Used Watchmakers Lathe for sale (5,595)

Condition: good (used), Year of construction: 2007, Number of NC axes: 5 Bar capacity: 42 mm Max. turning length: 100 mm Max. swing diameter: Ø 700 mm Rapid traverse: 17.5 m/min Kljdjxa Ex Nspfx Aaljp MAIN SPINDLE Max. spindle speed: 4,000 rpm Spindle power: 7.5 kW Collet chuck: DIN 173E Tool holder (square): 20x20 mm Tool holder (round): Ø 20/25 mm C-axis resolution: 0.1° TOOL POSITIONS Total: 14 Outside main spindle: 5 Inside main spindle: 3+4 Driven tools: 2 Simultaneous machining: internal + external Weight: 2,700 kg Bar feeder for 3m bars

Condition: used, Year of construction: 2000, control Siemens Sinumerik 805 turning length 1000-8000 mm Turning diameter above the facing slide 570 - 365 mm --> Technical data Precision universal lathe with programmable cycles --> Siemens Sinumerik 805 control system --> Turning length 1000-8000 mm Klodpfx Aoyu U Aujaljp --> Swing diameter of bed cross slide 570-365 mm --> Cross slide travel 345 mm --> Turning tool cross section DIN 770h x b 32 x 25 mm

Condition: not inspected (used), Year of construction: 2009, machine/vehicle number: 2805.09, Cycle Lathe DMT Kern CD 402 Condition: Not tested Delivery terms: Free loaded truck Location: 63773 Goldbach Availability: By arrangement Payment terms: Advance payment by bank transfer Internal no.: S1 Inspection under power: Can be inspected under power until 24.03. Kledpfxoyvldtj Aaljp Technical Data: Control: Heidenhain MANUELplus 620 Operating hours approx.: 2265 WORKING RANGE: Swing diameter over bed: 400 mm Swing diameter over cross slide: 230 mm Cross slide travel (X): 250 mm CENTRE DISTANCE / TURNING LENGTH: Centre distance: 1000 mm MAIN SPINDLE DRIVE: Power (Digital AC motor - 40 / 60 / 100%): 16 / 15 / 12 kW Gear steps: 2 SPINDLE HEAD: Spindle nose: DIN 55026 – Size 6 Spindle bore / clearance: Ø82 mm Spindle diameter in front bearing: 110 mm Speed range: 1 – 3000 rpm CROSS SLIDE / FEEDS: Feed transverse (X): 0.001 – 1000 mm/rev Feed longitudinal (Z): 0.001 – 2000 mm/rev Rapid traverse transverse (X): 5 m/min Rapid traverse longitudinal (Z): 10 m/min Feed force transverse (X): 5000 N Feed force longitudinal (Z): 7000 N TAILSTOCK: Quill diameter: Ø60 mm Quill travel: 140 mm Quill taper: MT 4 ELECTRICS: Connection: 400 V / 50 Hz EQUIPMENT: 8-position tool turret with three tool holders and one tool mount Tailstock Three-jaw chuck Mist filtration unit SCOPE OF DELIVERY: Available documentation A Garant drawer cabinet including a large number of tool holders, tool mounts, jaws, and drills as per the pictures DIMENSIONS & WEIGHT: Setup dimensions L x W x H approx.: 2650 x 1600 x 1900 mm Weight approx.: 2500 kg If you have any questions or would like to arrange a viewing, please contact us! Additional Notes: ► On request, we can offer transport to the destination ► The offer price is net plus VAT ► The goods are sold under exclusion of any warranty ► Technical data without guarantee ► Subject to prior sale ❗ Sale of the goods is exclusively to businesses ❗

