Used Water Softening Plant for sale (9,956)

Year of construction: 2016, condition: good (used), machine/vehicle number: 3385, The cost-effective drainage of condensate for your compressor. The oil is separated from the water with a filter set (ATTENTION: filter set is not included in the scope of delivery) Tsdpfxoqmmkks Aa Iec The purified water (only in conjunction with the filter set) is approved for discharge into the sewer. Guarantee and warranty are excluded in this advertisement. Price on request.

Year of construction: 2017, condition: good (used), machine/vehicle number: 4066, The cost-effective drainage of condensate for your compressor. The oil is separated from the water with a filter set. The filter set is included in the scope of delivery. Tjdpoqmmvcjfx Aa Ioc The purified water (only in conjunction with the filter set) is approved for discharge into the sewer. Guarantee and warranty are excluded in this advertisement. Price on request.

Condition: good (used), HK Refrigeration Refrigeration plant Consists of twin fan and compressor Tedpeqqhr Nefx Aa Ijc

Condition: refurbished (used), Year of construction: 2022, operating hours: 1,518 h, functionality: fully functional, power: 260 kW (353.50 HP), year of last overhaul: 2026, Basic Inventhor 6 package: Load-Sensing System Fuel tank, 500 liters Tjdpfx Aasxx N Dgo Ijc Longitudinal belt: belt length 2,900 mm, belt width 800 mm centrally arranged lubrication strips 24V electrical control system - additional electric pump for operating the following functions when the engine is stopped: raise/lower/tilt rear belt, open/close comb flap, open/close comb, raise/lower folding chute complete radio remote control large side GRP maintenance doors easy-to-maintain engine compartment LED lighting package: engine compartment and rear hydraulically reversible fan wheel three-sided loading protection folding chute fire extinguisher maintenance ladder toolbox acoustic start-up warning Doppstadt telematics system paint: RAL2011 traffic orange Additional equipment: Drive train 260 kW - EV 2-axle semi-trailer chassis Shredding system Size L - 20 teeth Additional hydraulic connection 35 - 80 l/min Hydraulic drive Rear belt 7 m Over-belt magnet, neodymium Frame for over-belt magnet, 7 m Delivery date will be agreed upon.

Year of construction: 2025, condition: new, Parker-Airtech presents the latest generation of nitrogen generators, which impress with an outstanding air factor on the market. Our systems are characterized by the exclusive use of high-quality components, which ensures their longevity and reliability. The cost-effective operation of the system is characterized by low power consumption with maximum output, low-maintenance operation of the system, no additional gases such as hydrogen to reduce oxygen and high-quality and durable components. This means that the system can pay for itself in the shortest possible time. An intelligent monitoring system enables continuous monitoring of the operating parameters and ensures that you are always informed about the status of your system. Whether in the office or on the go - our system can also be conveniently viewed on your mobile phone, so that you always have control over your nitrogen production. The system is individually tailored to your needs. Tjdpfx Aswzv Hisa Ioc Parker-Airtech has made it its mission to offer you the best technologies to optimally support and maximize your processes. Trust in innovation, quality and performance - choose Parker-Airtech.

Condition: good (used), Year of construction: 2022, operating hours: 2,806 h, functionality: fully functional, Equipment: Basic Package Inventhor Type 6 Load-sensing system Fuel tank 500 liters Longitudinal conveyor: length 2,900 mm, width 800 mm Centrally arranged lubrication strips Tedpewnfwqofx Aa Iec 24V electronic control – additional electric pump to operate the following functions when the engine is off: "raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper" Complete radio remote control Large side GRP maintenance doors Maintenance-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan Three-sided loading protection Folding hopper Fire extinguisher Service ladder Toolbox Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Special Equipment: Powertrain 310 kW - EV 3-axle drawbar trailer chassis unit Shredding system Size L 600/4 - 30 Z Additional hydraulic connections 35 - 80 l/min Hydraulic drive Rear conveyor 4.9 m Overband magnet neodymium Frame for overband magnet

Condition: used, Year of construction: 2008, operating hours: 110 h, functionality: fully functional, power: 834 kW (1,133.92 HP), fuel type: gas, Jenbacher J316 Bio Gas generator containerized set - Manufacturer: Jenbacher Tsdpfx Aajy S Ttbo Ijc - Model: J316 - Hours 110k - Year of Manufacture: 2008 - Rated Output Power: 834 kW - Frequency: 50 Hz - Alternator: Stamford New alt installed 2017 -XT4 New turbo installed 2k hours ago. Contact for more info.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, 1 x Damak 176-pocket intermediate proofer with adjustable timings for dough resting. Fitted with removeable pockets for ease of cleaning. Manufacturer - Damak Makina. Model - DM IP 176. Date of manufacture - 2021. Tedpfx Ajy Aicmja Ioc Input height - 800mm. Output height - 1550mm. Electrical requirements - 415 V / 50 hz / 3 phase. Power - 5 kW / 13 Amps.

