Used Uv Printer for sale (3,465)

Year of construction: 2014, operating hours: 3,100 h, condition: excellent (used), functionality: limited functionality, MYDATA MY500JP Jet Printer 2014 in excellent condition with exceptionally low operating hours (approximately 3,100). Kept and used in a clean environment. Complete system supplied with offline programming PC, MYCAM JP software, 2D Inspection & Repair option, SMT Adhesive option, manual load tables and associated documentation. There are also some spares included which we can bundle into a sale deal for an appropriate price. Visits/Inspection are welcome by appointment. An excellent opportunity to acquire a MY500JP suitable for high-mix, low-to-medium volume SMT production. The machine exhibits an intermittent issue affecting movement on the X-axis during camera positioning. On occasion, a slight jitter or vibration is observed, which can prevent the vision system from reliably locating the PCB fiducial during initial board loading or machine initialisation. The fault is intermittent and does not occur consistently. Most of the time, reloading the PCB allows operation to continue normally. Occasionally, a machine restart is required. The root cause has not been determined, but the issue appears to be associated with the X-axis motion control system. Potential areas for investigation include the servo amplifier (drive), encoder, encoder cable or other associated motion control components. Despite this intermittent behaviour, the machine was used in active production of complex PCB assemblies, including fine-pitch BGA boards, for approximately 12 months prior to being replaced as part of an equipment upgrade. The machine is therefore offered for sale on the understanding that diagnosis and repair of this intermittent fault is outstanding. Gsdpfx Aaozlx E Tsfsuf Included: MYDATA MY500JP (2014) Approx. 3,100 operating hours MYCAM JP offline programming PC and software 2D Inspection and Repair option SMT Adhesive option Manual loading Technical documentation 4pcs AE04 ejectors Bundle of spare parts Not included: Solder paste Cassette (Holding Assembly), Solder paste, Purge Gel, Filter boxes Conveyors

Condition: used, UV drying system Totalisator operating hours 1484 The system was connected to a Heidelberg GTO 52 with LACO 52-Lackiersystem. No direct connection to the pre-machines/devices is required. Guedpjzr I U Dsfx Aafjf It is a used UV lamp ADNOS 04204B4 (current designation ADS 53-160) installed.

Condition: used, machine/vehicle number: 49064, Year of construction: 2012, equipped with 3/4 automation, anti-static kit, weight: approx. 6,000 kg, 6 printing units with a left-hand stacking device with a scissor lift table, right-hand delivery table with pneumatically folding elements, control unit, SICK laser scanning system, 1 compressed air tank ATLAS COPCO Ø 60x150 cm, cooling system / industrial chiller PARKER Hyperchill Hiross, R407c (cooling system defective). Gedpfx Aszqzaqsafjuf

Condition: used, functionality: unexamined, machine/vehicle number: Platinium GPC PDP Printer, Used IP Semi Automatic Pad Printing Installation / Pad Printer IP Printing International Semi Automatic Pad Printing Machine Gujdpfx Ajw H Naajafsf "Used for Pad Printing of PIA on son-tubes and shaped products" Manufacturer: IP Printing International Belgium Model: Slider 160 GPC+P 290 GPC Type: Platinium GPC PDP Printer Controller: Siemens Simatic Tough Panel Including pallet with tools and spare parts

Condition: excellent (used), REF: MM5767 1 x Adpak Machinery Systems Ltd stainless steel flow wrapper fitted with an ICE Zodiac Hawk thermal transfer printer and a fixed folding box. Manufacturer - Adpak Machinery Systems Ltd Model - GSP 65. Date of manufacture - 2009 approx, refurbished by Midas Motion in 2020. Gedpfeulc Sqjx Aafouf Sealing jaws - 300mm long. Fixed folding box - 40mm wide. Came out of production in 2023, this unit was previously used to individually wrap ice lollies.

