Demolition Excavator

Hitachi ZX350LC-3 with standard earth boom and long-front boom

Condition: new, Year of construction: 2026, type of input current: AC, input voltage: 400 V, overall weight: 66 kg, Our electric chainsaw with 5 kW is ideally suited for sawing stacks of firewood in conjunction with our sawing buck. By sawing entire bundles of firewood, a significant amount of manual labor is eliminated! Gbodpfxsfnrx Tj Aciot In a one-person operation, up to 1 cubic meter of wood can be processed within a few minutes, and approximately 5 cubic meters per hour. The average time per cut is 1.5 minutes.

Condition: used, Washing machine Manufacturer: Nowicki Model: MPU-600/1P Made of stainless steel Dimensions: 390x140x200cm Electric power: 7.7kW Voltage: 3 x 400V 50Hz Weight: 740kg Gedpfx Ajttz Urocijbt

Condition: used, New: Yes Working width: 750 cm Gbedjx Tgb Iepfx Acijt

Condition: new, Year of construction: 2026, Drum chipper series ATH-220/530/3 | ATH-220/730/3 | ATH-220/1060/3 Gbjdpfx Acswbv Ereijt S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation Series ATH-220/530/3 | ATH-220/730/3 | ATH-220/1060/3 - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg *depending on chipper length, kW main motor, number of knives, feed Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: good (used), Year of construction: 1995, Screw compressor Manufacturer: Atlas Copco Type: XRHS 385 Year of manufacture: 1995 Operating hours: approx. 12,865 h Delivery pressure: 20 bar Godpovi Hplsfx Acijbt Output: 224 kW Engine: OM441LA Weight: 5.8 tons

Condition: good (used), Year of construction: 2019, functionality: fully functional, total length: 1,650 mm, total width: 1,770 mm, total height: 1,580 mm, input voltage: 400 V, type of input current: three-phase, pressure: 5 bar, temperature: 75 °C, power: 15.4 kW (20.94 HP), maximum load weight: 350 kg, workpiece weight (max.): 350 kg, cage diameter: 1,100 mm, TRL 1100 - 2021 - €8,500 Industrial washing machine for cleaning and degreasing workpieces using an alkaline cleaning agent. The machine is entirely made of stainless steel AISI 1.4301. It features double walls with insulation in between. A rotating basket for parts is included, with spray nozzles for detergent positioned both above and below. An integrated filter removes coarse contaminants. The machine is equipped with a detergent pump and a drain pump to remove the used cleaning fluid. Level switches in the tank detect the fluid level. Leakage is monitored. The control cabinet has a digital temperature display. The cabinet is also equipped with a signal lamp to indicate the status. The machine is in very good condition and can be used immediately in your production process. Gjdpewfdpmjfx Acisbt

Condition: used, Wig welding machine, DALEX, type GL/W 201 WIG welding machine Machine no.: 201, year of manufacture approx. 1995 Power: 200 amps, 35% duty cycle 160 amps, 60% duty cycle 120 amps, 100% duty cycle Adjustment range: stepless Type of current: DC - direct current Mains connection: 400 volts, 50 Hz, 5.9 kVA, 32 amp plug - 2-cycle and 4-cycle welding system - WIG hose set, 8 meters - HF ignition Gedpfx Asi E Izvociebt - Shielding gas pressure regulator - Electrode welding for coated electrodes - Fan cooling - Connection socket for foot switch (without foot switch) Space required L x W x H: 850 mm x 450 mm x 700 mm Weight: 90 kg The welding test yields very good results when welding stainless steel with direct current. Otherwise, the machine is in very good condition.

Condition: used, bore capacity in steel (diameter):5 mm throat:100 mm bore stroke:30 mm voltage:220/380 V Godpfx Aocxxmlociebt turning speeds:2820 U/min clamping table:170 x 120 mm workpiece height max.:120 mm total power requirement:200 W weight of the machine ca.:35 kg dimensions of the machine ca.:0,25 x 0,43 x 0,5 m

Condition: reconditioned (used), functionality: fully functional, fuel type: diesel, fuel consumption per hour: 20 l/h, fuel tank capacity: 500 l, color: yellow, overall weight: 45,000 kg, lifting height: 28 mm, chain condition: 80 %, emission class: euro3, shovel volume: 3 m³, Year of construction: 2006, operating hours: 13,030 h, machine/vehicle number: 7004, Equipment: adjustable boom, air conditioning, cabin, hammer hydraulics, head guard, hydraulics, onboard computer, standard shovel, steel tracks, tilting carriage, Komatsu PC450 high reach demolition machine. Gbjdpjultfnefx Acijt Max height 28m. Two boom set, high reach and standard demolition. Two demolition shear: - Trevi Benne HC15ND for primary demolition - Trevi Benne FR35 for secondary demolition Quick, hidraulicaly operated boom change coupler Tiltable operator cab.

Condition: new, functionality: fully functional, Year of construction: 2026, All-round fiber laser metal tube cutting machine Multiple function options help the laser tube cutting machine be used in numerous tube cutting processes. The slender nozzle allows the laser tuber cutter to avoid interference and cut various types of tubes, including special-shaped tubes like H-Beam, P-Beam, I-beam, etc. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Gsdpfx Aohwrhieciebt Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. BodorGenius, combined with the lightning-quick piercing process, completes the whole piercing during it moves down on Z-axis. Thanks to the technology, no reworking is necessary for medium and thick sheet piercing. Angle steel and channel steel cutting are standard with no need fior additional installation. Optimized edge searching method and algorithm guarantee higher cutting precision and better steadiness of the laser cutter. Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W Maximum machinable tube length: 6500mm/9200mm Chuck drive types: NC electric chuck Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING