Used Weinig High Mech for sale (480)

Condition: used, Year of construction: 1981, Weinig U22N Number of spindles: 7 pcs Planing width: 220 mm Planing height: 120 mm Infeed table length: 2,500 mm Driven rollers in table: 2 pcs Rollers in table (not driven): 3 pcs Feed motor: 5.5 kW Counter bearing: spindles 6 and 7 Jointer: spindle 6 Spindle configuration Bottom 5.5 kW Right 3 kW Left 5.5 kW Right 7.5 kW Top 5.5 kW Top 4 kW Ndedpox Da Rbsfx Aa Eof Bottom 4 kW

Condition: excellent (used), Year of construction: 1996, working width: 230 mm, planing height: 120 mm, spindle diameter: 40 mm, planing width: 230 mm, working height: 120 mm, power of feed motor: 4,000 W, spindle speed (max.): 8,000 rpm, spindle speed (min.): 8,000 rpm, height adjustment type: electric, planer shaft diameter: 40 mm, type of input current: three-phase, number of spindles: 5, input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Unimat 23 with 5 spindles. Working width: 230 mm, Working height: 120 mm, Spindle diameter: 40 mm, Feed: 4 kW / 6 – 36 m/min, Njdpox Ndb Refx Aa Ejdf Spindle configuration: 1-Bottom 2-Right 3-Left 4-Top 5-Bottom Short-piece package Three powered rollers in the table. Note that the digital control system is defective – the machine operates only via manual adjustment. This means measurements are not displayed accurately and test pieces may be necessary. However, the defect is repairable.

Condition: good (used), Year of construction: 1994, functionality: fully functional, 1 used Weinig four-sided planer UNIMAT 23, 5-head with stacking unit for board lengths up to 5.50 m Planing width: 230 mm Nodpfxsx Ngiqe Aa Ejdf Planing height: 150 mm Spindle diameter: 50 mm Spindle arrangement: bottom, right, left, top, bottom (with jointer) Total connected load: 37 kW Outfeed roller conveyor: 6000 mm long, 800 mm wide with transfer to left and right Left: transfer to stacking machine Right: board turner Stacking unit Lux for board lengths up to 5.50 m, width up to 1.30 m

Condition: used, Year of construction: 1997, Beam planer 260 x 160 mm, trailing chamfering unit on upper spindle, air cushion table with dual-axis control for left and upper spindle, brand new control system (latest Weinig version) Max. working width: 260 mm Max. working height: 160 mm Number of spindles: 6 units 1st spindle: bottom, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 2nd spindle: right, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm, motor power 11.0 kW (shared motor with left spindle) 3rd spindle: left, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm Ndjdowwwkhspfx Aa Eof 4th spindle: top, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 5th spindle: bottom, spindle diameter 40 mm, motor power 11.0 kW, speed 6000 rpm, clamping length 270 mm 6th spindle: top, chamfering unit Motor brakes: mechanical Electric height adjustment for upper spindle Optional with/without feed system Feed brake system: Yes Feed speed stepless up to: 3 - 23 m/min Feed roller pressure: pneumatic Feed power: 4.0 kW Feed drive: cardan Lubricant pump: manual Max. jointing allowance: 10 mm Jointing rebate cutter on jointer: Yes Powered rollers in table: 1 unit Control system: PLC control Spindle readout: mechanical digital display Infeed rollers before jointer: Yes Air cushion table: three-strip Central lubrication point: Yes Description: short infeed table 1050 mm with internal lighting Location: Nattheim

Condition: good (used), Year of construction: 1997, LAMEL MOULDER WEINIG HYDROMAT 22 BL Maximum working width : 220 x 140 mm Spindle diameter : 50 mm Infeed : 30 Kw ( Separate Hydraulic station ) Seperate electric cabinet : L 2200 x W 600 x H 2000 mm 1. spindle : 5,5 Kw 2. 5,5 Kw 3. 7,5 Kw 4. 7,5 Kw 5. 7,5 Kw 6. 11 Kw 7. 15 Kw Ndodpsxa Hlkjfx Aa Eof 8. 37 Kw 9. 7,5 Kw 10. 7,5 Kw Steel cage with gas pistons over machine. External pump for central lubrication( For 200 L lubrication oil barral ) 5 Europallets with spareparts/tools/extra spindles included

