Used Weinig Hydromat 23 for sale (465)

Condition: good (used), Year of construction: 2001, WEINIG MOULDER TYPE PROFIMAT 23 FORTEC 5 SPINDLES NO. 94151 YEAR 2001 WITH AUTOMATIC OUTFEED SYSTEM Weinig Year: 2001 Motor power: 33 kW Capacity (mm): 230 mm x 120 mm Working units: 5 1st unit: surface planer Tedpfx Abjxl Rv Roned 2nd unit: right spindle moulder 3rd unit: left spindle moulder 4th unit: thickness planer 5th unit: bottom horizontal spindle Infeed table length: 2000 mm Noise reduction lips: Yes Control panel with Siemens SIMATIC OP7 programmable 2-axis control Feed speed: variable speed drive from 5 to 24 m/min Electric rise and fall Digital counter on the control panel and digital mechanical counters at each axis movement Guard: Yes CE compliant: Yes Special features: - Pneumatically retractable infeed roller before the surface planer - Independent pneumatic feed pressure - Forward and reverse wood feed device - Independent spindle start-up, except the two spindle moulders, which operate together - 2-axis height and width programming - Device for all widths with automatic infeed side pusher coordinated with the left spindle moulder - Disengageable system for manual operation - Centralized lubrication system for tables with Waxilit groove - Profiling cover, 180 mm diameter, on right and left spindle moulders and bottom horizontal spindle - Short wood processing device - Extraction diameter: 5 x 140 mm

Condition: used, Weinig Unimat 23 Technical data Working width 30 - 230 mm working height 19 - 200 mm Tedpfx Absncc Igsnsd elevated on pedestal u- re-li-o-u.o without feeder only machine machine is dismantled, immediately available Transport can be organized

Condition: good (used), Year of construction: 1989, functionality: unexamined, working width: 220 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 220 mm, working height: 120 mm, overall weight: 7,500 kg, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, type of input current: three-phase, number of spindles: 10, power: 105 kW (142.76 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Hydromat 22 B With grooved bed 10 spindles, Working width: 220 mm, working height: 120 mm, spindle diameter: 50 mm, Feed rate: 7.5 kW / 8- 40 m/min, Spindle arrangement: 1-bottom (7.5 kW) - with hydraulic clamping 2- Right (7.5 kW) 3-Left (11 kW) 4-Right (7.5 kW)- with straight jointer 5-Left (7.5 kW) 6-Top (15 kW) - with hydraulic clamping Todeu Udd Sspfx Abnod 7-Bottom (7.5 kW) - with hydraulic clamping 8-Top (7.5 kW) - with hydraulic clamping and straight jointer 9-bottom (7.5 kW) - with hydraulic clamping and straight jointer 10-Uni (7.5) 6 driven rollers in the table

Condition: excellent (used), WEINIG HYDROMAT 22 AL Four-Sided Planer - Maximum workpiece width: 220 mm - Maximum workpiece height: 130 mm - 8 spindles: 1) Lower horizontal: 220 mm, 5.5 kW 2) Right vertical: 130 mm, 7.5 kW 3) Left vertical: 130 mm, 7.5 kW 4) Right vertical: 130 mm, 5.5 kW 5) Upper horizontal: 220 mm, 11 kW – 5th spindle with electric height adjustment (up/down) 6) Lower horizontal: 220 mm, 5.5 kW 7) Lower horizontal: 220 mm, 5.5 kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) Universal spindle: 220 mm, 360° adjustable, 7.5 kW - All spindles adjustable up/down, left/right - Spindle diameter: 40 mm - From above: - 6 dual toothed feed rollers + 1 single roller - 3 dual smooth rubber outfeed rollers + 3 single rollers Tsdpjw Ipicofx Abnod - Meter counter - From below: - Swiveling toothed steel infeed roller integrated in lower table - 3 smooth steel feed rollers - Feed via cardan drive rollers - Pneumatically-tensioned feed rollers - Stepless feed speed adjustment + 2-speed gearbox: 10–60 m/min - Feed motor: 10 kW - Electrically adjustable planing thickness - Lifting motor: 0.75 kW - Central table lubrication - Extraction port diameters: 5 x 140 mm, 3 x 120 mm - Machine dimensions (LxWxH): 4680 x 1780 x 1850 mm - Control cabinet dimensions (on pallet): 1020 x 1000 x 2230 mm - Approx. weight: 5,000 kg Feeder with centering device: - Roller width: 450 mm - 1 toothed powered infeed roller - 22 smooth powered rollers - Adjustable upper pressure - Feeder length: 9,020 mm - Stepless speed adjustment: 10–60 m/min - Motor: 0.75 kW - Dimensions (LxWxH): 9,020 x 790 x 1,150 mm Net price: 180,000 PLN Net price: 42,860 EUR (based on 4.2 EUR/PLN exchange rate) (Prices subject to change depending on exchange rate fluctuations)

