Used Wax And Hot Melt for sale (20,059)

Condition: used, machine/vehicle number: YV2AP90DXBA71xxxx, mileage: 630,000 km, Year of construction: 2011, Please contact ATS Norway for more information Please provide reference number upon request: 22082 Specifications: Model year: 2011 Mileage: approximately 630,000 km EU approved until 20.05.2026 Euro 5 Wheelbase: 490/136 cm 700 hp Retarder Air suspension Tandem Diesel heater Onspot Tires (see pictures) Galvanized aluminum body Clutch replaced Gearbox serviced and circuit board replaced Compressor horn Roof lights Tool box Automatic transmission AC/Climate control 2x beds Radio Delivery by agreement Description: 2011 Volvo FH16 with 700 horsepower. It has onspot functionality. Delivery by agreement. Km: 630000 HK: 700 Technical approved: Yes EU-approved until: 20.05.2026 Own weight: 11400 Total Weight: 29500 Payload: 18025 Width: 255 Length: 937 Kw: 515 Euro: 5 Model: FH16 700 Nedpfsx Izqtox Aa Eolk Gearbox: Automatic

Condition: used, Year of construction: 2005, operating hours: 3,600 h, 2005 | JCB 535-140 with forks and loading bucket | Used Telescopic Forklift | 3600 hours 📍Location: France, Joué-lès-Tours 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 40600 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert Nsdox El Rrspfx Aa Eolk 59 inspection points 59 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The unit functioned during inspection recommended full service and filters 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40116 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), Year of construction: 2017, REF: MM5724 Complete automatic volumetric filling and bagging system with PLC control panel, suitable for packing many dried snack-type products such as nuts, seeds, grains, dried fruit, etc, into pillow-packs. The product moves from the opper via a vibrating tray / chute into a turning bowl with cup openings. The amount per cup is then dropped into the funnel through the forming tube into the bag. The size of the cups determines the filling amount. The turning bowl is adjustable in height so even with the same size cup there are various filling sizes possible.  Model - MWM-900 Automatic Form Fill Seal Machine.  Sealing jaws: Horizontal - 260mm. Vertical - 300mm.  Pack size range - Length: 50mm - 320mm. Width: 140mm (with current forming tube/shoulder).  Nsdot Sw Elspfx Aa Eolk Speed - up to 30 packs/minute, depending on product size.  Filler - volumetric, 20g-1000g range. Can double drop for larger pack sizes.  Electric supply - 440 V / 50 hz / 3 phase. Features a metal detector at the bottom of the filling tube / inside the forming assembly and has hot foil stamping for printing on pouch. Previously used for packing popcorn. 

Condition: used, axle configuration: 2 axles, first registration: 02/2009, total length: 10,540 mm, total width: 2,550 mm, total height: 3,920 mm, suspension: air, tire size: 265/70R19,5, color: other, Year of construction: 2009, Equipment: ABS, tail-lift, = Additional Options and Accessories = - EBS - Tail lift = Notes = Number of axles: 2, twin tires, unladen weight: 3,890 kg, gross weight: 18,000 kg, chassis type: complete chassis, suspension type: full air suspension, ABS, EBS, steering: 1x20, axle type: BPW, tail lift, tail lift type: rear flap, tail lift capacity: 2,500 kg, tail lift manufacturer: Zepro, tail lift material: steel, tail lift dimensions: ? = Further Information = General Information Cab: day cab Registration number: KLEYN1 Driveline Fuel type: diesel Transmission Transmission: manual Axle Configuration Tire size: 265/70R19.5 Brakes: drum brakes Suspension: air suspension Axle 1: twin tires; left inner tire tread: 12 mm; left outer: 12 mm; right inner: 8 mm; right outer: 7 mm Axle 2: twin tires; left inner: 8 mm; left outer: 8 mm; right inner: 7 mm; right outer: 6 mm Weights Unladen weight: 3,890 kg Payload: 14,110 kg GVW: 18,000 kg Operational Tail lift: Zepro, rear flap, 2,500 kg Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Optical condition: average Damages: none = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands, model years, and price classes. Why buy at Kleyn Trucks? Simple! • Large, fast-rotating stock • Recognizable quality • Good prices • Reliable business conduct • We speak many languages • We understand our customers • Support with import and transport • (Export)number plates are quickly arranged • Professional technical services • The security of 'recognized quality' • And more.... Please visit our website for special offers and our full inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send a request through our website. Nedpfx Ajxz N Tgja Eelk Ask directly about our European warranty package.