Condition: used, DAF Plant Tedpfxjy Au Arj Aa Isc Comprising of: - DAF plant white water system Chemical dosing Polymer mixing Air compressors and control system. Feed pumps and blower available if required. *Drawings available* Located in Bristol, UK (Buyer to remove)

Condition: used, Year of construction: 1993, Additional title: Microfiltration Material: stainless steel Base construction: on stainless steel frame with feet Tjdpfx Asztwz Nsa Ioc Features: 32 filtration modules, pumps, pipes, valves, control cabinet

Condition: used, Year of construction: 2019, Fruit reception: Water bath, fruit conveyor with water shower, chopper Packing press type H65: Capacity: 1,200 kg/h Yield up to 75% 24 press inserts (65 x 65 cm) 22 press cloths (100 x 100 cm) Dimensions: 2,330 x 840 x 2,060 mm Additional title: Fruit reception with water bath, fruit conveyor, chopper and packing press Capacity: 1200 kg/h Features: Water bath, fruit conveyor with water shower, chopper, packing press with 24 press inserts and 22 press cloths Todpfxozty Ixj Aa Ijc

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 111302, functionality: fully functional, temperature: -75 °C, total length: 1,300 mm, total width: 1,300 mm, total height: 2,000 mm, usable tank capacity: 100 l, The system was professionally dismantled and decommissioned by the manufacturer. The plates were stacked together. TECHNICAL DETAILS Ice condenser volume: 100 l Ice condenser capacity: 12 kg Ice condenser output: 8 g/24 h Ice condenser temperature: −75 °C MACHINE DETAILS Platform dimensions: 350 × 450 mm Platform area: 0.48 m² Platform spacing: 111 mm Refrigerant: Isceon 89 Tedszrfa Djpfx Aa Ijc Heat transfer fluid: Syltherm HF Electrical equipment: 400 Volt, 3 phases, 50 Hz Dimensions & Weight Space requirement for freeze-drying system: 1,300 × 1,300 × 2,000 mm Space requirement for additional component: 1,800 × 600 × 2,000 mm Weight: approx. 1,500 kg

Condition: new, functionality: fully functional, power: 196 kW (266.49 HP), fuel type: electric, color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO PRO Serie is a mobile type closed circuit crushing plant that is suitable for especially limestone and other types of stones with hardness level is soft or medium. MAIN FEATURES: * Closed circuit crushing till to get desired size of product * Capacity is variable according the material feed and final product dimensions to be crushed. * All equipments are assembled on single special heavy duty construction chassis, transportable by 1 truck. Todpfx Aaozi Uyzs Ioc * Conveyors are foldable * Up to 3 different sizes of aggregates * Since the whole plant is built in one chassis, it has the advantage of the fastest production line * PRO Serie Mobile Crusher Plant can be used by single operator, feed can be done by truck, loader or excavator * Plant can be installed in 2 days with its special heavy duty construction chassis * With its multifunctional primary impact crusher, plant can crush different product sizes with high capacity * It is equipped with 3 axle, air-controlled brake system and signaling system. * Hydraulic system is controlled by remote system * All motors are under protection with metal sheet covers * The dust suppression control system prevents dusting by conveying high pressure water. * Mobile system has complete fully automation system. Also the plant can be controlled by using tablet with single staff. PRO 90 CRUSHING AND SCREENING PLANT -Bunker: 20 m3 -Plant Dimensions: 16870x4552x4627 mm -Production Capacity: 90-130 Tons Per Hour -Crusher Type & Rotor Size: Turbo Impact – 1100x900 mm -Maximum Feeding Size: 500 mm -Vibrating Screen Size and Deck: 1400x4000 mm 3-4 decks -Total Motor Power: 196 Kw -Generator Capacity: 400 kvA → PRO 90 IS A COMBINATION OF : • Bunker • Vibrating Feeder • Turbo Impact Crusher • High Stroke Type Vibrating Screen • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: excellent (used), Year of construction: 2021, operating hours: 2,500 h, functionality: fully functional, overall weight: 1,100 kg, rotor diameter: 700 mm, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 3,400 rpm, power: 90 kW (122.37 HP), Equipment: rotational speed infinitely variable, This shredding machine is exceptional and highly innovative. The material to be processed is shredded particle by particle in 6 rows of small chambers, while simultaneously the particles are flung against the grinding surface. The combined effect results in a very fine grain size – and it is possible to dry the material being shredded at the same time. Keywords: Turbo mill, impact mill, eddy current mill. Depending on the material, the machine can shred to a particle size of less than 1000 µm to 5 µm. The throughput rate is between 100 and 900 kg/h, depending on the material. Todpfx Aaozl Shzo Isc The applications range from minerals, industrial products, powder coatings, chemicals, dyes to food and feed. The innovations of the machine are: • the plug-in connections for the wear tools (always in the same place with minimal tolerances) • rotation in both directions – this ensures that the tools are worn down evenly on both sides • conical design – allows the cutting gap to be adjusted precisely to 0.1 mm with only 12 screws. Technical data: • Drive power 90 kW – frequency converter (FU) is essential – frame size 90 kW with 150% overload for 60 seconds. • Speed up to 125 m/s • Tools: Rotor and stator made of hard metal, available in various degrees of hardness; ceramics are also possible. • Machine monitoring via bearing temperature measurement and vibration measurement included. • Control panel is not included. The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production plant in Europe.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Air heater, deflection rollers, feed modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW th, installed electrical power 690 kW el. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the opening of the exhaust duct and the dryer. The dryer is designed for an outside temperature down to -40°C, the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The working platform of the dryer is located on approximately 8.00 m high steel supports and is enclosed with thermally insulating sandwich panels. A hall or other production components can be inserted under and between the supports (see under Documents, Steel Structure). The system has been disassembled and stored by an experienced assembly team, and this team can be arranged for transport and reassembly. Please note: We are selling exclusively this belt dryer and no other parts! Please direct your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much! Tjdpezw Apgofx Aa Iec

