Used Vibratory Compactor for sale (794)

Condition: ready for operation (used), Dixi 60 hydraulic press, manufactured in 2019 Hsdpov Alacefx Abkonu Pressing force: 60 tons Beam dimensions: 120 x 80 x 110 cm Press dimensions: 1900 x 1400 x 2200 mm (height) Press weight: approx. 2430 kg Beam weight: up to 500 kg Oil heating Motor: 7.5 kW

Condition: reconditioned (used), Year of construction: 2023, Special price for a machine with low usage Base machine: €29,990 net Options available at an extra charge: - Cooling unit: €3,995 net - Emulsion tank: €3,990 net The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. The machines are characterized by a robust design that guarantees consistent briquette quality in continuous operation. The pressing process takes place without the addition of binders, solely through hydraulic pressure. The volume of the raw material can be reduced by up to 90%, depending on the material. Throughput: up to a maximum of 70 kg/h (material-dependent), Briquette diameter: Ø 50 mm, Motor: 5.5 kW, 400 volts / 50 Hz / 3-phase, Pump: 40 liters, . Maximum briquette length: 50 mm, Optional briquette length: 40 mm, Silo diameter: 1,000 mm, Oil tank: 110 liters. . Dimensions: 1750x1130x1100 mm (l x w x h) Weight: 950 kg. . Hydraulic pre-compression via slide valve Main press cylinder Vertical cylinder . Level sensor: yes . Hedsd N Dnhspfx Abkenu Requirements for the raw material - Max. chip length: 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Max. weight on the agitator: 150 kg - The feed must be free of magnetic metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 26/2632, power: 180 kW (244.73 HP), input voltage: 380 V, warranty duration: 12 months, Equipment: documentation/manual, 1. Pelletizing press, brand: Paladin 1600-210 Internal diameter of the die: 850 mm Die surface: 210 mm The press is equipped with 2 motors, each with 90 kW and a speed of 1500 rpm. Hnjdsq U R N Tepfx Abkeu The press door is made of stainless steel and has an overload valve. 2. Roll press with 2 rolls on the press, refurbished with a drilled or ribbed design. The press is complete with a die lifting device and tools. New rear plate for the 2 rolls. The press has been completely refurbished and fitted with new bearings and wear parts, such as front and rear sliders, die adjustment ring, etc. Also includes new V-belts and toothed belt. All safety features will be taken into account, and appropriate switches will be installed. Friction protection, door switch, and inspection hatches will be mounted. Refurbished pump unit for friction and V-belt tension. Note: Conditioner on the press is an optional extra.

Condition: used, functionality: fully functional, mileage: 242,162 km, power: 100 kW (135.96 HP), first registration: 12/2015, fuel type: diesel, empty load weight: 2,785 kg, maximum load weight: 715 kg, overall weight: 3,500 kg, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, suspension: steel, loading space volume: 5 m³, Year of construction: 2015, Equipment: ABS, airbag, Small garbage truck: + Renault + Maxity + 242,162 km + First registered: 15.12.2015 + 5-speed manual transmission + 4-cylinder diesel engine, 2488 cc; 136 hp + Electric windows + 3 seats + Radio/CD + Hands-free system + Driver airbag + Rear window + Faun / Provence Benne waste body + Type: Medium G1 M50 TH LC SAD + 5m³ aluminium tipping body Hjdpewzh Hzsfx Abksnu + Compactor + Step board + Amber beacon + 496 cm x 185 cm (L x W) + Unladen weight: 2,785 kg; gross vehicle weight: 3,500 kg + Single owner vehicle Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and omissions excepted, subject to prior sale!

Condition: reconditioned (used), Presto HGS20 20 cubic meter press container for roll-off tipper Reconditioned, inspected, and serviced Large filling opening Divided lid, opening to the left/right Accepts containers on both sides Side-mounted discharge door Ramp operation possible Hnsdpowifn Ssfx Abkou Machines are reconditioned, inspected, serviced, and offered with a new coat of paint in the desired standard RAL color. We will gladly prepare an offer including delivery.