Condition: new, Year of construction: 2025, operating hours: 40 h, functionality: fully functional, travel distance X-axis: 220 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: 828D, workpiece length (max.): 550 mm, workpiece diameter (max.): 400 mm, total height: 1,900 mm, total length: 3,010 mm, total width: 2,500 mm, rotational speed (max.): 3,000 rpm, overall weight: 5,000 kg, spindle speed (max.): 3,000 rpm, input voltage: 400 V, type of input current: AC, turning diameter: 400 mm, turning diameter over cross slide: 570 mm, bar passage: 87 mm, turning diameter over bed slide: 570 mm, turning length: 550 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, GEWA UT300 - Demonstration machine - Equipment: Control system: Siemens 828D Siemens drive components Centralized automatic lubrication system External enclosure Telescopic way cover Transformer Control cabinet Operator work area lighting Signal tower light LCD monitor Linear guides Servo tailstock Hydraulic chuck Sauter tool turret with 12 driven tools (BMT55) Renishaw tool measurement system Machine operating manual Pneumatic air gun Water gun Oil skimmer Kjdeyr A U Tspfx Aalslp Chip conveyor and coolant tank This and other machines from GEWA Werkzeugmaschinen GmbH can be inspected at our facility in the Eifel region.

Condition: not inspected (used), functionality: unexamined, turning diameter over cross slide: 100 mm, turning diameter: 440 mm, center height: 220 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 55 rpm, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the item within the scheduled period between 04.05.26 and 07.05.26. TECHNICAL DETAILS Swing over bed: 440 mm Swing over cross slide: 200 mm Spindle speed range: 55 – 1,600 rpm Spindle bore: 58 mm Distance between centers: 500 mm Center height over bed: 220 mm Center height over carriage: 100 mm MACHINE DETAILS Kljdeyr Rhujpfx Aalsp Dimensions & Weight Dimensions (L x W x H): 2,700 x 1,500 x 1,700 mm Machine weight: 2,000 kg EQUIPMENT Tailstock Multifix quick-change tool post Three-jaw chuck (diameter: 200 mm) Workshop trolley Multifix turning tool holder, Type BD 25120 Multifix turning tool holder, Type BH 32130 Centers Thread cutting dies Various indexable inserts Turning tools Jaw sets Thread cutting accessories External reference: Lot 81

Condition: like new (used), Year of construction: 1999, functionality: fully functional, MORI SEIKI SL-600B/2000 CNC LATHE Category: CNC Turning Centers Reference No.: 400212 Capacity: Ø900 X 2000 MM Year of Construction: 1999 Technical Specification: CNC Control : Fanuc 18iT WORKING CAPACITY Max Turning Diameter : 900 mm Max Turning Length : 2000 mm Swing over bed : 994 mm Distance Between Centers : 2300 mm Swing over cross slide : 733 mm Travels (X) : 485 mm (440 + 45) mm Travels (Z) : 2150 mm TURRET Turret : 12 Station Square tool shank size : 32 mm Boring bar shank diameter : 65 mm TAILSTOCK Kedpfx Aex Nv Shealelp Tailstock : MT5 Tailstock Quill Travel : 150 mm Tailstock Quill Dia : 150 mm SPINDLE Max Rotation Speed : 1500 RPM Main Spindle Nose : JIS A2-15 Main Spindle Bore : 185 mm Spindle Type : 3 Step Gearbox Spindle bearing inner diameter : 260 mm MACHINE DIMENSIONS Weight : 16T Additional Details: All Specifications are found online, and subject to verification by buyer.

Condition: used, Year of construction: 1988, machine/vehicle number: 9880760, Killinger KM5000S-M copy lathe, purchased by our company roughly 5 years ago but never put into production. no paperwork, was working when we decommissioned it. sold as seen. buyer to arrange collection from Bedford Kljdpoymd Anjfx Aaljp

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 755 mm, turning diameter: 923 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 590 mm, total height: 2,200 mm, total length: 4,000 mm, total width: 1,800 mm, overall weight: 5,000 kg, bar passage: 65 mm, controller manufacturer: MORI SEIKI, controller model: MSX-850, number of slots in tool magazine: 12, Equipment: chip conveyor, MORI SEIKI NL 2000 Y / 500 CNC lathe - Max. machining diameter: 356 mm - Y-axis travel: +/-50 mm - Max. milling speed: 6,000 rpm - Equipped with chip conveyor and HAINBUCH clamping system, diameter: 200 mm Kljdpoyvrvvefx Aalop Note: The item must be firmly collected between 12.05. and 22.05.2026, on a date to be mutually agreed. FCA D-74821 Mosbach – loaded onto truck

