Feeder

ARBOR Destacker and feeder for planer

Condition: good (used), Year of construction: 1975, functionality: fully functional, planing width: 860 mm, planing height: 310 mm, working width: 860 mm, working height: 750 mm, chip removal: 20 mm, rotational speed (max.): 4,200 rpm, number of planer blades: 4, heavy-duty thickness planer, very well suited for construction timber, etc., constant table height, sturdy roller conveyor with drive in the infeed area, sturdy roller conveyor without drive in the outfeed area Bledexfl A Sjpfx Alcjh

Year of construction: 1988, condition: repair required (used), mechanisation for planer infeed Bljdpjvbtpefx Alcoh -For lengths up to ca. 13 m -Ideal unit for KVH (solid construction timber)and BSH (laminated beams) in front of the planer -1 operator -lateral destacking unit -separation -4 cross cut saws -cutting cross section 180x220 mm, 150x300 mm

Condition: good (used), Year of construction: 2006, I sell the automatic pneumatic end cutting saw Weinig Grecon Dimter Opticut 200 Elite Year 2006 Motor power 7,5kW Input table automatic feeding 4,10m (throughfeed system) Outut table automatic 6 pcs. kickers on right outfeed table Optimising with mistakes deffect reading and automatic cutting sequence modes. Bledpfx Aljxtxi Ijcsh Available immediately. CE version. Documentation included.

Condition: new, Year of construction: 2026, 10T Ramp, Usable Internal Width 1.7m – TM-GROUP, the Best Choice on the Market ✅ Specifications: - Manufacturer: TM-GROUP - Maximum Load Capacity: 10 tons - Internal Ramp Width: 1700 cm - Reinforced side railings on both sides - Ramp rollers for easy movement - Central ramp handle for forklift repositioning - Adjustable slope and flap height - Dual reinforced ramp supports - Moving parts equipped with grease fittings - Ramp also equipped with a winch - ELECTRIC and manual ramp height control ✅ Ramp Surface Grating: Grating with anti-slip grooves. Safe and secure surface. Both forklifts and pedestrian movement enjoy the best possible grip and solid support. Competitors typically offer ramps with a metal sheet covered with mesh. Our product features grooved grating – a much more durable solution that prevents dirt from staying on the ramp and ensures the forklift doesn't slip. ✅ Forklift Mount – Installable on Both Sides: Convenient and quick forklift attachment allows for ramp transport in all directions. The specially designed handle enables maneuvering the ramp even in tight spaces. ✅ Chain for Connecting to TIR Truck, Railway Car, or Fixed Warehouse Dock: A solid steel chain is another strength of our ramp, providing additional safety by preventing the ramp from shifting during loading operations. ✅ Sturdy Side Railings: Safety railing with the option to detach and install a frame/roof structure (roof is optional). ✅ Electric Height Adjustment Control: Smooth electro-hydraulic drive powered by a high-end pump. The pump requires only 230V, making it usable with a standard power outlet. ✅ Dual-Action Manual Pump: Bjdswa Nr Nepfx Alcelh Hydraulic pump for height adjustment in case electro-hydraulic power is unavailable – dual lifting mechanism. This is an ideal solution for working in all conditions. ⭐️ We Offer the Following Variants: ⭐️ Driveway widths: 1700 cm, 2000 cm, and 2500 cm – Standard, Premium, and Premium Plus. Mobile ramps with load capacities of 10 tons, 15 tons, 20 tons, and 25 tons. Ramp grating thickness: 3–5 cm. Colors: red, blue, black, and green (custom colors available on request) Mobile ramp with tarpaulin cover. As a manufacturer, we can produce ramps tailored to special, individual orders – in different sizes, load capacities, and configurations. Need a custom solution you can’t find anywhere else? Contact our specialist. Tags: Loading ramp, unloading ramp, loading dock, mobile ramp, loading bay, transfer dock, mobile loading dock, mobile loading ramp.