Year of construction: 2018, operating hours: 4,700 h, condition: ready for operation (used), functionality: fully functional, For sale are four used cogeneration units, type ENGUL 310 XACB, in an open-skid design. The units consist of a gas engine, a generator, and the corresponding technical components. The systems have previously been operated with syngas/synthesis gas and are suitable for professional operators, plant builders, as well as Tedpfxozyc Eaj Aa Isc projects for reuse, overhaul, or technically verified fuel conversion. Of particular interest is the low operating hours of approximately 4,700 engine hours. In addition, photo documentation and operating displays are available, which document the synchronous parallel operation of the four units.

Condition: good (used), Year of construction: 2018, Installation for continuous monitoring of water quality. Completely assembled in a closed, air-conditioned monitoring room (portable). The system consists of 3 components: * LAR Biomonitor * LAR QuickTNPO * LAR QuickTOCultra Tjdpszgcnbofx Aa Ijc

Condition: used, Year of construction: 2016, Laminate Coating System Manufacturer: Type: Master PUR-1400 Year of manufacture: 2016 Technical data Professional PUR hot-melt laminating system for acrylic, PET, PVC, HPL, and CPL sheets General description The MASTER PUR-1400 is a professional, high-performance laminating system designed for single-sided lamination of sheets with PUR hot-melt adhesive. The system is suitable for continuous industrial production and offers excellent surface quality with low adhesive consumption. It is designed for the production of high-quality furniture panels, interior design components, wall panels, and decorative panels. Suitable substrates The machine is suitable for laminating: MDF Chipboard Plywood PVC sheets Gypsum boards Other wood-based panels Compatible surface materials The system is designed for processing the following materials: Acrylic sheets (high gloss & super matte) PET film PVC film HPL laminate CPL laminate Decorative paper Technical data Working width: 1,400 mm Maximum sheet size: 2,800 x 1,300 mm Sheet thickness: 2-40 mm Production speed: 5-17 m/min Throughput: 3-5 sheets/min Maximum productivity: up to approx. 1,200 sheets per 8-hour shift Installed motor power: 21.49 kW Heating power: 51.7 kW Overall dimensions of the machine: approx. 16 x 2.5 x 2 m Required installation area: at least 6 x 22 m System configuration The production line includes: Automatic feeding system with roller conveyor Brush cleaning system for sheets Infrared preheating oven (IR) 3-roller PUR adhesive application system Feeding station for decorative material Laminating press with pressure rollers Take-away conveyor 208-liter melting tank for PUR hot-melt adhesive Advantages Excellent laminating quality Uniform PUR adhesive application Suitable for high-gloss and super-matte acrylic surfaces Low adhesive consumption Tsdpfx Aszuzkqja Ioc Stable and reliable operation in industrial series production High production efficiency Easy operation and maintenance Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: good (used), Water jet high-pressure pump, high-pressure pump for water jet cutting, water jet cutting, water jet cutting system, pressure boosting cylinder, pressure boosting -Manufacturer: Deter Fluidtechnik, high-pressure pump for waterjet cutting with water tank and feed pump -High-pressure pump: Type PP1205/110V -Centrifugal pump: Calpeda NM 1/AE -Container: Stainless steel Tsdpjzfgb Aofx Aa Iec -Individual components: see photos -Dimensions: 1580/410/H600 mm -Weight: 118 kg