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: PM301222, turning length: 648 mm, turning diameter: 400 mm, spindle bore: 90 mm, spindle speed (max.): 3,500 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 282 mm, travel distance Z-axis: 1,330 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 24 m/min, total height: 2,000 mm, total length: 5,000 mm, total width: 2,200 mm, quill travel distance: 100 mm, quill diameter: 100 mm, overall weight: 5,000 kg, spindle nose: A2-8, bar diameter (max.): 77 mm, controller manufacturer: FANUC, controller model: SERIES 18i-T, Equipment: chip conveyor, documentation/manual, DAEWOO PUMA 300 B CNC Lathe - Operating voltage: 400 V - Frequency: 50/60 Hz - Rated current: 10.499 A - Connection: 40.01 kVA - Swing diameter over bed: 570 mm - Swing diameter over carriage: 370 mm - Recommended machining diameter: 255 mm - Max. machining diameter: 400 mm - Max. working length: 648 mm - Bar capacity: 77 mm - Chuck diameter: 255 mm Kedsyvru Sepfx Aalslp - Front spindle bearing diameter: 130 mm The machine is equipped with a tailstock, a 10-station turret, as well as a three-jaw chuck from SMW AUTOBLOK, diameter: 260 mm, and a chip conveyor. Attention: The item must be collected on a binding date, to be arranged, between 12.05. and 22.05.2026. FCA D-74821 Mosbach – loaded onto truck.

Condition: good (used), functionality: fully functional, machine/vehicle number: M232302, turning length: 435 mm, turning diameter: 250 mm, spindle bore: 63 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 195 mm, travel distance Z-axis: 480 mm, rapid traverse X-axis: 12 m/min, rapid traverse Z-axis: 24 m/min, total height: 2,200 mm, total length: 8,000 mm, total width: 2,400 mm, overall weight: 5,000 kg, bar passage: 52 mm, spindle nose: A2-5, controller manufacturer: FANUC, controller model: SERIES 18i-T, Equipment: chip conveyor, rotational speed infinitely variable, NAKAMURA TOME WT-250 CNC Lathe - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 225 A - Connection: 62 kVA Kodpfx Aoyvrthjaljlp - Swing diameter over bed: 250 mm - Swing diameter over carriage: 250 mm - Standard turning diameter: 100 mm - Max. bar capacity: 51 mm - Chuck size: 6 inch - Front spindle bearing diameter: 90 mm - Tailstock travel: 620 mm - Tailstock rapid traverse: 24 m/min - Ball screw diameter: 32 mm - Ball screw pitch: diameter 12 mm - Distance between spindle noses: min. 250 mm, max. 870 mm - Positioning accuracy of feed axes: 0.05 mm The machine is equipped with a sub-spindle, HAINBUCH clamping system, a main spindle with HAINBUCH clamping system, a twin turret with the tool holders as shown on the turret, as well as a bar feeder from KUPA, model LM92P, along with chip conveyor and transformer. Attention: The item must be collected between 12.05. and 22.05.2026, with the exact date to be agreed upon. FCA D-74821 Mosbach – loaded onto truck

Condition: excellent (used), Year of construction: 1995, CNC lathe AVM Angelini Type Snupy E 415 Year of manufacture 1995 Kledpfsvt U H Hex Aalep CNC control Fanuc 21 i-T Swing diameter 415 mm Turning length 600 mm Speeds up to 4500 rpm Spindle power 15 kw Revolver 11-way Ejector collecting device Tools Motorized automatic tailstock Tools Weight 4 tons

Condition: excellent (used), Year of construction: 2003, CNC lathe Angelini Oscar, built in 2003; GE Fanuc Series 21i - T Permissible diameter on the slide: 320 mm Recommended turning diameter: 220 mm Maximum turning diameter: 320 mm Turning length with chuck: 600 mm X-axis travel: 270 mm Z-axis travel: 720 mm C-axis Ksdpfovt U Hyox Aaljlp 12x -VD30 X-axis rapid traverse: m/min 24 Z-axis rapid traverse: m/min 32 Spindle nose: ASA 5" Spindle bore: 61 mm Bar capacity: 52 mm Spindle motor power: kW 15 Maximum spindle speed: 4,500 rpm Hydraulic chuck diameter: 210 mm Tailstock quill diameter: 70 mm Tailstock quill stroke: 190 mm Collet chuck Dimensions: 402 x 130 x 199 h cm Weight: 4,500 kg Accessories: various holders and driven holders