Condition: used, Etikettierleistung: ca. 3.000 Fl./Std. Formate: 0,75 l verschiedener Größe ausgestattet mit 2 (zwei) Selbstklebe-Etikettieraggregaten zur Applikation - einesVorderetikettes - eines Rückenetikettes auf zylindrische oder geformte Glasflasche 2 (zwei) Nassleim-Etikettieraggregaten zur Applikation - eines Vorderetikettes - eines Rückenetikettes - einer Halsschleife auf zylindrische Glasflasche Etikettenlänge 10-195 mm Etikettenhöhe 10-180 mm Behälterdurcinnesser: 40- 130 mm Behälterhöhe: 140-380 mm Maximale Produktionsleistung: 3.500 Flaschen / Stunde Installierte Leistung: 4 kW - komplett mit Rahmen und Türen aus Edelstahl AISI304 - automatische Geschwindigkeitsregulierung - Kopfliöhenverstellung über Touch Screen Display - Optische Orientierung anhand einer Markierung auf der Kapsel durch Sensoren auf jedem Teller und Tellerrotation mittels Schrittmotoren - Vier (4) Schnellwechselteller - Zwei (2) Etikettiereinlieiten für Selbstklebeetiketten Mod. MAK-AN mit 50 m/min auf beweglichen Stationen am Rahmen der Etikettiermaschine montiert - Zwei (2) Etikettieraggregate auf 4 Achsen, einstellbar mittels Handrad und digitaler Positionsanzeige - Elektrischer Schaltsclnank, wasserundurchlässig, aus Edelstahl AISI 304 - Maschinensteuerung mittels SPS und Touch-Screen-Display Technical Details : working direction : rotative, clockwise, left-right capacity bph max. : 5200 labels : self adhesive labels, cold glue paper labels number of labelling stations : 4 number of bottle plates : 4 orientation : optical orientation using a photocell, bottle plate with stepper motor Nsdpexyt D Tefx Aa Eelk motor height adjustment : yes speed adjusment : frequence converter

Year of construction: 2015, operating hours: 61,469 h, condition: ready for operation (used), Control Unit Nljdpfxsx Imqlj Aa Eek Brand TRUMPF Model TASC 6000 This TRUBEND Cell 5000 with TruBend 5085 extended version (2720 mm x 850 kN) and BendMaster 60 was manufactured in 2015. World's first bending automation with image recognition for maximum flexibility. Sheet metal parts up to 40 kg, 6-axis backgauge sensor technology. Maximum repeat accuracy thanks to angle sensor technology (ACB) in automated operation. It features a stable all-steel frame, electro-hydraulic top drive, and a modern block hydraulic system. The control unit is a TRUMPF TASC 6000 with a 15-inch touchscreen and network capabilities. Ideal for precise bending operations, consider the opportunity to buy this TRUMPF TruBend Cell 500 press brake. Contact us for more information about this machine. Application Types Bending