Condition: excellent (used), functionality: fully functional, operating hours: 560 h, The Massivit 1800 is an industrial large-format 3D printer designed for producing full-scale prototypes, displays, molds, scenic elements, and large composite tooling. It uses Massivit's proprietary Gel Dispensing Printing (GDP) technology rather than conventional FDM or SLA processes. Fully functional, in production. Demo possible upon request. 560 hours printed only! Location: Europe Double printhead version. Price includes decommissioning and loading on truck. Installation and training available. Permanent software license Manufacturer Company: Massivit 3D Printing Technologies Model: Massivit 1800 Core Specifications Specification Value Printing Technology Gel Dispensing Printing (GDP) Build Volume (W×D×H) 1.17 × 1.50 × 1.80 m Maximum Part Weight 150 kg Z-axis Productivity Up to 35 cm/hour Linear Print Speed Up to 300 mm/s Material Dimengel UV-curable photopolymer File Format STL Machine Footprint 3.1 × 2.2 × 2.8 m Machine Weight 2,500 kg Electrical Requirement 380–400 VAC, 3-phase, 32 A Gusdpfxszcv S He Aafjf Power Consumption ~10 kW during printing Air Supply 6–8 bar compressed air Operating Temperature 16–30 °C Compliance CE For further technical and commercial information, please refer to enclosed brochure.

Condition: used, Set of dual setups on rolling stand. Guedpfxec Skirj Aafef Dual print heads allows for the marking of two product lanes Great for printing dates or codes on virtually anything, from plastic bottles to plastic bags to paper Stainless steel casing Stand mounted with casters Additional Details Voltage: other Voltage: 100-240 Phase: 1Ph Hertz: 60Hz

Year of construction: 2017, condition: ready for operation (used), Resolution X/Y/Z: 600dpi/600dpi/1600dpi, max. build dimensions X/Y/Z: 342mm/342mm/200mm, max. materials per component: 82, min. layer thickness: 16µm. Machine dimensions X/Y/Z: approx. 1400mm/1300mm/1100mm, weight: approx. 450kg. Documentation available. On-site inspection is possible. Guedpfx Aaex H S N Refof

Year of construction: 2005, condition: ready for operation (used), Drying capacity: 2x120W/cm, total drying capacity: 14000W, working width: 600mm, lamp type: 2x120W/cm, cooling: integrated, vacuum cassette: adjustable, conveyor belt speed: adjustable, machine dimensions X/Y/Z: approx. 3900mm/1200mm/1300mm, weight: approx. 700kg, operating hours: approx. 4400h. Including ozone extraction and a new measuring device UV-Integrator Full-UV with integrated heat shield and calibration certificate. 2 converters, 2 lamps and the belt have been replaced. Documentation available. On-site inspection is possible. Gedpfxeu Afz Ro Aafouf

Condition: ready for operation (used), An inkjet-based industrial PolyJet/material jetting 3D printer Keyence for photopolymers is available. Build volume dimensions X/Y/Z: 297mm/210mm/200mm, resolution: 635dpi/400dpi, XY resolution: 63.5µm/40µm, layer thickness range: 15µm-30µm, machine dimensions X/Y/Z: approx. 950mm/700mm/1400mm, weight: approx. 200kg. Documentation available. An on-site inspection is possible. Gedpjy Anunefx Aafeuf

Year of construction: 2011, condition: ready for operation (used), An inline SMT stencil printer/solder paste printer is offered. Print area X/Y: 50mm/40.5mm - 510mm/508.5mm, PCB thickness: 0.2mm - 6mm, board weight max.: approx. 1kg, print pressure range: 0 - 20kg, core cycle time: approx. 12s, machine alignment capability: greater 2Cpk at +/-12.5µm 6 Sigma, process/wet print accuracy: greater 2Cpk at +/-25µm 6 Sigma, installation space L/W/H: approx. 2060mm/1500mm/1570mm, machine weight: approx. 800kg. Inspection by arrangement possible. Gujdeylzhlopfx Aafjf

Year of construction: 2021, condition: ready for operation (used), A complete GEW UV curing system for a Gallus Labelmaster LM 440 is offered. Max. UV output: 140W/cm, UV lamp housings: 11, including 9 housings with lamps and 2 housings for screen printing modules, Operating hours: approx. 2900h/lamp, HMI: for 10 stations, Control system: GEW RHINO HMI. Including 2 RHINO control cabinets, 2 fans, a complete exhaust duct system and mounting kit for the Gallus Labelmaster LM 440. An on-site inspection is possible. Gsdpozlt Rksfx Aafeuf