Condition: excellent (used), Year of construction: 2007, Fagor CNC lathe Full specifications available in photos Machine in excellent condition Kedpfx Aeym Ef Rjalelp

Condition: good (used), functionality: fully functional, machine/vehicle number: 324, turning length: 525 mm, turning diameter: 160 mm, spindle bore: 52 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 222 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 12 m/min, rapid traverse Z-axis: 15 m/min, total height: 2,000 mm, total length: 4,000 mm, total width: 2,000 mm, quill travel distance: 80 mm, quill diameter: 75 mm, overall weight: 5,000 kg, swing diameter over bed slide: 450 mm, swing diameter over top slide: 300 mm, controller manufacturer: MORI SEIKI, controller model: MORIC-T5F, Equipment: chip conveyor, documentation/manual, MORI SEIKI SL-15 M CNC Lathe - Operating voltage: 380 V - Frequency: 50 Hz - Connection: 20 kVA - Swing diameter over bed: 450 mm - Swing diameter over turret slide: 300 mm - Distance between centers: 595 mm - Standard diameter: 160 mm - Front bearing inner diameter: 90 mm - Number of tools: 12, max. 6 stations for driven tools - Tool shank cross-section: 20 mm - Max. boring bar shank diameter: 32 mm - Driven tool spindle speed: 100 – 2000 rpm - Feed rate on X-axis: 0.00001 to 250 mm/min; Z-axis: 0.00001 to 350 mm/min - Rapid traverse speed X and Z axis: 1260 mm Kledpfx Aoyvq Nuealep - Tailstock travel: 450 mm The machine is equipped with a tailstock, a 12-station tool turret (including the tool holders shown in the photos), and a chip conveyor. Note: This item must be collected between 12.05. and 22.05.2026 on a specific date to be agreed upon. FCA D-74821 Mosbach – loaded onto truck

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 1704 005, spindle bore: 45 mm, total length: 1,850 mm, total width: 1,100 mm, total height: 1,800 mm, spindle speed (max.): 4,000 rpm, overall weight: 2,000 kg, DMG MORI NEF 360 LZ Lead and Feed Screw Lathe - Operating voltage: 400 V - Frequency: 50 Hz - Connection: 10 kVA - Rated current: 25 A - Centre distance: approx. 750 mm - Centre height over bed: 190 mm - Swing over bed: 380 mm - Centre height over cross slide: 120 mm - Swing over cross slide: 240 mm - Spindle bore: approx. 45 mm The machine is equipped with a tailstock, a Multifix tool holder, as well as a HAINBUCH clamping system, diameter: 140 mm, and a two-axis digital readout by DMG MORI. Kledpfx Aaeyvql Nelop Please note: The item must be collected firmly between 12/05 and 22/05/2026 at an exact date to be agreed. FCA D-74821 Mosbach – loaded onto truck

Condition: not inspected (used), functionality: unexamined, turning diameter over cross slide: 160 mm, turning length: 1,000 mm, turning diameter: 315 mm, spindle speed (max.): 3,300 rpm, bar passage: 52 mm, No reserve price – guaranteed sale to the highest bidder!\n\nTECHNICAL DETAILS\n\nTurning diameter: 315 mm\nTurning diameter over cross slide: 160 mm\n\nTurning length: 1,000 mm\n\nSpindle speed range: 30 – 3,300 rpm\n\nSpindle bore: 52 mm\n\nNumber of tool changer positions: 12\n\nMACHINE DETAILS\n\nControl model: Siemens Sinumerik 802 D\n\nMachine weight: approx. 6 t\n\nNote: The machine has been overhauled! Kodpfx Asyv Aucealolp

