Used Uhp Pressure Cleaner for sale (15,029)

Condition: new, machine/vehicle number: G-CL-270-FN-EC-EX, functionality: fully functional, input voltage: 230 V, volume flow: 270 m³/h, noise level: 61 dB, total height: 755 mm, total length: 400 mm, total width: 500 mm, overall weight: 60 kg, ISI G-CLEANER - ATEX Mechanical air filter device (without intake plate / separate determination) Type: 270 FN Version: Mobile Control: without ATEX: "e" II 3 G Zone 2 Nsdpevrykhjfx Abkewh Horizontal, mobile mechanical air cleaner with EC radial fan for separating gas in the EX area. TECHNICAL DESCRIPTION: Air volume: - 320 m³/h (free blowing) - 240-270 m³/h (effective) (depending on the filter configuration without capture elements) Air inlet: exhaust air sound box at the rear (optionally 1x100mm / 2x80mm / 4x50mm) Filter configuration: - aluminum mesh coarse filter - Z-Line filter F9 - activated carbon cassette with pressed, specially impregnated shaped carbon ATEX: Group II Gas/dust Fan: according to ATEX II 2G Exh IIB T4 Gb Temperature class: T4 > 135°C Fan: device category 2 Filter system: device category 3 All electrical components are supplied in explosion-proof design. Color: RAL 7035 light gray (optional: special color) Voltage: 230 V Frequency: 50 Hz Protection class: IP54 Fan technology: energy-saving EC technology Air output: not adjustable Noise level: 61 db (A)) Dimensions: length 400 mm / width 500 mm / height 755 mm Weight: 60 kg

Condition: new, machine/vehicle number: S-CL-100-FN-EC, functionality: fully functional, input voltage: 230 V, volume flow: 134 m³/h, total height: 475 mm, total length: 250 mm, total width: 250 mm, overall weight: 17 kg, Equipment: type plate available, ISI S-CLEANER Mechanical air filtration unit (solder fume) for up to 1 workstation Type: 100 FN Version: conditionally mobile (glide runners/no wheels) Control: none Horizontal, conditionally mobile mechanical air purifier with EC- radial fan for the separation of solder fumes. TECHNICAL DESCRIPTION: Air volume: - 134 m³/h (air flow rate) - 100 m³/h (effective air capacity) (depending on the filter assembly, without collecting elements) Suction nozzle: NW 50 mm (rear) Filter assembly: Nedpfx Aswpu Twobkjwh - Pre-filter - HEPA filter H13 - Activated carbon cassette (refillable) Color: RAL 7035 light gray Voltage: 230 V Frequency: 50 Hz Protection class: IP54 Fan technology: energy-saving EC technology Air capacity: not adjustable Dimensions: Length 250 mm / Width 250 mm / Height 475 mm Weight: 16.5 kg

Condition: new, machine/vehicle number: G-CL-350-FR-EC, input voltage: 230 V, volume flow: 350 m³/h, noise level: 61 dB, total height: 600 mm, total length: 430 mm, total width: 340 mm, overall weight: 40 kg, ISI G-CLEANER Mechanical air filter device Type: 350 FR Version: Mobile Control: without Horizontal, mobile mechanical air cleaner with EC radial fan for separating gaseous substances. TECHNICAL DESCRIPTION: Air volume: - 390 m³/h (free blowing) - 350 m³/h (effective) (depending on the filter configuration without capture elements) Air inlet: top rear with 4 connections 50 mm Filter configuration: - Pre-filter mat F 5 - HEPA filter H13 according to DIN EN 1822-1 - Activated carbon cassette with 9 kg of pressed, specially impregnated shaped carbon Nwjdpevrygpjfx Abkoh Color: RAL 7035 light gray (optional: special color) Voltage: 230 V Frequency: 50 Hz Protection class: IP54 Fan technology: energy-saving EC technology Air output: adjustable Noise level: 61 db (A) Dimensions: length 430 mm / width 340 mm / height 600 mm Weight: 40 kg

Condition: new, machine/vehicle number: D-CL-440-FR-EC, functionality: fully functional, input voltage: 230 V, volume flow: 450 m³/h, noise level: 58 dB, total height: 1,430 mm, total length: 450 mm, total width: 550 mm, overall weight: 50 kg, Equipment: rotational speed infinitely variable, type plate available, ISI D-CLEANER Mechanical air filter device (dust) Type: 440 FR Design: Mobile Control: without Horizontal, mobile mechanical air cleaner with EC radial fan for dust separation. TECHNICAL DESCRIPTION: Air volume: - 450 m³/h (free blowing) (depending on the filter configuration without collection elements) Nwjdpfx Absvrxc Aokjh Air inlet opening: baffle plate as pre-separator Intake nozzle: 100 mm (on the left side) Filter configuration: - filter cartridge (dust class M according to DIN EN 60335-2-69 Appendix AA) - compressed air cleaning via rotary vane nozzle Color: RAL 7035 light gray (optional: special color) Voltage: 230 V Frequency: 50 Hz Protection class: IP54 Fan technology: energy-saving EC technology Air output: adjustable Noise level: 58 db (A)) Dimensions: length 450 mm / width 550 mm / height 1430 mm Weight: 50 kg