Year of construction: 1999, condition: ready for operation (used), A four-side planer Weinig is available. Working width: 230mm, working height: 120mm, feed rate: 24m/min, machine dimensions X/Y/Z: approx. 3500mm/2000mm/2000mm, weight: approx. 3500kg. An on-site inspection is possible. Tsdpsxpw Uhsfx Abned

Condition: good (used), Year of construction: 1998, functionality: fully functional, spindle diameter: 40 mm, working width: 230 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 36 m/min, planing width: 20 mm, height adjustment type: electric, planing height: 160 mm, working height: 8 mm, Equipment: cabin, motor brake, Weinig Unimat 23 E 6 Head planer moulder. Bottom head - 10hp Fence + near head -15hp (common motor) 1st top head - 15hp 2nd top head - 15hp 2nd bottom head - 10hp Todev A Rpcepfx Abnsd Spindle speed - 6000rpm Feed speed - min/5 + max/36 meters per minute Working width - min 20mm + max 230mm Working height - min 8 mm + max 160mm Spindle diameter - 40mm The machine is currently still in use and viewing is more than welcome.

Condition: used, Year of construction: 1997, Beam planer 260 x 160 mm, rotating bevel unit on the upper spindle with two-axis control for the left and upper spindle max. working width: 260 mm max. working height: 160 mm Number of spindles: 6 pieces 1. Spindle: bottom spindle diameter 40 mm clamping length 270 mm speed 6000 rpm motor power 11.0 KW 2. Spindle: right spindle diameter 40 mm clamping length 170 mm speed 6000 rpm motor power 11.0 KW shared motor with left spindle 3. Spindle: left spindle diameter 40 mm clamping length 170 mm speed 6000 rpm 4. Spindle: top spindle diameter 40 mm clamping length 270 mm speed 6000 rpm motor power 11.0 KW Spindle: bottom Spindle diameter 40 mm Motor power 11.0 kW Speed 6000 rpm Clamping length 270 mm 6th spindle: top Chamfering unit Motor brakes: mechanical Up/down adjustment of the upper spindle: electric, selectable with/without feed Feed brake system: Yes Continuous feed speed up to: 3 - 23 m/min Feed roller pressure: pneumatic Feed power: 4.0 kW Feed drive: cardan Lubricant pump: manual Max. chip removal for joining: 10 mm Jointing bevel cutter on planer: Yes Driven rollers in the table: 1 Control type: PLC control Dimension display on spindle: mechanical numerical display Infeed rollers in front of planer: Yes Air cushion table: three-track Central lubrication point: Yes Description: short infeed table 1050 mm with interior light Storage location: Nattheim Todpewwwkhofx Abnsd

Condition: excellent (used), Year of construction: 1995, Planer - Moulder Manufacturer: Weinig Type: Profimat 23 Year of manufacture: 1995 Working width: 230 mm Working height: 120 mm Todpfsv Id Ngjx Abnod Planing table length: 2,000 mm Speeds: 6,000 rpm Spindle diameter: 40 mm Feed speed: 4 - 24 m/min Number of shafts: 6 Grooving saw: Yes Arrangement: U-R-L-R-O-U-grooving saw 1st shaft, bottom, 7.5 kW 2/3rd Shaft, right, left, 7.5 kW 4th shaft right, 7.5 kW 5th shaft top, 7.5 kW 6th shaft, bottom, 4.6 kW Groove saw: 2.2 kW Dimensions: approx. 4,500 - 2,000 - 1,800 mm Weight: approx. 3.5 tons

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, working width: 220 mm, planing height: 140 mm, spindle diameter: 50 mm, planing width: 220 mm, working height: 140 mm, power of feed motor: 15,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, type of input current: three-phase, number of spindles: 7, input frequency: 50 Hz, Weinig Hydromat 22 BL 7 spindles, Working width: 220 mm, working height: 140 mm, spindle diameter: 50 mm, feed: 15 kW / 6 - 60 m/min, Beesjj3Vck9 Spindle arrangement: 1-bottom (7.5 kW) with hydraulic clamping 2- Right (11 kW) 3-Left (11 kW) 4-Top (11 kW) 5-bottom (7.5 kW)-with hydraulic clamping, straight jointer and profile jointer 6-Top (11 kW) with hydraulic clamping, straight jointer 7-bottom (11 kW) - with hydraulic clamping, straight jointer and profile jointer 6 driven rollers in the table Todpfoulnr Ajx Abnjd