Condition: used, Year of construction: 2020, turning diameter 380 mm turning length 511 mm control Mazatrol SmoothG turning diameter over slide 276 mm max. swing diameter over bed 675 mm Standard machining diameter 276 mm bar material dia. 65 mm x-axis 234 mm rapid traverse X-axis 30 m/min z-axis 625 mm rapid traverse Z-axis 33 m/min turning speeds 35 - 5000 U/min spindle nose A2-6 spindle bore 76 mm Motor output (40%ED) 26 KW 22 KW Max. Torque 465 Nm turning speeds 6000 U/min Main drive power 11 KW Max. Torque 90 Nm Milling spindle speeds ( driven tools) 35-6000 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40% ED) kW Milling spindle power 3,7 kW Numbers of tools 12 (angetrieben) Tool cross section (outside) 25 qmm Boring bar- Ø 40 mm Drill- Ø 20 mm Mill- Ø 20 mm Tap- Ø M20x2,5 Switching time one turret station ca. 0,20 sec coolant tank 180 l connected load 46,2 kW weight of the machine ca. 5,9 t Ksdpfxjtugggs Aalolp dimensions of the machine ca. 2,7 x 1,9 x 1,9 m incl. the following accessories: - Signal light (3-colour LED), rectangular - High-performance coolant system (1.1 kW) Flow rate max. 17.6 l/min, pressure (at pump) 5 bar. - Additional coolant nozzle main spindle - Preparation for oil mist extraction electrical/mechanical flange 98mm - Preparation for bar feed - Robot interface (Advance/Profibus) - Chip conveyor with low ejection height - Overload monitoring system - Drilling cycle with torque-dependent chip breaking - Preliminary use of a hollow clamping cylinder on counter spindle - Hollow clamping device incl. draw tube + cylinder - Clamping chuck Hainbuch Spanntop Nova Axfix mini size 52 - Chuck Hainbuch Spanntop Nova Axfix special mini size 52 - 2 x collets - Changing device for collet chuck STANDARD ACCESSORIES Automatic on/off and warm-up function Air blowing device on the chuck on the counter spindle Use of linear systems with guide carriage USB connection (1 connection) Set of manuals in electronic form on CD C-axis main spindle Input accuracy 0.0001° Spindle positioning counter spindle without C-axis Input accuracy 0.001° Tool turret with 12 stations VDI, Operator door with locking switch Double foot switch for both main and counter spindle Hydraulic pressure interlock Fully enclosed work area Work area lighting Safety precautions in accordance with global standards High-performance coolant system (520W) Flow rate max. 11.5 l/min. Complete coolant system Automatic opening/closing of the chuck jaws Automatic tool eye Absolute positioning system Preparation for chip conveyor (lateral) Synchronisation of main and counter spindle Synchronised tapping with milling spindle Relocation Detector Mazatrol SmoothG control 19" LCD colour screen (touch screen) User macro (600 variables) EIA/ISO input function Optional stop (optional stop) Tool path check in the background Thread cutting function (G33) Polar coordinate input (EIA) Drawing data direct input function Interface for LAN SD memory card I/F - Second-hand machine without warranty - All dimensions, weights and performance specifications are non-binding