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1873778, pressure: 4,000 bar, overall weight: 1,055 kg, Manufacturer: Uhde High Pressure Technologies GmbH Type: HPS 4022 Year of manufacture: 2015 Motor power: 22 kW Stroke length: 182 mm Plunger diameter: 19 mm Maximum flow rate: 2.3 l/min at 4000 bar Todpfxezz Ache Aa Ijc

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, WOLFF - Sand separation and washing plant Tjdpfx Aajy N Rtyj Ioc

Condition: used, Year of construction: 2006, operating hours: 100,000 h, functionality: fully functional, feed rate X-axis: 30 m/min, workpiece weight (max.): 50 kg, working width: 1,400 mm, suction capacity: 48,000 m³/h, type of input current: three-phase, total height: 2,800 mm, total length: 68,000 mm, total width: 2,600 mm, working height: 75 mm, power: 720 kW (978.93 HP), input frequency: 50 Hz, input current: 1,800 A, operating pressure: 6 bar, workpiece width (max.): 1,250 mm, compressed air connection: 6 bar, complete lacquering line: 2x Heesemann sanders (LSM8 2006.12.141, 3rollers-3pads/ LSM8 2006112.151, 2pads) 2x Heesemann cleaning mach. (EA8 2006.12.142 / EA8 2006.12.152) Todpfsv Ta Tfsx Aa Isc 1x Cefla hot air drying tunnel (FEV EU2/8 6 IRM / TNSL) 4x UV lamps dryer ( 2lamps, UV 2000 M2+CRU+TN 4000/HT / 4lamps UV 2000 M2+CRU+TN 5000/HT / 2lamps / 4 lamps) 2x stain roller coaters ( Smartcoater M-EVO / model M) 2x heavy putty roller coaters (Smartcoater SP / SP1-EVO) 3x lacuer roller coaters (Smartcoater MF) 10x belt/roller conveyors 2x hydraulic lifters (200-900mm height)

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 250 kg, Manual powder coating system, suitable for gas cylinder coating Tjdpfx Aowhbvpsa Isc

Condition: excellent (used), For sale: an industrial KSB ETABLOC-G 32-125.1/222 centrifugal pump with a 2.2 kW electric motor. Pump specifications: • Manufacturer: KSB • Model: ETABLOC-G 32-125.1/222 • Design: G11 • Identification number: 48862594 • Pump number: 5-927-141345/1 • Flow rate: 3–24.5 m³/h • Head: 27.5–17 m • Pump speed: 2900 rpm Motor specifications at 50 Hz: • Motor type: QU FS 90L2A-60 • Motor number: 367694 MX • Power: 2.2 kW • Voltage: 220–240/380–420 V • Current: 7.8–7.2/4.5–4.3 A • Speed: 2850 rpm • cos φ: 0.89 • Protection class: IP55 • Insulation class: F Todpfxjzva S As Aa Ioc • Operating mode: S1 The unit has a sticker from the Elektromotoren Reparaturwerk ROCK specialist service, indicating an inspection carried out in November 2017. The pump and motor were likely refurbished and inspected by a specialist service. Used condition. Normal signs of use and storage are visible. The exact condition is shown in the pictures.

Condition: new, For sale: a NEW, unused KSB ETABLOC-G 32-200/552.2 centrifugal pump with a 5.5 kW electric motor. The pump comes from a warehouse stock and has never been used. It is offered with the original KSB carton. A professional, industrial monobloc pump from the renowned manufacturer KSB, designed for use in industrial installations, water circulation systems, cooling and heating systems, and technological systems. Technical data: Manufacturer: KSB Model: ETABLOC-G 32-200/552.2 Ident-No.: 48862635 Flow rate Q: 5–33.5 m³/h Head H: 47.5–25 m Pump speed: 2900 rpm Motor power: 5.5 kW Power supply: 3-phase Frequency: 50 Hz Voltage: 380–420 / 660–725 V Motor speed: 2880 rpm Ingress protection: IP55 Insulation class: F Net weight according to label: 62 kg Todpfxozvrb No Aa Iec Condition: NEW / UNUSED – warehouse stock. Original KSB carton included. The item sold is exactly the one shown in the pictures.