Used Vetaphone Corona for sale (89)

Condition: ready for operation (used), Year of construction: 2014, Printing technology: piezo DOD printheads: Xaar 1001, resolution: 720x360dpi, drying: 1xUV GOZ and 1xUV FOZ Höhnle with 7,2kW, pinning system (LED) after printing unit 1+5, extraction: in the drying unit for cooling the UV lamps and for odor minimization and improvement of sensory conditions, inert gas system: oxygen-reduced curing unit (inert gas system), consumption: under 6m³/h, printing: roll-to-roll, web width: 350mm, print width: 330mm, repeat length: min./max. printable section length 10-1000mm, print tolerance: single spacing +/-0,2mm, cumulative spacing: +/-1,5mm (over one meter), register: register accuracy +/-50μm, max. speed: 48m/min with 4 colors depending on ink coverage, white at 30m/min, speed must be preselected from 18 to 48m/min, print pre-treatment: corona with 1500VA, web cleaning: polymer rollers LC 350, air shafts: for cores with 76mm diameter for unwinding and rewinding, air shaft clamping pneumatic, clamping releasable to allow rotation of the winding mandrel, max. roll diameter for unwinding and rewinding: 610mm, max. roll weight for unwinding and rewinding: 120kg. power consumption: approx. 39kVA/60A, air consumption: 100NL/min, cooling capacity: approx. 60.000BTU/h =18kW, data interface: USB2.0, Ethernet, data format: PDF-X1 or X3 or EPS or AI, length: 4550mm, width: 1750mm, height: 2200mm, weight: approx. 3t. With documentation, chiller unit and inks. The machine is fault-free, complete and ready for operation, and has been serviced regularly. On-site inspection is possible. Bodpfx Agsxz Ewnszswi

Condition: ready for operation (used), Year of construction: 2001, A complete 5-layer coextrusion blown film line with 5 extruders and all peripheral equipment is available. Total line dimensions X/Y/Z: 14m/22m/11m, blow head: Kiefel Worms FSBK 500 with IBC, die diameter: 500mm, film width range: 700mm-2000mm, haul-off width: 2000mm, winding width: 2000mm, line speed: 120m/min, melting capacity: 500kg/h, total power requirement: approx. 300kW. 1) Double winder Wintech, winding width: 2000mm, film thickness range: 35µm-150µm, max. roll diameter: 1000mm, max. roll weight: 1900kg, core inner diameter: 152mm/6inch. 2) Extruder Kiefel Worms 70.29D, power: 89kW, screw: 5-zone barrier screw, speed: 125rpm, renewed: 2010. 3) Adhesive extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 4) Center extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone core progressive screw, speed: 175rpm. 5) Adhesion promoting extruder Kiefel Worms 50.25D for the outer layer, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 6) Kiefel Worms 80.25D outer layer extruder, power: 125kW, screw: 5-zone barrier screw, speed: 150rpm. 7) Reinhold SRK 200/9.6 film calibrating device. The entire line is controlled by a Plast Control system. Further components: integrated width measurement, C-scan for profile measurement, web center control, corona pre-treatment, film pre-draw. Including a replacement FSBK 5-layer blow head with IBC, replacement rollers, annular gap blower with filter, suction units, crane and external system terminal. Documentation available. On-site inspection is possible. Bwjdpfxsv T An So Agzsi

Condition: ready for operation (used), A 4-color central cylinder printing system WDB Systemtechnik is available. Printing units: 4, ink type: UV, max. material width: 650mm, max. printing width: 600mm, printing length range: 300mm–800mm, max. printing speed: 250m/min, material types: PET/OPP/aluminum/laminate/composite materials, material thickness range: 20µm–150µm, max. unwind and rewind roll diameter: 1000mm, operating hours: 28h, printed length: approx. 57000m. System components: unwind and rewind unit, corona, UV dryer, drying channel, IR heater, cooling unit, and supply and exhaust air fan. Including lamination unit. Documentation available. An on-site inspection is possible. Bwodpfxoxmkcte Agzji

