Used Weinig Profimat 22 N for sale (471)

Condition: excellent (used), functionality: fully functional, power of feed motor: 11,000 W, Hydraulic feed from Weinig Gbedpfx Asv Skbkshvjw Feed speed 120 m/min Motor power 11 kW

Condition: excellent (used), WEINIG Unimat 23 E four-side planer Maximum planing width: 230mm, Maximum planing height: 130mm, 5 spindles, Manual adjustment of planing dimensions, Spindle arrangement: bottom 7.5kW; left and right 11kW; top 11kW; bottom 7.5kW, Motors with brakes, Spindle diameter: 40mm, Fully adjustable spindles, Machine equipped with 4 feed rollers on the table, suitable for wet timber, Feed via cardan shafts with stepless regulation, Machine supplied with the heads shown on the spindles, Cardan shafts not worn, tables unworn, runs smoothly without vibrations or oscillations, Gedpfx Ahjxvc Uasvsbw Robust planer in original condition, weight approx. 5t. Very good condition, everything works.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Fully working UniControl 12 year 2006 from Norway - for exact technical specification please open attached document in PDF below. Cross section UniTec 12: - saw unit - edge round cutter from bottom - Hubspindel no.1 - Hubspindel no.2 - Hubspindel no.3 Long , profile section UniVar 12: - Profil cutter - Profil cutter - Profil cutter horizontal - Profil cutter - Profil cutter - Profil cutter Gedpfx Ajmgc I Nehvobw Total el power 114 kw 400 V AC Need for suction 270 m3/min Need of compressed air 1000 L/ minMachine was in use until 15.08.2023 Payment: Prior to loading Delivery: ex. factory Rendalen - Norway Machine is located in Norway ( near to Trondheim) The machine is now disconnected, stored in dry and warm wearhouse, and are ready to be shipped. Rekman Maskin & Service - service of woodworking machines since 1986.

Year of construction: 1995, condition: good (used), planing width 220 mm planing height 140 mm Gsdpfxog E Uqce Ahvebw tool diameter max 160 mm 2 x 5.5 kW main engines 3 kW feed motor feed speed 6 - 36 m / min - on the inverter feed on cardan shafts heads supported on both sides electric height adjustment

Condition: excellent (used), Multirip saw Gjdotwy Iuopfx Ahvsbw Max. Cutting width 310 mm Chain width 340 mm Max. Passage width / input width 650 mm Max. Cutting height with Quickfix clamping flange 110 mm Saw shaft diameter 65 mm Min. timber length 500 mm Max. Feed speed 35 m/min, variable Motor power 22.0 kW, 400 V, 50 Hz Feed motor 1.3 kW, 400 V, 50 Hz Saw blade diameter min./max. 300/ 350 mm Working height 850 mm Extraction diameter 250 mm Required extraction volume 5300 m3/h Quickfix saw blade attachment Electric height adjustment of the saw shaft Electric height adjustment of the pressure unit Dimensions approx. L x W x H = 1750 x 1750 x 1500 mm Weight 1850 kg Incl options: Oil level monitoring SafetyPlus Quickfix Note for used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: ready for operation (used), Year of construction: 1998, Planing machine ready for operation. A total of 6 spindles. This machine operated flawlessly until the business closed. Planer heads with Cento Lock reversible planer knives. Gjdpfxjw E Echj Ahvjbw

Condition: good (used), Year of construction: 1998, functionality: fully functional, spindle diameter: 40 mm, working width: 230 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 36 m/min, planing width: 20 mm, height adjustment type: electric, planing height: 160 mm, working height: 8 mm, Equipment: cabin, motor brake, Weinig Unimat 23 E 6 Head planer moulder. Bottom head - 10hp Fence + near head -15hp (common motor) 1st top head - 15hp 2nd top head - 15hp Gsdpfxev A Rpco Ahvsbw 2nd bottom head - 10hp Spindle speed - 6000rpm Feed speed - min/5 + max/36 meters per minute Working width - min 20mm + max 230mm Working height - min 8 mm + max 160mm Spindle diameter - 40mm The machine is currently still in use and viewing is more than welcome.