Condition: used, Year of construction: 2014, operating hours: 11,000 h, Serial number: KMTPC240J55K6xxxx Please contact ATS Norway for more information Please provide reference number upon request: 17924 Specifications: 2014 model Hours: Approximately 11,000 Weight: 25,500 kg Power: 141 kW Chassis (see pictures) Gjerstad S70 attachment Engcon tiltrotator SMP sanding bucket Central grease Belt width: Approx. 60 cm Width of the machine: Approx. 320 cm Cracks in the windshield (see photos) Rear view camera Extra light Nlodpfx Aajvg Nr De Ejk Rotor lamp Radio/CD Air conditioning/AC Previously under service agreement Description:Komatsu PC240, 2014 model, sold with Engcon rototilt and SMP sanding bucket.The machine has a service agreement and has been regularly serviced throughout its life. The turbo has recently been replaced. The GPS unit is not included.Last service was performed at 10,500 hours.Delivery can be done quickly. Hours: 11000 Own weight: 25500 Total Weight: 25500 Width: 320 Kw: 141 Model: PC240LC-10

Condition: used, Year of construction: 2011, operating hours: 9,077 h, 2011 | Case WX95 with 4 excavator buckets and forks | Used Wheeled Excavator | 9077 hours 📍Location: France, La Chapelle-du-Châtelard 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 24800 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 59 inspection points 46 approved ✅ 12 imperfect ℹ️ 0 issues ⚠️ Nedjx Dy Dzepfx Aa Ejlk 📌 Inspector's Comment: Good hydraulic and mechanical working condition. Few hydraulic leaks. 4-wheel drive and steering. See details below. Coupler to be manually relocked due to failure of the hydraulic latch (the solenoid of the 3-way valve seems to be out of order). 3 buckets, 1 drop, and 1 fork carriage. Full maintenance required. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39978 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, mileage: 1,234,569 km, color: orange, first registration: 05/2005, Year of construction: 2005, Equipment: crane, Sand grabs and pallet hooks. Grab 3 = 59 x 1.27 - Grab 4 = 72 x 121 - Grab 5 = 65 x 1.28 Grab 8 = 80 x 1.75 - Grab 10 = 61 x 1.63 with rotator 1 = Pallet hook 2 = Grab 90 x 1.40 6 = Stone clamp, small 9 = Pallet hook 11 = Stone clamp 12 = Forklift forks 14 = Sand grab 49 x 97 with teeth 15 = Pallet hook 16 = Pallet hook 17 = Pallet hook 18 = Sand grab, small 20 = Stone clamp = Further information = Nlodpowwtmxjfx Aa Eok Suitable for: Construction machinery Crane: Palfinger / Atlas grabs, year of manufacture 2005, mounted behind the cab

Condition: good (used), Tom Chandley BOMK4MTU3 Oven and proofer Njdpfx Aev T Acpea Eolk Serial: 10837 Stainless, 15.5Kw, Three deck oven with proofer, adjustable temp and timer controls, chamber size 900mm x 700mm x 180mm, stone based, mobile, 3Ph

Condition: used, This listing is for a MMM Stericell Hot Air Sterilizer. Good working and cosmetic condition. Njdpfjxzg N Eox Aa Eelk The STERICELL® hot air sterilizer is intended for use in healthcare for the hot air / dry heat sterilization process of non-packaged and packaged medical devices, including invasive devices designed by their manufacturers for hot air / dry heat sterilization.

Condition: repair required (used), Year of construction: 2014, functionality: limited functionality, 1 x ActionPac Scales & Automation single-head linear weigher with drop-through metal detector. Supplied with pneumatic foot-pedal for manual depositing. *PLEASE NOTE - THE LINEAR WEIGHER REQUIRES NEW CONTROL PANEL SCREEN* Njdoxv A Itepfx Aa Ejlk Syntron Magnetic Feeder - F-T01-A. Linear weigher: Model - ME109CM. Serial number - 4284. Date of manufacture - 2014. Weighing range - 28g to 2268g (typically). Feeding pan - smooth, for solid and small granular products. Electrical requirements - 1 phase. Metal detector: Model - IMD-I gravity drop-through. Aperture - 180mm diameter. Electrical requirements - 1 phase. Overall dimensions - 1420mm long x 975mm wide x 3200mm high. Previously used to weigh and pack coffee beans and granules. Cost of new control panel - $2,700 (quoted by manufacturer).