Condition: used, Control system retrofit: 2016 • 8 flexographic printing units • Dual-drive system on all print stations • Maximum print width: 250 mm • Motorized remote-controlled longitudinal and lateral register adjustment • Register control system for up to 10 stations (Sensotec) Die-Cutting & Converting • 3 die-cutting stations - 2 stations equipped with adjustable counter-pressure cylinders (Spilker Variabase) • Additional counter-pressure cylinders for thin and thick substrates • Slitting and rewinding options for roll-to-roll and single-label output • Discharge conveyor for single labels • Traction unit between printing and converting sections • 2 nip rollers Anilox & Ink Systems • 46 anilox rollers for various applications • 4 chambered doctor blade quick-change systems • Complete with peristaltic pumps • 16 doctor blade holders • Ink circulation and control suitable for flexographic inks • Insert register control for pre-printed rolls Additional Printing & Finishing Units • Screen printing unit • Reversing station mounted on rail system • Lamination unit mounted on rail system • 3 lattice rewinders mounted on rail system Bsdpfx Ageyi Aclozowi • Additional lattice rewinder • BG 74 infeed rewinder Drying & Surface Treatment • 8 UV curing units Uviterno • Output: 240 W/cm • Includes spare lamps and accessories • Corona treatment unit: 1 kW • Web cleaning system: Teknek • Complete anti-adhesive roller equipment Web Handling & Control • Web edge guiding system: Erhardt + Leimer - 2 ultrasonic sensors - 1 line sensor • BST video inspection system • Tension control station between printing and converting sections • Double-spindle rewinder for roll-to-roll operation Auxiliary Equipment & Tooling • Worktable with shelving and drawer systems for: - Tools - Anilox rollers - Magnetic cylinders - Accessories • Various spare parts and accessories

Condition: used, Year of construction: 2016, The Gallus TCS 250, manufactured by Gallus in 2016, is a high-performance label printing press designed for efficiency and precision. With a format of 265 mm and a print count of 2 million, this machine is currently available in stock and located in Germany. This press is equipped with a range of advanced features to meet various printing needs. It operates at a speed of 11,000 impressions per hour and has a cylinder circumference of 254 mm, accommodating a web width of 265 mm. The hotfoil stamping speed is 8,000 cycles per hour, with a maximum print size width of 265 mm and a minimum of 130 mm, allowing for precise format adjustments in increments of 0.01 mm. The machine operates at a voltage of 400V for the main unit and 230V for peripherals, with a net frequency of 50Hz. Key features include a feeding unit with web cleaning, corona pretreatment for enhanced adhesion, and trimming and suction capabilities. The press can handle paper weights ranging from 80 to 180 g/qm2 and carton up to 300 g/qm2 with a maximum thickness of 0.3 mm. It is compatible with commercially available adhesive bonds and supports UV offset printing. The configuration includes 4 printing units, 1 coating unit, 1 rotary die cutter unit, and a rotary hotfoil embossing unit. Additional features include web inspection via the Powerscope 4000 manual system, a Uviterno Coldstar water-cooled drying model with UV capabilities, 4 trimming knives, mesh pulling monitoring, and an IR dryer. The maximum web diameter is 800 mm, and the press is equipped with remote maintenance capabilities, a plate tool, and maintenance tools for ease of use and upkeep. Format: 265 mm Equipment: Speed: 11.000 T/h Cylinder circumference: 254mm Web Width: 265mm Hotfoil Stamping Speed: 8,000 cycles/h Max print size width: 265 mm Min print size width: 130 mm Format length graduation: 0,01 mm Machine Voltage: 400V Voltage Peripherals: 230V Net Frequency: 50hz Feeding Unit Web Cleaning Corona Pretreatment Trimming and Suction Paper: 80 bis 180 g/qm2 Carton: up to 300g/qm2 at max. 0.3mm Adhesive Bonds: commercially available UV Offset Printing Units: 4 Coating Units: 1 Rotary Die Cutter Units: 1 Rotary Hotfoil Embossing Unit Web Inspection Web Inspection type: Powerscope 4000 manual Drying Model: Uviterno Coldstar Water cooled IR or UV: UV Trimming Knives: 4 Mesh Pulling Monitoring IR Dryer Max. Web Diameter: 800mm Remote Maintenance Plate Tool Maintenance Tools Bjdpfjvfx A Aox Agzowi