Condition: used, Year of construction: 2010, total width: 2,080 mm, total height: 1,900 mm, total length: 2,440 mm, Colour: Grey Briquette press; Höcker Polytechnik BrikStar C 3-19-L 4.3kW, 400V 25kg/h Funnel volume 3m³ Oil tank 50l Dimensions; 2015x2360x1300mm, 830kg Hodpfsxqdxcjx Abksnu - Year: 2010 - Documentation available: Yes - CE certificate present: No - Transport dimensions: 2440mm x 2080mm x 1900mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 1996, filling capacity 400 Liter Usable Volume 300 Liter filling amount max. 850 kg workpiece sizes max. 850 x 200 mm Individual weight of workpiece max. 30 kg turning speeds 4.0 - 15.0 U/min Inner drum width 925 mm drive motor 380 V weight of the machine ca. 1950 kg. range L-W-H 3100 x 1600 x 2000 mm good / well-maintained condition (!!) - in checked conditions - machinevideo - ?v=xxnCddCmXe4 Description: - LIMA cleaning machines * for long concrete formwork parts, formwork clamps * for flame-cutting parts, plasma-cutting parts, laser-cutting parts * for punching and sawing parts - environmentally friendly, cost-saving, low-noise - drive with 5-fold V-belt via worm gear - maintenance-free spherical roller bearings - entire machine is highly soundproofed - dust extraction installed as standard - drum running time adjustable - speeds variably adjustable - the drum can be moved into any position using jog mode - space-saving thanks to compact design - extraction system built into the machine - single-lever drum quick release - machine bearings on vibration dampers - spacious unloading area, suitable for Euro standard containers - free access for forklifts or pallet trucks Working method: - the parts to be processed are moved by their own friction . deburred, descaled and derusted. Hnodjzcqzijpfx Abkeu - the closed design reduces the noise generated during deburring . to just 68 - 72 dB(A). - a direct-acting dust extraction system automatically removes . the dust generated during processing. - the machine can also process oily punched and sawn parts. - during this processing, additional sawdust is added to the drum. - a time delay switch switches the dust extraction system on individually. - the parts are thus deoiled and dried first. - only after this process does the dust extraction system switch on . automatically to suck the sawdust out of the drum. - by specifying the drum speed, optimal processing is guaranteed. - the LIMA-400 L deburring machine can be set up anywhere, . provided there is a solid surface/foundation. - after the work is complete, the drum remains in the position. . so that the drum flap can be opened quickly. - one work cycle takes about 20 minutes.

Condition: good (used), Year of construction: 2013, Vibratory finishing machine, vibratory finishing system, vibratory finishing machine, vibratory finishing rotary vibrator, vibratory finishing system, continuous vibrator, vibratory conveyor, vibratory feeder, conveyor trough, spiral conveyor -Round vibrator: with soundproof hood and spray device -Manufacturer: KAYAKOCVIB, Round vibrator type KVM 600 -Work container: elastically mounted -Total volume: 600 liters Hnsdpezhxdujfx Abkju -Outer diameter: 1360 mm -Work basin width: 430 mm -Work basin height: 570 mm -Accessories: Soundproof hood, spray device, speed controlled, pneumatic separator flap -Machine for: Deburring, polishing, edge rounding -Machine dimensions: 1650/2230/H1330 mm -Dimensions of the control box: 780/1070/H280 mm -Weight: 1395 kg

Condition: used, mileage: 126,802 km, power: 235 kW (319.51 HP), first registration: 06/2015, fuel type: diesel, empty load weight: 15,580 kg, maximum load weight: 10,420 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 3,500 mm, brakes: engine braking, driver cabin: other, gearing type: automatic, emission class: euro6, number of seats: 3, loading space volume: 21 m³, Equipment: ABS, air conditioning, cabin, cruise control, immobilizer system, onboard computer, parking heater, power assisted steering, seat heater, * German vehicle * One previous owner * Condition as shown in photos * Previously owned by a municipal authority * Zoeller complete superstructure * Zoeller Medium X2 E EVO 21 * Schller 1.3 automatic bin lifter * Suitable for all bin sizes from 80 to 1,300 liters * 21 m³ collection body with compactor * Large driver’s cab with 3 seats * Automatic transmission * Air conditioning * Auxiliary heater * Multifunction steering wheel * Cruise control * Electric windows * Rear-view camera monitoring system with display * Hands-free installation * Stereo CD * Bluetooth phone connectivity * Electrically heated mirrors * Electric glass roof * Central lubrication system * Leaf/air suspension with lift/lower function * Steerable and liftable trailing axle * LED work lights * Rotating beacons * Wheelbase: 3.50 m + 1.50 m * Gross vehicle weight: 26,000 kg * Unladen weight: 15,580 kg * Payload: 10,420 kg If a new TÜV inspection is required, we would be pleased to provide a quote from one of our partner workshops. Hsdpfx Ajycw T Sjbkonu Our offer does NOT include a new TÜV inspection, new DGUV, new roadworthiness test (SP), or new safety inspection (UVV). You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and highly recommend viewing and inspecting the goods to avoid any misconceptions regarding their condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All details are provided without guarantee. We do not accept liability for errors or incorrect information in this offer. The buyer is obliged to independently verify the condition and specifications of the goods/vehicles. Subject to prior sale, alterations, and errors.

