Used Used Power Cables for sale (66,812)

Condition: excellent (used), -Dimensions: 700x600x1300mm -Model: PH401 Iisdpfjwxv T Rjx Amieb -Serial Number: 78635 -Tank capacity: 40L -3 speeds -Supplied with pallet -Year: 04-1997 Power: 2.2kW -Voltage: 400V -Overhauled equipment: The equipment is prepared upon order, pick-up and return

Condition: excellent (used), -Model: PH601 -Serial: 74094 -Year: 08-1996 -Bowl 60 litres: whisk + paddle + hook -Emergency stop button -Start button -3 speeds Iodjwxv Uuepfx Amioib -Voltage: 400V -Power: 2.6kW -Overhauled equipment: the equipment is prepared upon order, handover and return deadlines are agreed at that time (please request the price after overhaul)

Condition: excellent (used), -Dimensions: 691x1171x1593 mm -Serial number: AR100/MK1L -Model: AR100 Isdjwxv Tqecvyqi Aebd -Year: 2008 -Supplied with whisk -1 speed -Voltage: 400V Iiodpfowxv Tqjx Amiob -Power: 3 kW -Weight: 395 kg -Refurbished equipment: The equipment is prepared upon order, and the pick-up and return times are agreed at that moment (please request the price after refurbishment)

Condition: excellent (used), -Dimensions: 980x1050x1915 mm -Elevator beater -Bowl: 100 l Iisdpfewxv Tdjx Amieb -Model: PH1001DT -Delivered with 3 tools: whisk, paddle, spiral -4 speeds -Serial number: 143662 -Power: 3.7 kW -Voltage: 400 V -Weight: 600 kg -Year of manufacture: 05/04/06

Condition: good (used), Used battery charger, tested, suitable for stacker or pallet truck 24 volt. Various units in stock! Iedpfx Ajy Sm H Uomioib

Condition: good (used), Used battery charger, tested, suitable for stacker or pallet truck 24 volt. Various units in stock! Iedpfx Aoy Sm Hzemieib

Condition: good (used), Used battery charger, tested, suitable for stacker or pallet truck 24 volt. Iijdpfxsy Sm Hnj Amisb

Condition: excellent (used), - Dimensions: 1006x595x1495 mm - Power supply type: Electric - Number of clamps: 3 - Smooth surface Iedpfjwyb T Ejx Amioib - Heating plates: 3 zones at the bottom, 2 at the top - Voltage: 400V - Power: 22 kW - Weight: 358 kg - Refurbished equipment: Equipment is prepared upon order; pickup and return times are agreed at that moment (please request price after refurbishment).

Condition: excellent (used), - Model: SS064 - Serial number: 4900 - Lowering: manual or semi-automatic control - Belt width: 600 mm - Belt length: 1200 mm - 2 foldable belts - Forward / reverse control - Emergency stop Ijdpfx Amowxwmfoieib - Mobile on wheels - Voltage: 400V

Condition: used, Year of construction: 2017, machine/vehicle number: 33701917A, Weights Empty weight: 342 kg Functional Mast: articulated arm Lifting capacity: 250 kg Working height: 510 cm Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 0 m Transport dimensions (LxWxH): 1.6x0.78x1.85 Additional information Iiedpfxstr Iv Te Amiob Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2017, machine/vehicle number: 34062117A, Weights Empty weight: 342 kg Functional Mast: articulated arm Lifting capacity: 250 kg Isdjtr Irdjpfx Amijib Working height: 510 cm Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 0 m Transport dimensions (LxWxH): 1.6x0.78x1.85 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2017, machine/vehicle number: 33891917A, Weights Empty weight: 342 kg Functional Iiedjtr Irhjpfx Amijb Mast: articulated arm Lifting capacity: 250 kg Working height: 510 cm Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 0 m Transport dimensions (LxWxH): 1.6x0.78x1.85 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2017, machine/vehicle number: 34102117A, Weights Empty weight: 342 kg Isdpfx Ametr Irweioib Functional Mast: articulated arm Lifting capacity: 250 kg Working height: 510 cm Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 0 m Transport dimensions (LxWxH): 1.6x0.78x1.85 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2017, machine/vehicle number: 34052117A, Weights Empty weight: 342 kg Functional Mast: articulated arm Lifting capacity: 250 kg Working height: 510 cm Iodpfstr Iwmex Amisib Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 0 m Transport dimensions (LxWxH): 1.6x0.78x1.85 Additional information Please contact PFEIFER GROUP for more information

Year of construction: 2008, condition: good (used), Railcar, platform wagon, heavy-duty transport wagon, transport wagon, heavy-duty wagon, electric heavy-duty rail wagon, rail wagon, trailer -Manufacturer: Mechanic Maschinenbau Hahn, electric heavy-duty railcar with lifting cylinder Iisdpfx Ajlbdlzsmisb -Type: Railcar MTA, load capacity 20000 kg -Roller spacing (track gauge): 2150 mm -Cylinder spacing: 2245 mm -Lift height: 110 mm -Drive units: 2x Demag geared motors type ZBF80A 4 B020 gearbox type ADE40TD -Individual components: see photos -Overall dimensions: 2860/2440/H610 mm -Empty weight: 2200 kg

Condition: used, OKUMA POWER SUPPLY GLP 5000T E0451-521-037 Iodpoy S Dr Uofx Amieib . 2663

Condition: used, Used Molteni model MPME700SV-TDS stainless steel triple action vacuum mixer. Manufacturer: Molteni. Iisdjymaxropfx Amisb Material: Stainless steel. Capacity: Mixing pan approximately 700 litres. Type of blades: (1) high speed disperser driven by a 48kw motor, (1) high speed disperser driven by a 36.5kw motor and (1) anchor type agitator driven by a 18.5kW Exd rated motor. Also includes: Hydraulically operated raise and lower. For details about the refurbishment work, contact a member of our sales team.