Condition: good (used), Year of construction: 2008, OMET FLEXY S330 Year of Manufacture: 2008 _____ Technical Specifications: Bwedju St R Espfx Agzsi - Number of Colors: 8 - Web Width: 350 mm - Print Width: 330 mm - Drying System: o UV drying on all stations o 3 additional hot air dryers Unwinder: Single Rewinder: Double _____ Additional features: - 3 Corona Treaters - 1 turn bar - Material thickness: Min. 50 μm, Max. 350 μm - 1 Turn Bar for cold foil lamination - 2 Cutting Stations - 1 Laminating Unit for varnishing and self-adhesive lamination - Coldfoil - Camera Inspection _____

Condition: good (used), Year of construction: 2005, UV Flexographic Printing Press Year of Manufacture: 2005 Servo-driven UV flexographic printing press Working Width: 330 mm / 13" Configuration and Equipment Bodpfsyf Iaujx Agzswi → Unwind → Web guiding system → Splice table → Corona treater → Web cleaner → Delamination / relamination unit with web turn bars → 6 flexographic printing units → 6 GEW UV dryers → Automatic register control → Chill rollers → Rotary die-cutting station → Waste matrix rewind → BST web inspection camera → Product rewind

Condition: used, Year of construction: 2005, Line Configuration 1. Unwinding Unit - Serame web unwinder 2. Corona Treatment System - Ferrarini & Benelli corona treatment unit; designed for double-sided treatment, currently only the top side is active 3. Web Suction System - Kelva web suction unit 4. Web Register Infeed Printing Units (Offset) 5. Printing Unit DW 1 – Offset 6. Printing Unit DW 2 – Offset - IST UV dryer 7. Web Turn Device - Web turner Possible Printing Configurations: 2 / 6-color printing Up to 8-color printing possible 8. Printing Unit DW 3 – Offset 9. Printing Unit DW 4 – Offset 10. Printing Unit DW 5 – Offset 11. Printing Unit DW 6 – Offset IST UV dryer 12. Printing Unit DW 7 – Offset 13. Printing Unit DW 8 – Offset UV drying Coating and Drying 14. Flexo Coating Unit IST UV and water-based coating 15. Drying Systems Adnos hot air dryer UV dryer available Inspection and Quality Control 16. BST Web Video Inspection System 17. BST 100% Inspection System – IPQ Check Rewinding 18. Rewinding Unit Serame web rewinder Additional Equipment: - Technotrans temperature control system - Web break sensors - Anti-static system - Central control console with: Bodeyhayrepfx Agzowi - Eltromat register control system - Operator monitors for machine control and visualization

Condition: good (used), Year of construction: 2000, SANJO PO3-350 / Offset Labelpreess We present this SANJO PO3 Offset Labelpress max format 254mm x 330mm / year of manufacture 2000 Machine details:  Year of construction: 2000  Printing process: 6 x Offfset (Toray)  FLEXO VARNISH UNIT  unwind unit  CORONA DISCHARGE UNIT  2 x HOTSTAMPING UNIT  1 x AIR COOLING DEVICE  UV AIR COOLED UV UNITS  FLATBED DIE CUTTING STATION Bwsdju I Nu Sepfx Agzei  SANJO REWINDER with SPOR VARNISHER  MULTIPASS UNIT  High Speed modification has been included Technical- and optical condition: Technical: 9/10 (checked and in excellent running condition) Optical: 9/10 (cleaned and can go to end-user directly)

