Used Welding Smoke Extraction Systems for sale (38,640)

Year of construction: 2013, condition: used, Make: PAUL VON DER BANK GMBH, Type: Robotic Welding System, Year of manufacture: 2013, Serial No.: 13.536, Welding source, make Fronius, type CM TransPuls Synergic 4000, Cooling unit, Welding unit VR7000CMT, Programming terminal RCU5000I, Positioner table, Welding robot, make KUKA, type KR5-2ARC, Robot controller KRC4, Extraction system, make Plymovent – System not connected. Dsdpjyx Exvjfx Am Rech

Condition: like new (used), Year of construction: 2018, operating hours: 41 h, As new mobile extraction unit from TEKA Model: Filtoo Dcedpfxey Ey Rgs Am Rjh

Year of construction: 2007, condition: ready for operation (used), Features: 1) KUKA KR 30 HA industrial robot, max. reach: 2033mm, rated payload: 30kg, max. additional load arm + wrist: 35kg, max. total load: 65kg, number of axes: 6, position repeatability: +/-0.05mm, path repeatability: +/-0.16mm, operating temperature: 10-55°C, protection class: IP64, IP65 (central hand), connected load: 7.3kVA, robot installation area: 850x950mm, weight: 665kg, 2) Trumpf TruDisk 8002 (6000) laser source, connected load: 39/40kVA, laser type: ND:YAG laser, weight: 2t, 3) KLH L 22 cooling unit, rated voltage: 3x 400V, refrigerant: R407c, refrigerant charge: 18kg, permissible operating pressure: 25bar, max. operating current: 31A, 4) filter unit. An on-site inspection is possible. Dodpfoy U Nrfex Am Rjch

Condition: good (used), For sale is a BT-400 dust extraction unit with a chip volume of 270 liters. The machine has been inspected and refurbished by our service team and is in good condition. Dodpfsy U Irkjx Am Rech Technical data: - Suction capacity 2530 m³/h - Suction connection 125/2x100 mm - Chip volume 270 liters - Motor power 1.5 kW / 2 HP - Year of manufacture 2025 The dust extraction unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Info: Tel.: 06244-20299 Related terms: Dust extraction unit, dust extraction Reference: R-A0117

Condition: used, Year of construction: 2003, machine/vehicle number: 519553, Central extraction system Adlolph & Co. (JKF) with screw conveyor and rotary valve. Manufacturer: Adolph & Co. (JKF) Type: AC 2 LK Year of manufacture: 2003 Suitable for dust and chips Volume flow: approx. 16,000 m³/h With air recirculation 1 piece Sluice filter, galvanized - Year of manufacture 2003 - AC 2 LK - Filter area: approx. 150m² - Cleaning of the filters via a vibration motor - Filter housing made of galvanized sheet steel - 3 inspection doors - Pressure relief surfaces - Exhaust air connection according to local requirements - Filter base frame in welded steel construction, galvanized. - Including dry extinguishing line, C connection 3 pieces Extraction fans: 1 piece Manufacturer: JKF Type: JK - 40K L Motor power: 11.0 kW Speed: 2,400 rpm Air flow: ~ 10,800 m³/h 1 piece Manufacturer: JKF Type: JK - 30K L Motor power: 7.5 kW Speed: 2,900 rpm Air flow: ~ 7,500 m³/h 1 piece Manufacturer: JKF Type: JK - 30K L Motor power: 7.5 kW Speed: 2,900 rpm Air flow: ~ 7,500 m³/h1 piece Pipe components Air return - incl. galvanized ducts Dodpjywd I Tjfx Am Rjch - Must be supplemented for a new location 1 piece Control cabinet With PLC Siemens control, in dustproof sheet steel standard housing, designed as a wall igned for: Installation dimensions: - Length: 5,250 mm - Width: 1,300 mm - Height: 4,650 mm (may vary depending on equipment) Electrical connection value: - Approx. varies depending on number of fans - 400 V/50 Hz - Control voltage 230 V AC/24 V DC - Location, not in stock

Condition: good (used), Year of construction: 1999, machine/vehicle number: 0118703/99-1, functionality: fully functional, power: 55 kW (74.78 HP), input voltage: 400 V, type of input current: DC, volume flow: 1,200 m³/h, intake manifold diameter: 150 mm, filter area: 8 m², For sale is a Bristol 'TF' B 250 extraction unit. The item is in good condition and is ready for immediate use. Device type: Extraction unit Model: BRISTOL 'TF' B 250 Dodsy R Ax Ropfx Am Rjch Motor power: 0.55 kW Airflow: 1,200 - 1,500 m³/h Connection voltage: 400V / 50Hz Extraction spigot diameter: 150 - 200 mm Application areas: Oil mist, emulsion mist, dust Year of manufacture / Serial number: 1999 / 0118703/99-1 Transport and loading can be organized throughout Europe at an additional cost, upon request. All prices are subject to VAT. Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or ways to contact us, please visit our website.