Condition: excellent (used), Catalogue number: 7715 TECHNICAL SPECIFICATIONS - Maximum workpiece width: 220 mm - Maximum workpiece height: 130 mm - 8 spindles: 1) Bottom horizontal 220 mm 5.5 kW 2) Right vertical 130 mm 7.5 kW 3) Left vertical 130 mm 7.5 kW 4) Right vertical 130 mm 5.5 kW 5) Top horizontal 220 mm 11 kW – 5th spindle electrically adjustable up/down 6) Bottom horizontal 220 mm 5.5 kW 7) Bottom horizontal 220 mm 5.5 kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) Universal 220 mm, 360° adjustable, 7.5 kW - All spindles adjustable vertically and laterally - Spindle diameter: 40 mm Feed system (top): Todpew Ipcvsfx Abnod - 6 double-toothed infeed rollers, driven, + 1 single roller - 3 double smooth rubber outfeed rollers, driven + 3 single rollers - Digital length counter Feed system (bottom): - Swivelling toothed steel infeed roller integrated into lower table - 3 smooth steel feed rollers - Feed drive via Cardan rollers - Pneumatic pressure rollers - Stepless feed speed adjustment + 2-speed gearbox: 10–60 m/min - Feed motor: 10 kW - Electric thickness adjustment - Body lifting motor: 0.75 kW - Centralised table lubrication - Extraction connection diameters: 5x140 mm, 3x120 mm - Machine dimensions (LxWxH): 4680x1780x1850 mm - Control cabinet dimensions (on pallet): 1020x1000x2230 mm - Weight: approx. 5000 kg ADVANTAGES - Equipped with 8 cutterheads - Universal spindle - Ideal for wet and dry timber - Made in Germany, WEINIG brand - Unpainted (original finish) - Very low operating hours - Used thickness planer, like new Net price: 165,900 PLN Net price: 39,500 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 1998, Very nice, low-hour Weinig U 23 with grooved bed. Technical specifications available on request. Tjdpfxoxpm Sis Abned

Condition: used, Year of construction: 2000, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 + 500 mm Feed motor 3 kW Feed speed 6-36 m/min. 1 WEINIG Unimat 23 E 4-side Planer and Moulder ----- 6 spindles (2 on the right), powerful motors, EM 11 feed magazine available Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle, bottom 7.5 kW ----- Diameter 40 mm Speed ??6000 rpm Tool travel radius 125 - 180 mm Folding device including tool Hardened table insert in front of 1st lower spindle 2nd spindle, right 11.0 kW ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??6000 rpm Tool travel radius 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axis adjustment range 80 mm 3rd spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??6000 rpm Tool cutting radius 112-200 mm Max. groove depth 35 mm Axis adjustment range 80 mm Pressure shoe in front of left spindle, including lateral roller pressure, spring-loaded 4th spindle, right 7.5 kW ----- Diameter 40 mm Speed ??6000 rpm Tool cutting radius 112-250 mm Max. tool diameter behind stop plane 203 mm Tedpjwqr Rvjfx Abnod Max. groove depth 35 mm Axis adjustment range 80 mm 5th spindle, top 11.0 kW ----- Diameter 40 mm Speed ??6000 rpm Tool cutting radius 112-200 mm Max. throat depth 35 mm Axis adjustment range 45 mm Split pressure shoe in front of the upper spindle, adjustable to the tool travel circle and pivoting away from the tool, spring-loaded. 6. Lower spindle 7.5 kW ----- Diameter 40 mm Speed ??6000 rpm Tool travel circle 112-250 mm Max. throat depth 15 mm Axis adjustment range 45 mm Spindles in general ----- All throat spindles with high concentricity. Lubrication points for the axial spindle movement. Spindle length of vertical spindles 170 mm Feed system ----- Motor with mechanical brake, 3 kW Mechanical feed continuously adjustable 6 - 36 m/min. Feed roller in front of the first lower tool pneumatically controlled up-down, Durofer pointed tooth rollers (Weinig patent) with depth gauge and self-cleaning Adjustment range of the feed rollers relative to the left spindle, axial: 35 mm Extension of the oscillating axis relative to the left spindles to 150 mm Machine electrical system ----- Operating voltage: 380-400-415 volts, 50 Hz. Machine stands, tables, and stops ----- Surface table 2.5 m long (including jointing ruler) Aluminum extension 0.5 m for surface table, including extension of the jointing ruler Manual Waxilit pump for resin removal from the table One driven rubber roller (spring-mounted in the outfeed table) Pressure elements and Guides ----- Pneumatic pressure rollers from above Pneumatic pressure rollers pivot away from above, opposite the right-hand spindles for easy tool changes Machine Operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Discharge after the upper spindle with mechanical digital display. ATS/E system, automatic 2-axis positioning for spindles 3 and 4 Min. working height 12 mm Electric height adjustment of the upper spindles and the feed Central p...