Condition: good (used), Year of construction: 2009, Exclusive Offer for OMET VARYFLEX VF 530 F1 🌟 🔹 Color/Webwidth: 8 x Flexoprinting / 530mm 🔹 Brand: OMET 🔹 Year: 2009 _____ ✨ Features at a Glance ✨ 📄 Designed for Versatility This advanced printing line is perfect for self-adhesive labels on a variety of materials, from paper to plastic films! 🎨 🎛 Unwinder & Web Cleaner Includes a single-side contact web cleaner and corona treatment for optimal material preparation. 🎨 8 Flexo Printing Units with Sleeve Technology Complete with 8 pull-out ink cassettes for easy color changes. Plus, a reverse printing kit on the 1st unit! 💡 UV Drying & Cold Foil Capabilities Equipped with 8 GEW UV lamps and a cold foil unit on sliding rails for metallic effects and high-end finishes! 🔧 Die-Cutting & Finishing Two rotary die-cutting stations with a hoist for quick magnetic cylinder changes. Plus, a longitudinal scissor cutting unit with 4 knives for precise slitting. 📸 Inspection system BST Eltromat camera for real-time monitoring and a vision system for accurate register control. _____ 💼 Included Equipment 💼 🟢 Complete set of sleeves Various sizes of cliché sleeves and holders, designed for seamless compatibility and versatility. 🌈 22 Anilox Cylinders Multiple line counts and volumes for flexible ink application and printing quality. ⚙️ 4 Magnetic Cylinders Ready to meet diverse cutting and finishing requirements with sizes Z120, Z135, Z168, and Z176. _____ Bwsdpfx Agju Ik Uyszei 📝 Ready to Take Your Label Printing to the Next Level? 📝 This OMET VARYFLEX VF 530 F1 from 2009 offers premium performance, flexibility, and all the tools needed for professional label printing.

Condition: used, SANDWICH PANEL LINE FOR DOORS AND WALLS : 610mm width Made by METECO This sandwich panel production line is designed to manufacture doors & walls panels up to 610mm with an annual capacity of 1.500.000 m panel/year. Bwsdpfsvtpciex Agzoi MAIN PRODUCTION DATA Width: 500 - 610 mm Thickness: 40 - 80 mm Capacity: 1.500.000 m panel/year TECHNICAL SPECIFICATIONS Line speed: 12 m/min Maximum weight of reels that can be used: 10 Ton Coil outer diameter: Maximum 1400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum thickness of producible panels: 80 mm Power supply: 400 V Frequency: 50 Hz SCOPE OF SUPPLY 1. Upper sheet metal treatment section - 10 T upper unwinder with coil carriage - Pinch-Roll and roller passage - Upper reel steel frame - Polyethylene film applicator - Embossing machine for texture pattern - Press for decoration pattern - Profiling machine with upper rollers (12 stands) - Steel upper frame for profiling machine - Upper sheet guide 2. Lower sheet treatment section - Lower 10 T double unwinder with reel carriage - Polyethylene film applicator - Corona treatment machine - Embossing machine - Lower roller forming machine (12 stands) - Rollway - Operator desk for entry line 3. Panel forming section - Hot air preheating oven - Sheet guiding unit - Steel reinforcement machine - High-pressure foaming plant - Foaming portal - Foaming booth - Side sealing system and tape applicator - Double press conveyor - Double belt heating system - Double belt press - Outfeed roller conveyor - Sawing machine for cutting - Soundproof cabin - Dust extraction unit - Operator Control desk 4. Stackable section - Automatic panel tilter - Stackable conveyor - Extraction conveyor - Packaging section - Styrofoam spacer feeding system - Infeed conveyor - Packaging machine - Extraction conveyor - Wrapping machine 5. Panel production equipment - Top roller forming tools - Bottom roll forming tools 6. List of additional machines - Container station for polyol, isocyanate and additives - Pentane tank and accessories Width: 500 - 610 mm Thickness: 40 - 80 mm Line speed: 12 m/min Maximum weight of reels that can be used: 10 Ton Coil outer diameter: Maximum 1400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum thickness of producible panels: 80 mm Power supply: 400 V Frequency: 50 Hz Capacity: 1.500.000 m panel/year