Condition: used, mileage: 117,898 km, Year of construction: 1978, Serial number: 100xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21424 Specifications: 1978 model 117,898 km Rep. Object 205 hp 6x2 Manual transmission Tires (see pictures) Rust of the rear housing (see pictures) Frame sand blue and varnished a few years ago Battery needs to be replaced. Tipping box Foldable aluminum limbs Internal length in plan: 6,115 m Internal width in plan: 2,475 m Light Nlsdpfxsxgcrgs Aa Eek Heater Ready for delivery   Crane specifications: 1979 model 10 t/m crane 2 Hydraulic outriggers 2 Hydraulic extensions 1 Hydraulic extension on main boom 1 Manual Manually controlled Ready for delivery   Description: We have a 1978 Scania LB 81 6x2 Crane truck w/ 10t/m crane and tipper ekt for sale. The car is being sold as a repair item as it is no longer EU approved and there are errors and defects. There is a bad battery on the car, these should be replaced. Starter is starting to get bad. Errors and deficiencies exist and some cost must be taken into account to get it back in good condition. Ready for delivery Km: 117898 HK: 205 Technical approved: no EU-approved until: 28.02.2019 Own weight: 10100 Model: LB 81 6x2 Kranbil m/ 10t/m kran og tipp ekt Gearbox: Manual

Condition: used, Year of construction: 2015, 2015 | MAN TGX 18.480 4x2 BLS WITH TIPPER HYDRAULIC AND GOOD TIRES | Used Tractor Unit | 396459 kms 📍Location: Germany, Heusweiler 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 19900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 28 inspection points 28 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The MAN truck was in good condition at the time of the inspection, however, most of the tires need to be replaced. The rear left mudguard is torn off. Unfortunately, the trailer could not be detached, which limited the inspection of the truck. Tilting the driver's cabin was not possible due to the lack of tools, so an inspection of the engine could not be performed. The truck is equipped with a double-acting hydraulic system with two lines and an additional pump designed for a Walking Floor. The total height with the cabin spoiler mounted is 3.9 m. Nsdpfxex H A Iqo Aa Eelk 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "31325 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, mileage: 33,976 km, power: 100 kW (135.96 HP), first registration: 05/1990, fuel type: diesel, overall weight: 7,500 kg, axle configuration: 2 axles, next inspection (TÜV): 05/2020, color: red, gearing type: mechanical, Year of construction: 1990, Equipment: air conditioning, all wheel drive, compressor, Unimog U 1400 two-way equipment Nsdoi R Aicspfx Aa Eelk Manufacturer : Two-way converter Wagon brake system 600 tons Coupling rod support rear

Condition: excellent (used), This system If designed to continuously cool veg products in glycol chilled water what was bought new by our customer to chill sachets of hot sauces and soups at 2500 KG per hour. Available separately or as a line with infeed and outfeed conveyors. Nlsdpfjh Uyg Nex Aa Esk

Condition: used, Year of construction: 2018, operating hours: 4,700 h, Please contact ATS Norway for more information Please provide reference number upon request: 21745 Specifications: Model year: 2018 Hours: approx. 4700 Weight: 5808 kg Power: 36.5 kW Undercarriage (see photos) Nedexvlgfspfx Aa Eelk Rubber tracks Track width: approx. 40 cm Machine width: approx. 200 cm S50 quick coupler Engcon tilt rotator (from 2018) Digging bucket Grading blade Central lubrication Extra lights Radio/CD Air conditioning Description:Volvo ECR58D tracked excavator from 2018 in good condition.Comes with Engcon tilt rotator and digging bucket.Additional buckets available at extra cost.Can be delivered on short notice. Hours: 4700 Own weight: 5808 Width: 200 Kw: 36,5 Model: ECR58D Beltegraver m/ tilt og skuffe

