat flange IPE 200 - 240 Actual figures depend on wall thickness and steel grade. The 18 cm Ø shafts make this a mid/high-category machine. For all available options, please refer to the photo in the listing.

Condition: used, Year of construction: 1990, Technical details: tube diameter: 42 mm wall strength: 25 mm round bar steel: max. Ø 20 mm square material: Rohr 25 x 25 mm bending radius max.: innen max: Ø 20 und außen max: Ø 170 mm bending speed: keine Angaben °/s tube pipe draw up length: 3000 mm control: Software RC 7000 weight of the machine ca.: 2,8 t dimensions electric cabinet: 800 x 700 x 2000 mm Ljdpju Ibvuefx Akwoah dimension machine xH: 5,1 x 0,7 x 2,0 m Application: Machining of deformable tubes, rectangular tubes and round bars and square tubes. Description of the software RC7000, programming manual rectangular tube 42 x 20 x 2,5mm bending direction to the left Operation via control panel with monitor Accessories: -div. bending tools for tube Ø 25mm -12 div. collets -div. auxiliary and clamping devices *

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 2,000 h, control type: CNC control, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser hours: 2,000 h, laser power: 2,000 W, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, pipe diameter (max.): 230 mm, pipe length (max.): 6,050 mm, working length: 6,500 mm, input voltage: 380 V, input current: 63 A, type of cooling: water, total length: 11,600 mm, total width: 3,000 mm, total height: 2,600 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, safety light barrier, For sale is a used Bodor T230 tube laser. Tube length 6000mm, diameter 230mm, unloading length 2000mm. The machine is in good condition and can be inspected. The system has been reliably serviced and maintained by our trained personnel. Operating manual, CE certificate, extraction system, etc. are included. Inspection in Mönchengladbach. Ljdpfx Ajypawyokwoah