Used Voltage Stabilizers for sale (14,644)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: AL/008514, workpiece height (max.): 60 mm, table width: 1,000 mm, table length: 3,000 mm, empty load weight: 2,800 kg, TECHNICAL DETAILS Working area: 3,000 x 1,000 mm Max. workpiece height: 60 mm Upper Drilling and Milling Unit Electrospindle / vertical pantograph 24 independent vertical spindles 2 independent horizontal spindles with double output for drilling on the X-axis 2 independent horizontal spindles with double output for drilling on the Y-axis Fixed-position disc cutter group X – 2.2 kW Lower Drilling and Milling Unit Electrospindle / vertical pantograph 24 independent vertical spindles 2 independent horizontal spindles with double output for drilling on the X-axis 2 independent horizontal spindles with double output for drilling on the Y-axis Fixed-position disc cutter group X – 2.2 kW 2 panel gripper clamps Manual loading of parts onto the Flotex table Automatic part unloading Automatic lubrication Safety screens EU regulations MACHINE DETAILS Control: PC and Xilog Plus software Weight: 2,800 kg Electrical Data Rated voltage: 400 V Phases: 3+N Iedpfx Aexx Sg Dsg Dsa Rated current: 49 A Frequency: 50 Hz Short-circuit rating: 10 kA

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 291257-100, MACHINE DETAILS Net weight: 23,500 kg / 8,500 kg Hydraulics – Operating pressure: 231 bar Isdpfxoxyizhj Ag Dja Electrical data Motor rated current: 109 A Control voltage: 230 V Frequency: 50 Hz

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 970 mm, table load: 1,200 kg, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 900 mm Travel Y-axis: 800 mm Travel Z-axis: 970 mm Spindle speed: 12,000 rpm Distance between spindle center and table top: 100 – 900 mm Distance between spindle head and pallet center: 70 – 1,040 mm Spindle taper: HSK 100 Table size: 630 x 630 mm Table load capacity: 1,200 kg Max. workpiece diameter: 1,000 mm Max. workpiece height: 1,300 mm Tool changer: 90 positions Minimum increment: 0.001 mm Creep feed: 1 – 4,000 mm/min (23 steps) Cutting feed: 1 – 50,000 mm/min Rapid traverse: 50,000 mm/min Pallet change time: 17 s MACHINE DETAILS Electrical data Operating voltage: 400 V, 3-phase, 50 Hz Total current: 98 A Incoming cable cross-section: 35 mm² Main fuse: 100 A Note: 2 trucks are required for transport. Isdpfxoxyiirs Ag Doa

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, clamping force: 1,300 kN, screw diameter: 55 mm, displacement volume: 510 cm³, injection pressure: 1,650 bar, ejector force: 61,000 N, Injection moulding machine, function-tested and immediately ready for operation by an Engel specialist technician! Inspection with dry run possible at any time. TECHNICAL DETAILS Clamping force: 1,300 kN Screw diameter: 55 mm Shot volume: 510 cm³ Injection pressure: 1,650 bar Ejector force: 61,000 N Ejector stroke: 150 mm Platen length: 750 mm Platen width: 750 mm Opening stroke: 600 mm Screw length: 20 l/d Minimum mould installation height: 300 mm Maximum platen distance: 900 mm Daylight: 900 mm MACHINE DETAILS Control system: CC200 Power supply type: Three-phase current Input frequency: 50 Hz Input voltage: 400 V Iedjxzfkbspfx Ag Dsa Dimensions & Weight Machine dimensions (L x W x H): 5.8 m x 1.7 m x 2.3 m Total weight: 9,500 kg Operating hours: 24,896 h EQUIPMENT Documentation/manual Display language: German CEE socket 16A Hydraulic core pull 1x Water manifold Levelling elements EUROMAP 67 interface Interface for ejector plate monitoring Schuko socket 10A Mould heating 8x Note: The machine is sold without material hopper and safety guarding.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 109, briquette diameter: 80 mm, overall weight: 1,450 kg, TECHNICAL DETAILS Briquette type Briquette diameter: 80 mm Motor power: 11 kW Production output: 80 - 210 kg/h Machine performance Cycles per minute: 7 Number of cylinders: 3 Max. discharge length: 70 mm Container Ring diameter: 1,200 mm Container capacity: 1 m³ MACHINE DETAILS Dimensions and Weight Dimensions (L x W x H): 2,100 x 1,350 x 1,600 mm Weight: 1,450 kg Electrical Data Supply voltage: 400 V Frequency: 50 Hz Max. material moisture: 15 % EQUIPMENT Hydraulic oil machine Monoblock clamping system Capacitive sensor for automatic operation Viewing window End-of-cycle system Electronic pressure gauges for pump and clamping pressure Siemens touchscreen PLC Siemens display Operating hours counter Inductive limit switches LED machine position indicator Stamping unit Preheating system Oil level and temperature sensor Preparation for oil cooling in tank and material outlet Power stabilizer Iodpfx Agsxyi Ihe Dja Service tools

Condition: excellent (used), Year of construction: 2005, operating hours: 4,900 h, functionality: fully functional, turning length: 730 mm, turning diameter: 545 mm, spindle motor power: 11,000 W, spindle speed (max.): 12,000 rpm, travel distance X-axis: 410 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 570 mm, rotational speed (max.): 12,000 rpm, type of input current: three-phase, feed length X-axis: 410 mm, feed length Y-axis: 140 mm, feed length Z-axis: 570 mm, total height: 3,100 mm, total length: 5,180 mm, total width: 2,550 mm, spindle nose: A6, overall weight: 9,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, 2005 Mazak Integrex 100-III S CNC Mill-Turn Lathe – Fully Equipped with Automation – Low Hours🔹 Make: Mazak Model: Integrex 100-III S Machine Type: CNC Mill-Turn Lathe with Automation Year: 2005 Control: Mazatrol 640MT Pro Production Hours: 4869hrs Condition: Very Good We are pleased to offer this 2005 Mazak Integrex 100-III S, a high-precision CNC mill-turn center built for multi-tasking performance. Fitted with the powerful Mazatrol 640MT Pro control and only 4869 production hours, this machine delivers versatility, speed, and accuracy with minimal wear. Ideal for complex part machining, this machine features main and sub spindles, B-axis milling head, and a GL50F gantry loader for automated part handling, increasing your throughput without sacrificing precision. 🔧 Key Specifications: Max Turning Diameter: 545mm Max Machining Diameter: 350mm Max Turning Length: 730mm Bar Capacity: 52mm Main & Sub Spindle Power: 11kW each Main/Sub Spindle Speed: 6000rpm Ijdexyy Ixjpfx Ag Dja C-Axis Resolution: 0.001° indexing Milling Spindle: 5.5kW / 12000rpm B Axis Range: 225° Tool Changer: 40 ATC stations Tool Capacity: 4kg, 200mm length, 90mm diameter Control: Mazatrol 640MT Pro Tool Taper: KM63 🧰 Machine Travels: X1: 410 mm | Y1: 140 mm | Z1: 570 mm X2: 220 mm | Z2: 780 mm W-Axis: 790 mm ⚙️ Included Equipment: GL50F Gantry Loader with infeed/outfeed conveyors Automatic door for improved workflow Selection of tool holders FSE Swarf Conveyor OMF 1000 Filter System FSE Coolant Filtration & Sump Pump Chiller unit for thermal stability 📐 Footprint & Weight: Dimensions (excluding gantry): 2600 x 2200 x 2500mm Weight: 7,600kg 🚀 Why Choose This Mazak Integrex 100-III S? Low hours – only 4869 hours of production Fully automated with gantry loader Clean, well-maintained, and in very good condition High-end specs for multi-process machining Ready to go – excellent choice for job shops or high-mix/low-volume manufacturers *Specifications are given in good faith but not guaranteed* Mazak Integrex 100-III S for sale Used Mazak CNC lathe CNC mill-turn lathe with gantry loader Mazak Integrex Irish dealer Mazak 100-III S specifications CNC turning center with automation Used CNC lathe 2005 Mazak Mazatrol 640MT Pro machine CNC lathe with sub spindle Mill-turn lathe with B-axis

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 0-250-12-2554, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 80 mm, TECHNICAL DETAILS Minimum part dimensions (X, Y, Z): 250 mm x 100 mm x 8 mm Maximum workpiece dimensions (X, Y, Z): 3,000 mm x 1,000 mm x 80 mm Upper vertical working head Number of vertical electrospindles: 1 Iedpfoxx R Slsx Ag Dja Vertical electrospindle power: 6 kW Grooving saw (90° to the X-Y axis), diameter: 125 mm Number of vertical drill spindles: 32 Vertical drill spindle power: 2.7 kW Number of horizontal drill spindles: 10 (8 in X + 2 in Y) Lower vertical working head Number of vertical electrospindles: 1 Vertical electrospindle power: 6 kW Grooving saw (90° to the X-Y axis), diameter: 125 mm Number of vertical drill spindles: 32 Vertical drill spindle power: 2.7 kW Number of horizontal drill spindles: 10 (8 in X + 2 in Y) MACHINE DETAILS CNC control: PC 85 Software: woodWOP 6 Electrical data Voltage: 380 V Frequency: 60 Hz Phases: 3 Power: 62 kW Current: 125 A Control voltage: 24 V EQUIPMENT Simultaneous processing of two panels Safety enclosure for the working head No. 2 clamps for fixing and moving the workpiece Loading station with air cushion Discharge of panel(s) via motorized roller conveyor Safety system with perimeter fencing and front safety mats

Condition: excellent (used), Year of construction: 2019, Ref: 11037 . 2019 SCS Automaberg 2 HCR Semi-automatic 2 head cover corner rounding unit Iodpexx Uv Usfx Ag Dja Features: Sturdily built, easy adjustable Perfect for small and medium production Quick and Easy Makeready Easily Moveable Reduced Floor Space Process: Covers are insert manually into the corner rounding station In two passes, the machine allows the perfect rounding of all 4 corners Equipped with heating system which softens the glue before rounding Corner pressure time can be adjusted easily on the display. Specification: Open Cover Size: Max 600 x 570 mm / Min: 143 x 92 mm Cover corner rounding radii: 4mm - 15mm Voltage: 230 V / 1 ph / 50 Hz Power: 0,5 kW Compressed Air: 0,5 ltr/cycle at 6 bar Weight: 200 kg Dimensions (L x W x H) 1.420 x 1.110 x 1.560 mm

Condition: used, Very handy and ergonomic, easy to use stroboscope with high lighting intensity (up to approx. 50 cm distance) and low energy consumption. Design with plug-in exchangeable battery pack. High frequency stability and easy adjustment with frequency doubler and splitter. Phase shift + / - 6° for observing different positions. Sensor input for external trigger. SELLERS NOTICE: If you have a competing quote for the item, we will always try to beat it. Items are ‘sold as seen’. ID: FFNL016 Listing name: ALLURIS SMS 400 StroboVision Stroboscope Isdpfexzh Upjx Ag Doa

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, clamping force: 1,100 kN, screw diameter: 40 mm, clearance between the columns: 470 mm, displacement volume: 217 cm³, injection pressure: 2,377 bar, The machine has been partially refurbished and is ready for immediate use! Iodpfexzfg Nex Ag Dea The clamping side has been completely refitted with new seals and two almost new tie bars have been installed! TECHNICAL DETAILS Clamping force: 1,100 kN Screw diameter: 40 mm Distance between columns: 470 mm Shot volume: 217 cm³ Ejector force: 22,000 N Ejector stroke: 150 mm Clear opening: 900 mm Injection pressure: 2,377 bar Opening stroke: 600 mm Platen length: 770 mm Platen width: 745 mm Minimum mould height: 300 mm Maximum daylight: 900 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,400 x 1,500 x 2,120 mm Total weight: 6,000 kg Power supply type: Three-phase current Input frequency: 50 Hz Input voltage: 400 V EQUIPMENT Documentation / manual Display language: German CEE socket 16 A CEE socket 32 A Hydraulic core pull 2x Air valve, movable WAP Levelling elements EUROMAP 12 interface Schuko socket 10 A Note: The machine is sold without a material hopper and water battery.

Condition: used, Little used 11.6 MW Condensing Steam Turbine Generator, TGM Kanis Turbinen GmbH, 2017 Reported to have less than 100 operating hours due to project cancellation. Includes turbine, synchronous generator, auxiliaries, and controls. Turbine Manufacturer: TGM Kanis Turbinen (Germany) Type: CT32-54 Condensing Steam Turbine Year: 2017 Live Steam Conditions: 43 bar @ 398 °C Exhaust Conditions: 0.064 bar @ 38 °C Power Output: Max continuous 11,615 kW Ijdpfx Agjxvq Nrs Doa Speed: 7,200 rpm Generator Manufacturer: Elin Motoren Type: HTM290E04, synchronous generator Rating: 14,631 kVA Voltage: 11,000 V Current: 768 A Frequency: 50 Hz Enclosure: IP54 Weight: 30,600 kg Year: 2017 Auxiliaries Voith Turbo I/P Converter Type: DSG-B07143 Supply voltage: +24 VDC Input pressure: 8 bar Output pressure: 2–5 bar Sirocco Cooling System Type: 2x16 KDL-E-50-2-1850-2-1.8 Motor power: 253 kW Air flow: 29,664 m³/h (65/35 °C, 2x0.065 kPa) Water flow: 2×25 m³/h (25/29 °C, 10 kPa) Pressure: 10–15 bar Controls Turbine control system included. Turbine was intended to be fed by boiler (not included in sale) with steam production capacity of 52570 kg/hour.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, overall weight: 600 kg, total length: 1,460 mm, total width: 800 mm, total height: 1,530 mm, power: 18.5 kW (25.15 HP), fuel type: electric, volume flow: 3 m³/h, operating pressure: 10 bar, pressure (max.): 10 bar, noise level: 68 dB, type of cooling: air, Equipment: refrigerant dryer, type plate available, 2019 Kaeser ASK 34 T Sigma Compressor with 2001 OKS 500L Air Receiver Machine Type: 11 Bar Air Compressor with 500L Air Receiver Year: 2019 Condition: Very Good Efficient, Quiet, and Reliable – Complete Compressed Air Solution For sale: 2019 Kaeser ASK 34 T Sigma Rotary Screw Compressor, complete with 2001 OKS 500L air receiver, in very good condition. This compact, high-efficiency system is engineered for continuous-duty operation with minimal maintenance, ideal for workshops, manufacturing plants, and industrial users. The “T” version includes a built-in refrigerated air dryer, providing clean, dry compressed air in a single, integrated unit. ⚙️ Technical Specifications – Kaeser ASK 34 T Sigma Model: Kaeser ASK 34 T Sigma Year: 2019 Type: Rotary Screw Compressor with Integrated Refrigeration Dryer Drive Motor Power: 18.5 kW (25 HP) Operating Pressure: 10 bar Max Working Pressure: 11 bar Free Air Delivery (FAD): up to 3.0 m³/min Cooling Type: Air-cooled with integrated aftercooler Integrated Dryer: Yes – built-in refrigerated dryer for moisture-free air Noise Level: Approx. 68 dB(A) Control System: SIGMA CONTROL 2 – advanced PLC with diagnostics and remote connectivity Voltage: 400 V / 50 Hz, 3-phase Tank Included: OKS 500L air receiver (CE certified, 2001) Condition: Very good Dimensions (L x W x H): approx. 1460× 800 × 1,530 mm Weight: approx. 600 kg (compressor only) 🌟 Key Features and Benefits Integrated “T” Model Dryer – supplies clean, dry compressed air directly, no external dryer needed. Energy-Efficient Sigma Profile Airend – Kaeser’s patented rotor design delivers more air with less power. Quiet Operation – low-noise cabinet (≈68 dB) suitable for workshop or factory floor use. Advanced SIGMA CONTROL 2 System – PLC touch interface with smart diagnostics, load/unload management, and maintenance alerts. Compact and Reliable – small footprint, robust construction, and minimal service requirements. Complete System – includes 500L OKS receiver tank for stable pressure and storage. German Quality Engineering – designed for long service life, consistent performance, and easy operation. 🧰 Applications Furniture and joinery workshops CNC and machining operations Manufacturing plants and assembly lines Automotive, spray booths, and fabrication facilities Industrial air supply for tools and equipment Ijdoxyt Thjpfx Ag Dja Why Choose This Kaeser ASK 34 T System Premium German-built rotary screw compressor with integrated dryer. Very good condition. Includes 2001 OKS 500L air receiver – ready-to-use package. Compact, quiet, and energy-efficient – ideal for professional environments. Immediate viewing available by prior appointment Kaeser ASK 34 T Sigma for sale 2019 Kaeser air compressor Used Kaeser ASK 34 T compressor Kaeser ASK 34 Sigma Control 2 Rotary screw compressor with dryer Kaeser ASK 34 specifications Kaeser used compressors Ireland OKS 500L air receiver for sale Industrial air compressor system Energy-efficient Kaeser compressor Kaeser ASK 34 T Ireland Used Machine Tools Ireland compressors

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 94464, travel distance X-axis: 3,400 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 155 mm, TECHNICAL DETAILS Travel range X-axis: 3,400 mm Travel range Y-axis: 1,300 mm Travel range Z-axis: 155 mm Number of work zones: 2 Drilling Head Vertical spindles X-axis: 10 Vertical spindles Y-axis: 12 Horizontal spindles X-axis: 6 Horizontal spindles Y-axis: 2 MACHINE DETAILS Electrical Data Power: 20 kW Voltage: 380 V Current: 25 A Frequency: 50 Hz EQUIPMENT Vertical electrospindle with C-axis vector, automatic tool changer, ISO 30 taper Automatic tool change system with 3 side-mounted positions for aggregates Automatic tool change system with 20 positions and chain Ijdpsxx Rz Tefx Ag Doa 8 manually adjustable bars for suction cup holders with display 3 manually adjustable suction cups per bar 8 pneumatically actuated Bakelite bars for panel lifting Perimeter safety fence Motorized conveyor belt for chip extraction Vacuum pump

Condition: used, Year of construction: 2015, A very high quality German designed and built spindle moulder from leading manufacturer Martin. The machine although compact in design has a number of premium features as standard including the heavy composite frame to ensure maximum stability along with the 5.7" TFT colour touch screen control unit. This is positioned economically at eye level and helps reduce set up times markedly. From this unit the operator can easily set the required height of the spindLE. In addition the tool data memory gives the facility to store up to 500 different tools, automatically recalling the spindle height position, speed and other program data for the particular tool selected. Other standard features include a precision fence assembly, with hand wheel adjustment and digital display in the control unit, electronic soft braking device for the spindle motor and 'Dornfix' quick shaft change system Specification Iodpfxsxx Upnj Ag Dja - Heavy duty basement for maximum stability and precise machining. - Precision ground cast iron table. - Overhead user friendly graphic colour touch screen control unit. - Heavy duty fence assembly with precision movement - movement by hand wheel - 1 off 11/4" dia spindle shaft (140mm working length) - SK40 'Dornfix' quick change system. - 7.5hp motor - 3000,4500,6000,8000 and 10,000 spindle rpm. - Centralised lubrication. Complete with following options: - Table extensions to both sides giving overall length of 2200mm with extendable workpiece support bar 3000mm overall length. - Integral fence plates - Digital display of fence plate right on control screen with adjustment by handwheel (instead of just normal scale rule). - Cast iron console for feed support - Comfort feed support arm with quick rise / fall by handwheel with mechanical display of height position. Heavy duty cast iron brackets and large steel clamping levers to ensure feed unit is securely locked in required position. - Feed unit variomatic 3 roller with variable mechanical feed speeds of 3 to 17m/min. On / off buttons for the feed unit integrated in to the control panel. - Centrex cutter guard in Lieu of standard CPS guard.

Condition: used, This listing is for a CS Cleaver Scientific LTD The Cube Dry Bath - 01 TCDB----- Cleaver Scientific TCDB – The Cube Dry Bath The Cleaver Scientific TCDB, known as "The Cube Dry Bath", is a compact, digitally controlled dry bath incubator designed for accurate and efficient sample heating in laboratory environments. It is ideal for a variety of applications, including enzyme reactions, nucleic acid denaturation, and other temperature-sensitive protocols. ----- Technical Details Condition: The TCDB is in excellent working condition with minimal use. Specifications: Model: Cube Dry Bath Incubator (Single Block Unit – Block Not Included) Voltage: 240V (unit spec), also listed as 110V, 50–60 Hz – please verify power compatibility Temperature Range: 5°C above ambient to 150°C Temperature Stability: ±0.2°C Temperature Uniformity: ±0.2°C Incremental Control: 0.1°C Timer: Up to 99 hr : 59 min, with continuous operation option Heated Power: 125W Controller: Digital Microprocessor Controller Weight: Approx. 2.1 kg Iodpfoxzh Shsx Ag Dja Block Material: Molded Aluminum Alloy Block Dimensions: 79 x 104 x 50 mm Display: Dual LCD (temperature & time shown simultaneously) Safety Features: Leak-proof chamber, over-temperature protection, SSR fault detection Includes: Cleaver Scientific TCDB Cube Dry Bath Power Cord ----- Applications Ideal for use in: Restriction enzyme digestion DNA denaturation Coagulation studies Melting agar Hybridization procedures Hot Start PCR® BUN (Blood Urea Nitrogen) assays Incubation with water (mini water bath functionality)

Condition: ready for operation (used), Year of construction: 2010, operating hours: 54,872 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 55 mm, clearance between the columns: 630 mm, displacement volume: 570 cm³, injection pressure: 2,387 bar, TECHNICAL DETAILS Clamping force: 2,500 kN Injection pressure: 2,387 bar Screw diameter: 55 mm Tie bar spacing: 630 mm Shot volume: 570 cm³ Ejector force: 58,000 N Ejector stroke: 200 mm Opening stroke: 820 mm Mold size H x V: 630 x 630 mm Platen size H x V: 995 x 1,050 mm Minimum mold height: 330 mm Maximum daylight: 1,150 mm MACHINE DETAILS Control system: MC5 Dimensions & Weight Dimensions (L x W x H): 6,500 x 2,200 x 2,300 mm Total weight: 15,000 kg Input frequency: 50 Hz Input voltage: 400 V Operating hours: 54,872 h EQUIPMENT Documentation/manual 2x temperature control units for hot runner Screen text: German CEE socket 16A Accumulator for increased injection performance + ejector or core pull parallel operation Hydraulic core pull 1x Air valve 4x Material hopper Water manifold Leveling elements EUROMAP 12 interface Iedpfx Aexzd R Tog Dea EUROMAP 67 interface USB interface Schuko socket 10A Wear-resistant plasticizing unit Note: Machine is sold without handling unit.

Condition: good (used), REF: MM6180 Available as a single lot comprising of 2x Tom Chandley Ltd Ovens and 1x Newsmith Stainless Ltd – Industrial Bread Pan Washer. Technical specification ⚙️ Tom Chandley Ltd – Electric 3-Deck Oven ✅ Model: Compac (3-deck, 2 x trays per deck) Iodpfx Agjw Rn Eus Doa ✅ Serial No: 3669 ✅ Voltage: 250V ✅ Power: 5.3 kW per phase (x3 phases) ✅ Date Code: 1979 (possibly - date code is 3.2.6.79.) 🗒️ Notes: Stainless steel construction, manual dial controls, single stack on stand with castors. Tom Chandley Ltd – CP MK4 4-8-8 Electric 4-Deck Oven ✅ Model Ref: CP MK4 4-8-8 (4 x decks, 8 x trays per deck) ✅ Serial No: 8293 ✅ Date of Manufacture: January 1998 ✅ Voltage: 400/230V ✅ Phases: 3-phase, 50Hz ✅ Total Load: 61.84 kW ✅ Max Amps/Phase: 90.95A ✅ Largest Single Load: 23.73A 🗒️Notes: 4 decks with 8 trays per deck (32 trays total). Stainless steel, individual deck controls, heavy-duty commercial bakery use. Newsmith Stainless Ltd – Industrial Bread Pan Washer ✅ Serial No: KM 765 ✅ Manufacturer: Newsmith Stainless Ltd. ✅ Stainless steel construction. ✅ Front-loading with internal rack system for bread pans or trays. ✅ CE marked 🗒️Notes: Requires detergents approved by Newsmith Stainless Ltd to maintain warranty ❗Important: These machines are in the Republic of Ireland and subject to European import/export regulations. Responsibility for collecting/shipping these machines will be with the buyer.

Condition: excellent (used), Year of construction: 2022, operating hours: 2,400 h, functionality: fully functional, overall weight: 845 kg, total length: 1,770 mm, total width: 900 mm, total height: 1,530 mm, power: 30 kW (40.79 HP), fuel type: electric, volume flow: 5.9 m³/h, operating pressure: 11 bar, pressure (max.): 11 bar, noise level: 69 dB, type of cooling: air, Equipment: refrigerant dryer, type plate available, 2022 Kaeser ASD 60 T Sigma Air Compressor with Cordivari 900L Air Receiver Machine Type: 11 Bar Air Compressor with 900L Air Receiver Year: 2022 Run Hours: 2400 hrs Condition: Very Good German Precision, Energy Efficiency & Low Hours – Complete Air System For sale: 2022 Kaeser ASD 60 T Sigma Rotary Screw Compressor complete with a Cordivari 900L air receiver tank, in excellent condition with only 2,400 running hours. Engineered and built in Germany, Kaeser’s ASD series compressors are globally recognised for energy efficiency, durability, and quiet operation. Ijdpfsxyt Swex Ag Dja This machine is perfect for workshops, production plants, and industrial environments that require reliable, continuous compressed air supply with minimal maintenance. ⚙️ Technical Specifications – Kaeser ASD 60 T Sigma Model: Kaeser ASD 60 T Sigma Year: 2022 Type: Rotary Screw Air Compressor with Integrated Refrigeration Dryer Drive Motor Power: 30 kW (40 HP) Operating Pressure: 7.5 – 11 bar (configurable) Free Air Delivery (FAD): Up to 5.9 m³/min (at 7.5 bar) Cooling Type: Air-cooled, integrated aftercooler Integrated Dryer: Yes – Kaeser “T” version with built-in refrigeration dryer Noise Level: Approx. 69 dB(A) Control System: SIGMA CONTROL 2 (advanced PLC-based management and diagnostics) Voltage: 400 V / 50 Hz, 3-phase Tank Included: Cordivari 900L air receiver (CE certified) Run Hours: Only 2,400 hours Dimensions (L × W × H): approx. 1,770 × 900 × 1,530 mm Weight: approx. 845 kg (compressor) Condition: Very Good – low hours, ready to work 🌟 Key Features and Advantages Extremely Low Hours – only 2,400 hours of use since new. Integrated Dryer – ensures consistently dry, clean compressed air for downstream machinery. Energy Efficient Sigma Profile Airend – reduces power consumption by up to 15% compared to conventional systems. SIGMA CONTROL 2 System – provides real-time monitoring, automatic load/unload cycles, and service interval alerts. Low Noise Operation (≈69 dB) – ideal for indoor workshop environments. Complete System – includes Cordivari 900L air receiver for stable pressure and reserve capacity. German Quality Engineering – built for continuous-duty industrial performance and long lifespan. Plug-and-Play Installation – ready for immediate use with minimal setup. 🧰 Applications Joinery and woodworking shops Engineering and fabrication workshops Manufacturing and production lines Automotive and spray finishing facilities General industrial compressed air systems Why Choose This Kaeser ASD 60 T System Top-tier German reliability and efficiency. Very low usage – only 2,400 hours from new (barely run-in). Includes Cordivari 900L receiver – complete, ready-to-use air package. Very Good condition. Available for viewing by prior appointment. Kaeser ASD 60 T Sigma for sale 2022 Kaeser air compressor Kaeser ASD 60 compressor specifications Used Kaeser compressor Ireland Kaeser ASD 60 T Sigma Control 2 Rotary screw compressor with dryer Kaeser compressor with air receiver Cordivari 900L air tank Industrial air compressor for sale Energy-efficient screw compressor Kaeser used compressor low hours Kaeser Sigma profile compressor Ireland Used Machine Tools Ireland compressors

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 35079, travel distance X-axis: 3,060 mm, travel distance Y-axis: 1,140 mm, travel distance Z-axis: 160 mm, empty load weight: 600 kg, TECHNICAL DETAILS Isdpfx Agoxx Rr Es Dea Travel range X-axis: 3,060 mm Travel range Y-axis: 1,140 mm Travel range Z-axis: 160 mm Number of working fields: 2 Drilling head spindles vertical X-axis: 7 Drilling head spindles vertical Y-axis: 6 Drilling head spindles horizontal X-axis: 4 Drilling head spindles horizontal Y-axis: 2 Vacuum pump capacity: 250 m³/h MACHINE DETAILS Weight: 600 kg Number of electrospindles: 1 Electrospindle power: 12 kW Tool changer positions: 10 Taper type: ISO 30 Electrical data Supply voltage: 380 V AC Rated current: 44 A Number of phases: 3 Power: 26.1 kW EQUIPMENT Bar worktable 6 adjustable bars for suction cup support 2 adjustable vacuum suction cups per bar with sealing Independent saw blade group for grooves in X-axis Front photocell guard and safety system Automatic lubrication system Conditioning system for cooling and cleaning the machine control

Condition: used, This listing is for a Cellpath 110-240 Vac Heat block Iedpfx Agoxzh N Ts Dsa The CellPath 110–240 Vac Heat Block is a precision-engineered device designed for controlled temperature applications in the laboratory. With its robust construction and variable voltage capabilities, this heat block ensures consistent and reliable performance, making it ideal for incubation and sample preparation tasks.

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Elgo, controller model: P40T, working width: 3,100 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, stroke rate (min.): 8 1/min, stroke rate (max.): 20 1/min, sheet thickness (max.): 13 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness steel (max.): 13 mm, sheet thickness stainless steel (max.): 8 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 45 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 12,000 kg, total length: 4,000 mm, total width: 2,200 mm, total height: 2,100 mm, number of support arms: 2, Equipment: CE marking, emergency stop, finger protection, foot remote control, safety light barrier, 2021 MVD B13-3100 Guillotine Shears with Elgo P40T Control – Very Good Condition For sale is a 2021 MVD B13-3100 Hydraulic Guillotine Shear, equipped with the advanced Elgo P40T CNC Control. This machine is in very good condition, having been installed in 2021. The MVD B-Series shears are built for precision, productivity, and reliability, offering powerful hydraulic cutting performance with CNC-controlled accuracy. Perfect for fabrication shops, subcontractors, and sheet metal production. Machine Make: MVD Machine Model: B13-3100 Machine Type: Hydraulic Guillotine Machine Capacity: 3m x 13mm Machine Year: 2021 ✅ Key Features 3100 mm cutting length – handles large sheet sizes with ease 13 mm sheet capacity (mild steel) – robust heavy-duty performance Elgo P40T CNC Control – programmable backgauge, stroke, and cutting settings Hydraulic swing beam design – consistent and accurate cutting results CNC backgauge system with motorised adjustment Rugged welded frame for stability and precision Front sheet supports and squaring arm for operator convenience Safety light guards for operator protection Very Good condition – 2021 model, very low hours 📐 Technical Specifications – MVD B13-3100 Guillotine Shears Cutting Length: 3100 mm Capacity (Mild Steel): 13 mm Capacity (Stainless Steel): ~8 mm Backgauge Travel: 1000 mm (CNC controlled) Control: Elgo P40T CNC touchscreen – programmable stroke, backgauge, cutting angle Stroke per Minute: 8–20 (adjustable) Cutting Angle: 0.5°–2.5° adjustable Throat Depth: ~100 mm Main Motor Power: 22 kW Hydraulic System: High-pressure precision hydraulics Dimensions (L×W×H): ~4000 × 2200 × 2100 mm Weight: ~12,000 kg 🌍 Condition Year of Manufacture: 2021 Control: Elgo P40T CNC Model: MVD B13-3100 Iedpfx Agexddzqj Dja Condition: Very Good – lightly used Ready for inspection and immediate delivery 🔑 Summary This 2021 MVD B13-3100 Hydraulic Guillotine Shear with Elgo P40T CNC Control offers 3100 mm cutting length, 13 mm capacity, and CNC accuracy. A modern, reliable, and powerful sheet metal cutting solution ideal for fabrication, subcontracting, and production facilities.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 0-201-09-5124, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,650 mm, working height: 60 mm, TECHNICAL DETAILS X-axis travel: 6,000 mm Y-axis travel: 1,650 mm Y-axis travel (for milling): 1,750 mm Maximum working height for trimming: 60 mm Maximum applicable edge height: 65 mm Minimum inner radius: 30 mm Tool change positions: 18 Aggregate saw blade diameter: 200 mm (max.) MACHINE DETAILS Vertical electrospindle (C-vector axis, automatic tool change, cone type HSK F63): 11 kW Drilling head output: 4 kW Vertical drilling spindles in X-axis: 11 Vertical drilling spindles in Y-axis: 6 Horizontal drilling spindles in X: 6 Electrical Data Voltage: 400 V Current: 39 A Frequency: 50 Hz Current: 50 A Control voltage: 24 V EQUIPMENT Numerical control with WoodWop software Iedpfx Ajxx Nnxog Dsa Adjustable panel support rails for suction cup positioning Pneumatic rods for loading/unloading assistance Adjustable Schmalz-type vacuum suction cups Laser positioning system for suction cups Independent edge-banding unit with 360° rotation Glue pot and premelter for granular EVA adhesive Applicable edge materials in rolls: PVC / ABS 0.4 – 3 mm Rubberized pressure roller + panel preheating lamp Edge trimmer Combined trimming/edge unit Edge holder magazine Chip extraction system with motorized conveyor belt Air conditioning unit for cooling and cleaning of machine control Automatic lubrication system Vacuum pump

Condition: used, This listing is for a Thermo Scientific Heratherm IMH400-S Incubator The unit is in full working condition and is ready for immediate use Iedpfx Ajxzh H Eog Doa Overview The Heratherm IMH400‑S is part of the Heratherm Advanced Protocol Security line of microbiological/laboratory incubators. It is designed for demanding applications where both temperature performance and safety/security of samples are important. The “Security” in its name refers to added features such as a lockable door, alarms, and a high‑temperature decontamination cycle. ----- Key Specifications ParameterValue / RangeNotes / CaveatsInternal Volume / Capacity~ 381 litres (≈ 13.5 cu ft) ThermoBid+2Some listings use “400 L” as a rounded designation +1Internal External Dimensions (W × D × H)~ 778 × 770 × 1,545 mm (30.6 × 30.3 × 60.8 in) Includes casters, housing, etc. +2 Temperature RangeAmbient + 5 °C to 105 °C +3This allows use both for incubation and drying protocols Temperature Stability / Uniformity±0.2 °C (at 37 °C) typical +2ThermoBid+2Some versions report ±0.1 °C stability under ideal conditions Convection / Airflow Mechanical convection; adjustable fan speed (often 10% to 100%) Ensures even temperature distribution; users can tune speed to application needs Decontamination Cycle140 °C decontamination for ~6 hours This is to reduce contaminating microorganisms in the interior without needing to remove all fittings for autoclaving shelves included; up to ~39 positions maximum Shelves are removable; spacing adjustable Power / Electrical~1380 W consumption Common variants: 230 V, 50/60 Hz Weight / Mass~ 144 kg Heavy unit, so needs stable flooring and handling during installation

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: ESA, controller model: S660W, bending force (max.): 175 t, working width: 3,700 mm, stroke length: 210 mm, throat depth: 410 mm, distance between stands: 3,200 mm, operating speed: 10 mm/s, reverse speed: 130 mm/s, number of axes: 4, type of crowning: motor-driven, travel distance X-axis: 750 mm, back gauge adjustment: CNC-controlled, back gauge: 750 mm, overall weight: 9,800 kg, total length: 5,305 mm, total width: 2,430 mm, total height: 2,840 mm, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, Equipment: CE marking, emergency stop, european tool clamping system, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, 2021 MVD A175-3700 Hydraulic Pressbrake with ESA S660W Graphic Control – Very Good Condition For sale is a 2021 MVD A175-3700 Hydraulic CNC Pressbrake, equipped with the advanced ESA S660W Graphic CNC Control. This machine is in very good condition, and is ready for immediate use in production. MVD are globally recognised for their high-precision sheet metal forming machinery, combining durability with operator-friendly CNC controls. The A175-3700 offers exceptional performance for fabricators, subcontractors, and manufacturing companies needing reliable and accurate bending of sheet materials. Isdpfxjxddw Ej Ag Doa Machine Make: MVD Machine Model: A175-3100 Machine Type: CNC Pressbrake Machine Capacity: 3700 x 175T Machine Year: 2021 Machine Control: ESA S660W CNC Graphic Control ✅ Key Features 175-ton hydraulic pressbrake with 3700 mm bending length ESA S660W Graphic CNC Control – intuitive 2D/3D programming, touchscreen interface 4-axis CNC (Y1, Y2, X, R) for flexible production High precision crowning system for consistent bending angle Heavy-duty welded steel frame for stability and long-term accuracy European-style tooling system – quick and easy tool changes Safety light guards for operator protection Excellent condition – 2021 model, lightly used 📐 Technical Specifications – MVD A175-3700 Press Capacity: 175 tonnes Bending Length: 3700 mm Distance Between Frames: 3200 mm Stroke (Ram Travel): 210 mm Daylight Opening: 465 mm Throat Depth: 410 mm Table Width: 90 mm Axis Configuration: Y1, Y2, X, R (4-axis CNC) Control: ESA S660W Graphic CNC – touchscreen with 2D/3D programming Backgauge Travel: 750 mm Approach Speed: 180 mm/s Bending Speed: 10 mm/s Return Speed: 130 mm/s Main Motor Power: 15 kW Machine Dimensions (L×W×H): 5305 × 2430 × 2840 mm Weight: 9,800 kg 🌍 Condition Year of Manufacture: 2021 Control: ESA S660W Graphic CNC Axes: 4-axis (Y1, Y2, X, R) Condition: Very Good Ready for inspection and delivery 🔑 Summary This 2021 MVD A175-3700 Hydraulic CNC Pressbrake with ESA S660W Graphic Control offers 175 tonnes of power, 3700 mm bending capacity, and advanced multi-axis CNC control for accurate and repeatable bending. An ideal choice for workshops and production facilities requiring a reliable, modern, and precise pressbrake.

Year of construction: 2004, condition: used, This listing is for a Hettich Micro 22 R Centrifuge The Mikro 22 and Mikro 22R are small, compact bench-top centrifuges for processing microlitre tubes of 0.2 ml to 2.0 ml, and hematocrit capillaries. The refrigerated Mikro 22R also accomodates cyto suspensions and tubes up to a capacity of 50 ml. The Mikro 22 type centrifuges are used for routine examinations of patients' sera as well as in genetic research, virology, cytology and bacteriology. Capacity, performance and cooling of the Mikro 22R are specifically designed to meet the demands of PCR examinations. Super rapid run-up and run-down times shorten the centrifuging operations significantly without stirring the sediment during deceleration. Features and Advantages of the MIKRO 22 Centrifuges: Programmable: Three complete running programmes can be stored and recalled. Metal housing and metal lid, panelling finished in scratch and impact resistant coating. Centrifuging chamber of stainless steel,easy to clean, for additional safety steel-armoured. Lid with see-through glass for speed control during centrifugation. The inner lid is made of stainless steel. Ergonomic lid rail for safe and convenient locking and opening of the lid. Lid locking and holding device Brushless drive guarantees exceptionally smooth running and speed stability. Listing: Hettich Micro 22 R Centrifuge Iedpfxsxzhtxj Ag Dja