Condition: used, Year of construction: 2005, operating hours: 10,000 h, Serial number: 05xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22025 Specifications: Model year: 2005 Hours: approx. 10,000 (not guaranteed) Weight: approx. 6750 kg Tyres (see pictures) Tyre dimension: 460/65 R24 Nsdpfxjx Hnz Ao Aa Ejlk Hydromann snow blower Bucket, 215 cm wide Hydraulic pallet forks Rear hydraulic outlet Central lubrication Quick coupler Rear-view camera Camera following the pallet forks Rotating beacon Extra work lights Radio/CD Climate control/AC Description:Lundberg 6200 wheel loader for sale with extensive equipment.The hour meter has stopped; the owner estimates around 10,000 hours.There are cameras both front and rear.Tiltable quick coupler at the rear.Can be delivered at short notice. Hours: 10000 Own weight: 6750 Model: 6200LSE hjullaster m/ snøfres, skuffe og pallegafler.

Condition: used, mileage: 156,000 km, Year of construction: 2021, Serial number: WMA30EZZ5MM87xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21127 Specifications: Km: 156,000 (will increase) Transmission: Automatic Suspension: Steel front, air rear 6x2 Tires (see pictures) Nljdpfxjw Radij Aa Ejk Retarder Euro 6, 581 hp Tow hitch VBG Nor Slep tipper box Toolbox Nor Slep asphalt body Air horn Extra lights Box (see pictures) Bed Radio/CD Climate/AC Video Delivery by agreement Description:MAN TGX asphalt truck with body and tipper box.The truck is EU-approved and has run 156,000 km.Delivery by agreement. Km: 156000 HK: 580 Technical approved: Yes EU-approved until: 21.09.2026 Own weight: 13950 Payload: 19975 Model: 2021 MAN TGX 33.580 6x2 Asfaltbil m/ Dumperkasse og Balje.

Condition: used, mileage: 196,000 km, Year of construction: 2018, Serial number: YV2XZX0C9JA82xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21687 Truck specifications: Km: 194,000 Gearbox: I-Shift Full air suspension Euro 6, 460 hp 3-step Volvo engine brake Maintained under Volvo service contract Platform length: 6.5 m 2-ton liftgate, Zepro with remote control Tow hitch VBG coupling Lift bogie with steering Toolboxes on both sides Side boards Rotating beacon bar Extra lights Sleeper bunk Nledpfjxr Tvmox Aa Esk Good tires Radio/CD Climate control / AC Crane specifications: HMF 2120 from 2017 Crane hours: approx. 1300 Crane diagram Reach: 17.1 meters Max lifting capacity: 3820 kg Remote control Support legs 3rd function on crane / extra hydraulic outlet for tools in the hook Description:Well-maintained Volvo FM450 crane truck from 2018.The truck is equipped with a 21 t/m HMF crane and a 2-ton liftgate.Remote control for both crane and liftgate.Ready for delivery. Km: 196000 HK: 459 Technical approved: Yes EU-approved until: 17.10.2026 Own weight: 14555 Total Weight: 28000 Payload: 13370 Width: 255 Length: 1000 Euro: 6 Model: FM450 Kranbil m/ 21 t/m HMF kran og Løftelem. 194 000 km!

Condition: used, Year of construction: 2018, operating hours: 15,862 h, CE mark: yes Serial number: vcec980ej00311xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21973 Specifications: 2018 model 15862 hours Certified to: 04/26 226 kW Weight: 43000 kg Machine width: 375 cm Belt width: 60 cm Chassis (see pictures) Some people read belt plates S90 attachment Tooth bucket (2.4 m3) Nlsdpfox Dg U Tsx Aa Esk Central lubrication Auxiliary hydraulics Right side cover is strapped on (see pictures) Whole track guides Services taken in progress Light Radio Air conditioning/ac Videos Ready for delivery   Description: We have a 2018 Volvo ec380EL excavator w/ hw undercarriage and toothed bucket for sale. The machine functions as it should according to the owner. Some loose track plates are present. S errors and omissions occur. Ready for delivery Hours: 15862 Own weight: 43000 Year controlled: Yes Year controlled until: 04/26 Width: 375 Kw: 226 CE: Yes Model: EC380EL

