Used Vertical Glass Washing Machine for sale (69,084)

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Vertical glass washing machine Maximum working height: 1300 mm Open top Working direction: from left to right 4 brushes (2 pairs) Glass thickness: 4 - 12 mm More technical information can be found attached as Tech. data file In very good and clean condition Good working order, tested As is Available immediately See video Lhjdsy Uhmuspfx Afkok

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, Vertical glass washing machine Working height: 1500 mm Open top Glass thickness: 2 - 13 mm Working direction: from right to left Washing machine consists of: - 2 brushes (1 pair), - 2 pcs. of air knives, - 1 stainless steel water tank separated in 3 parts (1 part with water heating), - motorized inlet and outlet conveyors, - outlet conveyor is with inspection lamps. The speed of movement of the conveyor is regulated by inverter Ljdpfx Aey Na Rnjfkjhk Total floor dimensions: L 4900 x W 1500 x H 2650 mm Very good and clean condition Good working order, tested See video As is Available immediately

Condition: excellent (used), Year of construction: 2016, MBR RADOVANOVIC WSR-27 Maximum glass height: 2700 mm Working direction: from left to right (L-R) PLEASE NOTE Machine excluding inlet and outlet conveyors Very good and clean condition Good working order Lhodpfsq Ih Nysx Afkek Available immediately

Year of construction: 2008, condition: ready for operation (used), A vertical washing and drying system for flat glass is offered: 3 cleaning zones, 6 roller brushes, drying zone (warm air), warm water treatment (heating tank), quartz sand filter, recirculation system, suitable for: float glass, laminated glass, load capacity: 150kg/m², glass thickness: up to 15mm, working height: approx. 2000mm. Inspection possible by arrangement. Ledpfx Aex Hff Ssfkshk

Year of construction: 2012, condition: ready for operation (used), A glass processing plant with several production lines is available. 1) Cutting line with automatic breaking system 2) Cutting line with automatic breaking system 3) Glass scrap disposal line 4) Glass scrap disposal line 5) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 6) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 and portal drilling machine, max. glass dimensions: 2600x2200mm 7) Control system 8) Water supply system for washing machines with circulation water treatment, sludge dewatering, chemical supply, and additional components 9) Horizontal tempering furnace Tamglass ProE-2442-ABS-20 10) Domino D550+ 10 (55W and 10mm scanner). A large number of spare parts, complete spare robots, and numerous glass racks in various formats are also available for purchase. Complete documentation available. On-site inspection is possible. Lodpexcx A Tefx Afkjhk

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: 160410, Open top washer for 3-12mm Lsdownw Afepfx Afkshk Washing height 1600mm

Condition: used, • Technical Data: • Washing width – 2800 mm • Support height – 900+/-30 mm • Min. glass dimensions – 360 x 300 mm Lhodpfx Afow Adn Rekek • Max. glass dimensions – 4800 x 2800 mm • Glass thickness – 2-19 mm • Transport speed – 2-13 m/min • Operator side – left • Adjustable upper frame height extendable up to – 400 mm • Number of spray units – 2 pcs • Number of washing units – 2 pcs • Number of drying units – 5 pcs • Brush roller adjustment – pneumatic • Machine width – 3760 mm • Machine length – 3480 mm • Machine height/with blower platform – 1480 mm / 3900 mm • Price on request

Condition: ready for operation (used), A horizontal Malnati glass washing and drying machine is available. Nominal working width: 800mm, glass thickness range: 2mm-8mm, min. glass dimensions X/Y: 100mm/100mm, min. glass sheet spacing: 50mm, feed speed: 3.5m/min, washing brushes: 4. Machine dimensions X/Y/Z: approx. 2400mm/1350mm/1300mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible. Lodjznmxgepfx Afkjhk

Condition: as good as new (ex-display), Year of construction: 2025, Schiavo Hydro 3000.6 Max. Glas-height: 3.000 mm Thickness: 3-22 mm Prewashingzone / Mainwashingzone / drying zone Stainless steel body Lsdpswd N Urjfx Afkohk 6 brushes (150 mm) maid out of one piece with Incl. water tanks incl. vacuum system for drying zone LED lights on the outled for inspection

Condition: as good as new (ex-display), Year of construction: 2025, Schiavo Top 1600.4 Max. Glas-height: 1.600 mm Lhsdpfsvxf Uxjx Afksk Thickness: 3-19 mm Prewashingzone / Mainwashingzone / drying zone Stainless steel body 4 brushes (120 mm) maid out of one piece with Incl. water tanks incl. vacuum system for drying zone LED lights on the outled for inspection