Condition: used, turning diameter max. 360 mm turning length 505 mm control Mazatrol SmoothC max. swing diameter over bed 660 mm swing diameter over slide guides max 255 mm bar material dia. max. 80 mm turning speed range - spindle 35 - 4000 U/min max. torque on the spindle 358 Nm x-axis 225 mm rapid traverse X-axis 30 m/min z-axis 605 mm rapid traverse Z-axis 33 m/min spindle nose A2-8'' spindle bore 91 mm spindle hollow 80 mm Milling spindle speeds ( driven tools) 5000 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40%ED) kW tailstock quill taper MT 5 Travel- tailstock 565 mm Axial pressure max 5000 Nm Tool turret 1 Numbers of tools 12 (angetrieben) turning tool - shaft cross cut 25 x 25 mm tool taper BMT Required air-pressure 5 / 160 bar / l/min voltage 400 V coolant tank 180 l engine output 18,5 (30min Betrieb) kW Rated power (100% continuous operation) 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 3,6 x 2 x 1,8 m Machine incl. the following special accessories: Chip conveyor on the right side Productivity package C - special according to storage machine This package includes: High-performance coolant system (1.1 kW) Flow rate max. 17.6 l/min Preparation for chip conveyor (lateral) Automatic tool eye STANDARD ACCESSORIES Transformer for the European market Use of linear systems with guide carriage SD MEMORY I/F(1P) + USB MEMORY I/F(1P) 1 x USB memory interface (1 slot) Spindle bore 91 mm Set of manuals in electronic form on CD Mazak standard colour CE marking, metric, 50 Hz C-axis input accuracy 0.0001° NC controlled tailstock Tailstock pressure adjustment Tailstock with fixed quill MK5 SAFETY DEVICES Operator door with interlock switch Double foot switch Hydraulic pressure lock Fully enclosed work area Work area lighting Safety precautions according to global standard COOLANT SUPPLY Grundfos coolant pump type MTA (0.25kW / 7.6L/min) Complete coolant system Automatic switch-off via circuit breaker triggering MESSSYSTEM Absolute positioning system NUMERICAL CONTROL Synchronous tapping with milling spindle Relocation Detector Mazatrol SmoothC 10.4’ colour screen User macro (600 variables) EIA/ISO input function Tool path check in the background Thread cutting function (G33) Kljdpfx Aasv Dxw Rjljp Polar coordinate input (EIA) Drawing data direct input function Interface for LAN Various tool holders - All dimensions, weights and performance data are non-binding - Used machine without warranty -

Condition: used, turning diameter 340 mm turning length 575 mm control Mazatrol SmoothEZ max. swing diameter over bed 695 mm Standard machining diameter 235 mm bar material dia. max. 65 mm x-axis 215 mm rapid traverse X-axis 30 m/min y-axis 100 mm rapid traverse Y-axis 10 m/min z-axis 605 mm rapid traverse Z-axis 30 m/min turning speeds 35 - 5000 U/min spindle nose A2-6 spindle bore 76 mm Motor output (40%ED) 15 KW 11 KW Max. Torque 167 Nm turning speeds 35 - 6000 U/min spindle nose A2-5 Motor output (40%ED) ca. 7,5 KW Power (continuous operation) 5,5 KW Max. Torque 53 Nm Milling spindle speeds ( driven tools) 20 - 4500 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40% ED) kW Milling spindle power 3,7 kW Numbers of tools 12 (angetrieben) Tool cross section (outside) 25 qmm Boring bar- Ø 40 mm Drill- Ø 20 mm Mill- Ø 20 mm Tap- Ø M20 coolant tank 225 l Chuck diameter main spindle 8 '' Chuck diameter counter spindle 6 '' w-axis 585 mm rapid travel W 30 m/min c-axis 555 weight of the machine ca. 4,9 t dimensions of the machine ca. 2,8 x 2 x 1,8 m Special accessories: - Chip conveyor, hinged belt, side ejector - Production package, this package includes Preparation for bar feed Automatic parts catcher (Ø:80mm x L:120mm x 2.5 kg) 15 bar high-pressure coolant system Preparation for chip conveyor (lateral) Signal light (3-colour LED), rectangular C-axis counter spindle 0.0001° Automatic tool eye 8" power chuck Kitag. BR08 & Cyl. SR1566C (HD1) GENERAL MACHINE OPTIONS Air blowing device on the chuck (counter spindle) Transformer for the European market Linear roller guides SD MEMORY I/F(1P) + USB MEMORY I/F(1P) 1 x USB - Memory Interface (1 slot) CE marking CE marking, metric, 50 Hz Counter spindle positioning 0.0001 degrees without C-axis Tool turret with 12 stations Y-axis control ADDITIONAL PROCESS SOFTWARE Smooth restart function / restart mode Set of manuals in electronic form on CD Main spindle motor AC 15 kW (20 hp) 2nd spindle motor AC 7.5kW (20 hp) Main spindle motor AC 7.5kW MAIN SPINDLE C-axis main spindle Input accuracy (contour/index) 0.0001° Mazak standard colour (F white(fine)/S black) Automatic switch-off via circuit breaker trip Double foot switch Kjdpjwngklofx Aalolp Hydraulic pressure interlock RFID door interlock Safety foot switch with locking mechanism Safety measures according to worldwide standard Work area lighting Complete coolant system Automatic opening/closing of chuck jaws (main and counter spindle) Feedback of the chuck status (main and counter spindle) Feedback of the chuck status via sensors. 8" power chuck 6" power chuck (counter spindle) Absolute positioning system Synchronous tapping with milling spindle Relocation Detector NC control Mazatrol SmoothEz 15" colour Lcd (touch screen) User macro (common variables: 600 pairs) EIA/ISO package EIA/ISO - input function EIA/ISO - additional functions Bolt line interpolation 3D tool compensation Workpiece coordinate rotation Geometric function Scaling External data input/output Tapping function (G33) Reverse feed rate G93 G37 Tool length measurement Polar coordinate input (EIA) Optional stop Additional workpiece coordinate systems 300 pieces User macro (600 variables) Mazak tapping/drilling cycle EIA/ISO - input function Scaling External data input/output Thr...