Condition: excellent (used), Year of construction: 2021, volume capacity 3000 m3/h feed volume 99.9 % length 3.000 Absaugschlauch mm compressed air 5.0 - 6.0 bar motor 230 Volt motor 1.5 KW weight 135 kg range L-W-H 655 x 655 x 1460 mm very rarely used according to the previous owner Dcjdpfx Amey Erxcj Roh current new price approx. 4.500 euros special price on request Description : - KEMPER Filter-Master XL with 1x suction arm - IFA-tested - W3 approval = suitable for use with . welding of high-alloy metals - Cleaning takes place via compressed air - easy to move Technical data - Fan capacity: 3,000 m³/h - Extraction capacity (max.): 1,000 m³/h - Motor power: 1.5 kW - Supply voltage: 3 x 400 V / 50 Hz - Separation efficiency: > 99.9 % - Number of filter cartridges: 1 - Compressed air supply: 5 - 6 bar - Noise level: 69 dB (A) - Weight (without extraction arm): 135 kg - Dimensions (W x D x H): 655 x 655 x 1,460 mm Note : - Device is only used for extracting dry dust / smoke - Read the operating instructions before using the appliance for the first time. Read instructions

Condition: used, Year of construction: 2017, functionality: fully functional, filter area: 69.2 m², overall weight: 1,336 kg, year of last overhaul: 2025, Equipment: CE marking, We are offering this used AL-KO EJ DUO 6 ZRS OV stationary dust extraction system, manufactured in 2017. Type: EJ DUO 6 ZRS OV Type number: P170701 Manufacturer's number: 2433376133 Year of manufacture: 2017 Filter area: 69.2 m² Weight: 1336 kg Dcodpfx Aszbp Rmsm Reh Air filter design: Category M, elect., 1.44 m Item number: 85100401 Filter hoses were replaced in November 2024. Compressed air cleaning with integrated compressed air tank – time-controlled. Includes all pipelines and valves (including 1 pneumatically controlled valve). The filter station has 6 connections for exhaust air intake. Includes 6 fans. Chip removal: after the filter station, there is a Vexat-compliant rotary valve airlock, a ring line with a fan, and a separation box, below which there is another Vexat-compliant rotary valve airlock. Currently, in winter, the chips are conveyed via a screw conveyor into the silo; in summer, they are filled into big bags. The system can currently be inspected while in active operation until the end of July. Collection by self-dismantling is possible from August 1st to no later than the week of August 3rd. Only B2B sales, excluding any warranty. If you have any questions or require further information, please send us a message or call us.

Condition: defective spare-parts repository (used), Year of construction: 2011, functionality: not functional, laser power: 6,000 W, laser source model: TruFlow 6000, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser power: 6,000 W Laser source: TruFlow 6000 MACHINE DETAILS Connected load: 114 kVA Mains connection: 400 V Control voltage: 24 V Fuse protection: 200 A Compressed air connection: 6 – 14 bar Package dimensions Cabinet: 2600 x 800 x 1200 mm Laser head: 1200 x 1200 x 1200 mm Dsdpfx Amoy Hqahj Rjch Laser: 3000 x 1600 x 2800 mm 800 x 800 x 2000 mm 1400 x 1000 x 2000 mm 2 x 1200 x 800 x 2200 mm

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 8011510B, functionality: fully functional, filter area: 72 m², production capacity: 80,000 unit/h, Equipment: CE marking, TECHNICAL DETAILS Capacity: 80,000 m³/h Number of filter bags: 384 pcs Filter length: 2,500 mm Filter diameter: 230 mm Filter area: 72 m² MACHINE DETAILS Connected load: 15 kW Weight of upper section with motors: 4,000 kg Weight of intermediate section with filter sleeves: 4,000 kg Weight of lower section with legs: 2,000 kg Main fan: 12 pcs Power of main fan: 15 kW Nominal air flow: 22 m/s Djdpfey Ai Tfjx Am Roch EQUIPMENT Return lines Control cabinet CE marking Extinguishing system Control cabinet Shaking system Vacuum installation Note: The machine has already been dismantled.