Condition: used, Weinig Profimat 23 planer and moulder for four-sided planing and profiling of wood with tools and an additional glazing bead saw for window production. spindles: 5 spindle 1: Below spindle 2: Right spindle 3: Left spindle 4: Upstairs spindle 5: Below Tedpfx Abjxc Hhwjned spindle 6: Glasleistensäge working width: 230 mm working height: 120 mm Total performance: 28 kW Rated current: 60 A

Year of construction: 1999, condition: ready for operation (used), Working width: 230mm, working height: 160mm, number of spindles: 5, spindle diameter: 50mm, spindle power: 4x 5.5kW/2x 11kW, feed rate: 24m/min, input table length: 3000mm, vertical spindle axial stroke: 80mm, horizontal spindle axial stroke: 45mm. Connected load: 126kW, air requirement: 8400-9600m³/h, machine dimensions X/Y/Z: approx. 3500mm/2000mm/1800mm, weight: approx. 3500kg. Including Weinig EM-11 slide-in unit and suitable distributor for the extraction system. Documentation available. On-site inspection is possible. Tedju Damdspfx Abnod

Condition: ready for operation (used), functionality: fully functional, working width: 260 mm, planing height: 170 mm, spindle diameter: 40 mm, planing width: 260 mm, working height: 170 mm, power of feed motor: 4,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, number of spindles: 5, input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Profimat 23 E Working width: 260 mm, working height: 170 mm, 5 spindles, spindle diameter: 40 mm, Spindle arrangement: 1- Bottom - 5.5 kW 2- Right + 3- Left - 11 kW Tsdpfx Aevgnb Robned 4- Top - 5.5 kW 5- Bottom - 11 kW Feed rate: 6 - 24 m/min - 4 kW Air cushion in the table One driven roller in the table at the exit. With tool.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Weinig Unimat 23 EL Four-Sided Planer (7 Heads) Year of Manufacture: 2005 Technical Condition: Very good Technical Specifications: - Working width: up to 230 mm - Working height: up to 140 mm - Number of spindles: 7 - Spindle arrangement: - Bottom horizontal - Right vertical - Left vertical - Top horizontal - Bottom horizontal - Top horizontal - Bottom horizontal - Spindle diameter: 40 mm - Spindle speed: 6,000 rpm - Feed speed: stepless adjustment, from 5 to 24 m/min - Infeed table length: 1,970 mm Spindle motor power: - Bottom horizontal: 5.5 kW - Right and left vertical: 7.5 kW - Top horizontal: 7.5 kW - Total installed power: 67 kW Tsdpsv Nvr Nofx Abned For an additional fee, installation, commissioning, and training on machine operation are available. We also offer ongoing maintenance services.

Condition: excellent (used), Weinig four-sided planer max planing width 230mm max planing height 120mm 5 heads, bottom-5,5KW; left and right-11KW, top-11KW, bottom-5,5KW feed - 4KW fully adjustable heads electrically adjustable up and down and planing width 40mm spindles Tedpfx Abjrigxysned feed on gimbal rollers, with smooth adjustment WEINIG brand solid planer, length of the machine 415cm machine checked in original condition

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-24 m/min. total power requirement 27 kw Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Weinig four-side planer Profimat 23 window version with glazing bead removal, ATS control and program control ----- Machine will be renovated and functionally checked! Technical data summary (please inquire about any additional accessories included) ----- Generally ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pieces. > Dressing table length: 2500 mm > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically clocked up-down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: Glass bead saw pneumatically up and down Spindle description ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: Glass bead saw 2.2 kW, 6000 rpm, 40 mm diameter Other features ----- > Glazing bead removal > ATS control, automatic 2-axis positioning for width and height (left and upper spindle) with program memory 99 programs > Machine operation: window package Joint control of the right spindle and the glazing bead removal via manual selector switch in the control panel Tedju Su Huepfx Abnjd > Spindles with mechanical digital display Option: used planer heads (technical data according to the manufacturer - no guarantee!)