Condition: used, Year of construction: 2012, turning diameter 203 mm turning length 300 mm control Mazatrol Smart Distance spindle end - turret 99-434 mm max. turning diameter 280 mm bar material dia. 51 mm Kledpsynbd Eofx Aalep travel -x axis 200 mm travel -z axis 340 mm spindle turning speed range 35 - 6000 U/min rapid traverse X-axis 33 m/min rapid traverse Z-axis 36 m/min spindle bore 61 mm Tool turret 12 -fach turning tool - shaft cross cut 20 Boring bar- Ø 32 mm workpiece weight 150 kg spindle nose A2-5 taper in tailstock-quill MK4 Travel- tailstock 350 mm total power requirement 16,3 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 1,9 x 1,6 x 1,8 m Special accessories: Autom Tool Eye Spindle orientation Signal light Additional coolant nozzles above the chuck Automatic switch-off Interface for bar feed Automatic parts catcher Ø 51 x L:100 x 2.5 kg Workpiece conveyor for automatic parts catcher with workpiece tray Chip conveyor, side ejection Includes: Automatic short bar loading magazine LNS QUICK LOAD SERVO 80_S2 Diameter range: 6 - 80 mm round and hexagonal material Bar lengths: 350 - 1600 mm, however max. headstock length /UVV Weight max. 67 kg / bar Burr-free bars or bar sections Depth 600 mm for holding bars Input voltages from 200 – 460 volts / operating voltage 24 V DC, LNS control programmed on SIEMENS STEP 7 PLC, flexible control panel with large screen, user guidance via symbols for easy operation and adjustment. Device cover with 2 viewing windows made of Plexiglas.

Condition: used, turning diameter over bed 1350 mm turning diameter over slide rest 1020 mm centre distance 6000 mm turning speeds 5-500(x24) U/min spindle passage 120 mm turning dia. in gap 1700 mm total power requirement 27/41 kW Klodpoyuqdnofx Aalsp Power compound 4-jaw chuck, Ø 1.000 mm Steady rest, Ø 500 mm Work rest Rapid tool post Coolant system Rapid traverse 2-Axis Trak D.R.O.

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 7-41 5157 40, The Pittler PCC vertical lathe, serial number 7-41 5157 40, was built in 1999 and corresponds to the PV SL 1/1-1 model. This CNC-controlled vertical lathe is designed for the precise machining of workpieces up to 300 mm in diameter. Technical specifications of the PCC Pittler Max. turning diameter: 300 mm Travel: X-axis 920 mm / Z-axis 250 mm C-axis: available Chuck diameter: 250 mm Spindle speed: 28–7000 rpm Spindle power: 23–29 kW Max. torque: 150–188 Nm Spindle bore: 60 mm Kedpfxswlaqys Aalolp Tool turret: 8 positions Control system: Siemens Sinumerik 840D Coolant and chip conveyor: integrated Machine weight: approx. 6.5 tons Connected load: 54 kVA at 400 V / 50 Hz This machine is designed for automated operation and is particularly suitable for machining small to medium-sized workpieces with high precision. Availability and further information: Several machines of this type, built in 1999, are currently available, including those with the machine numbers 7-41 5157 35 and 7-41 5157 36. These are located in Germany and are in good used condition.