Year of construction: 2003, condition: good (used), machine/vehicle number: FA/07/RE/1612/3, For sale: Complete industrial extraction system consisting of 6 Colt Coltair roof fans, including the corresponding control cabinet/central control unit. This system was used for ventilation and extraction in a warehouse measuring approximately 90 x 25 x 12 meters and has been decommissioned in working condition. The entire set has been professionally dismantled and is preferably sold as a whole. The fans are suitable for, among other things: - Welding fume extraction - Fume extraction - Ventilation of workshops and warehouses - General industrial air exchange Technical data per fan Brand: Colt International Ltd Product: Coltair Fan Unit Type: FA/07/RE/1612/3 Power supply: 400V Motor: 3-phase Output: 0.60 / 0.40 kW Speed: 900 / 650 rpm Capacity: 3.62 / 2.85 m³/s Converted per fan: approx. 13,032 / 10,260 m³/h Total capacity for the complete set Approx. 78,192 m³/h on high setting Approx. 61,560 m³/h on low setting What is included: - 6 roof fans - Complete control cabinet / control unit - Used, well-maintained industrial set - Professionally dismantled in working order Dcjdpfx Ajy Hw Avsm Rjh Inspection possible by appointment. Loading on site by arrangement. Relevant keywords roof fan, extraction fan, industrial ventilation, welding fume extraction, warehouse ventilation, extraction system, 400V fan, Colt Coltair, roof extraction, industrial extraction set

Condition: used, Year of construction: 2017, functionality: fully functional, operating hours: 21,809 h, type of input current: three-phase, suction capacity: 20,000 m³/h, filter area: 222 m², total height: 3,700 mm, total length: 1,800 mm, total width: 2,100 mm, overall weight: 1,600 kg, Novus AirTower FT0120018 EC filter ventilation tower – 20,000 m3/h Industrial filter ventilation for welding halls – numerous technological processes in production facilities, mainly involving metalworking. Very low energy consumption due to the use of innovative fans. Instead of a standard fan, an EC fan is used, providing SIGNIFICANT savings by minimizing electricity consumption. The EC fan with a built-in frequency converter also allows for control of the fan speed / energy consumption / device performance within a working range of 60%, 80%, and 100%. Air is drawn in from the top and discharged downwards without creating drafts – directly to the work areas. Layered filter ventilation principle; the device does not require the installation of pipelines. Patron-type filter cartridges – self-cleaning using compressed air pulses during operation. Filter cleaning using pressure difference – no loss of compressed air. Djdexxalnjpfx Am Rech Layered ventilation principle: contaminated air is drawn in from the top, filtered, and then released at floor level as clean, breathable air without generating drafts, at a speed below 1.2 m/s. Precisely where employees breathe it in. And this is within a wide range of 270 degrees. At the same time, the Airtower operates according to the layered ventilation principle, recommended by trade unions and considered the best type of air circulation. Year of manufacture: 2017 Total operating hours: 21,809 Parameters: - 4 EC fans with a power of 3.9 kW each - Airflow 20,000 m3/h - Filtration area 222 m2 - 6 patron-type filter cartridges - Fine final filter - Fireproof package - EC Blue ENERGY PACKAGE - Hall dust sensor – dust sensor with signaling (LEDs) that transmits dust level information to the Airtower for device power regulation. Energy savings depending on the amount of dust present in the hall at any given time. Very quiet operation Stock number: 1066