Condition: excellent (used), CATALOG NUMBER 6674 TECHNICAL SPECIFICATIONS - Max planing width: 150 mm - Max planing height: 130 mm 7 spindles: 1) bottom horizontal, 150 mm, 3 kW 2) right vertical, 130 mm, 3 kW 3) left vertical, 130 mm, 4 kW 4) top horizontal, 150 mm, 4 kW 5) bottom horizontal, 150 mm, 3 kW 6) right vertical, 130 mm, 4 kW - Spindle diameter: 35 mm (all spindles) - All spindles adjustable up/down and right/left - 4 driven toothed feed rollers from above - 4 top rubber outfeed feed rollers - 2 top pressure rollers - Electric planing thickness adjustment: 0.25 kW Gsdpfx Aheiba Evovjbw - Infeed table length: 1970 mm - Central table lubrication - Stepless feed speed adjustment - Feed motor: 1.5 kW - Extraction port diameters: 6x120 mm - Dimensions (LxWxH): 4000x1300x1600 mm - Weight: approx. 3000 kg – German manufacture – 6-head machine – Used moulder/planer in very good condition Net price: 36,900 PLN Net price: 8,790 EUR Net price based on 4.2 PLN/EUR exchange rate (Significant currency fluctuations may cause price adjustments)

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 116387, planing height: 160 mm, planing width: 260 mm, total width: 145 mm, total height: 170 mm, total length: 375 mm, workpiece weight (max.): 2,100 kg, workpiece height (max.): 160 mm, compressed air connection: 8 bar, type of input current: three-phase, workpiece width (max.): 260 mm, input voltage: 400 V, table length: 2,500 mm, number of spindles: 4, extraction connection diameter: 250 mm, power: 18 kW (24.47 HP), input frequency: 50 Hz, input current: 63 A, Equipment: motor brake, Weinig Cube 4-sided planing machine for sale. Offered for sale due to very little use in our workshop. Originally supplied and always serviced by De Groot Bewerkingmachines. Machine operates perfectly. Currently disconnected and packed, but can be demonstrated in operation upon serious interest. Year of manufacture: 2011 Weight: 2,100 kg Connection value: 400V 63Ah Air pressure: 8 bar Power: 18 kW (25 hp) Extraction connection: 250 mm 1x Max. planing width: 260 mm Max. planing height: 160 mm Minimum planing length: approx. 400 mm Infeed table length: 2,500 mm All values adjustable via touchscreen display Visible removal indication by laser lines Total machine length: 375 cm Total machine width: 145 cm Total machine height: 170 cm Gbjdpfx Aoxhcizjhvsw Incl. planing heads with knives. This is a good quality machine.

Condition: good (used), Year of construction: 1974, old but stable casting machine planing width 50 cm table 250 cm long Gsdpfx Ajturkyohvebw 2 cutterblocks

Year of construction: 1999, condition: ready for operation (used), A four-side planer Weinig is available. Working width: 230mm, working height: 120mm, feed rate: 24m/min, machine dimensions X/Y/Z: approx. 3500mm/2000mm/2000mm, weight: approx. 3500kg. An on-site inspection is possible. Gjdpfxoxpw Uhe Ahvjbw

Condition: used, Year of construction: 2010, functionality: unexamined, Weinig RS 2000 Godpfxjwmw Das Ahvobw

Condition: like new (used), Year of construction: 2005, functionality: fully functional, working width: 230 mm, planing height: 120 mm, planer shaft diameter: 40 mm, workpiece height (max.): 120 mm, Weinig Unimat 300 — 4-sided planer 230 x 120 mm Although from 2005, this machine is practically like new! Rarely have we seen one so little used. Gedsxak N Hepfx Ahvobw Looking for an almost-new 4-spindle planer but don’t have the budget for a new one? This Unimat 300 is the perfect pick!

Condition: excellent (used), CATALOG NUMBER 7221 TECHNICAL SPECIFICATIONS Godpfx Ahjq Nnpfsvjbw - min / max working width: 45 / 150 mm - min / max working height: 15 / 50 mm 3 spindles: 1) lower horizontal 11 kW 2) upper horizontal 22 kW (7000 rpm) 3) lower horizontal 5.5 kW spindle diameter: 40 mm - spindles 1 and 3 adjustable manually up/down, left/right - spindle 2 adjustable manually left/right - spindle 2 adjustable electrically up/down - spindles 2 and 3 equipped with brakes Top section: - 3 infeed, driven, metal toothed rollers - 1 outfeed, double, driven, rubber roller Bottom section: - infeed pressure device - grooved table - driven, smooth metal roller - electric thickness adjustment - variable feed speed: 6-24 m/min - feed motor: 3 kW - feed via Cardan shafts - infeed table length: 1970 mm - automatic table lubrication system - extraction port diameter: 1x150 mm, 2x140 mm - dimensions (LxWxH): 3070x2000x1800 mm - weight: 2000 kg ADVANTAGES – Made in Germany – With 3 heads – For processing lamellas – Grooved table – Complete set of cutter heads included – Unpainted – Very good condition – Used planer Net price: 125,900 PLN Net price: 29,980 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the event of significant exchange rate fluctuations, the price may be subject to change)

