Used Welding Head for sale (14,653)

Condition: new, table diameter 500 mm table load 300 horizontal kg. table load 150 vertikal kg. swivelling range 0 - 90 Grad turning speeds 0,2 - 2,5 U/min bore 90,0 mm table height ~ 650 mm mm motor 230 Volt weight of the machine ca. 90,0 kg. range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be tilted and clamped at an angle of 0 ° to 90 ° - manual tilting - Start / stop via location-independent foot switch - Direction of rotation can be selected right / left - Adjustable rotation time - The control of the welding machine via control - 350 amp ground connection Kdjdpfxoxabl Se Ag Usg Scope of delivery: - control (integrated) - foot switch

Condition: new, volume capacity 1600 m3/h feed volume 99,9 % length 3.000 Absaugschlauch mm motor 230 Volt motor 1,1 KW weight 80,0 kg range L-W-H 580 x 580 x 900 mm Description: The filtoo filter device newly developed by TEKA is a mobile filter system that many Tasks in the field of filtration of Smoking, dusts and gases can be used. Also suitable for high-alloy steels (stainless steel). (the device was based on DIN EN ISO 15012-1 (2005) tested and is IFA (formerly BGIA) certified (IFA No. 201020469/1140) for welding smoke class "W3" (degree of separation:> 99.9%)) Where can the SIG 230 filtoo be used? - at welding workplaces - in the workshop area - for soldering applications - with restorers - in locksmiths Furnishing: - BGIA - certified suction and filter system IFA 1005030 for suction to hochleg. Steels & non-ferrous metals - Operating instructions in German optional equipment for a surcharge (recommended) - Retrofit kit STAVO (dust pre-separation) - for FILTOO with spark protection and collecting tray Note : - The device is only used to extract dry dust / smoke Kdjdpoxaal Rofx Ag Uog - Read the operating instructions before using for the first time

Condition: new, table load 1000 kg table diameter 900 mm turning speeds 0,12 - 1,2 U/min swivelling range 0 - 135 Grad speed Kipp 0,35 U/min welding current 500 A dimensions of the machine ca. 1475 x 1050 x 900 mm For heavy industry When choosing a turntable, it is essential Turning and tilting torque must be taken into account. To note Kodpfx Aoxaac Ajg Usdg applies to how far the center of gravity of the workpiece is from the The faceplate is away or how far the center of gravity is is eccentric from the center. By means of a Rotary and tilting tables can be used to optimize workpieces position for welding. - Robust construction. - Infinitely variable. - Hand remote control. - HF protected. Furnishing : - 1 control (integrated) - 1 wired remote control

Condition: new, table diameter 340 mm table load 290 horizontal kg table load capacity 190 vertikal kg turning speeds 0,6 - 6,0 U/min spindle bore 60,0 mm swivelling range 0 - 90 Grad weight of the machine ca. 62 kg dimensions of the machine ca. 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Kdjdpfx Aoxaafqjg Usg Functions of the COM 1000 control: - Right / left rotation - stepless speed control - welding torch on / off - Control for turning time

Condition: new, total power requirement 230 Volt table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90 Grad turning speeds 0,2 - 2,0 U/min turning speeds 1,2 - 12,0 U/min bore 20,0 mm weight of the machine ca. 50 kg dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch Kdedoxaatnopfx Ag Ueg

Condition: new, table diameter 340 mm Ksdpjxabm Nofx Ag Ujdg table load 160 horizontal kg. table load 100 vertikal kg. turning speeds 0,6 - 6,0 U/min swivelling range 0 - 90 Grad bore 60,0 mm motor 230 Volt weight of the machine ca. 56 kg. range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) - Speed display