Condition: used, mileage: 1,049,117 km, power: 235 kW (319.51 HP), first registration: 08/2010, fuel type: diesel, number of seats: 45, gearing type: automatic, next inspection (TÜV): 09/2024, emission class: euro5, color: red, brakes: retarder, Equipment: ABS, parking heater, * Clean vehicle * Well-maintained interior * From ongoing operation / ready for immediate use * Currently registered, with no repair backlog * Kilometers may increase slightly * Corona hygiene protection wall registered * 45 seats * 37 standing places Bwsdpfxoxdgrle Agzoi * Euro 5 engine / EEV * Engine code: 1999/96/EG,C,EEV,GKL:G1 * New MOT in July 2022 * All information without guarantee * Subject to prior sale

Condition: good (used), Year of construction: 2002, UV flexo printing technology UV drying system GEW drying type GEW Bwedeuy Nt Sspfx Agzoi air-cooled UV lamps inspection camera BST Corona device varnishing the material can be used from 157 - 333 mm max. print width 320 mm die cutting unit with insertion option three position die cutter 1x magnetic cylinder 85 teeth, 7x printing cylinder 85 teeth + bearings 1x magnetic cylinder 92 teeth, 7x printing cylinder 92 teeth + bearings 1x varnishing roller the machine does not include a hot embossing, lamination, cross-over, embossing, screen printing printed 41 045 hours Magnetic cylinder: 85 + 92 teeth 7 pcs printing cylinder 85 teeth 7 pcs printing cylinder 92 teeth 2 pcs back pressure cylinder 1 pcs UV lamp 2 pcs varnish cylinder 7 x ink fountain 1 x varnish pump anilox cylinder 2 x GTT XS 1 x GTT XP 1 x GTT S 320/2,5 220/6 160/9

Condition: used, Year of construction: 2006, working width: 520 mm, roll width: 520 mm, roll diameter: 1,000 mm, Equipment: documentation/manual, We offer this used ETI Converting Equipment Cohesio ST 520 coater, die cutter, UV silicone coating, flexographic printing press 1 colour, , 11 magnetic cilinders, year of construction 2006. multifunctional equipment that allows self-adhesive materials and labels. linerless 1 flexo 2 hotmelt coating guns (roatating bar, lips + ‘Waterwall”) 3 unwinders Web width of 520 mm E + L webguides at the infeed and between hotmelt and UV printing unit 2 Corona treatments for two unwiders 2 cleaners UV Curing on 1 Flexo units (UV-Ray), which chilling rolls 2 die cutting units Chiller Working hours 9000 Year of production 2006 Bedpfx Agjyalqyozewi more information on request If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2016, condition: good (used), Codimag VIVA 340 Aniflo  Age: 2016  Format: 340mm  Paper unwinding  Corona unit  Web cleaning  6 x Offset  Hot foil unit.  2 x Flexounit  Web edge control  CHILLER  Register Control  Paper rewind Bjdpjtnhyqefx Agzjwi

Year of construction: 2018, condition: refurbished (used), Digital hybrid press with 4 color digital + one Flexo UV LED Station + die cutting station + laminate + Cold Stamping Width: 330mm 4x charge corona unit 4x drums 2x fuser belt 1x belt cleaning blade 3x 2nd transfer upper roll 1x fusing roll 2x setting toner No 2 1x set of steal gears for Konica Minolta printing unit 1x sheet one assy 1x suction dustproof filter 1x 2nd transfer earth plate 1x set of fuser heat insulting sleeves 2x waste toner 3x Teknek cleaning rolls (web cleaning system) 1x FUSER UNIT (used working well spare part) Bwodpfjh Ug U Esx Agzoi + Magnetic Cylinders from Rotometal company • Die Cutting – 9,10,11,12,13,14,15 Inch • Printingcylinder– 12,13,11 Inch

