Used Welded Beam for sale (9,860)

Condition: like new (used), DESCRIPTION Drilling beam for Jonsdorf dowel drilling machine Isdpfx Agoivau Ao Dja spindle number 27 pcs. Drill bit receptacles Ø10 mm grid 32 mm

Year of construction: 2024, condition: new, Beam Cutting Machine with receding beam Cutting Area 1800x1200 mm Iodsim R N Uspfx Ag Dea Cutting force 130 Tons

Year of construction: 1991, condition: ready for operation (used), These are 21x21 inch and 30x42 inch warp beams, for direct warping and knitting mills. With documentation, without accessories. No defects known, last overhauled. An on-site inspection is possible. Iedpfxow Tl Irs Ag Dea

Condition: excellent (used), Walking beam-forging furnace, make Ruppmann Isdpsid Im Ejfx Ag Dsa max. temperature: 1.250°C useable dimensions (l x w x h): 3.400 x 1350 x 120 mm throughput: 1 ton/h heating: natural gas Heating thru 4 hot air radiant ceiling Bloom burners, with flame monitoring by Kromschröder burners. Temperature measurement by thermocouples, as well as automatic and stepless temperature control. Heat exchanger, combustion air fan.

Year of construction: 2022, condition: excellent (used), Crane spreader beam, Wewira, 3 tons - second-hand : Ijdpfx Agoq Tqm Ts Dja Price ex location: 6.500.-€ (net)! Manufacturer: Wewira Type: Equalizing spreader beam Year of construction: 2022 6.000mm 6 hooks Load capacity: 3.000kg New price, 7.800.-€ (net) Condition: very good - basically unused! - Classic bad buy! Is currently only a little dusty! Available: immediately Location: 79206 Breisach am Rhein

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 40,000 W, travel distance X-axis: 3,500 mm, travel distance Y-axis: 28,000 mm, travel distance Z-axis: 850 mm, overall weight: 5,000 kg, Equipment: cooling unit, X axis travel distance (mm): 3500mm Y axis travel distance (mm): 28000mm Z axis travel distance (mm): 850mm A axis travel distance (mm): ±90° C axis travel distance (mm): ±90° U axis travel distance (mm): 30mm Maximum speed: 40m/min Positioning accuracy: ±0.1mm Support steel types: H-beam, channel steel, I-beam, T-beam, angle steel Iodpfx Agsvzyf Do Dea Maximum size of steel section: 1000mm*400mm Maximum weight of steel: 5tons

Condition: used, Load capacity 10t Iodpfx Agstq Siis Dea

Year of construction: 2009, condition: good (used), Crane/lifting beam/-traverse - Konecranes - Year of construction: 2009 Very good used condition. The inspection can take place at the factory by appointment. Description: - Load capacity: 300 tons - Range / distance of the attachment points: 15.500 mm - Net weight: 23 tons - Load double hook no.63 The lifting process is carried out with 2 cranes, which have a lifting capacity of of 230 and 100 t. The total load of 322 t is achieved by lifting ratio Iedpsm Tm H Hsfx Ag Doa 4.7/10.8 R1 = 322*4.7/15.5 = 98 tons and R2 = 322-98 = 224 tons to the cranes according to the load capacity. Construction drawings available. There is no guarantee for correctness and completeness of the technical details and accessories. - Subject to prior sale -

Condition: ready for operation (used), Year of construction: 2004, Max. punching force: 500kN, max. punching stroke: 200mm, die support dimensions: 13,200x1500mm, conveyor belt dimensions: 7435x1995mm, max. punching area: 1800x750mm, max. strokes: 80/min, connected load: 34kVA, length: 6500mm, width: 3900mm, height: 2900mm, net/operating weight: 7.8/10.2t, operating hours: 52,680h, with documentation. Equipped with extraction system, rotatable tool enabling nesting, tension-free unwinding possible. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible. Ijdpfsw Sxyfjx Ag Dea

Condition: used, machine/vehicle number: 96016105, reach 7 metres connection 12 Volt Isdpfx Agof R Tgvj Doa space requirement 280 x 180 x 320 mm weight approx. 3.5 kg *devices are tested* 5 units on stock  - price per unit -  

Condition: new, Beam Cutting machine with automatic Cutting table 2000x1200mm cutting area 160 Tons Cutting force incl. low point stopper and die clamps at the beam Iedpfxoh Hauro Ag Dja

