Used Welding Equipment for sale (41,649)

Condition: like new (used), Year of construction: 2013, functionality: fully functional, total width: 1,100 mm, total length: 3,200 mm, total height: 1,900 mm, type of input current: three-phase, label length: 250 mm, overall weight: 350 kg, year of last overhaul: 2013, power: 1.5 kW (2.04 HP), Make: Langguth Type: E20 Stainlessteel frame Capacity: Up to 6,000 BPH (depending on label-length) Range: Diameter 60 to 99mm Label length 80 to 250mm Dimensions: L x W x H = 3200 x 1100 x 1900 mm Weight: 400 kg Power-supply: 400 Volt - 50 Hz Tooling: Including tooling for one (1) label size Features: Control panel with operating elements Adjustable label-magazine (Height and width) Safety housing machine was completely rbuild in 2012 with stainlessteel frame Glue heating 160mm hight glue roll minimum used. Ijdpfxsr Ixrre Aacjih excellent condition

Year of construction: 1994, condition: used, Serial number: 9xxxx Please contact ATS Norway for more information Isdpjwvzirjfx Aacsih Please provide reference number upon request: 20864 Specifications: - 1994 model - Rod changer - Hc150 hammer - 2500 kg - Km-mount - Vacum cleaner - Tilt cylinder - Grease nipple - Control panel w/ cable - Magazine - Ready for delivery Description: We have a 1994 model Montabert CPA500 drilling tower with HC 150 hammer for sale. According to the owner, everything works as it should. The tower is controlled via a panel with cable, which is permanently mounted on the machine. The hammer has run approx. 100 hours since the last overhaul. Extra support legs have also been welded on to raise the tower off the ground when using other equipment. Ready for delivery Own weight: 2500 Model: CPA500 boretårn m/ hc 150 hammer

Condition: used, continuous power (apparent): 50 kVA, short-circuit current: 31 A, input voltage: 380 V, overall weight: 420 kg, welding power (max.): 126 kVA, Dear Sir or Madam, Below we offer you a DALEX spot welding machine "PMS 10-4", used and in very good condition. Technical data and dimensions: errors excepted. Prices are quoted: plus VAT ex stock, loaded free truck. Delivery time: immediately available from stock, subject to prior sale. Iedpfx Aswtr Exeacsih Payment: advance payment. For further details, see PDF.

Condition: used, functionality: fully functional, Fronius TransSynergic 450 MIG MAG Maximum welding current: 450 amperes Voltage: 400 volts, 3-phase Control method: synergic with automatic wire adjustment Wire diameter: 0.8 to 1.6 mm Duty cycle: approximately 60 to 80 percent at maximum current Suitable for steel, stainless steel, and aluminium Cooling: water-cooled. Optional: Seven rolls of 1.2 mm aluminium welding wire included. Iedpfoxnvvnox Aacoih

Year of construction: 2015, condition: excellent (used), Mecasonic MCS2 CAB ultrasonic welding system - Very good condition - Year of manufacture: 2015 - 3 units available Iodpfx Aasvvw Ekscjih - CE declaration of conformity given - Condition: Incoterms EXW CH-4528 Zuchwil - Loading options available

Condition: good (used), Year of construction: 2005, URBAN Welding and Cleaning Line type CC 16/43-26/23 consisting of Welding Machine AKS 1600 and Polishing Machine SV 430. Iiedpfx Aaovyqbmeceh

Condition: new, table length 3000 mm table width 1500 mm table height 200 mm Iisdpfx Aajgvkc Necjh weight of the machine ca. 1,6 t The Professional 750 3000x1500x200 mm table has a diagonal hole arrangement on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X

Year of construction: 2003, operating hours: 3,323 h, condition: used, Serial number: AII66xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20507 Specifications: - 2003 model - 3323 hours - 7.25 bar - 22 kW - 450 kg - Uncertain condition Iedpfx Aajwphrmscjih - Ready for delivery Description: We have a 2003 Atlas copco GX22 compressor in uncertain condition for sale. The compressor has not been used for a few years, but worked the last time it was used. Therefore, it is sold as in unknown condition. So some additional costs can be expected. Ready for delivery Hours: 3323 Kw: 22

Condition: new, table diameter 490 mm table load 300/150 kg swivelling range 0-90 manuell Grad table load horiz. 300 Kg table load vert. 150 Kg boring diameter 65 mm table turning speeds 0,4 - 4,0 U/min voltage 230 V total power requirement 0,2 kW weight of the machine ca. 0,1 t Iijdpfjgvkktsx Aacoh dimensions of the machine ca. 0,5 x 0,52 x 0,5 m The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: - Double foot pedal (start-stop/left-right) included - Infinitely adjustable rotation speed of the table - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in the turntable plate - CE marking - Very good value for money

Year of construction: 2018, condition: used, Serial number: 1302xxxx Ijdpfx Aajvgzv Iocjih Please contact ATS Norway for more information Please provide reference number upon request: 19196 Description: Ammann 538 kg vibrating plate for sale. It has stood for less than a year since it was new and not used at all. Everything must work as it should Ready for delivery.

Condition: new, table length 4000 mm table width 2000 mm table height 200 mm weight of the machine ca. 2,5 t Iedoibw Sxjpfx Aaceih - high quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Bore Ø 28 mm - Holes surface 100x100 mm grid - Rounded corners, edges and holes - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Structure reinforced with ribs - Grid lines allow for precise builds The basic equipment foot is available in various lengths. The load capacity of the foot is 2,000 kg.