Condition: used, Year of construction: 2009, max. workpiece length 4500 mm profile spindle 1 Stück main drive 20 kW Control Siemens Weinig Conturex 2 C 114 ----- Working width: 40-260 mm Working height: 25-110 mm 2 x PowerGrip clamp tables, 2 x 2280 mm ----- Workpiece length 200 - 4,500 mm Workpieces over 2,700 mm in length are machined using a repositioning cycle. Main spindle 1: ----- Motor with brake 20 kW HSK 63F Electronically adjustable speed 2,000-18,000 rpm Maximum tool length from flat surface HSK 63 F: 290 mm With C-axis Tool magazine: ----- Number of pockets: 30 mm Pitch between pockets: 100 mm Permanently installed multi-spindle drilling head ----- For horizontal and vertical drilling and milling work without tool changes ----- Price ex-site Prices for disassembly and loading onto customer trucks Transport within Germany and abroad as well as reassembly Commissioning and, if required, new profiles are available upon request! Used tools included (drawings available upon request): ----- Wood: IV 68, 78, 88, opening inside and out, with hinged weatherboard Wood-aluminum: IV 68/68, 78/78, 87/68, 97/78 Lift-and-slide doors IV 68 and 78 Front doors IV 68 and 78 Pivot windows Corner connection: counter/dowel Technical specifications according to the manufacturer - no guarantee! Gbedpfx Aewunwyshvow Detailed technical description available upon request!

Condition: good (used), Year of construction: 2008, Raimann FlexiRip 4200 rip saw - German production, user manual Gbedpfx Ahjhzg Agevow - year of production 2008 - automatic material collection TECHNICAL PARAMETERS: cutting length max. 4200 mm cutting width max. 600 mm cutting height max. 130 mm feed continuously adjustable up to 80 m / min main engine power 11 kW disc diameter max. / min. 600 mm / 400 mm 100 dimensions can be programmed line laser two-stage blade feed touch panel control stub diameter 2 x 160 mm dimensions of the machine (length / width / height) 620/160/220 cm weight 2250 kg

Condition: ready for operation (used), functionality: fully functional, grinding width: 240 mm, type of input current: three-phase, Knife grinding machine WEINIG Rondamat 168 Max. tool diameter 3500mm Disk diameter 150mm Gedpfoufcnqsx Ahvebw Tool length 240 mm Main cutting edges up to 25° Motor 1, 1 kW

Condition: excellent (used), Catalog number 7289 TECHNICAL DATA - Maximum workpiece width: 230 mm - Maximum workpiece height: 170 mm 6 spindles: 1) Bottom horizontal, 230 mm, 5.5 kW 2) Right vertical, 170 mm 3) Left vertical, 170 mm (spindles 2 and 3), 11 kW 4) Top horizontal, 230 mm, 11 kW 5) Top horizontal, 230 mm, 7.5 kW 6) Bottom horizontal, 230 mm, 11 kW - All spindles adjustable up/down, left/right - Spindles 4 and 5 electrically adjustable up/down - Spindle speed: 8,000 rpm - Spindle diameter: 40 mm - All spindles equipped with electric braking - 6 feed-in, driven, toothed upper rollers, including 1 double - Double exit, driven, rubber-coated upper roller - Double exit, driven, rubber-coated lower roller - Side pressure unit - Feed via Kardana shafts - Pneumatically tensioned rollers - Infinitely variable feed speed: 6–24 m/min - Feed motor: 4 kW Gsdpferwmr Nex Ahvobw - Electric planing thickness adjustment - Body lifting motor: 0.55 kW - Central table lubrication - Extraction nozzle diameter: 6 × 140 mm - Dimensions (L×W×H): 4,900 × 2,400 × 2,000 mm - Weight: approx. 4,000 kg FEATURES – German-made, WEINIG brand – With 6 heads – Not repainted – Used planer, very good condition Original pictures Net price: PLN 142,900 Net price: EUR 34,000 (based on an exchange rate of 4.2 EUR) (Prices may vary with significant exchange rate fluctuations)