Condition: as good as new (ex-display), Year of construction: 2024, Automatische langssnijzaag Raimann FlexiRip “Jrionline” Ndsdpfx Aasu Sg Ans Eef Zaag lengte : 6200 mm Maximale zaaghoogte afhankelijk van de diameter van het zaagblad, variërend van 85 tot 210 mm. Alleen gebruikt als demo, praktisch als nieuw, met slechts 34 draaiuren.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 92552, working width: 230 mm, planing height: 120 mm, working height: 120 mm, spindle diameter: 40 mm, power of feed motor: 1,500 W, 🪚 2001 Weinig Quattromat 23P Planer Moulder – Industrial Performance in Very Good Condition Now available for sale: a 2001 Weinig Quattromat 23P, one of the industry’s most reliable and compact 4-sided planing and moulding machines, ideal for workshops producing mouldings, profiles, cladding, architraves, and more. This unit is in very good condition, fully operational, and perfect for businesses looking to increase productivity with a trusted European-built planer moulder. ✅ Key Features – Weinig Quattromat 23P Year of Manufacture: 2001 Condition: Very Good – well-maintained, and ready to run Nodpfx Aswnr Enja Ejdf Working Width: 13 to 230 mm Working Height: 6 to 120 mm Number of Spindles: 4 Spindle Diameter: 40 mm Spindle Speed: 6,000 rpm Feed Speed: Variable up to 20 m/min Power: Approx. 21 kW combined spindle power Infeed Table: 1,800 mm Pneumatic Pressure System: For consistent timber hold-down Digital Readouts: For quick and accurate spindle positioning Straightening spindle motor: 4 - 7.5 KW (5.5 - 10 HP) Vertical spindles motor: 5.5 - 11 KW (7.5 - 15 HP) Top spindle motor: 4 - 11 KW (5.5 - 15 HP) Feed motor: 1.5 KW (2 HP) Spindle speed: 6,000 rpm Spindle diameter: 40 mm Tool cutting circles of moulding spindles: 125 - 200 mm Adjustment range of spindles (axial): 30 mm Adjustment range of straightening spindle: 5 mm Feed speed: 8 m/min. Feed roller diameter: 140 mm Feed roller width: 2 x 50 mm Width of roller in the outfeed table: 50 mm Adjustment range of straightening table and edge-jointing fence: 10 mm Height of right fences: 60 mm Length of straightening table: 2 m Reference engraver with cutter: Yes Pneumatic pressure for feed rollers: Yes Pneumatic adjustment of infeed roller in front of 1st bottom spindle: Yes Pressure roller from above and left in front of machine infeed: Yes 🛠️ Machine Capabilities 4-sided planing for smooth and dimensionally accurate timber Profile moulding (e.g. tongue & groove, chamfering, rebating, etc.) Batch production of window, door, or cladding components Compact footprint – ideal for smaller workshops or mobile production lines Easy spindle access and minimal setup time 📦 Included with Machine Weinig Quattromat 23P base unit Dust extraction ports Original manuals and operator instructions Fully tested, serviced, and ready for production 🪵 Perfect For: Joinery workshops Timber frame manufacturers Furniture makers Shed and fencing producers Custom millwork and architectural moulding shops 📍 Availability & Delivery The machine is in stock now and available for immediate inspection and dispatch. We offer delivery across Ireland, UK and Europe. 📞 Contact Us Today Boost your timber processing capabilities with this robust and accurate Weinig Quattromat 23P. Weinig Quattromat 23P for sale Used Weinig planer moulder in very good condition 4-side planer moulder woodworking machine Industrial wood planer for moulding production Compact planer moulder for small workshops Weinig planing and profiling machine UK / Ireland / Europe Second-hand Weinig machinery for woodworking

Condition: excellent (used), working width: 250 mm, planing height: 140 mm, spindle diameter: 50 mm, planing width: 250 mm, working height: 140 mm, power of feed motor: 30,000 W, spindle speed (max.): 6,000 rpm, height adjustment type: hydraulic, type of input current: three-phase, number of spindles: 9, input frequency: 50 Hz, Weinig Hydromat 25 9 spindles, Working width: 250 mm, working height: 140 mm, spindle diameter: 50 mm, feed: 30 kW / 6 - 100 m/min, Spindle arrangement: 1-bottom (11 kW) - with hydraulic clamping 2-Right (9 kW) 3-left (11 kW) Njdsq Au Tlspfx Aa Esdf 4-Right (9 kW) 5-Top (15 kW)- with hydraulic clamping 6-Bottom (7.5 kW) - with hydraulic clamping 7-Top (7.5 kW) - with hydraulic clamping and straight jointer 8-Top (11 kW) - with hydraulic clamping and straight jointer 9-bottom (11 kW) - with hydraulic clamping and straight jointer 11 driven rollers in the table