Condition: used, Year of construction: 1997, machine/vehicle number: YS2P6X2000123xxxx, Please contact ATS Norway for more information Please provide reference number upon request: 19904 Specifications: EU approved until 12.05.2026 Mileage: approx. 347,000 km Transmission: Manual Steel suspension front, air suspension rear Engine brake Tyres: see pictures Steering on 3rd axle Nlodpov U S R Sjfx Aa Eok Atlas XAS96 compressor Approx. 8-meter lift Lift approved until 06.2025 Support legs Rotating light bar Climate control / AC Ready for delivery Video available Description: Scania P114 lift truck from 1997.Equipped with an Atlas compressor and an approx. 8-meter lift.The lift is approved until 06.2025.Ready for delivery. Km: 347000 Technical approved: Yes EU-approved until: 12.05.2026 Own weight: 17880 Total Weight: 26500 Payload: 8545 Width: 250 Length: 923 Euro: 2 Model: P114 Liftbil m/ Atlas kompressor og 8 meters Lift. EU ok Gearbox: Manual

Condition: used, Year of construction: 2015, operating hours: 7,473 h, Serial number: dhkceaaucf6001xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21920 Specifications: 2015 model 7473 hours 36.2 kW Weight: 6250 kg Machine width: 197 cm Movable boom Chassis (see pictures) Cut Nedpfxex Aavzo Aa Eolk Rubber belts Yanmar engine Central lubrication Tiltrotator Sanding bucket Excavator bucket Auxiliary hydraulics Air conditioning/ac Light Radio Ready for delivery Description: We have a 2015 Doosan DX62R-3 excavator with rototilt, sanding bucket and backhoe bucket for sale. The machine works as it should according to the owner and it comes with 2 drawers and a rototilt. The machine is in weekly operation so the number of hours will increase slightly. Ready for delivery Hours: 7473 Own weight: 6250 Kw: 36.2 Model: DX62R-3 gravemaskin m/ rototilt, pusseskuffe og graveskuffe

Condition: used, Year of construction: 2013, operating hours: 11,170 h, Serial number: KMTPC180K55K5xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21438 Specifications: Model year: 2013 Approx. 11,170 hours Power: 116 kW Operating weight: 22,260 kg Undercarriage: see photos Track width: 60 cm Machine width: approx. 300 cm Digging bucket Grading bucket Hydraulic breaker Indexator tiltrotator (2013) S70 quick coupler Rear-view camera Central lubrication Work lights Beacon light Radio/CD Climate control (A/C) Description:Komatsu PC210 tracked excavator from 2013 for sale.The machine is equipped with tiltrotator, grading bucket, digging bucket, and hydraulic breaker.Well maintained and ready for work.Available for quick delivery. Hours: 11170 Own weight: 22260 Width: 300 Nlsdpfx Aaoxgm Ewo Eok Kw: 116 Model: PC210LC-8 Beltegraver m/ 2 skuffer, tilt og Pigghammer

Condition: used, Year of construction: 2021, Serial number: hcmdeq50j0009xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20012 Specifications: 2021 model 1100 hours (doesn't matter) 42.2 kW 8730 kg Machine width: 232 cm Additional hydraulics Central lubrication Track steering Engcon proportional tiltrotator Undercarriage in good condition Multi-X coupling on hydraulics Webasto Taillight rig on the solder Sanding tray Tiltrotator with clamp Air conditioning Radio Toolbox Ready for delivery Description:We have a 2021 Hitachi ZX85US-6 tiltrotator excavator with grapple and sanding bucket for sale.According to the owner, According to the owner, it was taken out 6 months ago in 2022. According to the owner, everything works as it should. The machine has few hours.Service is carried out by the owner.The machine is ready for delivery. Own weight: 8730 Nodpfxjv U S Tyj Aa Ejlk Model: zx85us-6 gravemaskin m/ rototilt med klype og pusseskuffe