Condition: used, Year of construction: 2014, Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 600 Compact ----- The machine will be cleaned and completely checked before delivery. Brief Summary: ----- - 5 spindles - Powerful motors - Left and upper spindles controlled for width and height Detailed Description: ----- Technical Specifications: Working width: 20-230 mm Working height: 10-120 mm Number of spindles: 5 1st spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool travel radius: 125-145 mm Tool travel radius for rebate cutter: 130-160 mm Axis adjustment range: 5 mm Rebate device MarathonCoatin for table insert in front of the 1st lower tool holder Electronic digital display for wheel adjustment 2nd spindle - Right ----- Motor with brake: 11.0 kW Shared motor with left-hand tool holder Spindle diameter: 40 mm Speed: 6,000 rpm Tool cutting radius 40 mm below table level: 93 - 200 mm Tool cutting radius 55 mm below table level: 93 - 180 mm Tool cutting radius for straight cutter heads max. 163 mm Max. tool diameter behind stop level: 180 mm Max. throat depth: 35 mm Axis adjustment range: 55 mm Gedpfx Ahewzmu Rovjbw 3rd spindle - left ----- Motor with brake: Shared motor with the 2nd spindle Spindle diameter: 40 mm Speed: 6,000 rpm Tool cutting radius 40 mm below table level: 93 - 200 mm Tool cutting radius 55 mm below table level: 93 - 180 mm Tool cutting circle for straight cutter heads max. 163 mm Max. throat depth: 35 mm Axial adjustment range: 55 mm Radial CNC-controlled spindle 4th spindle - top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool cutting circle: 93 - 200 mm Tool cutting circle for straight cutter heads max.: 180 mm Max. throat depth: 35 mm Axial adjustment range: 40 mm Radial CNC-controlled spindle Split pressure shoe in front of the upper tool holder, adjustable to the tool cutting circle and pivoting away from the tool, spring-loaded. Pressure shoe before and discharge after the upper spindle with electronic digital displays, integrated into the memory function. 5th spindle - lower ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool cutting radius: 93 - 200 mm Max. groove depth: 15 mm Axis adjustment range: 35 mm Feed system ----- Electronic feed, continuously adjustable with brake: 4 kW, 5 - 30 m/min Feed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers with depth gauge and self-cleaning. Adjustment range of the feed rollers relative to the left tool holder, axial: 35 mm Machine electrical system ----- Operating voltage 400 V (voltage range 380 - 420 V), 50 Hz. All spindles are IE 2 version. Electrical design according to DIN VDE 0113, electrical equipment for industrial machines EN60204, IEC-204-1. Other electrical regulations are not taken into account. Machine stands, tables, and stops -----...

Condition: good (used), Year of construction: 1998, functionality: fully functional, Four-side planer Weinig Hydromat 23, finger jointing machine 8 spindles, Working width: 230 mm, Working height: 160 mm, Spindle diameter: 50 mm, Feed: 7.5 kW / 6–36 m/min, Spindle arrangement: 1-Bottom (7.5 kW) 2-Right (7.5 kW) 3-Left (7.5 kW) with profile jointer 4-Right (7.5 kW) with profile jointer 5-Top (7.5 kW) with hydraulic clamping 6-Bottom (30 kW) with hydraulic clamping Gsdjxqh E Hepfx Ahvebw 7-Top (7.5 kW) with hydraulic clamping and straight jointer 8-Bottom (7.5 kW) with hydraulic clamping and straight jointer. Hard coating. Two powered rollers in the table.