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 5-24 m/min. 1 WEINIG Unimat 23 E Planer and moulder ----- 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ----- Diameter 40 mm Speed ??6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 3. Spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-200 mm Max. groove depth 35 mm Axially travel 80 mm Pressure shoe in front of left spindle, including spring-loaded lateral roller pressure 4. Spindle, right 8.3 kW (motor replaced) ----- Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 5. Spindle, top 7.5 kW ----- Diameter 40 mm Speed ??8,000 rpm Tool travel 112-200 mm Max. groove depth 35 mm Axially travel 45 mm Split pressure shoe in front of upper spindle, adjustable to the tool travel and pivoting away from the tool, spring-loaded. 6. Lower spindle 4.0 kW ----- Diameter 40 mm Speed ??6,000 rpm Tool travel 112-250 mm Max. groove depth 15 mm Axially travel 45 mm Spindles in general ----- All groove spindles with high concentricity. Lubrication points for the axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5-24 m/min. Feed roller in front of the first lower tool pneumatically controlled up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm Machine electrical system ----- Operating voltage 440 V (voltage range 380 - 420 V), 50 Hz. Machine frame, tables and stops ----- Infeed table 2.0 m long (incl. jointing guide) Manual Waxilit pump for table de-resin removal One driven rubber roller (spring-loaded in the outfeed table) Two driven rollers in the machine table, hardened Machine operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Extraction after the upper spindle with mechanical digital display. ATS/System, automatic 2-axis positioning for spindles 3 and 5 Minimum working height 12 mm Electric height adjustment of the upper spindles and the feed Central lubrication points on the front of the machine Electronic digital displays on spindles 3 and 5 (axial), spindle 6 (radial) and spindle 4 (axial and radial) Safety and noise reduction Ndsdpfx Aaoxz Hh Ue Ejf ----- Full safety enclosure Easily hinged safety hood with window. Covers the e...

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, Planing size 220 x 150 mm, grooved bed, electric height and width adjustment Machine in operation, works. CHF 14500.— excl. VAT Nedou Sntzopfx Aa Eodf From site 4102 Frenkendorf Switzerland

Condition: used, Year of construction: 2001, with air cushion table, chamfering unit Max. working width: 260 mm Max. working height: 160 mm Number of spindles: 6 pcs 1st spindle: bottom Spindle diameter: 40 mm Clamping length: 270 mm Speed: 6000 rpm Motor power: 11.0 kW 2nd spindle: right Spindle diameter: 40 mm Clamping length: 170 mm Speed: 6000 rpm Motor power: 11.0 kW 3rd spindle: left Spindle diameter: 40 mm Clamping length: 170 mm Speed: 6000 rpm Shared motor with right spindle With ATS/M system (automatic positioning control) 4th spindle: top Spindle diameter: 40 mm Clamping length: 270 mm Speed: 6000 rpm Motor power: 11.0 kW With ATS/M system (automatic positioning control) 5th spindle: top, beveling unit 6th spindle: bottom Spindle diameter: 40 mm Ndodpfx Aasxr A Npe Ejf Clamping length: 270 mm Speed: 6000 rpm Motor power: 11.0 kW Motor brakes: mechanical Electric hood locking: Yes Height adjustment of top spindle: electric, with feed Feed brake system: Yes Feed speed stepless up to: 3 - 26 m/min Feed roller pressure: pneumatic Feed drive power: 4.0 kW Feed drive: Cardan shaft Lubricating pump: automatic Max. cutting depth (joining): 10 mm Jointing cutter on planer: Yes Powered rollers in table: 1 pc Control type: PLC (programmable logic controller) Spindle position indicator: digital display Infeed rollers before planer: Yes Air cushion table: double track Central lubrication point: Yes Description: Joiner table with jointing fence 1.0 m, pneumatic pressure Infeed roller before planer Powered rollers in table Total connected load: 52 kW Location: Nattheim

Condition: good (used), Year of construction: 1999, machine/vehicle number: 89257, GreCon Dimter Opticut 704 L saw from 1999. Ndodpfx Aastvahls Ejf Machine dismantled from a functioning production line. No output ejectors; the machine requires reintegration or retrofitting. Available for inspection at our premises.