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 06800001511, Used: CNC vertical lathe Manufacturer: DMG/ GILDEMEISTER Model: CTV250 Year of manufacture: 2003 Serial number: 06800001511 Kljdpewzk D Aofx Aaljp

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 101458, Machine Data Sheet General Information Manufacturer: EMAG Machine Type: CNC Vertical Lathe Model: VL5 S Serial No.: 101458 Year of Manufacture: 2008 Technical Data Max. Chuck Diameter: 260 mm Max. Swing Diameter: 260 mm X-Axis Travel: 570 mm X-Axis Working Stroke: 250 mm Z-Axis Travel: 200 mm Conveyor Maximum Permissible Total Weight: 120 kg Conveyor Maximum Diameter: 220 mm Front Spindle Bearing Diameter: 110 mm Main Drive AC Asynchronous Motor Max. Speed: 4,500 (5,000) rpm Drive Power at 100/40% Duty Cycle: 18/27 kW Torque at 100/40% Duty Cycle: 202/303 Nm Number of Tools: 12 pcs. Tool Holder DIN: 69880, Diameter 40 mm, Max. Tool Length 190 mm Chip Conveyor (Hinged Belt Conveyor): Discharge Height 1,250 mm Coolant Tank: 315 liters, 8 bar Klodpfx Aoxtpi Sealep Control: Siemens 840 D Connected Load: 42 kW Voltage: 400V 50Hz Weight: approx. 6,500 kg Required Floor Space: 10 m²

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 1114.3705-24, Used CNC Lathe Make: Boehringer Type: VDF 250Cm Year of Manufacture: 1997 VDF Boehringer 250C The machine has the following features: 1000mm turning length No tailstock Driven tools Special indexing chuck Siemens 840C control system The Boehringer VDF 250Cm is a CNC lathe designed for machining chucked parts. It is characterized by its robust construction and precise machining capabilities. Technical Specifications (Model Year 1997) Working Area: Swing over Bed: 550 mm Swing over Cross Slide: 480 mm X-Axis Travel: 405 mm Z-Axis Travel: 1,099 mm Maximum Turning Length: 1,000 mm (None) Tailstock: Tool Turret: Number of Positions: 12 Tool Holder: VDI 50 DIN 69880 Live Tools: YES Spindle: Spindle Head Size: 8 DIN 55026 Spindle Bore: 103 mm Max. Chuck Diameter: 315 mm Max. Drive Power (50% Duty Cycle): 53 kW Max. Torque: 780 Nm Speed Range: 30–3,000 rpm Feeds: Automatic Feeds: 1–10,000 mm/min Rapid traverse speed: 10 m/min (X and Z axes) Max. feed force: 15 kN Dimensions and weight: Machine dimensions (L × W × H): approx. 5,400 × 3,200 × 2,400 mm Machine weight: approx. 11,000 kg Equipment: Pivoting control panel Hydraulic system from HYDROKRAFT Coolant system with 600 l tank, max. pump pressure 5.5 bar, flow rate 60 l/min, pump power 1.1 kW Chip conveyor with 325 l tank capacity, right-hand discharge 3-jaw power chuck Oil mist extraction Control cabinet with cooling unit and temperature controller from RITTAL Control system: SIEMENS SINUMERIK 840 C Kledpjwlap Aofx Aaljp Variants and Differences There are various variants of the VDF 250 series, such as the VDF 250 CU, which can be equipped with different control systems (e.g., PHILIPS B2T) and technical specifications. Some models feature driven tools and a tailstock, while others are designed as pure chuck-type lathes without a tailstock. Conclusion The Boehringer VDF 250 Cm is a versatile CNC lathe characterized by its stability and precision. With its robust construction and extensive features, it is ideally suited for machining chucked parts in a variety of production environments.