Condition: as good as new (ex-display), Year of construction: 2024, weight max. in kg max. 1000 kg turning speeds 0,18 - 0,58 U/min height 976 - 1436 mm inclination 0 - 115 ° table diameter 895 mm voltage 380 V total power requirement 2,0 kW weight 685 kg range L-W-H 2414 x 920 x 1436 mm Exhibition machine from 2024 with only approx. 2x operating hours Condition NEW!! Special price on request Kjdpfx Ajw U U R Eog Uodg The AK BEND SRH hydraulic welding positioner is ideal for welding, assembly and maintenance work. Positioning is done via a hydraulic rotation and tilting function. Description: - electro-hydraulic turning and tilting function - Fast handling of workpieces - Maximum productivity thanks to optimal working position - Lifting, tilting and turning workpieces in one clamping - Low idle times thanks to turning components - Maximum work performance thanks to comfortable working - Back-friendly working for the user Equipment: - Continuously variable speed adjustment - Freely movable foot switch - Hand-held remote control with 5 meter cable - Freely movable control panel with digital speed display - Analogue angle display * Manufacturer video (identical rotary table): ?v=Vayw8Ny64nc

Condition: used, Stud welding machine with shielding gas and lift ignition HBS Type ARC 804 Serial No. 610652 Welding current up to 800 A at 5% duty cycle Welding voltage 30 V Open circuit voltage U0: 95 V Maximum stud diameter 10 mm Rated power 15 kVA Power supply 400 Volt, 50 Hz, 32 A plug Rated current 27 A - Welding current adjustable in 4 steps - Continuously variable welding time setting - Shielding gas connection with continuously adjustable time - Welding gun with lift ignition PMH70 - Hose package length 4.5 m - Ground cable with two leads and two ground clamps - Digital display for current welding time in ms - Indicator lights for external conductor failure (phase failure) - At maximum stud diameter, approx. 3 studs per minute - 1 piece stud holder Ø 8 mm (fitted), 1 piece stud holder Ø 10 mm, 1 support tube Kdsdpfxsx Urcaj Ag Ueg - Mobile on transport trolley - Approx. 20 kg welding studs M8 and M10 in steel and stainless steel, including 12 kg M8 x 25 in stainless steel Required space (L x W x H) 500 x 325 x 305 mm Weight of welding machine 60 kg Total weight with transport trolley 145 kg Good condition

Condition: good (used), dividing head, dividing head, gear, gears lathe, spur gears, spur gear Kdjdpfxox R S Axo Ag Ueg -Gears: 12 pieces -Teeth: 27 to 120 Z see photo parts list -Tooth width: 15 mm -Shaft mount: Ø 18 mm -Dimensions: see photo parts list -Shipping/Price: complete -Transport dimensions: Ø 153 x 180 mm -Weight: 5.2 kg/total

Condition: excellent (used), dividing head, dividing head, gear, gears, lathe -Gears: 18 pieces module 1.5 Kodpfxex R Sxmj Ag Usdg -Teeth: 127/120/89/78/60/58/56/48/45/44/39/38/33 -Tooth width: mm -Shaft mount: Ø 28/23 mm -Dimensions: see photo parts list -Shipping/Price: complete -Dimensions: Ø 193 to Ø 53 mm -Weight: 14.7 kg/total

Condition: good (used), dividing head, dividing head, gear, gears lathe, spur gears, spur gear Kedpfx Ajx R Swieg Uodg -Gears: 71 pieces module 1.5 -Teeth: 33 to 127 Z see photo parts list -Tooth width: mm -Shaft mount: Ø 28/23 mm -Dimensions: see photo parts list -Shipping/Price: complete -Transport dimensions: 550/370/H150 mm -Weight: 68 kg/total

Condition: excellent (used), Safeline Twin head metal detector Kdedpfxjnbfhzs Ag Usg Serial: 115464 Stainless twin lane metal detector, ferrous in foil head, belt dimensions 2100mm x 100mm, aperture 150mm x 160mm, with pneumatic blow reject into reject bin, bin full sensors, 3Ph

Condition: excellent (used), Wire electrode, aluminum welding wire, aluminum welding rod made of aluminum-magnesium alloy -Net weight: 7 kg -Quantity: 1 package available Kdsdpfxscbkklo Ag Ueg -Total weight: 7.6 kg

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter Kjdpfxsb E S I Tj Ag Ujdg -Diameter: 200 mm -Number of teeth: 12 -Indexable inserts: Carbide -Recording: SK50 -Dimensions: 200/200/H330 mm -Weight: 19 kg