Condition: excellent (used), Catalogue number 7784 TECHNICAL DATA - Spindle diameter: 30 mm - Working height of spindle: 150 mm - Interchangeable spindle - Spindle locking - Adjustable up/down + angle - Original cast iron fence with full adjustment Ndsdpfx Aoxt I Adsa Eof - 4 spindle speeds + left/right: 3000/5000/6000/10000 rpm - Table dimensions: 1120x800 mm - Motor: 3.7 kW - Dimensions (L/W/H): 1100x1400x1160 mm - Weight: 775 kg ADVANTAGES – German-made – Used milling machine – Very good condition Net price: 6,900 PLN Net price: 1,640 EUR Net price calculated at a rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: good (used), functionality: fully functional, working width: 255 mm, planing height: 160 mm, spindle diameter: 40 mm, planing width: 255 mm, working height: 160 mm, power of feed motor: 3,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, planer shaft diameter: 40 mm, type of input current: three-phase, number of spindles: 5, input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Unimat 23 E with 5 spindles, Working width: 255 mm, Ndsdpfxjxg Sa Hs Aa Eef Working height: 160 mm, Spindle diameter: 40 mm, Feed: 3 kW / 6 – 36 m/min, Spindle arrangement: 1-Bottom (5.5 kW) 2-Right (5.5 kW) 3-Left (7.5 kW) 4-Top (5.5 kW) 5-Bottom (4.0 kW) One driven roller at the outfeed table.

Condition: excellent (used), Multirip saw Max. Cutting width 310 mm Chain width 340 mm Max. Passage width / input width 650 mm Max. Cutting height with Quickfix clamping flange 110 mm Saw shaft diameter 65 mm Min. timber length 500 mm Max. Feed speed 35 m/min, variable Motor power 22.0 kW, 400 V, 50 Hz Feed motor 1.3 kW, 400 V, 50 Hz Saw blade diameter min./max. 300/ 350 mm Working height 850 mm Extraction diameter 250 mm Required extraction volume 5300 m3/h Quickfix saw blade attachment Electric height adjustment of the saw shaft Electric height adjustment of the pressure unit Dimensions approx. L x W x H = 1750 x 1750 x 1500 mm Weight 1850 kg Incl options: Oil level monitoring SafetyPlus Quickfix Note for used machines: Njdpetwy Iuofx Aa Esdf - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: good (used), Year of construction: 2006, WEINIG MOULDER MACHINE MOD. UNIMAT 500 Nodjq Ru Dyspfx Aa Ejdf YEAR 2006 - EC STANDARD PRICE ON REQUEST

Condition: excellent (used), CATALOG NUMBER 6674 TECHNICAL SPECIFICATIONS - Max planing width: 150 mm - Max planing height: 130 mm 7 spindles: 1) bottom horizontal, 150 mm, 3 kW 2) right vertical, 130 mm, 3 kW 3) left vertical, 130 mm, 4 kW 4) top horizontal, 150 mm, 4 kW Ndjdpjiba Evefx Aa Ejf 5) bottom horizontal, 150 mm, 3 kW 6) right vertical, 130 mm, 4 kW - Spindle diameter: 35 mm (all spindles) - All spindles adjustable up/down and right/left - 4 driven toothed feed rollers from above - 4 top rubber outfeed feed rollers - 2 top pressure rollers - Electric planing thickness adjustment: 0.25 kW - Infeed table length: 1970 mm - Central table lubrication - Stepless feed speed adjustment - Feed motor: 1.5 kW - Extraction port diameters: 6x120 mm - Dimensions (LxWxH): 4000x1300x1600 mm - Weight: approx. 3000 kg – German manufacture – 6-head machine – Used moulder/planer in very good condition Net price: 36,900 PLN Net price: 8,790 EUR Net price based on 4.2 PLN/EUR exchange rate (Significant currency fluctuations may cause price adjustments)