Year of construction: 1993, condition: used, machine/vehicle number: 93 - 034, Beam press for gluing blocks, max. pressing dimension 2,240 x 880 mm, Ijdeul Uy Hjpfx Ag Dsa motorized height-adjustable counter bearings, 4 pressure beams, can be switched on and off individually, 4 pendulum grids, ex location Seevetal, Sold in "as is" condition as viewed, without transportation, subject to prior sale

Condition: excellent (used), PANEL BEAM SAW WITH REAR LIFTING TABLE Numerical Control Power Control (CADmatic 4.1 - Professional) Lifting scissor table (mm) 4300 x 2200 Rear pushers (N.) 1 With clamps / grippers (No.) 7 Iodpfjd Nt N Usx Ag Dsa Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 6750 Max blade projection (mm) 110 Scoring Unit (max saw diameter / power) mm 180 / Kw 2,2 Main Sawing Unit (max saw diameter / power) mm 420 / Kw 18 Adjustable speed of the saw carriage (m/min) 1 - 150 Front supporting tables with Air blowing system (No.) 3 + 1 long Total power (Kw) 28 OPTIONAL: No. 1 Printer for labels Optimizing Software Schnitt Profi(t) Practive

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, working length: 3,000 mm, working width: 2,030 mm, total width: 1,100 mm, total length: 3,300 mm, total height: 2,720 mm, table width: 120 mm, overall weight: 1,200 kg, Edge Press, Beam Type SCM Falcon/S Specifications: • Condition – Used, after inspection • Manufacturer – SCM • Model – Falcon/S • Maximum gluing dimensions – 300 x 203 cm • Remote control for pistons (independent vertical and horizontal control) • Double-T beams, 12 cm wide • Two vertical pistons with 60 mm diameter and two smaller horizontal pistons with 35 mm diameter • Maximum vertical piston pressure – approx. 15,000 kg • Maximum horizontal piston pressure – approx. 5,000 kg • Maximum pressure – 160 bar • Pump motor – 3.0 kW • Year of manufacture – 2002 • Overall dimensions: 335 x 110 x 272 cm (L x W x H) Ijdsxn Tqvspfx Ag Doa • Weight – approx. 1,200 kg Additional information: • Very good, factory technical and visual condition • The photos shown represent the actual item for sale • Possibility to power up and inspect the machine on site.

Condition: ready for operation (used), Year of construction: 2000, Max. punching force: 300kN, max. punching stroke: 200mm, max. punching area: 1800x750mm, connected load: 11kVA, length: 4800mm, width: 3400mm, height: 2800mm, net/operating weight: 10/13t, operating hours: 2818h, with documentation. The control was renewed in 2022. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible. Isdpew Sxylefx Ag Dja

Year of construction: 2012, condition: used, maximum capacity load 2,000 kg flange width 66 to 220 mm flange thickness 25 mm maximum Iedpfscw Tykjx Ag Doa smallest curve radius 1.15 m manual force at nominal load 7 kg weight approx. 16 kg 16 units on stock - price per unit

Year of construction: 2020, condition: new, Beam Cutting Machine with automatic table Iodpfx Agefubr Hs Dsa Cutting Area 2000x1000mm Cutting Force 200 Tons

Condition: excellent (used), PANEL BEAM SAW WITH REAR LIFTING TABLE Numerical Control Power Concept Software CADmatic 4 Professional Lifting scissor table (mm) 4300 x 2200 No. 2 Rear pushers (TWIN PUSHER) Mod. POWER CONCEPT With clamps / grippers RETENTION DEVICE FOR THIN PANELS (Minimum thickness 3 mm) Ijdpfx Ajimr Icsg Doa Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 95 (automatic) Scoring Unit (max saw diameter / power) 180 / Kw 2,2 Main Sawing Unit (max saw diameter / power) 380 / Kw 13,5 (Max 18) Adjustable speed of the saw carriage (m/min) 1 - 150 Front supporting tables with Air blowing system (N.) 4 Total power (Kw) 28 OPTION: - Software Cut Rite (optimizzazione/optimisation) SCHNITT PROFI (T) PACKAGE: PRACTIVE - Labels Printer (Option) - Software LABELING PACK BR 3/4/5 (etichette/labels)