Condition: used, machine/vehicle number: 07180398, Inert gas welding device, inert gas device -Max. Welding power: 340 A. -4 roller drive -Water-cooled -Incl. Ground cable -with removable wire feeder -Hose package length: 4000 mm -Dimensions: 1100/515/H1170 mm -Weight: 214 kg Kdodpsb Hiy Sjfx Ag Uog

Condition: used, welding rectifier, electrode welding device, electrode welding machine, electrode welding rectifier Kedpouxg Idofx Ag Usdg -Manufacturer: ESAB, welding rectifier type LHE 260 -Welding power: max. 260 A -Welding cable with electrode clamp -ground cable -Dimensions: 710/480/H865 mm -Weight: 119 kg

Condition: used, cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter Kdodpfx Agju Ridle Usg -Manufacturer: Seco, Secodex face milling cutter head without indexable inserts -Type: Secodex R220.13-8160-C -Hole diameter: 50 mm / bolt circle diameter 67 x 14 mm -Dimensions: Ø 173 x 60 mm -Weight: 5.3 kg

Condition: good (used), Boring head, spindle head, drilling head, plunge drilling head, grooving head, spindle drilling head, boring head, universal boring head, boring tool, facing head -Manufacturer: Schmid, plan and boring head Kdjdperzvwwefx Ag Usg -Type: UBS Gr.1 -Intake: SK40 -Setting accuracy: 0.02 and 0.01 mm -Accessories: see photos -Dimensions of the case: 240/125/H100 mm -Total weight: 4.0 kg

Condition: good (used), Measuring probe, measuring probe, 3D probe, probe insert, measuring probe head, Digimatic Indicator, scanning head, measuring head, universal 3D probe -Manufacturer: Garant Eroglu, scanning head Kjdetu Rktepfx Ag Uodg -Recording: Eroglu HSK 63-08-65 -Reading accuracy: 0.01 mm -Dimensions: Ø 63 x 310 mm -Weight: 0.9 kg

Condition: good (used), Barrel lifter, barrel handling, barrel gripper, barrel lifter, barrel handling, barrel gripper -Drum lifter with: gripper head -Load capacity: kg -Suitable for: 1 x 200-L steel bung drums, steel lid drums, rolling hoop drums -Reception: 410 mm -Automatic opening when: setting down the barrels -Number: 2x grippers available -Price: per piece -Dimensions: 340/305/H900 mm Kdedpfx Ajd Aghksg Ueg -Weight: 47 kg

Condition: used, Stick electrodes 4.0 x 350 Kdodpfxed Elvqe Ag Ujg -Type: FOX DMO Kb -Price: per package -Number: 7 packages available -Weight per package: 4.6 kg

Condition: good (used), Stick electrodes 4.0 x 450 -Type: FOX EV 50 -Analysis: C .07 Si 0.5. Mn 1.1% -Price: per package Kdedpfjd Elvzox Ag Ueg -Number: 17 packages available -Weight per package: 5.8 kg

Condition: good (used), Year of construction: 1984, Multi-spindle head, multi-spindle drill head, drilling gear -Joint multi-spindle head -Max. x drill -7x drill built-in collet: mm -min. Distance drill: mm -Weight: 11.3 kg Articulated multi-spindle heads are: variable tools for various machining operations such as drilling, thread cutting, countersinking, reaming, milling, turning, with which several holes can be machined at once. Kdsdpodym D Tjfx Ag Uog

Condition: good (used), Wire electrode, welding wire, welding wire -Material: stainless steel -Welding wire: 307 -Diameter: 0.8 mm Kodsfnr Itopfx Ag Usdg -Quantity: 1 roll 15 kg 1 roll approx. 5 kg -Price: complete -Dimensions: Ø 300/100 mm -Weight: approx. 21 kg

Condition: used, TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Ess, TIG and hand electrode welding machine, water-cooled -Type: THYROARC 3 AC/DC direct/alternating current -incl.: ground cable, gas fitting, hose package 7500 mm long -Welding power: max. 280 A, see nameplate Kedjfwg H Hopfx Ag Usdg -Dimension: 1300/570/H900 mm -Weight: 262kg