Condition: as good as new (ex-display), Year of construction: 2025, Schiavo Top 2000.4 Max. Glas-height: 2.000 mm Lhedpfx Afswd Raiekek Thickness: 3-19 mm Prewashingzone / Mainwashingzone / drying zone Stainless steel body 4 brushes (120 mm) maid out of one piece with Incl. water tanks incl. vacuum system for drying zone LED lights on the outled for inspection

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, total length: 11 mm, total width: 2,500 mm, total height: 3,500 mm, working height: 520 mm, input voltage: 400 V, overall weight: 6,000 kg, type of input current: three-phase, power: 60 kW (81.58 HP), Lisec glass washing machine VHW-25V8, year 2002, working direction left/right, with 8 brushes for low-e, including following: Lsdpezq S A Njfx Afkehk - inlet conveyor (3,3 m) maker MBR (Maschinenbau Radovanovic) - Glass washing machine VHW-25V8 - outlet conveyor (4,4 m), maker MBR - 2 hot water tanks - 2 sandfilter - 1 blower The machine is in very good working order and is available from current location in Germany by the end of October

Condition: good (used), Year of construction: 1993, EL. connected load: 44.2 kW 6 washing brushes/good condition Lhsdswx H Tbepfx Afksk Working direction: right/left Washing height: 2500 mm Inlet to washing machine l=3200 mm Outlet to washing machine l=1100 mm

Condition: good (used), Year of construction: 1994, The machine was restocked a year ago and fitted with new brushes. The washing brushes are in very good condition! 8 brushes, Without inlet and outlet, With control cabinet and dryer fan, Working direction: from right to left, 2.3 m washing height, Glass thickness: 4-15 mm, Lsdpfeqc Udiex Afkehk Width: 2900 mm, depth: 1100 mm, height: 3400 mm.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, actuation type: electric, rotational speed (max.): 3,100 rpm, rotational speed (min.): 700 rpm, total width: 1,487 mm, total length: 4,440 mm, total height: 2,793 mm, throat depth: 1,490 mm, overall weight: 1,900 kg, Equipment: CE marking, documentation/manual, NEW | YEAR 2026 | CE CERTIFIED | MADE IN POLAND | EXW €38,000 + VAT WHY THE PRIAM The Priam is a vertical, electronically controlled glass drilling machine that does most of the work for the operator. The entire feed is electronically controlled — drilling is smooth and repeatable. The operator's role is minimal. After mounting the hole saws, they press the "Calibration" button — the machine measures the length of both drills (front and rear) and their diameter, then automatically assigns the correct spindle speed. After every drill change, the machine will not start drilling until calibration is done — setup errors are impossible. The hole position on the vertical axis is entered on the monitor and the support bar travels there automatically (up to 1,060 mm below the spindle axis); horizontally, the glass is positioned against 6 stops. The machine does the rest: the pneumatic clamp measures the glass thickness, the rear spindle pre-drills to a depth calculated by the controller, and the front spindle completes the hole from the other side — chip-free, clean edges at the first attempt. Optional: double-sided chamfering (hole saw with chamfering ring), tapered holes, and pulse drilling mode for laminated (VSG) glass. BUILT FOR SERIAL PRODUCTION Lhjdpfx Aeh Ek H Sjfkok Up to 20 holes on the vertical axis can be programmed — the operator enters the dimensions once and the machine drills them automatically. In serial production (shower enclosures, balustrades) the following panes are drilled without re-entering positions. Drilling at position 0 on the support bar allows holes on the glass edge (half-moon cut-outs). Performance: a Ø 75 mm hole in 4 mm glass in approx. 25–30 s (feed in glass approx. 1 mm/s, speed set by the operator). Recommended: thin-wall, self-sharpening hole saws (e.g. Champion, L=75 mm). TECHNICAL DATA Drilling diameter range: Ø 5–80 mm (both drills same diameter) Glass thickness: 2–20 mm Max. pane size: 2,000 × 4,000 mm, up to 200 kg Support bar travel: up to 1,060 mm below spindle axis Holes on the glass edge (half-moon): yes, position 0 Drilling program: up to 20 holes on the vertical axis Spindle speed: adjustable 700–2,800 RPM, assigned automatically after calibration Feed: automatic, electronically controlled Cooling: closed water circuit, approx. 30 l Compressed air: 6 bar (pneumatic clamping) Power supply: 400 V / 16 A / 4 kW Machine dimensions (L × W × H): 4,440 × 1,487 × 2,793 mm Weight: 1,900 kg Scope of delivery: CE marking, documentation, operating manual MANUFACTURER, SERVICE, TERMS EXPOGLASS is a Polish manufacturer of glass processing machinery — built at our own factory in Nysa (in-house welding shop and powder coating). Service with online support; spare and wear parts available from stock. Delivery and commissioning across the EU, operator training on site. Delivery time: approx. 8 weeks. Warranty: 12 months. Visit our factory and see the Priam drill your own glass samples before you buy — video of the machine in operation in this listing. Glasstec 2026, Düsseldorf, 20–23 October, Hall 12, Stand 12A72.