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,250 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, power: 22 kW (29.91 HP), year of last overhaul: 2025, volume flow: 530 m³/h, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Isdpfx Ajy R Npismieib Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the whirling unit replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, OKUMA POWER SUPPLY 5000T E0451-521-038 Isdpjy Suyvjfx Amioib . 03487

Condition: excellent (used), 3HAC029818-001 DSQC663 HV MDU Power unit Isdpfx Ajyl Avwemieib DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: used, Used Christy Turner hammer mill model LB7. Infeed is 252mm dia by 295mm length. Unit driven by 15kW, 1460rpm motor. Rotor housing is 205mm diameter by 400mm long. Unit has mild steel blunt swinging hammers approximately 10mm thick. Includes discharge hopper. All mounted on a mild steel stand. Weight: Estimated: Lbs250.0 Dimensions: 700mm X 1450mm Iodpfsyz R Unjx Amijib

Condition: used, power: 215 kW (292.32 HP), fuel type: diesel, first registration: 05/2018, Year of construction: 2017, operating hours: 12,770 h, Used Liebherr L576 X Power wheel loader – Total weight 29,000 kg – Operating hours 12,776 – Engine 215 kW – Speed 40 km/h – Axle load distribution 15,500 kg – = Further Information = Engine displacement: 10,520 cc Unladen weight: 29,000 kg Gross weight: 29,000 kg Iedpsy Sv Hwjfx Amioib CE marking: yes Reference number: 93 Serial number: VATZ1333LZB046212 Please contact Miguel Cubas for further information. = Company Information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Condition: used, FORMAT 4 Kappa V60 Panel Saw - used - Welded frame with extremely high rigidity, automatically retracting support slats, stable locking of the saw carriage at top and bottom, control panel at eye level, digital readout on the longitudinal stop, digital display for horizontal cuts, strip cutting device, lift-roller transport system, edgable support surface, dust extraction unit TRK, dust-tested ----- Technical Data ----- Cutting length: 4,300 mm, Iijdpfjy Sazrox Amisb Cutting height: 2,200 mm, Cutting depth: 60 mm, Saw blade Ø: 250 mm, Motor: 3 kW, Extraction port Ø: 2x 100 mm, Space requirement (LxWxH): 5,600 x 1,700 x 3,000 mm

Condition: new, Edgebanding Machine HOLZ-HER 1308 XL AURIGA POWER -Showroom machine- Innovation: GLUJET GJ725 This offer concerns an equipment package. The following components and options are already included in the price: Iiedou R Sy Aopfx Amiob - Extendable workpiece support - Edge Control PPC 322 W control system - ECO MODE energy-saving mode - Jointing cutting unit FG201 with 2 milling heads - Diamond milling cutter Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation - Diamond milling cutter Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation - Edge feed 1903 - Glue application system Glu Jet GJ725 NC PUR PRO - Pressure unit 1912-3 pneumatic - End trimming unit 1918 pneumatic 60 mm - Multifunctional milling unit FR301 MOT6 - Diamond milling cutter Ø 56/60 mm, left-hand rotation - Diamond milling cutter Ø 56/60 mm, right-hand rotation - Corner rounding unit FF301 MOT1 - Scraper unit ZK301 MOT4 incl. high-gloss package - Carbide reversible knives for scraper carrier - Chip collection box for scraper unit - Buffing unit 1940 - Spray device TR301 for infeed and outfeed areas - Motorized pressure bridge adjustment - iTronic-adaptive pressure and glue quantity control - Extended infeed fence 1,252 mm - Motorized adjustment for infeed fence - Pressure unit DW301 with motorized NC axis - Extraction hoods for end trimming unit 1918 - Shelving program - Surface scraper FK701 - Spray device GM301 after the pressure unit - new showroom machine -

Condition: excellent (used), Wide Belt Sander FORMAT 4 Finish 1302 -used- Constant working height due to upper part adjustment, Combination unit with contact roller and sanding pad, Rubber-coated contact roller, Pneumatic activation of the contact roller, Electronic segmented sanding pad, Digital display for sanding height, Ijdoxnm Rcspfx Amioib Infinitely variable feed speed, Automatic belt centering, Operation via touchscreen display, Air-cushioned sanding pad, Sanding belt oscillation ----- Technical Data ----- Working width: 1,300 mm Number of belts: 2 units Sanding belt dimensions: 1,310 x 2,200 mm Feed speed: 3.7–16 m/min Segment width sanding pad: 55 mm Max. workpiece thickness: 170 mm Min. workpiece thickness: 5 mm Extraction port Ø: 2x200 mm Motor power: 18.5 kW Second motor power: 15 kW Dimensions (LxWxH): 1,950 x 2,250 x 2,600 mm Weight: 2,400 kg Quality Information: - Belt tracking / balance checked - Sanding pad checked / refurbished - Height adjustment checked - Thorough basic cleaning - Electrical system checked - Immediately ready for use