Condition: used, Year of construction: 2010, controller model: , _____ Description: Year of manuf. : 2010 TruDisk 3302 laser system :- TRUMPF TruDisk 3302 with a beam quality of 8 mm mrad :- Output power of 3.3 kW at the workpiece :- Laser system with 1 cavity :- Beam delivery system comprising an optical assembly for a single optical path, a fast switch (50 ms switching time) and a pilot laser including electrical control :- Integrated power supply and real-time capable control system for the evaluation and visualisation of operational data Dcsdpfx Aoy R Sc Eem Rsh :- Fast laser power control :- TruControl 1000 control system :- Storage capacity for 199 laser programmes :- Safety monitoring in accordance with laser safety class 1, including a central safety lock :- Protection class IP54 :- 10.4" panel computer with TFT touchscreen Extension of the beam path :Plus 1 additional laser light cable output, including interface card :consisting of: :# Optical assembly on base plate with fast switch :# Beam safety switch after coupling, if the output is not connected to an LLK KUKA Roboter KR 30 HA (High Accuracy) inkl. KRC2 :- Six-axis industrial robot mechanics with articulated kinematics :- Three-phase servo drives for 6 degrees of freedom – maintenance-free and protected against overload :- Absolute position measurement :- The K-IRL programming language enables, amongst other things, a flexible programme structure, freely selectable programme/variable names, etc. :- Telediagnostics module DKP 400.1 Rotate-Tilt Positioner :- Rotation and tilting of workpiece clamping devices in relation :to the robot’s position :- Fully interpolated integration of the rotation and tilt axes :as the 7th and 8th NC axes 3D clamping plate 800 x 100 :- Demmeler System :Clamping of fixtures via 3D worktable, hole pitch 16 :mm / grid 50x50 mm 2, SW 800x100 Two-station rotary table :- Manual two-station rotary table, each side of which can accommodate one component clamping fixture :- Light-tight integration into the safety enclosure :- The fixtures are connected via two support rails each Laser Welding Technology Package :- Manual two-station rotary table designed to accommodate one component clamping fixture on each machining side :- The fixtures are connected via two support rails each :with a 16 mm diameter and 100 mm hole pattern : : Standard cabin :- Dimensions (L/W/H) 4800 mm x 7000 mm x 3200 mm :- Automatic sliding door at the front 2000 mm x 2300 mm :- 1 laser safety screen :- Cab lighting

Condition: new, Year of construction: 2026, functionality: fully functional, Complete module for supplying two two welding workstations with integrated integrated welding fume extraction system from Teka (welding fume extraction class W3, with automatic automatic filter cleaning) for steel. Mobile product. Small devices (Bosch, Makita or Milwaukee) can be attached to the holder (Fig. 4). Alternatively (for an extra charge), extraction systems from Nedermann, Kemper, Denios, Valco, Vaupel, Plymovent and other brands. Fully assembled including 1 frame 2 AGA 2020 extension arms 1 tool cabinet 1 gas cylinder holder 2 power dispensers 2 compressed air dispensers The welding workstation is suitable for TIG, MIG and MAG welding equipment from the companies: Fronius, Clos, Rehm, Migomat, Esab, Lorsch, Ideal, Kemppi and many more! Dcjdpfjuud Irjx Am Roh The welding table shown in picture 5&6 can be purchased separately! At the moment we have one returned knife and one used welding workstation (SAP) available. - We look forward to your inquiry!

Year of construction: 2011, condition: excellent (used), Cloos welding robot Qirox QRC 320 incl. control V 6, Dcodpfjizwv Nex Am Roh pedestal for standing arrangement, Cloos welding machine Quinto II 603 ( 600 A), wire feed, welding torch, torch hose package, mech. cleaning, pressure booster 1 rotary tilt table WPK 5000, pick-up weight 500 kg, 1 start preselection, 1 control for customer-provided sliding door gas nozzle sensor, arc seam search, point editor Unit will be completely overhauled and serviced before delivery. Second station with another, same rotary tilt table possible.

Condition: used, functionality: limited functionality, input voltage: 400 V, input frequency: 50 Hz, intake manifold diameter: 300 mm, actuation type: electric, Used stationary extraction system installed in a good, tightly sealed cabinet with external electrical control box. Automatic electric filter shaking. Dismantled, immediately available from Barneveld. 300mm connection. Djdpoy Ihwtjfx Am Rjch

Condition: good (used), Storage location: 3108 Manufacturer: TEKA Year of manufacture: 2012 Dsdpoy T Uxnjfx Am Rjch Operating hours: 5,618 h Type: Strongmaster IFA Serial number: 6907210061062 Airflow rate: 3,000 m³/h Outrigger length (approx.): 3,000 mm Features: mobile Accessories: new filter insert Connection: 1.1 kW, 400 V Weight: 160 kg Dimensions: 800 x 800 x 1,500 mm (without hose) Hose length: approx. 4,000 mm

Condition: excellent (used), Year of construction: 2000, For sale is a Höcker Polytechnik Vacumobil system. Dcsdpfeylciwjx Am Rjh The unit is fully functional and can be inspected and tested on site. The sale is carried out on behalf of a customer. Machine location: Friedeburg region. Machine details: - Year of manufacture: 2000 - Extraction diameter: 300 mm - Motor power: 7.5 kW - Nominal air flow rate: 5320 m3/h - Mobile on castors Price is net, plus VAT. An invoice for the machine will be issued. Shipping of the machine can be arranged at additional cost. Feel free to contact us with any questions or if you are interested! Your JG Holztechnik Team from 26188 Edewecht.