Condition: ready for operation (used), Year of construction: 2014, Printing technology: piezo DOD printheads: Xaar 1001, resolution: 720x360dpi, drying: 1xUV GOZ and 1xUV FOZ Höhnle with 7,2kW, pinning system (LED) after printing unit 1+5, extraction: in the drying unit for cooling the UV lamps and for odor minimization and improvement of sensory conditions, inert gas system: oxygen-reduced curing unit (inert gas system), consumption: under 6m³/h, printing: roll-to-roll, web width: 350mm, print width: 330mm, repeat length: min./max. printable section length 10-1000mm, print tolerance: single spacing +/-0,2mm, cumulative spacing: +/-1,5mm (over one meter), register: register accuracy +/-50μm, max. speed: 48m/min with 4 colors depending on ink coverage, white at 30m/min, speed must be preselected from 18 to 48m/min, print pre-treatment: corona with 1500VA, web cleaning: polymer rollers LC 350, air shafts: for cores with 76mm diameter for unwinding and rewinding, air shaft clamping pneumatic, clamping releasable to allow rotation of the winding mandrel, max. roll diameter for unwinding and rewinding: 610mm, max. roll weight for unwinding and rewinding: 120kg. power consumption: approx. 39kVA/60A, air consumption: 100NL/min, cooling capacity: approx. 60.000BTU/h =18kW, data interface: USB2.0, Ethernet, data format: PDF-X1 or X3 or EPS or AI, length: 4550mm, width: 1750mm, height: 2200mm, weight: approx. 3t. With documentation, chiller unit and inks. The machine is fault-free, complete and ready for operation, and has been serviced regularly. On-site inspection is possible. Guodpfx Aajxz Ewnefsf

Condition: ready for operation (used), Two identical Videojet printers are available. One has only been tested for a few cycles, the other is still in its original packaging. Print heads: 1, max. number of print lines: 5, max. print speed: 278m/min, text storage capacity: 250, max. marking lines: 5, documentation available. On-site inspection is possible. Gedpfx Aaju N Hdyefjuf

Year of construction: 2007, condition: ready for operation (used), A 3D metal printing machine Concept Laser GmbH in need of repair is available. Technology: Laser melting (SLM)/LaserCusing, working dimensions X/Y/Z: 250mm/250mm/280mm, layer thickness range: 20µm-80µm, max. scanning speed: 6m/s, focus diameter range: 50µm-500µm, laser power: 200W, printing materials: stainless steel/aluminum/titanium/nickel-based alloys/cobalt-chrome. Machine dimensions X/Y/Z: approx. 2450mm/2400mm/1650mm, weight: approx. 2000kg, laser cabinet dimensions X/Y/Z: approx. 600mm/1200mm/1200mm, weight: approx. 180kg, blower dimensions X/Y/Z: approx. 550mm/1450mm/550mm, weight: approx. 70kg. Including various printing materials such as titanium plates, steel plates and aluminum alloys. The machine has CF card defects and the communication between laser GUI and RCU breaks down. Documentation available. On-site inspection is possible. Gjdpfx Aasww Ivnsfouf

Condition: ready for operation (used), A 4-color central cylinder printing system WDB Systemtechnik is available. Printing units: 4, ink type: UV, max. material width: 650mm, max. printing width: 600mm, printing length range: 300mm–800mm, max. printing speed: 250m/min, material types: PET/OPP/aluminum/laminate/composite materials, material thickness range: 20µm–150µm, max. unwind and rewind roll diameter: 1000mm, operating hours: 28h, printed length: approx. 57000m. System components: unwind and rewind unit, corona, UV dryer, drying channel, IR heater, cooling unit, and supply and exhaust air fan. Including lamination unit. Documentation available. An on-site inspection is possible. Gedpfx Aaoxmkctofouf