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2011, CE Glass 1600mm vertical glass washing and drying machine. The machine is serviced, thoroughly inspected, and ready for immediate use. Fitted with new water squeegee rubbers and new bearings. Lsdox A Uq Hepfx Afkehk Working direction: right to left Max. washable glass height: 1600 mm Number of brushes: 4 Dryer fan Stainless steel cabin Water heating Background lighting Stop sensor The machine is fully checked, cleaned, and can be viewed in perfectly working condition at our site!

Condition: good (used), - Completely overhauled by us, ready for immediate use - Type: 100013 - Serial number: 011136 Lhjdpfx Asr Nvldofksk - Glass thickness 2-12 mm - Minimum glass dimensions 120 x 80 mm - Max. Washing width: 1000 mm - Dimension: L=2900mm W=1650mm H=1250mm - Roller spacing 55mm -3 pairs of brushes / 1 pair of racks - Connected loads: 380/50V, 13kW - Price on request

Year of construction: 2022, condition: new, functionality: fully functional, machine/vehicle number: 202101410, For sale: a brand-new, unused Junya horizontal car wash – Chinese-made, purchased in 2022. Lhsdpfjzqtbyjx Afkok It was bought to set up a second lamination line, but this plan was not implemented. The machine is assembled and ready for use in the workshop; all that is needed is to fill it with water. The machines are of very good quality and operate reliably across three shifts. Price: PLN 95,000 net. Terms negotiable.

Condition: good (used), - Type: 1300A - Serial number: 951313V - Open top - Dimension: - Total length: 4900 mm - Depth 1100 mm - Height 2300 mm - Washing machine 2100 mm - Inlet 1400 mm Lhsdpfx Afjq Ec D Tjkok - Outlet 1400 mm - Washing height: 1500 mm - 2 pairs of brushes - Connected loads: 380V, 50Hz, 11kW - Price on request

Condition: excellent (used), Year of construction: 2017, Operating direction: right-left Machine is open at the top 4 brushes Washing height: 1600 mm Working height: 850 mm Depth: 1500 mm Height: 2530 mm Lhjdpfx Afszcmdaoksk Overall width: 6220 mm Weight: approx. 800 kg Condition: very good, second-hand

Condition: ready for operation (used), Year of construction: 2008, • Glass thickness (mm): up to 30 • Glass height (mm): up to 2000 • Cleaning brushes: 4 front and 4 rear Lhsdoxgtqgepfx Afksk

Condition: used, • Horizontal glass washing machine in very good, well-maintained condition • 2 brushes, top and bottom, very good condition • Roller spacing 110 mm • Minimum glass dimensions 120 x 300 mm • Maximum washing width 1300 mm • External machine dimensions Lhedpfx Afowl Dkqeksk • Length 4500 mm, width 2000 mm, height 1250 mm • Inlet – 1000 mm, outlet – 1400 mm • Machine width – 2300 mm • Price upon request

Condition: excellent (used), Year of construction: 2016, Schiavo Easy 1600.4 Lhedpfeyr N R Uox Afkek Max. Glas-height: 1.600 mm Thickness: 3-19 mm Mainwashingzone / drying zone Stainless steel body 4 brushes (120 mm) maid out of one piece with Incl. water tanks incl. vacuum system for drying zone LED lights on the outled for inspection

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, input frequency: 50 Hz, input voltage: 400 V, pressure: 6 bar, LiSEC, KSR-25, Right – Left, year 2010 Vertical Glass Edge Seaming Machine, h=2,50 m Ledpfev Eguyex Afkohk Vertical compact grinding machine for the seaming of glass sheets on all four sides in a fully automatic cycle. Inspection during production is possible by appointment. In very good working condition. Available: March / April 2025.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Vertical glass drilling machine, 1500 x 3000 Max. glass size: 1500 x 3000 mm Glass thickness: 3 – 20 mm Ledpfx Aey Nltnsfkehk Drilling diameter: 3 – 100 mm Control: NC controlled Drilling heads: 2 opposing drilling spindles (front and rear) Spindle speed: Adjustable via inverter Total floor dimensions: 7500 x 2200 x 2800 mm Excellent condition Good working order, tested As is Available immediately