Year of construction: 2008, condition: good (used), Low Density Polyethylene (LDPE) Film Production Line Bodsym Avyspfx Agzewi High Capacity Blown Film (LDPE) Production Line, Comprising Of The Following Main Components, Extruder A - Bieloni: Screw Equipped With MSM Gravimetric Dosing Unit, Extruder B - Bieloni: Equipped With MSM Gravimetric Dosing Unit, Extruder C - Bieloni: Screw Equipped With MSM Gravimetric Dosing Unit. Blower Unit DOLCI, Ø400mm (Includes Spare Blower Ø600mm). Downstream & Auxiliary Equipment: Printing Unit, 4 Colours (3 Currently Installed), Corona Treatment Unit, Cooling Unit EURO CHILLER, 110kW (Year 2008). Technical Data (Approx.): Film Thickness: 75–200μm, Maximum Film Width: 6,000mm (Flat) Or 1,840mm (Folded). Maximum Printing Width: 1,600mm. Overall Dimensions: L18,500 × W11,500 × H13,000mm. Metal Supporting Frame: 4,700 × 4,700 × 11,000mm.

Year of construction: 2019, condition: good (used), Year of Manufacture: 2019 Machine Type: Hybrid Digital Inkjet Printer Model: Gallus Labelfire 340 Printing Colors: 8-colour digital inkjet, 1200 dpi Web Width: 340 mm Key Features: - 📌 Hybrid Technology: Combines digital inkjet printing with flexographic printing capabilities Bwedpfx Asutaz Segzji - 🎨 Flexographic units: 2 x flexo units - 🖌️ Screenprinting Units: Screen printing for high-opacity prints - ✨ Cold Foil Unit: For metallic finishing - ✂️ Die-Cutting: Semi-rotary die-cut system for versatile cutting options - 🌐 Surface Treatment: Corona treatment for enhanced ink adhesion - 🔪 Cutting System: Integrated cutting for finished label rolls Material specifications: - 📏 Supported materials: Mono films (30 - 200 µm), paper (30 - 400 µm), composite materials (30 - 400 µm) - 📦 Spindle Core Diameter: 76 mm - ⚖️ Maximum roll weight: 250 kg Technical and Optical Condition: - Technical Condition: 9/10 (checked and in excellent running condition) - Optical Condition: 9/10 (cleaned and can go to end-user directly)

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, COMEXI ML2 Laminating machine, manufactured 2021 for sale! Designed to work with solvent and water-based adhesives or lacquers TECHNICAL INFORMATION The machine general structure · Primary unwinder · Application unit · Drying tunnel · Secondary unwinder · Lamination unit · Rewinder Solvent base and water-based section (Rotogravure application trolley) Flexo printing section (application trolley in flexo) APPLICATION Mechanical speed: 450 m/min (1476 ft/min) (Production speed depends on the support and adhesives used). • Maximum web width: 1.330 mm (52”) • Maximum laminating width: 1.315 mm (51.7”) • Minimum width of web to be laminated: 500 mm (19.6”) PRIMARY & SECONDARY UNWINDERS Maximum roll diameters: 1000 mm (40”) Maximum roll weight: 1000 kg (2204 lb) Mandrel diameters: (76 / 152 mm) 3", 6" Minimum web tension: 20 N Maximum web tension: 550N REWINDER Maximum roll diameters: 1000 mm (40”) Maximum roll weight: 1000 kg (2204 lb) Minimum web tension: 40 N Maximum web tension: 550N DRYAING TUNNEL One blower fan of 7500m3/h One extraction fan of 7500m3/h ELECTRICS Voltage 3x400V+-10%// 50Hz Bwsdpjyhnbkefx Agzei HEATING SYSTEM Gas burners Heating power of each heating source 300kw PNEUMATICS · Pressure 6-9 bar · Consumption with pump and stirrers 420l/min. · Feed line :1/2” HYDRAULICS Hydraulic power source (heating units) · Water pressure 3 bar max. · Consumption in cooling 900l/h max · Feed tube ½” CHILL ROLL · Water pressure 3 bar max · Water temperature 15-20˚C · Temperature difference 4 ˚C · Pressure difference 2.5 bar · Flow rate 2000l/h · Feed tube 1/2” Materials · LDPE, LLDPE 30-200mkm · NYLON CAST 30-80mkm · OPA 10-50mkm · PET 10-50mkm · PP CAST 30-200mkm · PAPER 40-200gsm · BOPP 12-80mkm ADDITIONALLY INCLUDED 6KW CORONA TREATER for primary unwinder 6KW CORONA TREATER for secondary unwinder ANTISTATIC BARS for primary unwinder ANTISTATIC BARS for secondary unwinder ANTISTATIC BARS for rewinder