Year of construction: 2020, condition: used, functionality: fully functional, This Rational Ultra Vent hood for Rational combi-steamers, including the connection kit, is suitable for the CMP, SCC 61/101 electric combi-steamers (index H+I). The hood has undergone an inspection in our in-house workshop and the unit is fully functional. You will receive an invoice with VAT shown. Guodpfx Aaezn H E Tefsf Are you looking for a specific type of Rational equipment? Ask us, we have access to an extensive range of used and new equipment. We will be happy to advise you on all equipment types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs Professional overhaul/inspection & expert cleaning Checked & fully functional - or your money back Flexible choice of shipping or self-collection Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 This Ultra Vent hood features patented condensation technology, which binds and removes vapors and fumes. Elaborate measures for exhaust air installation are a thing of the past. An external connection is completely eliminated. The installation is simple and can even be done retroactively. Technical data: W x D x H: approx. 854 x 1226 x 470 mm Power connection: V: 230 / Hz: 50-60 Weight: approx. 55 kg Serial number: ET1UE20015039601 Year of manufacture: 2020 Type: 60.72.320 Condition: used, inspected, fully functional Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, would you like to receive advice or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: used, For sale is a 3D Systems ProX 500 SLS system, including a post-processing station with powder feed, extraction system, nitrogen generator, and extensive peripherals. The system has been regularly maintained and operated continuously under an Elite Service Plan (full maintenance contract). Godpfozuau Ijx Aafouf SLS system: - 3D Systems ProX 500 (build volume: 381 × 330 × 457 mm) - MQC (post-processing station and automatic powder feed) - Donaldson extraction system - Nitrogen generator Extensive peripherals: - Festo ATEX vacuum cleaner - 2x blasting cabinets - Scissor lift table cart Condition & Service: - Year of manufacture: 2014 - Regularly maintained - Operated continuously under Elite Service Plan - Full maintenance contract covering the entire operating period - Well-maintained and technically serviced system The system is ideal for companies that want to take over a complete SLS production solution, including powder handling and the necessary peripherals. Preferably sold as a complete package. If you are interested, we will gladly provide further information, photos, and the available technical documentation.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: DT1UE18105029734, This Rational Ultra Vent Hood for Rational combi steamers, including connection kit, is suitable for combi steamers CMP, SCC 61/101 electric, from model year 2011 to current (Index H+I). The hood was tested in our in-house workshop and is fully functional. The hood has dents and scratches on one side panel due to improper transport. This does not affect the function of the hood, but for this reason, we are offering it at a special price. The RRP for this Ultra Vent Hood is €3,696 net. Service: We are happy to assist you in arranging a certified Rational customer service technician. Are you looking for a specific Rational appliance type? Contact us—we have access to a wide range of used and new equipment. We are happy to advise you on all device types. Our used equipment service for you: • 6 months warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs • Professional overhaul / inspection and expert cleaning • Tested & fully functional—or your money back • Flexible delivery or self-collection options • Expert advice—before and after your purchase • Provision of user manuals, wiring diagrams & spare parts • Inspection in accordance with DGUV V3 This Ultra Vent Hood features patented condensation technology, which binds and channels vapours and steam. Complex exhaust installation measures are a thing of the past. An external connection is not required at all. Installation is simple and even possible retrospectively. Gsdpfxowd Ixco Aafeuf Technical Data: • W x D x H: approx. 854 x 1226 x 470 mm • Power supply: V: 230 / Hz: 50-60 • Weight: approx. 55 kg • Serial number: DT1UE18105029734 • Year of manufacture: 2018 Condition: used, fully functional Shipping: • Delivery or self-collection by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by arrangement • Subject to change and errors excepted Do you have questions, would you like advice, or wish to view the item on site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are made exclusively in accordance with our general terms and conditions (GTC).

Year of construction: 2017, condition: used, functionality: fully functional, This Rational Ultra Vent hood for Rational combi steamers, including connection kit, is suitable for combi steamers CMP, SCC 61/101 electric from year of manufacture 2011 onwards (Index H+I). The hood has been inspected in our in-house workshop and is fully functional. You will receive an invoice with VAT shown separately. Are you looking for a specific Rational appliance type? Contact us—we have access to an extensive range of used and new equipment. We are happy to advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, or Pro. Our used equipment service for you: - 6 months warranty on electrical parts, limited to replacement of defective parts, excluding installation and removal costs - Professional reconditioning / inspection & expert cleaning - Tested & fully functional – or your money back - Flexible shipping or collection options - Expert advice – before and after your purchase - Provision of operating manuals, wiring diagrams & spare parts - DGUV V3 safety inspection This Ultra Vent hood features patented condensation technology, which captures and removes steam and vapors. Complex exhaust air installation is a thing of the past. No external connection is required at all. Installation is straightforward and can also be retrofitted. Technical data: W x D x H: approx. 854 x 1226 x 470 mm Gusdpfx Ajymlmbeafjf Power connection: V: 230 / Hz: 50-60 Weight: approx. 55 kg Serial number: ET1UE17105021600 Year of manufacture: 2017 Type: 60.72.320 Condition: used, fully functional Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Do you have questions, need advice, or would like to view something on site? You can reach us by phone during our office hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. Sale is exclusively in accordance with our general terms and conditions (GTC).

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: DT1UE19035033062, This Rational UltraVent hood for Rational combi steamers, including connection kit, is compatible with CMP, SCC 61/101 electric combi steamers from model year 2011 to present (Index H+I). The hood has been inspected in our in-house workshop and is fully functional. You will receive an invoice with VAT shown separately. Looking for a specific Rational device type? Contact us—we have access to a wide range of used and new equipment. We are happy to advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, or iCombi Pro. Our used equipment service for you: • 6 months warranty on electrical parts, limited to the replacement of defective components, excluding labor costs for removal and installation • Professional refurbishment / inspection & expert cleaning • Tested & fully functional – or your money back • Flexible options for shipping or self-collection • Competent advice – before and after your purchase • Provision of operating manuals, wiring diagrams & spare parts • Safety inspection according to DGUV V3 This UltraVent hood features patented condensation technology which captures and channels vapors and fumes, eliminating the need for elaborate exhaust installation. No external connection is required. Installation is simple and can even be done retrospectively. Technical data: • Dimensions (W x D x H): approx. 854 x 1226 x 470 mm • Power supply: V: 230 / Hz: 50-60 • Weight: approx. 55 kg • Serial number: DT1UE19035033062 • Year of manufacture: 2019 Condition: used, fully functional Shipping: • Delivery or self-collection by arrangement • Worldwide shipping on request • Shipping to islands or mountain locations only by prior agreement Guedpfx Aoxx Idleafof Do you have questions, need advice, or wish to view the item on site? You can reach us by phone during our business hours: Monday-Friday 09:00-13:00 and 14:00-17:00. Sale is subject exclusively to our general terms and conditions (AGB).

Year of construction: 2011, condition: ready for operation (used), Offered is a fully automatic EKRA screen and stencil printing system. Max. print format X/Y: 508mm/508mm, min. print format X/Y: 80mm/50mm, max. frame size X/Y: 740mm/740mm, substrate thickness range: 0.5mm-6mm, max. squeegee speed: 200mm/s, squeegee pressure range: 10N-250N, repeatability: +/-12.5µm, 6 Sigma, cycle time: 8s + printing time. Including solder paste height inspection, 2.5D SPI and fixtures for VarioGrid support bars as well as iPAG dispensing system. The machine was serviced in April 2025. Machine dimensions X/Y/Z: approx. 1140mm/1866mm/1503mm, weight: 980kg. Documentation available. Inspection possible by appointment. Gsdpfxeztrbqe Aafeuf

Condition: like new (used), functionality: fully functional, machine/vehicle number: S0711Q0147, Year of construction: 2019, total length: 1,445 mm, total height: 1,680 mm, total width: 730 mm, overall weight: 650 kg, input voltage: 230 V, laser power: 200 W, TRUMPF TruPrint 1000 – 3D metal printer in near-new condition A well-maintained TRUMPF TruPrint 1000 from 2019 is for sale. The machine is a compact and professional 3D metal printer based on laser metal fusion and is suitable for the production of complex metal parts, prototypes, and small series. Gsdpszrfirofx Aafsuf The metal printer was purchased and installed at Herningsholm Vocational School and Gymnasium in the summer of 2019. It has only been used for educational purposes and has therefore only produced a very limited number of prints. The laser has only a few operating hours, and the machine is in near-new condition. The printer has been used for printing in stainless steel 316L. All prescribed service inspections have been carried out. The latest service was performed in January 2026, and the machine has not been used for printing since. The service report is attached to the advertisement and can also be sent upon request. Various consumables and spare parts are included. Machine data Manufacturer: TRUMPF Model: TruPrint 1000 Year of manufacture: 2019 Machine type: 3D metal printer Condition: Near new Build volume: Ø98.5 x 100 mm Material used so far: Stainless steel 316L Latest service: January 2026 Location: Herningsholm Vocational School and Gymnasium, Herning - Denmark The machine can be inspected by appointment. The buyer is responsible for moving the machine.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 2 h, functionality: fully functional, shaft length: 355 mm, input voltage: 230 V, type of input current: AC, laser power: 20 W, type of cooling: water, warranty duration: 12 months, laser wavelength: 355 nm, input frequency: 50 Hz, Equipment: cabin, UV laser engraving machine with 20-watt laser power Laser source with 355nm wavelength / 20 watts Gujdpfx Ajflrnasafof Exhibition machine, with approximately 2 hours of operation - No discernible signs of wear - Includes rotary axis - Includes Windows 64-bit PC system - Includes 22" monitor - Everything is fully installed and calibrated - Engraving software in German - 3D software (MM3D) - Very easy to operate - Simply turn on and start - UV laser source with 20 watts for high-contrast and fast marking with extremely high resolution - Engraving on virtually all metals (stainless steel, brass, aluminum, etc.) - Engraving on virtually all plastics (including PVC, silicone, etc.) - Engraving on real glass (including crystal glass) - Cutting of real glass is possible - Heavy-duty industrial quality - Complete system / ready for immediate use - Work area approximately 500 x 600 x 600 mm (L x W x H) - Clamping surface with mounting threads in a 50mm grid - LED work area lighting - 50mm pipe connection for fume extraction - Engraving area approximately 150x150 / 200x200 / 300x300 (switchable) - 3D scanner for marking surfaces of any shape - Includes foot switch to start the engraving process Sales are exclusively to commercial businesses. Delivery / Consultation / Sales only in Germany / Austria / Switzerland Please also note our attractive leasing/hire purchase offers. Machine dimensions approximately: Width: 800mm Height: 1800mm Depth: 1000mm Weight: approx. 180kg

Year of construction: 2017, condition: excellent (used), machine/vehicle number: 26616, Equipment: CE marking, The Hapa 237-Hybrid is a modular UV printing system that combines the cost-effective features of flexographic technology with the full flexibility of digital drop-on-demand printing. The system is a standard solution from HAPA, designed for printing onto aluminum foil for blister machines. In its current configuration, the system is installed on a separate stand with a dedicated unwinder to enable inline printing with a blister machine. The system can be reconfigured for top-mounting or roll-to-roll operation at an additional cost. Utilizing UV-cured inks, it is ideally suited for pharmaceutical applications. Gujdjyr Imbjpfx Aafjf Installation and validation can be provided by PPS. KEY ADVANTAGES • Award-winning HMI, also available as a software version for integration into the host packaging machine interface. • Fully compatible with camera inspection systems. • Digital integration and system automation control via OPC UA. • Supports black and Pantone spot colors. • High speed, up to 35 meters per minute. • Ozone-free UV curing technology. • Format-free operation. • Automatic printhead cleaning system (DOD). • Simple and accurate print plate mounting (Flexo) using location pins, eliminating the need for adhesive tape. • Easy to handle, quick-change inking devices (Flexo). Detailed Information: Footprint: Machine depth (mm): 1387 Machine height (mm): 2281 Machine length (mm): 1020 Machine weight (kg): 1075 Other Technical Features: Technological Application: Blisters, Deep-draw blisters, Trays, Pouches Substrates: Aluminum foil, Paper-backed foil, Paper, PVC, Tyvek Technical Data: Max. advance length (mm): 350 Max. printing width (mm): 298 Max. web width (mm): 310 Min. advance length (mm): 90 Min. web width (mm): 70 Resolution (dpi): 360 Max. printing speed (m/min): 35