Condition: used, mileage: 191,953 km, power: 235 kW (319.51 HP), first registration: 03/2014, fuel type: diesel, empty load weight: 15,910 kg, maximum load weight: 10,090 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 3,500 mm, next inspection (TÜV): 04/2026, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro5, number of seats: 4, loading space volume: 21 m³, Equipment: ABS, additional headlights, air conditioning, cabin, cruise control, differential lock, electronic stability program (ESP), immobilizer system, onboard computer, parking heater, parking sensors, power assisted steering, seat heater, soot filter, traction control, * German vehicle * One owner * Condition as shown in photos * Zöller complete superstructure * Zöller Medium X2C 21 * Zöller Delta 2301 Premium lifter * 21 m³ collecting container with compactor * Large cab with 4 seats * Comfort driver's seat, air-suspended with seat heating * Automatic transmission * Air conditioning * Parking heater * Multifunction steering wheel * Cruise control * ABS/ASR/ESP * Hill-start assist * Electric windows * Reversing camera with monitor * Hands-free system * Stereo CD * Bluetooth phone connectivity * Electrically adjustable heated mirrors * Roof hatch * Central lubrication system Hnjdpeyml Swsfx Abksu * Leaf-air suspension with lifting/lowering function * Liftable trailing steering axle * LED worklights * Beacon lights * Wheelbase 3.50 m + 1.50 m * Gross vehicle weight 26,000 kg * Unladen weight 15,910 kg * Payload 10,090 kg If a new TÜV inspection is required, we are happy to provide you with an offer through our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Notice: We offer and strongly recommend viewing and inspecting the vehicle, so the buyer does not have any misconceptions regarding quality and suitability. Viewings and inspections are possible at any time by appointment and are expressly welcome. All information provided without guarantee. No liability is assumed for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and specifications of the vehicle. Subject to changes, prior sale and errors.

Condition: used, mileage: 164,056 km, power: 96 kW (130.52 HP), first registration: 06/2010, fuel type: diesel, empty load weight: 3,220 kg, maximum load weight: 2,280 kg, overall weight: 5,500 kg, axle configuration: 4x2, wheelbase: 2,500 mm, brakes: engine braking, driver cabin: other, gearing type: mechanical, emission class: euro5, number of seats: 3, loading space volume: 3 m³, Equipment: air conditioning, cabin, * German vehicle * 1st owner * Previously owned by a municipal authority * Condition as shown in the photos * Refuse compactor body by premium manufacturer Hagemann & Partner * Model: HG 3.5 L * Side sliding doors for loading * Nominal volume: 3.5 m³ * Driver’s cab with 3 seats * Air conditioning * Electric windows * Rotating beacon * 6-speed manual transmission * Radio CD * Wheelbase: 2.50 m * Gross vehicle weight (GVW): 5,500 kg * Unladen weight: 2,220 kg * Payload: 2,280 kg If a new TÜV inspection is required, we are happy to provide a quote from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, WITHOUT new DGUV certificate, WITHOUT new safety inspection (SP), WITHOUT new accident prevention regulation inspection (UVV). You can find further trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and highly recommend viewing and inspecting the goods, to avoid any misunderstandings regarding their condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All information provided is without guarantee. We do not accept liability for errors or incorrect specifications in this offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to change, prior sale, and errors. Hnjdpfx Abox Urrzjkju

Condition: good (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 13.645, pressing force: 38 t, total width: 2,500 mm, total length: 6,200 mm, total height: 2,500 mm, overall weight: 14,700 kg, type of input current: three-phase, input voltage: 400 V, empty load weight: 4,700 kg, input current: 32 A, year of last overhaul: 2023, Avermann MPC16PE compaction container – fully overhauled in 2023 – double hook connection – drop gate For sale: Avermann MPC16PE compaction container with a capacity of 16 m³. This machine was fully overhauled by us in 2023. During the overhaul, the compaction container was completely inspected technically and subsequently blasted and repainted in RAL 7016 anthracite gray. As a result, the machine is in very good condition both technically and visually. The compaction container has a double hook connection, allowing it to be lifted from both sides. In addition, the machine is equipped with a drop gate, making this model particularly suitable for processing wet waste and other moist waste streams. Due to its robust construction, a load capacity of 10,000 kg, and its practical design, this compaction container is very suitable for, among others, industry, manufacturing companies, the food industry, hospitality, waste processing, and recycling. Technical specifications: Brand: Avermann Type: MPC16PE Machine number: 13,645 Overhaul year: 2023 Capacity: 16 m³ Power supply: 400 V Power: 5.5 kW Fuse: 25 A slow-blow Own weight: approx. 4,700 kg Maximum load weight: 10,000 kg Color: RAL 7016 anthracite gray Double hook connection Equipped with a drop gate Suitable for hooklift transport Very suitable for wet waste / moist waste streams Details: The machine was completely overhauled, blasted, and repainted in 2023. During this process, the compaction container was technically inspected and reassembled in excellent condition. A very neat and well-executed compaction container for companies looking for a professional, overhauled machine without the investment of a new compaction container. Hodpfxez Ephcj Abkenu Inspection and testing are possible by appointment. Please feel free to contact us for more information, prices, or technical questions. Keywords: Wortmann, Avermann, MPC16PE, MPC16, compaction container, 16 m³ compaction container, waste compactor, container compactor, wet waste, drop gate, double hook connection, waste compaction, recycling, compactor, overhauled compaction container.

Condition: used, Year of construction: 2009, Vibratory plate Hedjz Dd R Ajpfx Abksnu ALLU HD1200* Manufacturer: ALLU * Type: HD1200 * Excavator class: approx. 15–30 tons * Weight: approx. 1,170 kg * Plate size: approx. 770 × 1,320 mm * Oil flow rate: approx. 150 l/min * Max. pressure: approx. 210 bar * Frequency: 28–60 Hz * Dynamic impact force: up to approx. 1.5 MN * OilQuick: in this size class, OQ 70/55 is commonly used.

Condition: used, Year of construction: 2010, functionality: unexamined, machine/vehicle number: E16732-1, input current: 63 A, Avermann SSP-80 SIMPLEX stationary screw press | 11 kW | Year of manufacture 2010 For sale: Avermann SSP-80 SIMPLEX stationary screw press, manufactured in 2010. Hedpfxjz Eny Re Abkenu This robust stationary screw press from Avermann is designed for the efficient compaction and transport of various waste and material streams. The powerful screw continuously transports and compacts the material towards the connected container. The machine is heavy-duty and well-built, making it very suitable for professional use in industries such as manufacturing, logistics, recycling, and waste processing. Technical specifications: Brand: Avermann Type: SSP-80 SIMPLEX Year of manufacture: 2010 Serial number: E16732-1 Power supply: 400 V / 50 Hz Power: 11.0 kW Connected load: 63 A Stationary design Powerful screw drive Large feed opening Robust industrial construction Special features: The machine is in good, used condition. The screw and feed side are easily accessible, and the machine is equipped with an integrated electric drive and control system. A screw press has the advantage that the material is continuously fed and compacted. This makes the machine very interesting for companies with larger or constant waste streams that want to significantly reduce the volume. Inspection and testing are possible by appointment. Please feel free to contact us for more information, pricing, or technical questions. Keywords: Avermann, SSP-80, SSP 80, SIMPLEX, screw press, stationary screw press, waste compactor, waste compaction, compactor, recycling, press system, screw compactor, Schneckenverdichter.

Condition: used, Year of construction: 2013, Manufacturer: HSM Type: HL 4010 Li Year of manufacture: 2013 Pressing force: 40 t Hsdpez I Rafefx Abkjnu

Condition: good (used), Year of construction: 2019, functionality: fully functional, Horizontal baling press Dixi 80 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2019 Manufacturer: Dixi Type: Dixi 80 SLD Year of manufacture: 2019 Drive power: 11 kW, 400 V / 21 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Hnjdjz A Tzuspfx Abksu Materials: Paper, cardboard, film Note: The press is in good condition. It has been inspected and tested. A video can be found on our website or YouTube channel. An operating manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without warranty.

Condition: good (used), Year of construction: 2015, functionality: fully functional, Horizontal baling press Dixi 60 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2015 Manufacturer: Dixi Type: Dixi 60 SLD Year of manufacture: 2015 Drive power: 7.5 kW, 400 V / 16.5 A Feed opening: 990 x 1,110 mm (W x L) Pressing force: 60 t Pressing cycle: approx. 47 s Hjdpfoz A T Hdex Abkonu Bale size: 800 x 1,100 x 1,200 mm (W x H x L) Bale weight: approx. 370-410 kg Tying: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine weight: approx. 5,420 kg Materials: Paper, cardboard, film The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. An operating manual is available. Please note: All technical data refer to the manufacturer's specifications. We accept no liability for the information provided or any errors. This offer is non-binding, subject to prior sale, and can be withdrawn at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without warranty.

Condition: good (used), Year of construction: 2000, operating hours: 28,155 h, functionality: fully functional, Channel baling press Paal Konti 200 D, year of manufacture 2000 Technical data: Manufacturer: Paal Hnsdpjz A T Nlsfx Abkou Type: Paal Konti 200 D Year of manufacture: 2000 Operating hours: 28155 Pressing force: 60 t Drive power: 45 kW Total connected load: 60 kW Feed opening: 1020 x 1400 mm Bale dimensions: 750 x 1100 mm, length variable Tying: 4-way automatic Throughput at 35 kg/m³ approx. 9.5 t/h 60 kg/m³ approx. 16.5 t/h 100 kg/m³ approx. 26 t/h Bale weight: 450 to 650 kg Transport dimensions approx. 10123 x 2152 x 2720 mm (L x W x H) Machine weight approx. 15,000 kg Materials: Paper, cardboard, film Note: The press is in good condition and has been inspected and tested. A video can be found on our website or YouTube channel. Complete documentation is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any errors that may occur. The offer is subject to change, prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without warranty.

Condition: good (used), Year of construction: 2013, operating hours: 12,110 h, functionality: fully functional, Channel baling press Paal Konti 325 G, year of manufacture 2013 Hjdpfxoz A T N Ej Abksnu Technical data: Manufacturer Paal Type Konti 325 G Year of manufacture 2013 Operating hours 12,110 Pressing force 100 t Drive power 2 x 55 kW Feed opening 1020 x 1750 mm Bale dimensions 750 x 1100 mm, length variable Tying 5-fold automatic Throughput at 35 kg/m³ approx. 13.5 t/h 60 kg/m³ approx. 21.5 t/h 100 kg/m³ approx. 33 t/h Bale weight up to 800 kg Transport dimensions approx. 12216 x 2530 x 2800 mm (L x W x H) Machine weight approx. 28,000 kg Materials: Paper, cardboard, light waste, plastic waste Note: The press is in good condition and has been inspected and tested by us. A video can be found on our website or YouTube channel. The complete documentation is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: good (used), Year of construction: 2015, operating hours: 1,932 h, functionality: fully functional, Horizontal baling press Presto CC 50 M, year of manufacture 2015, with lifting and tilting device, semi-automatic. Technical data: Manufacturer: Presto Type: CC 50 M Year of manufacture: 2015 Operating hours: 1932 Pressing force: 50 t Cycle time: 52 s Drive power: 7.5 kW Feed opening: 1030 x 1100 mm Feed volume: 0.85 m³ Tying: 3-fold, wire, manual Throughput capacity at bulk density of: 35 kg/m³ - 1.3 t 60 kg/m³ - 1.7 t 100 kg/m³ - 2.2 t Bale dimensions: 750 x 1100 mm Bale weight: 300 kg Dimensions: 4705 x 1680 x 2540 mm (L x W x H) Hnsdpfx Abez A T Tqokou Machine weight: approx. 4000 kg Materials: Paper, cardboard, film Note: The machine is in good condition. It has been inspected and tested by us in 28816 Stuhr. The video can be found on our website or our YouTube channel. The operating manual is available in German. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without warranty.

Condition: used, BRAMIDAN, type: B30 W, two-hand operation, filling capacity 2 m³, pressing force 30 t, automatic bale discharge Hnjdpezzxlrefx Abkju +++ The machine is part of an online open auction +++