Condition: used, Number of spindles 5 St. Working width 20 - 230 mm Working height 8 - 120 mm Length of the planing table 2000 mm Feed motor 1,1 kW Feed speed stufenlos regelbar 2 - 12 m/min. 1 WEINIG VARIOMAT planer and moulder including multifunction / slotting table ----- Gbodpowugpbsfx Ahvjw Machine will be cleaned and functionally tested before delivery ! Technical manufacturer's description: ----- Working width: 20 - 230 mm Working height: 8 - 120 mm 1st spindle horizontal, bottom ----- Motor with brake: 5.5 kW Diameter 40 mm Speed ??6000 rpm Tool radius 125 - 145 mm Axis adjustment range 5 mm Folding device including rebate cutter MarathonCoating for table insert before and after the 1st lower spindle 2nd spindle vertical, right ----- Motor with brake: 11 kW Common motor with left vertical spindle Diameter 40 mm mm Speed ??electronically adjustable 3000 - 6000 rpm (for 11 kW/15 HP) Tool cutting radius for longitudinal machining 93-232 mm Minimum tool diameter at stop plane: 93 mm Maximum tool diameter behind stop plane: 180 mm Maximum throat depth 45 mm Axially adjustable travel 30 mm Insertion segment, including additional stop lip 125 mm Insertion segment, including additional stop lip 150 mm 3rd vertical spindle, left POWERLOCK/HSK ----- Shared motor with 1st right spindle PowerLock tool holder Shared speed with right vertical spindle Tool cutting radius for longitudinal machining 93-232 mm Maximum throat depth 45 mm Minimum throat depth with tool cutting radius 200 mm: 20 mm Axially adjustable travel under table 30 mm Insertion segment 125 mm Insertion segment 150 mm 4th spindle, horizontal, top ----- Motor with brake: 5.5 kW Diameter 40 mm Speed ??6000 rpm Tool cutting radius 125-200 mm Maximum chamfering depth 30 mm Minimum chamfering depth with a tool cutting radius of 200 mm: 20 mm Axially adjustable range 30 mm Glazing bead removal after the upper spindle 5th spindle, second, horizontal, bottom ----- Motor with brake: 4 kW Diameter 40 mm Speed ??6000 rpm Tool cutting radius 125-200 mm Maximum chamfering depth 15 mm Axially adjustable range 10 mm Machine operation ----- Both axes of all spindles - with the exception of the first lower spindle - are equipped with mechanical digital displays. Central radial adjustment with mechanical digital display of the feed rate along with the pressure in front of the upper spindle. The pressure after the upper spindle can be adjusted separately. Memory function ----- For saving the setting values ??of profiles Tool holder axes and pressure elements before and after the upper tool holder with electronic dual displays: Function: -Saving the setting values ??of the finished profile at the touch of a button under a profile number - When the profile number is selected again, the electronic dual displays show the setting values - By manually adjusting the tool holders and pressure elements, the displays are aligned - 99 memory locations 3 axial CNC-controlled adjustment and positioning of the spindles in conjunction with the memory function. For spindles 2, 3, an...

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ----- The machine renovated and functionally checked ! Short summary: ----- 6 spindles with 8,000 rpm Gsdpfx Ahjuzaa Sevsbw 5 x HSK/Powerlock Axial and radial CNC adjustment of the spindles via control CNC - controlled adjustment and positioning of the feed Detailed description: ----- Technical specifications: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 6 1. Tool holder - below ----- Motor with brake: 5.5 kW Spindle diameter: 40mm Speed: 6,000 rpm Tool flight circle: 93 - 160 mm Axial adjustment range: 5 mm Rebating device MarathonCoatin for table insert in front of 1st lower tool holder 2. Tool holder - PowerLock - right ----- Motor with brake: 11.0 kW Common motor with left tool holder Speed ??including high-performance ball bearing: 8,000 rpm Tool flight circle 40 mm below table level: 93 - 200 mm Tool flight circle 55 mm below table level: 93 - 180 mm Tool cutting circle for straight cutter heads max. 163 mm Max. tool diameter behind stop level: 180 mm Max throat depth: 35 mm Axial adjustment range: 55 mm Spindle axially and radially CNC controlled 3. Tool holder - PowerLock - left ----- Motor with brake: Common motor with the 2nd spindle Speed ??including high-performance ball bearing: 8,000 rpm Tool flight circle 40 mm below table level: 93 - 200 mm Tool flight circle 55 mm below table level: 93 - 180 mm Tool cutting circle for straight cutter heads max. 163 mm Max throat depth: 35 mm Axial adjustment range: 55 mm Spindle axially and radially CNC controlled 4. Tool holder - PowerLock - above ----- Motor with brake: 7.5 kW Speed ??including high-performance ball bearing: 8,000 rpm Tool flight circle: 93 - 200 mm Tool cutting circle for straight cutter heads max.: 180 mm Max throat depth: 35 mm Axial adjustment range: 40 mm Divided pressure shoe in front of the upper tool holder, on tool flight circle adjustable and pivoting away from the tool, spring-loaded. Radial CNC-controlled spindle 5. Tool holder - PowerLock - above ----- Motor with brake: 7.5 kW Speed ??including high-performance ball bearing: 8,000 rpm Tool flight circle: 93 - 200 mm Tool cutting circle for straight cutter heads max. : 180 mm Max throat depth: 35 mm Axial adjustment range: 40 mm Divided pressure shoe in front of the upper tool holder, on tool flight circle adjustable and pivoting away from the tool, spring-loaded. Spindle axially and radially CNC controlled 6. Tool holder - PowerLock - below ----- Motor with brake: 7.5 kW Speed ??including high-performance ball bearing: 8,000 rpm Tool flight circle: 93 - 200 mm Max throat depth: 15 mm Axial adjustment range: 35 mm Radial CNC-controlled spindle feed system ----- Frequency-controll...