Operating hours: 2,168 h, condition: used, Serial number: cb0xxxx Iisdpfx Aajwphmksceh Please contact ATS Norway for more information Please provide reference number upon request: 20487 Specifications: - Repair item - 1575 kg - 2168 hours - 7.9 bar - 115 psi - Ready for delivery Description: We have an Equipment Division 140S compressor repair item for sale. It stops when it gets hot according to the owner. Therefore sold as a repair item. Errors and deficiencies exist and some additional costs must be considered. Ready for delivery Hours: 2168 Total Weight: 1575

Condition: new, table diameter 900 mm table load 1 t Iiedpfjgvkikex Aaceh swivelling range 0-135 Grad excentricity 200 mm table turning speeds 0,12 - 1,2 U/min Torque 2000 N/m total power requirement 0,75 kW dimensions of the machine ca. 1,5 x 1,020 x 0,9 m The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Features: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading and trailing behind with eccentric burden - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust construction - CE certificate - The D-HB series includes a remote control with foot pedal for left-right / Start-stop.

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 20721 Specifications: S70 mount, but a little wider For excavator Works as it should Weight: 645 kg 172 Bar Iiodpfxewrl T Tj Aaceh Ready for delivery

Condition: new, table length 2400 mm table width 1200 mm table height 200 mm weight of the machine ca. 1,0 t The table Professional 750 Article no. 2400x1200x200 mm has a diagonal hole arrangement on the table top and a parallel hole arrangement in 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Grid lines at a distance of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Iijdpegvkfvjfx Aacsh Including 4x feet Basic equipment 650 Article no. 280858.X

Year of construction: 2017, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21004 Specifications: Manufactured in 2017 Net weight: 114 kg Max pressure: 9.6 bar Extra hose set and nozzle Feeder replaced Works as it should Ready for delivery Iiedpjwzrp Hefx Aacjh Own weight: 114

Condition: new, table length 2400 mm table width 1200 mm table height 200 mm weight of the machine ca. 1,0 t The table Professional Extreme Article no. 4-280030.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at a distance of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Iiodpfogvkfyex Aacoh Including 4x feet Basic equipment 650 Article no. 280858.X

Year of construction: 2023, condition: used, Serial number: 202231xxxx Please contact ATS Norway for more information Please provide reference number upon request: 19326 Specifications: - 2023 model - Unused, stored inside - Grinding equipment for blades - Automatic data generator - Bought and installed by Norwood Description: It was bought in 2023 and is unused. stored inside all the time. Iiedpfxsvg Ardo Aacoh It is sold and fitted by Norwood. Automatic data generator. Can be delivered within a short time.

Condition: new, table diameter 560 mm table load 0,3 t swivelling range 0-90 Grad table turning speeds 0,25 - 4 U/min Torque max. 360 N/m centre of gravity max. 150 mm total power requirement 0,4 kW The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Characteristics: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading or trailing behind with eccentric load - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust construction - CE certificate - The D-HB series includes a remote control with foot pedal for left-right / Iedpfx Aogvkgtoaceih Start-stop.

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21085 Description:Various laboratory equipment supplied by HECO for stone quality control.Sold together with the container.The equipment was recently in use and is functioning properly.A complete equipment list is attached as an image.Quick delivery possible. Own weight: 3000 Iijdpfjw Nvgkex Aacjh Model: Laboratorieutstyr til steinprøver

Condition: new, table diameter 350 mm table load 0,1 t swivelling range 0-90 Grad table load horiz. 100 kg table load vert. 50 kg boring diameter 30 mm table turning speeds 0,5 - 5 U/min voltage 230 V total power requirement 0,2 kW weight of the machine ca. 0,2 t dimensions of the machine ca. 0,5 x 0,5 x 0,5 m Iijdpfjgvkk Nox Aacsh Welding table with hollow shaft D-DWP Tilt and turn tables with bore for turning, tilting and welding small workpieces from 100 kg. - Rotation and tilt axis - Infinitely variable speed - Compact model - Incl. Foot pedal

Year of construction: 2020, operating hours: 1,000 h, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 20782 Specifications: Isdpfxewvzkcj Aacjih Model year: 2020 Operating hours: Approx. 1000 Voltage: 400 V Frequency: 50 Hz Automatic feed screw Delivered with fully overhauled rotor Includes extra discharge screw Ready for delivery Description:Tiger Depack HS10 biopress, model year 2020.According to the owner, the machine has been used for a maximum of 1000 hours. The rotor has been recently overhauled, and an extra discharge screw is included. The machine is in full working condition and ready for immediate delivery. . Hours: 1000 Own weight: 4700 Model: Depack HS10

Condition: new, table diameter 690 mm table load 500 kg swivelling range 0 - 90 Grad table load horizontal 500 Kg table load vertikal 250 Kg Iijdpfx Aoh Evt Ujacoh boring diameter 100 mm table turning speeds 0,2 - 1,9 U/min total power requirement 0,37 kW The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: - Double foot pedal (start-stop/left-right) included - The new welding table D-BYT-500N includes, in addition to the standard start/ Stop foot pedal also an extra remote control (on the cable). - Infinitely adjustable rotation speed of the table - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in the turntable plate - CE marking

Year of construction: 2010, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21293 Specifications: Approx. 2010 model S70 coupling Functions as it should 645 kg 172 bar Ready for delivery Ijdjxb N Dxopfx Aacjih Own weight: 645 Model: HS11000

Year of construction: 2019, condition: used, Serial number: 180801xxxx Please contact ATS Norway for more information Please provide reference number upon request: 13218 Specifications: - 2019 model - 25 kW Iiedpow Ia I Nefx Aacsh - Combi attachment, 40 and 50. - Ready for delivery - 1.20 m blade / digging depth Description: Digga chain digger sold for customer. Combination attachment with 40 and 50 attachment. Own weight: Kw: 25 Model: BFT2