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, working width: 220 mm, planing height: 140 mm, spindle diameter: 50 mm, planing width: 220 mm, working height: 140 mm, power of feed motor: 15,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, type of input current: three-phase, number of spindles: 7, input frequency: 50 Hz, Weinig Hydromat 22 BL 7 spindles, Working width: 220 mm, working height: 140 mm, spindle diameter: 50 mm, feed: 15 kW / 6 - 60 m/min, Beesjj3Vck9 Spindle arrangement: 1-bottom (7.5 kW) with hydraulic clamping 2- Right (11 kW) 3-Left (11 kW) 4-Top (11 kW) Nsdpfx Aajulnr Ao Esdf 5-bottom (7.5 kW)-with hydraulic clamping, straight jointer and profile jointer 6-Top (11 kW) with hydraulic clamping, straight jointer 7-bottom (11 kW) - with hydraulic clamping, straight jointer and profile jointer 6 driven rollers in the table

Condition: excellent (used), Tenoning and Slotting Machine WEINIG Type 51 Pivoting studio window device with digital angle display Rolling table with automatic feed rate of 6 m/min. Rolling table length approx. 2,100 mm Pneumatic workpiece clamping Automatic countershaft change Crosscut saw Pneumatically timed 4-station turret Motor approx. 3 kW / 380/400 V / 50 Hz Saw blade diameter = 350 mm Saw blade speed 2,800 rpm Slotting spindle Diameter D = 50 mm Clamping length 320 mm Spindle motor approx. 11 kW / 380/400 V / 50 Hz Spindle speed 3,000 rpm Tool diameter max. 320 mm Length stop system Machine including operating tools Installation dimensions L x W approx. = 2700 x 2800 mm Weight approx. 2000 kg Ndjdpfxjv Tb Hge Aa Ejf Note on used machines: • Errors in technical specifications and prior sale excepted. • Prices quoted are for pickup from the location - free shipping! • The machines have been cleaned and function-tested. • All machines are sold as seen without any warranty claims. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only respond to inquiries if you provide your address and telephone number!)

Condition: used, Cabin for Weinig Unimat 300 Ndjdpfxjxga E Ds Aa Ejf

Condition: used, functionality: fully functional, working width: 240 mm, shaft diameter: 38 mm, Spindle from Weinig Powermat 400. Price per piece Ndjdpfxju D Nihe Aa Eof

Condition: used, Year of construction: 1979, functionality: fully functional, working width: 250 mm, planing height: 160 mm, spindle diameter: 50 mm, planing width: 250 mm, working height: 160 mm, overall weight: 10,000 kg, power of feed motor: 30,000 W, spindle speed (max.): 6,000 rpm, height adjustment type: mechanical, planer shaft diameter: 50 mm, type of input current: three-phase, table length: 1,000 mm, number of spindles: 9, input frequency: 50 Hz, Weinig Hydromat 25 Ndedoqvml Rjpfx Aa Esf 9 spindles, Working width: 250 mm, working height: 140 mm, spindle diameter: 50 mm, feed: 30 kW / 6 - 65 m/min, Spindle arrangement: 1-bottom (11 kW) - with hydraulic clamping 2- Right (7.5 kW) 3-left (11 kW) Jytnaq 4-Left (7.5 kW) 5-Right (7.5 kW) 6-Top (7.5 kW) - with hydraulic clamping 7-Top (15 kW) - with hydraulic clamping and straight jointer 8-Bottom (11 kW) - with hydraulic clamping and straight jointer 9-bottom (11 kW) - with hydraulic clamping and straight jointer 8 driven rollers in the table

Condition: good (used), functionality: fully functional, working width: 230 mm, planing height: 170 mm, spindle diameter: 40 mm, planing width: 230 mm, working height: 170 mm, power of feed motor: 5,500 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, planer shaft diameter: 40 mm, type of input current: three-phase, number of spindles: 9, power: 95 kW (129.16 HP), input frequency: 50 Hz, Equipment: cabin, Four-sided planer Weinig Unimat 23, lamella machine 9 spindles, Nedpfxox Hkp Ne Aa Eodf grooved bed Working width: 230 mm, working height: 170 mm, spindle diameter: 40 mm, feed: 5.5 kW / 6–36 m/min, Spindle arrangement: 1-Bottom (5.5 kW) 2-Right (5.5 kW) 3-Left (5.5 kW) 4-Right (5.5 kW) 5-Top (11 kW) 6-Bottom (5.5 kW) 7-Top (7.5 kW) 8-Bottom (37 kW) 9-Uni (11 kW) 5 driven rollers in the table

Condition: good (used), Slotting bed for four-sided planer WEINIG Unimat 23 with 6 spindles. Used condition Nodpjunbuvofx Aa Esdf

Condition: used, Adjustment status for Weinig Powerlock Njdpfx Aexga Ewja Eodf