Condition: used, Number of spindles 4 St. Number of tools 11 St. Spindle diameter 50,40 mm Spindle length 285,125 mm length 4000 mm width 2000 mm height 2200 mm Weinig Univar 10/3 folding machine ----- For milling around windows, doors and the like with uneven circumferential profiles. Machine suitable for wood thickness 68 to 92 mm Time required per frame milling, medium size 1.20 x 1.20 m - approx. 2 minutes. The available tool positions are selected using a selector switch on the control panel retrieved. Machine with 3 hydraulically controlled right precision Lifting spindles for holding 3 tool sets, 2 x 95 mm spindle stroke per spindle The spindle stroke takes place in a U-movement, so that the opening is possible for short parts The milling stop remains as small as possible. Spindle stroke horizontally fine Adjustable for both tool positions from the operator side. Central lubrication for the spindle units. The 1. Spindle can be selected in right-left rotation. This spindle dips the last 100 mm of each frame end appropriate synchronization tool into the passing wood. Through this This prevents the tool of the subsequent milling spindle from running in the opposite direction working, causing tearouts. Excavation of the first 7 transport rollers using Footswitch. This shortens the lead time. An additional The support rail also allows large-format frames to be milled around. Continuous, chainless rubber roller feed with extreme short roller spacing. Height adjustment of the feed bar electrically readable. Electrical version according to VDE. Machine including operating tools, but without processing tools tools. Technical data: Working width min. 40 mm Working height min. 30 mm, max. 100 mm 1. Profiling spindle (synchronous and counter-rotation) ----- -- Motor strength lifting spindle 11.0 kW Spindle speed 6000 rpm Spindle diameter 50 mm Clamping length 285 mm Tool zero flight circle 112 - 140 mm Max. tool - D : 232 mm Spindle stroke vertical 2 x 95 mm for 3 tools Basic position under table 10 mm (adjustable up to 20 mm) Spindle stroke horizontal 80 mm with synchronous automatic immersion 2. Profiling spindle ----- Motor strength lifting spindle 11.0 kW Spindle speed 6000 rpm Spindle diameter 50 mm Clamping length 285 mm Tool zero flight circle 112 - 140 mm Max. tool - D : 232 mm Spindle stroke vertical 2 x 95 mm for 3 tools Basic position under table 10 mm (adjustable up to 20 mm) Spindle stroke horizontal 80 mm Gbodpfxsvnv Uuo Ahvjw 3. Profiling spindle ----- Motor strength lifting spindle 11.0 kW Spindle speed 6000 rpm Spindle diameter 50 mm Clamping length 285 mm Tool zero flight circle 112 - 140 mm Max. tool - D : 232 mm Spindle stroke vertical 2 x 95 mm for 3 tools Basic position under table 10 mm (adjustable up to 20 mm) Spindle stroke horizontal 80 mm 4. Profile spindle - fitting unit on the right ----- For milling the fitting groove in the milling cycle or for grooving in the longitudinal profile. Pneumatic horizontal movement with Selector switch in the control panel. Motor 2.2 KW Speed 6,000 rpm Spindle diameter 40 mm Clamping height 125 mm, 2 tools Tool flight circle min. 140 mm, max. 180 mm Motor power feed 1.1 kW Feed speed 6 - 12 m/min. ...