Year of construction: 2015, condition: excellent (used), Mecasonic MCS2 CAB ultrasonic welding system - Very good condition - Year of manufacture: 2015 - 3 units available - CE declaration of conformity given - Condition: Incoterms EXW CH-4528 Zuchwil Dcjdpfx Ajvvw Ekem Roh - Loading options available

Condition: excellent (used), Professional 3M Speedglas welding set with Adflo powered air-purifying respirator (PAPR) system. Used equipment, fully functional, in good technical condition. Ideal for professional MIG/MAG, TIG, and shielded metal arc welding (SMAW) applications. ⚠️ Price is for 1 set (1 SET). The set includes: 3M Speedglas auto-darkening welding helmet, 3M Adflo PAPR system, waist belt, air hose, charger, Speedglas carrying bag, battery. Condition: used equipment, Dodpfxjy Ucnae Am Rsch normal signs of use, visible in the photos, visor darkens properly, PAPR system starts and operates, complete set as shown in the photos. Applications: MIG/MAG welding, TIG welding, SMAW welding, industry, workshop, manufacturing, metalworking. Why it’s a good choice: reputable 3M Speedglas brand, very high level of comfort, respiratory protection thanks to the Adflo system, convenient carrying bag, professional, premium-class equipment. Shipping by courier or personal pickup is possible.

Condition: good (used), Year of construction: 2003, IPE Compact Filter BG Jet 300 Year of manufacture: 2003 Filter area: 24.7 m3 Category: BIA-KAT Airflow rate: 4000 m3/h Negative pressure: 2110 Pa Extraction diameter: 250 mm Compressed air connection: min. 6 bar - max. 8 bar Connected load: 5 kW Nominal speed: 4 kW Length: 2000 mm Width: 1000 mm Height: 3420 mm Weight: 725 kg (extraction) Dodsy Dc R Tepfx Am Roch New filters Press: Genius 1 Hydraulic operating pressure: 190 bar Year of manufacture: 04/2003 Power: 7 kW Location: available from stock 54634 Bitburg - immediately available - Subject to prior sale Sold as seen, without warranty without guarantee

Condition: used, Year of construction: 2013, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 13 A, input frequency: 50 Hz, type of input current: three-phase, volume flow: 5,089 m³/h, suction capacity: 5,089 m³/h, intake manifold diameter: 300 mm, actuation type: electric, overall weight: 972 kg, We are offering this used AL-KO POWER UNIT 300 P mobile extraction system, year of manufacture 2013. The extraction unit is in good condition and was kept in a heated room. The filters are clean and can be easily shaken off. Type: POWER UNIT 300 P Serial number: 2433358790 Year of manufacture: 2013 Suction nozzle: 300 mm Rated speed: 2,895 rpm Rated air flow: 5,089 m³/h Rated current: 13.8 A Negative pressure at rated air flow: 2,050 Pa Protection class: IP 54 Motor power: 7.5 kW Weight: 972 kg Dsdpfx Asy Akfpom Roch Voltage/phase/frequency: 400/3~/50 Hz Max. compressed air connection: 8.5 bar Fuse: 25 A Filter number: 85101201 Filter category: Cat. M automatic gate/slide valve control If you have any questions or need further information, feel free to send us a message or call us.

Condition: used, used mobile extraction unit Extraction nozzle diameter: 140 mm Motor: 1.5 kW - 400 V with steel impeller Availability: short-term Storage location: Röllbach Dcsdey Nug Rjpfx Am Rsh

Condition: excellent (used), Year of construction: 2008, Air Plants 'CEF 3 - 7.5Kw' Single bin dust extraction / Filter unit. UK £1950 + VAT. This unit has been used for fine dust only and has had little use over the years. In excellent condition and immediately available. Dcodpfx Amsyvvdqe Reh

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, working range: X-axis: 2.000 mm Y-axis: 1.200 mm Dcsdpfx Amsy Er Uqs Roh Z-axis: 190 mm welding power: 20 kA welding force: 2 x 5 kN