Condition: ready for operation (used), Year of construction: 2003, Max. punching force: 500kN, max. punching stroke: 200mm, max. punching area: 1800x750mm, connected load: 39kVA, length: 6500mm, width: 3900mm, height: 2900mm, net/operating weight: 7.8/10.2t, operating hours: 56,645h, with documentation. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible. Iedow Sxyropfx Ag Dsa

Condition: excellent (used), Panel Beam Saw - With rear lifting table Numerical Control POWER CONTROL Software CADmatic 4 Professional Lifting scissor table (mm) 3800 x 2200 Rear pushers (N.) 1 With clamps / grippers 7 Turning device (rotating unit) at 90° Max. cutting width (mm) 3800 Useful stroke of the pushing system (mm) 3800 Max blade projection (mm) 95 Ijdpfx Agsh Imvhs Dja Scoring Unit (max saw diameter / power) mm 180 / Kw 2,2 Main Sawing Unit (max saw diameter / power) mm 380 / Kw 13,5 Adjustable speed of the saw carriage (m/min) 1 - 130 Front supporting tables with Air blowing system (N.) 3 (2160mm x 650mm) Total power (Kw) 28 (ca.)

Condition: ready for operation (used), A cart beam die-cutter Schön is available for die-cutting envelopes, leather, textiles, foams, rolls and sheets. Pressing force: 300kN, max. sheet format X/Y: 1400mm/1000mm, pressure plate rotation speed: 200°/s, repeat accuracy: +/-1°, return stroke speed: 200mm/s, machine dimensions X/Y/Z: approx. 4200mm/2500mm/2500mm, weight: approx. 5500kg. Documentation available. On-site inspection is possible. Iedpfsw Azuuex Ag Doa

Condition: excellent (used), YZ0105) PANEL SAW WITHOUT REAR LIFTING TABLE Mod. HPP 300/56/56 PROFILINE Numerical Control Power Control POWER TOUCH. Software CADmatic 4 - Professional Rear pushers (N.) 1 - (PACK PREMIUM). With No. 11 clamps / grippers (1 x Power Concept) Max. cutting width (mm) 5600. Useful stroke of the pushing system (mm) 5600 Max. blade projection (mm) 80 Scoring Unit (max. diameter saw / power) mm 180 / Kw 1,5 Main Sawing Unit (max. diameter saw / power) mm 350 / Kw 11 (option Kw 18) Adjustable speed of the saw carriage (m/min) 1 - 150 No. 5 Front supporting tables with Air blowing system (mm 500 x 2810) Labels Printer: PICA II 108 YZ0106) AUTOMATIC REAR STORAGE SYSTEM for PANELS Mod. TFL 211/10/05 Total Space Required (with panel saw) mm 10640 x mm 55660 Mobile upper bridge (on X-axis), with mobile carriage (on Y-axis) and relative vacuum suction cup assembly (mobile on Z-axis) max. speed Mobile upper bridge (on X axis) 110 m/min moving carriage speed (on Y axis) 130 m/min vacuum suction cup group speed (mobile in Z axis) 70 m/min Vacuum suction cup group, 90° rotating Automatic management system TLF (by scanner) of the cut panels (but remaining in the warehouse) minimum dimensions mm 800 x mm 2000 Iodpfjfg Ewzsx Ag Dsa Stack dimensions Min mm 2600 x mm 800 / Max mm 5600 x mm 2200 Stack height: mm 1000

Condition: ready for operation (used), Max. workpiece thickness: 20mm, including one unused and originally packed set of blades. Ijdpfx Agoim Ixfj Doa

Condition: excellent (used), Panel Beam Saw - Without rear lifting table Numerical Control MCS Evolution Software Windows XP Rear pusher With No. 7 clamps / grippers Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) _____ Max. blade projection (mm) 105 Max clamps opening (mm) 105 Ijdsu A R D Dspfx Ag Dsa Scoring Unit (max. diameter saw) mm 200 Main Sawing Unit (max. diameter saw / power) mm 360 - Kw 18 Adjustable speed of the saw carriage (m/min) 0 - 160 No. 3 Front supporting tables with Air blowing system Total power (Kw) 35

Year of construction: 1999, condition: ready for operation (used), With cryogenic cooling system, was maintained regularly, including spare parts and extensive documentation. Iedpfx Agehr Dz Hs Doa