Condition: excellent (used), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, equipped with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roller feed unit Bsdpfx Ajwvqklelcslh Planer/moulder with reinforced KASCHWIG three-sided soundproof enclosure • Max. working width: 230 mm • Max. working height: 160 mm • Electronic feed, frequency-controlled, 8–80 m/min • Feed motor 18.5 kW • 1st spindle bottom 11.0 kW • 2nd spindle right 11.0 kW • 3rd spindle left 11.0 kW • 4th spindle right 11.0 kW • 5th spindle left 11.0 kW • 6th spindle top 15.0 kW • 7th spindle bottom 11.0 kW • 8th spindle top 15.0 kW • 9th spindle bottom 15.0 kW • 10th universal spindle 11.0 kW (four-sided) • Spindle speed 6,000 rpm • Spindle diameter ø 50 mm • All spindle motors equipped with NEW motor start/stop brake units • Pneumatically supported top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced spacing between feed rollers • Hard-chromed table plates • Hard-chromed fences • Pneumatically supported side pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Connected load approx. 145 kW / approx. 400 A • Free-standing electrical cabinet • Operating instructions, spare parts list and wiring diagram included • Machine sold without cutterheads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 kg Factory-new WEINIG components installed: NEW horizontal/vertical spindle NEW counter bearings All spindles with HL bearings All motors newly fitted NEW electronic motor soft start/brake devices NEW hard-chromed table plates NEW hard-chromed fences Many other new parts fitted in the machine Condition: see attached photos – technically in excellent condition Infeed mechanization unrefurbished – complete – fully functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Errors and prior sale excepted.

Condition: as good as new (ex-display), Year of construction: 2017, functionality: fully functional, Filter for extraction of dust and sawdust. Bedetzld Ujpfx Alcslh

Condition: excellent (used), Year of construction: 2021, operating hours: 9,500 h, functionality: fully functional, machine/vehicle number: 3284, Standard version of RUF Lignum R2 with outfeed channels, el.motor 22 kW, briquette sizes 150x60 mm capacity up 500 kg/h Blodsyyl Srspfx Alceh

Condition: ready for operation (used), Year of construction: 1981, WEINIG Hydromat H25R, S/N 2603-624, year of manufacture 1981, with walk-in acoustic enclosure KASCHWIG – ALMOST NEW from 2017 Bsdpfx Aletkt Tpecelh • Short infeed table with heavy-duty 6-roller infeed 1st spindle bottom 11.0 kW 2nd spindle right 11.0 kW 3rd spindle left 11.0 kW 4th spindle top 15.0 kW 5th spindle bottom 11.0 kW 6th spindle bottom 11.0 kW • Hydraulic feed 6-60 m/min. • Feed motor 22.0 kW • 4x powered table rollers • Spindle diameter 50 mm • Automatic table lubrication • Spindles 1 + 4 + 5 + 6 with counter-bearings • Spindles 1 + 4 with straight jointer • Feed rollers 170 mm • 4 pcs. hydro planer heads 150 mm • 6 pcs. hydro planer heads 250 mm • Extraction hood above the machine

Year of construction: 2019, condition: as good as new (ex-display), Aluminum flat conveyor including 4 suspension points Dim: 3000 + 520 x 105mm Conveyor belt width 400mm PVC conveyor belt incl. Studs and wave edge * optional with magnetic deflection roller at the end of the conveyor belt. Beded Ra Ttepfx Alcelh * optionally with substructure * Special designs in all versions possible.

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 116387, planing height: 160 mm, planing width: 260 mm, total width: 145 mm, total height: 170 mm, total length: 375 mm, workpiece weight (max.): 2,100 kg, workpiece height (max.): 160 mm, compressed air connection: 8 bar, type of input current: three-phase, workpiece width (max.): 260 mm, input voltage: 400 V, table length: 2,500 mm, number of spindles: 4, extraction connection diameter: 250 mm, power: 18 kW (24.47 HP), input frequency: 50 Hz, input current: 63 A, Equipment: motor brake, Weinig Cube 4-sided planing machine for sale. Offered for sale due to very little use in our workshop. Originally supplied and always serviced by De Groot Bewerkingmachines. Machine operates perfectly. Currently disconnected and packed, but can be demonstrated in operation upon serious interest. Year of manufacture: 2011 Weight: 2,100 kg Connection value: 400V 63Ah Air pressure: 8 bar Power: 18 kW (25 hp) Extraction connection: 250 mm 1x Max. planing width: 260 mm Max. planing height: 160 mm Minimum planing length: approx. 400 mm Infeed table length: 2,500 mm All values adjustable via touchscreen display Visible removal indication by laser lines Total machine length: 375 cm Total machine width: 145 cm Total machine height: 170 cm Incl. planing heads with knives. Bodpfx Asxhcizelcelh This is a good quality machine.