Condition: excellent (used), Planer 9 heads Working width - 20 cm Working height - 22 cm Tsdpfxjtrdwtj Abned 5 pulleys in the table Heads 1 bottom 7.5 kW 2 right 11 kW 3 left 11 kW 4 right 11 kW 5 up to 11 kW 6 down 11 kW 7 up to 11 kW 8 down 11 kW 9 universal 11 kW PERFECT CONDITION!

Year of construction: 1990, condition: reconditioned (used), 4-sided planer unimat U23, 7 heads Tsdpfjpqxnxox Abnsd 4-sided Weinig 7-head planer, 7 universal arrangement: horizontal, lower vertical, right, left, vertical, right, vertical, upper horizontal, lower horizontal, and the last universal. The drive is realized by means of cardans. The drive is secured with Rotax clutches. Pressure of the element using pneumatics. Feed smoothly regulated by an inverter. Machine feed 0-42 m/min. 2.5 kW and 7.5 kW engines. Grinding table and a new one. Additionally, new wiring and new electrics. The machine has been completely renovated. Warranty .

Condition: good (used), Four side planer Weinig Unimat 23 Lamelling machine 9 spindles, grooved bed Working width: 230 mm, working height: 170 mm, spindle diameter: 40 mm, feed: 5,5 kW / 6 - 36 m/min, spindle arrangement: 1- Down ( 5,5 kW ) 2- Right ( 5,5 kW ) 3- Left ( 5,5 kW ) 4- Right ( 5,5 kW ) 5-Top (11 kW) 6-Bottom (5,5 kW) 7-Top (7,5 kW) 8-Bottom (37 kW) 9-Uni (11 kW) 5 driven rollers in the table Todpfspq T Rbjx Abned

Condition: used, Weinig H25 high-speed planer and moulder for four-sided planing and profiling of wet wood (Freshly sawn) The pictures show the current condition of the machine. Among other things, some original Weinig new parts were installed, and the tables/stops were sanded and recoated. Further new parts are required for completion. These will be ordered on a case-by-case basis, taking customer requirements into account. The control panel is for testing purposes and is temporary. working width: 250 mm working height: 160 mm Tedpjw R S T Aefx Abnsd spindles: 5 Spindles: 5 spindle 1: Bottom (7.5 kW) spindle 2: Right (11 kW) spindle 3: Left (11 kW) spindle 4: Top (15 kW) spindle 5: Below (tba) feed: 15 kW, hydraulic control: ATS system Driven table rollers: Yes Table tops: Sanded and recoated (hardened) Powered table rollers: Yes

Condition: good (used), Year of construction: 1985, WEINIG HYDROMAT 22B Weinig automatic infeed device Max working width : 220 x 140mm Spindle diameter : 50mm Infeed engine : 7,5 Kw Spindle configuration : 1. Under 7,5 Kw 2. Right 7,5 3. Left 7,5 4. Top 18,5 5. Under 30 6. Under 11 Tedpfx Aexbn T Ejbned 7. Top 11 Lots of heads/tools included

Condition: good (used), functionality: fully functional, working width: 255 mm, planing height: 160 mm, spindle diameter: 40 mm, planing width: 255 mm, working height: 160 mm, power of feed motor: 3,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, planer shaft diameter: 40 mm, type of input current: three-phase, number of spindles: 5, input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Unimat 23 E with 5 spindles, Working width: 255 mm, Tjdpfsxg Sa Hox Abnod Working height: 160 mm, Spindle diameter: 40 mm, Feed: 3 kW / 6 – 36 m/min, Spindle arrangement: 1-Bottom (5.5 kW) 2-Right (5.5 kW) 3-Left (7.5 kW) 4-Top (5.5 kW) 5-Bottom (4.0 kW) One driven roller at the outfeed table.

Condition: good (used), Year of construction: 1989, Serial No : 220-1198 Consist of : Weinig cross infeed, max lenght : 2200mm Weinig 22B 8 spindle moulder Max working width : 220 x 140mm Spindle diameter : 50mm Infeed engine : 7,5 Kw Spindle configuration : 1. Under11 Kw 2. Right 11 3. Left 11 4. Right 7,5 5. Left 7,5 6. Top 18,5 Todpfxsxbn Rqs Abnjd 7. Under 11 8. Top 11 Cross outfeed, max lenght : 2200mm Lots of heads/tools included