Year of construction: 1997, condition: good (used), Maximum material width: 410 mm Jumbo roll diameter max: 1000 mm Maximum print width: 405 mm Maximum print length: 609.6 mm Maximum die-cutting width: 405 mm Minimum die-cutting length: 254 mm Maximum die-cutting length: 609.6 mm Die waste rewinder diameter max: 800 mm Maximum printing speed: 100 m/min 8 flexographic printing units without corona treatment 1 single-sided web cleaner 8 UV dryers 2 die-cutting units, Gapmaster Bwjdpswxpubofx Agzoi with extensive accessories Machine is in production

Year of construction: 2012, condition: excellent (used), functionality: fully functional, For sale: SMAG E-CUT S 330, a robust, versatile, and high-productivity roll-to-roll label finishing system. Designed for digital and conventional printing lines seeking flexibility, precision, and premium value-added finishes. This equipment is ideal as a complement to digital presses, enabling lamination, die-cutting, slitting, and rewinding in a single workflow. -> General data: - Model: E-CUT S 330 - Year of manufacture: August 2012 Bjdpfx Agsyapy Eozswi - First installation: February 2013 - Maximum web width: 330 mm - Maximum unwind roll diameter: 700 mm - Maximum speed: up to 35 m/min -> Configuration and Units: - Unwinder with ultrasonic web guide - Fully rotating flexo station - Lamination unit - Semi-rotary die-cutting with Z 160 magnetic cylinder - K&B GapMaster for precise adjustments - Corona treatment for improved adhesion - Longitudinal slitting unit with up to 10 knives - 2 rewinders - Matrix rewinder -> UV System: In 2017, an air-cooled Phoseon UV-LED lamp was installed, improving energy efficiency and reducing maintenance. -> Key strengths: - High industrial productivity and reliability - Great versatility for both digital and flexo jobs - Precise and stable die-cutting - Ready for a wide range of materials - Ideal for short to medium runs with quick job changeovers -> Equipment condition: - Machine in good working order, well-maintained and operational. - Available for inspection and testing without obligation. Reason for sale: Restructuring / change in production strategy.

Condition: good (used), Year of construction: 2006, 8 color (7 mounted) Polytype BDM 611 cup printing machine. Including viterno UV system and Corona, Arcotec pre-treatment. * Capacity: 36000 cups/hr * Min. cup diameter: 60 mm Bodpfx Ajn Utdqjgzewi * Max. cup diameter: 130 mm * Max. cup height: 160mm This Cup Printing machine is already disassembled and secured for transport (Location: Waalwijk, The Netherlands)

Year of construction: 2006, condition: good (used), 8 color Polytype BDM 611 cup printing machine. Including viterno UV system and Corona, Arcotec pre-treatment. * Capacity: 36000 cups/hr * Min. cup diameter: 60 mm * Max. cup diameter: 130 mm * Max. cup height: 160mm Bjdpfx Aon Utctjgzjwi This Cup Printing machine is already disassembled and secured for transport (Location: Waalwijk, The Netherlands)