Condition: used, Tenoning spindle 1 St. Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig, PC-Nexus # 2774 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and completely checked before delivery ----- Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3 kW > Radial adjustment path pneumatically controlled to 8 positions, e.g. for edge rounding from above > Laser aiming light for detecting the saw section Item 2: Rounding unit horizontal below ----- > Position: horizontal below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length 25 mm > Spindle speed: 9,000 rpm > Max. tool flight circle: 130 mm > Axial adjustment path mechanically coupled with Crosscut saw > Adjustment path radial pneumatically controlled on/off Length stop NC controlled ----- > Length 3500 mm > Electronic length stop Item 3: Tenon and slot spindle ----- > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 3500 rpm > Tool flight circle max. 320 mm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 kW Item 4: 1. Profiling spindle (same and opposite rotation) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW Item 5: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers axially pneumatic opposite the spindle controlled, 2 positions Rung guide consisting of: Guide ruler in the stop (area of ??the synchronous spindle), Rung support bar from above in the area of ??the profile milling unit vertically on the right and profiling spindle. Pos. 6: Profile milling unit horizontal top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??9,000 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions > Radial adjustment range 125 mm, 8 positions Pos. 7: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions > Radial adjustment range 110 mm, 8-way turret > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 210 mm > Motor power: 3.0 kW Item 8: Profile milling unit/grooving unit from below ----- > Motor power: 3.0 kW > Tool clamping length: 125 mm > Axial adjustment range 100 mm, 8 positions Gbsdpfjvu Hghsx Ahvjw > Radial adjustment range 1...

Condition: used, Year of construction: 2000, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 + 500 mm Feed motor 3 kW Feed speed 6-36 m/min. 1 WEINIG Unimat 23 E 4-side Planer and Moulder ----- 6 spindles (2 on the right), powerful motors, EM 11 feed magazine available Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle, bottom 7.5 kW ----- Diameter 40 mm Speed ??6000 rpm Tool travel radius 125 - 180 mm Folding device including tool Hardened table insert in front of 1st lower spindle 2nd spindle, right 11.0 kW ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??6000 rpm Tool travel radius 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axis adjustment range 80 mm 3rd spindle, left Godpowqr Rvjfx Ahvjbw ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??6000 rpm Tool cutting radius 112-200 mm Max. groove depth 35 mm Axis adjustment range 80 mm Pressure shoe in front of left spindle, including lateral roller pressure, spring-loaded 4th spindle, right 7.5 kW ----- Diameter 40 mm Speed ??6000 rpm Tool cutting radius 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axis adjustment range 80 mm 5th spindle, top 11.0 kW ----- Diameter 40 mm Speed ??6000 rpm Tool cutting radius 112-200 mm Max. throat depth 35 mm Axis adjustment range 45 mm Split pressure shoe in front of the upper spindle, adjustable to the tool travel circle and pivoting away from the tool, spring-loaded. 6. Lower spindle 7.5 kW ----- Diameter 40 mm Speed ??6000 rpm Tool travel circle 112-250 mm Max. throat depth 15 mm Axis adjustment range 45 mm Spindles in general ----- All throat spindles with high concentricity. Lubrication points for the axial spindle movement. Spindle length of vertical spindles 170 mm Feed system ----- Motor with mechanical brake, 3 kW Mechanical feed continuously adjustable 6 - 36 m/min. Feed roller in front of the first lower tool pneumatically controlled up-down, Durofer pointed tooth rollers (Weinig patent) with depth gauge and self-cleaning Adjustment range of the feed rollers relative to the left spindle, axial: 35 mm Extension of the oscillating axis relative to the left spindles to 150 mm Machine electrical system ----- Operating voltage: 380-400-415 volts, 50 Hz. Machine stands, tables, and stops ----- Surface table 2.5 m long (including jointing ruler) Aluminum extension 0.5 m for surface table, including extension of the jointing ruler Manual Waxilit pump for resin removal from the table One driven rubber roller (spring-mounted in the outfeed table) Pressure elements and Guides ----- Pneumatic pressure rollers from above Pneumatic pressure rollers pivot away from above, opposite the right-hand spindles for easy tool changes Machine Operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Discharge after the upper spindle with mechanical digital display. ATS/E system, automatic 2-axis positioning for spindles 3 and 4 Min. working height 12 mm Electric height adjustment of the upper spindles and the feed Central p...