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 21239, pressing force: 38 t, overall weight: 15,000 kg, type of input current: three-phase, input voltage: 400 V, empty load weight: 5,580 kg, input frequency: 50 Hz, input current: 32 A, operating pressure: 200 bar, oil tank capacity: 80 l, Equipment: documentation/manual, Avermann AVOS MPC 20 + HKV – 20 m³ | Tilting mechanism 240/660/1100 L | Cable & hook attachment | Discharge flap For sale: Avermann AVOS MPC 20 P/A/L/R + HKV compaction container, built in 2016, with a capacity of 20 m³. This robust Avermann compaction container is equipped with an integrated hydraulic lifting and tilting mechanism, making it particularly suitable for locations where roll-on-roll-off containers need to be emptied directly into the container. The tilting mechanism features a hydraulic comb attachment for 240-liter containers and a DIN attachment for 660- and 1,100-liter roll-on-roll-off containers with a flat lid. This makes the machine versatile and suitable for various types of waste containers. In addition, the compaction container is suitable for both cable and hook attachments. At the rear, the machine is equipped with a discharge flap instead of a traditional discharge door, making this version particularly interesting for certain waste streams and applications. Technical specifications: Brand: Avermann Type: AVOS MPC 20 P/A/L/R + HKV Year of construction: 2016 Serial number: 21239 Capacity: 20 m³ Power supply: 3 x 400 V + N + PE, 50 Hz Power: 5.5 kW Hnedpoz Ergzofx Abksu Fuse rating: 25 A Protection class: IP55 Maximum working pressure: 200 bar Own weight: approx. 5,580 kg Permissible total weight: 15,000 kg Integrated hydraulic lifting and tilting mechanism Hydraulic comb attachment for 240-liter containers DIN attachment for 660- and 1,100-liter roll-on-roll-off containers Cable and hook attachments Equipped with a discharge flap Condition: The machine is currently in used condition and shows visible signs of wear and tear, consistent with its age and use. The compaction container can be delivered in its current state, but if desired, it can also be fully overhauled, sandblasted, and repainted in a color of your choice. Price in current condition: €9,000 Price fully overhauled, sandblasted, and repainted: €17,500 Due to the combination of the 20 m³ capacity, integrated tilting mechanism, and flexible container attachments, this is a very practical machine for, among other applications, industry, logistics, manufacturing companies, recycling, and waste processing. Inspection and testing are possible by appointment. Please feel free to contact us for more information or technical questions. Keywords: Avermann, AVOS MPC20, MPC 20, compaction container, 20m3, waste compactor, container compactor, HKV, lifting tilting mechanism, tilting mechanism, 240 liter, 660 liter, 1100 liter, DIN attachment, comb attachment, hook attachment, cable attachment, discharge flap, waste compaction, recycling.

Condition: good (used), Year of construction: 2007, functionality: fully functional, NC-controlled drilling and dowel-inserting machine Manufacturer: Weeke Model: Optimat ABD 150 Year of manufacture: 2007 Workpiece dimensions: Length: 20 - 1250 mm Width: 100 - 800 mm Thickness: 10 - 60 mm Active center stop: maximum length 600 mm Equipment: - Horizontal drilling unit with 3 individually selectable spindles, spindle pitch 32 mm - 1 dowel insertion unit (spaced 32 mm from the first drilling spindle) - Glue nozzle with adjustable glue output - Glue flow monitoring - Mist oiler for glue nozzle - Standard dowel sizes: 8x30 mm / 8x35 mm - Vibratory feeder for automatic dowel feed 1. BASE MACHINE - Rigid welded steel frame construction - Axis travel in X, Y, and Z directions - Ball screw drives (Y- and Z-axis) and rack and pinion drive (X-axis) - Digital AC servo motor - Support table with left and right side stops and rear fence - Pneumatic center stop, manually actuated via selector switch Hjdpfx Abjxdl Rajkonu - 6 overhead pneumatic clamps, manually adjustable - Centralized lubrication system power control PC85T Modern control system based on Windows PC

Condition: like new (used), complete briquetting system, from automatic feeding to packaging press, 30 kW Hedpjz Ritwsfx Abkjnu

Condition: used, Orwak 3410 Swedish Industrial Vertical Paper Baler / Waste Baling Press (Pressing force 24t, 4 kW), Used Equipment Technical Data: Manufacturer: Orwak AB (Made in Sweden) Type: 3410 (Product No.: 4903410-00) Serial No.: 82268 Hnedpfoz Rn Awox Abkou Net Weight: 1350 kg Overall Dimensions (W × D × H): 1600 × 1100 × 3050 mm Bale Dimensions (W × D × H): 1200 × 800 × 900 mm Bale weight: up to 400 kg (Pressing force 24t, 4 kW) Electrical Data: Power Supply: 3 × 400 V / 50 Hz (3-phase) Motor Power: 4.0 kW Rated Current: 9.8 A Equipment and Features: Convenient, wide top loading opening for fast material loading Integrated strapping band holders for quick and easy bale tying Quiet, enclosed hydraulic operation with high compaction force Door mechanism with safety interlock Durable Swedish technology designed for exceptionally low maintenance costs