Condition: used, Year of construction: 2007, General Information • Machine type: Modular flexographic printing and converting press • Maximum printing width: 510 mm Printing Units Number of printing units: 3 Drive system: Dual drive per printing unit Printing technology: Flexographic Plate cylinder pitch: 1/8" Plate Cylinders (1/8") • 3 × Z88 • 3 × Z92 • 3 × Z96 • 3 × Z100 • 3 × Z108 • 3 × Z116 • 3 × Z120 • 3 × Z140 Die-Cutting Units Number of die-cutting stations: 3 Counter-pressure cylinders: 2 stations equipped with adjustable counter-pressure cylinders (Spilker Variabase) Magnetic Cylinders (1/8") • 2 × Z96 • 3 × Z100 • 3 × Z108 • 3 × Z116 • 3 × Z120 • 4 × Z140 • 3 × Z176 • 3 × Z184 • 2 × Z192 • 1 × Z222 Anilox Rollers Total anilox rollers: 13 Bsdpfex Ngfljx Agzjwi Volumes (cm³/m²): 4.1 / 5.04 / 6 / 6 / 6.3 / 6.09 / 8 / 8.25 / 9.58 / 13 / 13.51 / 16.57 / 30 • 2 new anilox rollers included Coating & Special Units • Sleeve holders for varnishing: - 3 × sleeve holders Z88 - Including mounting station • Screen printing unit • Laminating station Drying Systems UV systems: 3 × UV units Uviterno, 240 W/cm NIR drying: 2 × NIR modules for water-based systems (Lambda Technology) Web Handling & Rewinding Grid winders: 2 × rail-mounted grid winders (up/down) Rewinder: Double-spindle rewinder for roll-to-roll operation Delivery: Conveyor belt for single labels Web cleaning system Complete set of non-stick rollers Corona & Web Guiding Corona treater: 2 kW (SIT) Web guiding system: • Erhardt+Leimer (E+L) • 2 × ultrasonic sensors • 1 × line sensor Inspection & Register Control Video inspection system: E+L Elscan Register control: • Sensotec • Register control for 5 stations (3 printing + 2 die-cutting) Inserter control for pre-printed rolls

Condition: good (used), Year of construction: 2007, Gallus EM 510 • Year of manufacture: 2007 • Maximum printing width: 510 mm • Printing units: 3 dual-driven print stations Bedpfx Aox Hacrjgzswi • Application: Self-adhesive label production _____ Printing Equipment • 3 flexographic printing units with dual-drive technology • Plate cylinders (1/8"): 3 × 88, 3 × 92, 3 × 96, 3 × 100, 3 × 108, 3 × 116, 3 × 120, 3 × 140 • Magnetic cylinders (1/8"): 2 × 96, 3 × 100, 3 × 108, 3 × 116, 3 × 120, 4 × 140, 3 × 176, 3 × 184, 2 × 192, 1 × 222 • 13 anilox rollers (various volumes: 4.1; 5.04; 6; 6; 6.3; 6.09; 8; 8.25; 9.58; 13; 13.51; 16.57; 30) • 2 brand new anilox rollers • 3 sleeve systems z=88 for varnishing (including mounting station) • Screen printing unit _____ Die-Cutting & Converting • 3 die-cutting stations • 2 stations equipped with adjustable counter-pressure cylinders (Spilker Variabase) • Laminating station • Waste matrix removal on rail system: o 2 matrix rewinders (upper/lower) • Double-spindle rewinder (roll-to-roll) • Insetter system for pre-printed webs • Register control for 5 stations (3 printing + 2 die-cutting, Sensotec) _____ Drying & Treatment • 3 × Uviterno UV curing systems (240 W/cm) • 2 × Lambda Technology NIR drying modules for water-based inks • Corona treatment 2 kW (SIT) _____ Web Guiding & Control • E+L web guiding system with: o 2 ultrasonic sensors o 1 line sensor • E+L ELSCAN video inspection system • Web cleaning system • Complete set of anti-adhesive rollers _____