Used wet dust extractor (extraction system)

STWV-K

Condition: like new (used), Year of construction: 2013, BLOW EXTRUDER HDPE Model EuroTruder 75 Made by Euro-Stel, Belgium YOM 2013 Rcedpfxewivdko Akijh extruder: diameter 75x28 D - with neck sweder and granulate hopper mold is not included EXCELLENT CONDITION

Condition: not inspected (used), Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding Redpfxjt Tqy Es Akisch machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: used, Conveyor screws, auger, screw conveyor Heavy-duty design, suitable for large capacities. Dimensions: 1x Conveyor screw, diameter 470mm, L: 4000mm 1x Conveyor screw, diameter 320mm, L: 3800mm (excluding electric motor) 1x Conveyor screw, diameter 420mm, L: 3550mm 1x Conveyor screw, diameter 420mm, L: 4050mm Equipped with heavy-duty external bearings with shaft seals. Available for sale individually or as a lot. For more information, please contact us. Rsdjyhblpspfx Akiech See our other listings. VMA Wekerom

Condition: new, Year of construction: 2026, -Smart Safety Clean Air Enhanced Efficiency. -Elevate your workplace safety with the TFON Airwet Series — a state-of-the-art wet-type air suction system engineered to eliminate sparks and dust produced during deburring processes. The Airwet Series significantly reduces the risk of fire and explosion, protecting both your workforce and your facility. -Fire & Explosion Prevention: Effectively minimizes hazardous particles and ignition sources right at the source. -Enhanced Air Quality: Rodpevg U Dxofx Akioch Captures and removes airborne contaminants, creating a cleaner and healthier work environment. Seamless Integration: Compact, space-saving design allows for easy installation into existing machinery and workflows. Increased Safety & Regulatory Compliance: Supports compliance with occupational health and safety standards, boosting overall operational safety...

Condition: excellent (used), Through-feed sander Vertongen S320 Working width 300 mm Working height up to 180 mm Combi unit with pad Manual raising and lowering of the working table Two feed speeds: 7–14 m/min Rcodpoyg Dlcjfx Akieh Main motor 5.5 kW

Condition: good (used), Wastewater treatment plant, drilling water purification, chip separator, paper filter, paper belt filter -Tank dimensions: 1000/700/H800 mm -Agitator: 0.75 kW -Speed: 1500 rpm -Equipment: as shown in pictures, conveyor belt filter/agitator Rodpeb A Ngpofx Akisch -Dimensions: 1100/710/H1650 mm -Weight: 130 kg

Condition: excellent (used), Rolei PEF 500 deburring and bevelling machine, basic model in interated in table (1200 x 788 mm, width x depth) made of aluminum profiles Rjdpfogkwckox Akisch

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, 2 polishing machines. The price is for both. If interested, please contact me. Rcsdpfx Aoziwr Tskioh

Condition: used, functionality: fully functional, maximum load weight: 4,000 kg, Year of construction: 1999, machine/vehicle number: 18843, Liebherr LH34K excavator, manufactured in 1999 Boom: 33 meters (max) - 25.5 meters (min) Load capacity: 4000 kg (max) - 1000 kg (min) Slewing radius: 2.5 m Hook height: 11.7/15/17/20-26 m Outrigger base: 3.8 x 3.8 m Slewing radius: 2.5 m Power connection: 63 A, frequency converter controlled (21 kVA) Counterweights (tons), transport weight: 18.98 t Rodjz Hk H Njpfx Akioch

Condition: excellent (used), Vertongen S-320 belt sander Sanding width: 320mm, 1 unit (rubber roller) Base 5.5KW motor Two feed speed settings, Redpfx Aozr D Tpjkiech Manual table adjustment, Oscillation, The sander is fully ready for operation.