Condition: new, machine/vehicle number: S-CL-250-FN-EC, functionality: fully functional, input voltage: 230 V, volume flow: 250 m³/h, total height: 600 mm, total length: 340 mm, total width: 430 mm, overall weight: 35 kg, Equipment: type plate available, ISI S-CLEANER Mechanical air filter device (soldering smoke) for up to 2 workstations Type: 250 FN Version: Mobile Control: without Horizontal, mobile mechanical air cleaner with EC radial fan for separating soldering smoke. TECHNICAL DESCRIPTION: Air volume: - 240 m³/h (volume flow) - 170 m³/h (effective air output) (depending on the filter configuration without collection elements) Intake nozzle: 2 x NW 50 mm (rear) Filter configuration: - Pre-filter G4 - HEPA filter H13 - Activated carbon cassette (2.5 kg, refillable) Color: RAL 7035 light gray (optional: special color) Nodpfx Asvrylfobkswh Voltage: 230 V Frequency: 50 Hz Protection class: IP54 Fan technology: energy-saving EC technology Air output: not adjustable Dimensions: length 340 mm / width 430 mm / height 600 mm Weight: 35 kg

Condition: new, machine/vehicle number: C-CL-360-FR-EC, functionality: fully functional, input voltage: 230 V, volume flow: 390 m³/h, noise level: 58 dB, total height: 1,190 mm, total length: 900 mm, total width: 550 mm, warranty duration: 12 months, Equipment: type plate available, ISI C-CLEANER Mechanical air filter device Type: 360 FR Design: Mobile Control: without Horizontal, mobile mechanical air cleaner with EC radial fan for separating gas and solids. TECHNICAL DESCRIPTION: Air volume: - 390 m³/h (free blowing) - 360 m³/h (effective) Nodpjvrw T Hofx Abkowh (depending on the filter configuration without capture elements) Air inlet: with baffle plate as pre-separator Filter configuration: - Filter cartridge made of polyester fleece (dust class M) - Pre-filter mat G4 - Suspended matter filter H13 - Activated carbon cassette refillable with 3 kg In order to achieve a consistent suction power, the filter cartridge can be cleaned at regular intervals using compressed air via a ball valve. Color: RAL 7035 light gray (optional: special color) Voltage: 230 V Frequency: 50Hz Protection class: IP54 Fan technology: energy-saving EC technology Air output: adjustable Noise level: 58 db (A)) Dimensions: length 900 mm / width 550 mm / height 1190 mm

Condition: used, Parts cleaning system from renowned Austrian company Nsdpfx Abevcrutekowh Machine comes from company liquidation, was in operation until the end. Cleaning agents are included.

Year of construction: 2018, condition: excellent (used), - volume flow: up to 1200 m³/h - elektric: 3-Ph. 400 V - 50/60 Hz - power: 1,5 kW (IE3) - current: 2,3 A Nedpog Ipn Tofx Abkewh - protection class: IP54 - noise: 70 dB

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. Nedpfx Aofz Dvvsbkewh ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. Nodefz Ax Sepfx Abkjwh High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control Nsdpfx Asflpmqsbkswh • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit Nwsdefzrapspfx Abkoh • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps Nodpsfz A D Nsfx Abkswh The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: new, Year of construction: 2025, Technical Parameters Model: RST-FLC-2000W/3000W Laser: Raycus fiber laser Nwsdpfewznqgsx Abksh Laser power: 2000W / 3000W Laser wavelength: 1064nm Frequency: 10–50 kHz Cooling method: Water cooling Cooling water: Deionized water Water temperature: 23–26°C Net weight: 160kg (2000W) / 200kg (3000W) Dimensions: 98 × 122 × 143 cm Total power: 2000W / 3000W Scan width: 10–80 mm Mode of operation: Handheld or automatic Operating temperature: 0–40°C Price Fiber Laser Cleaning Machine RST-FLC-2000W/3000W Connection: 230V / 380–400V – 3PH 50Hz RAYCUS 2000W (230V)……….€12,500 RAYCUS 3000W (380V)……….€15,500

Condition: new, Year of construction: 2025, RST-LC1500 Advantages of the 2D Ultra-Wide Laser Cleaning Machine: A: 600–800 mm wide cleaning with ultra-wide coverage. B: Equipped with imported high-performance SOC controller. C: Various selectable 2D cleaning patterns; 14 languages available. D: Complies with European safety standards; triple safety mechanisms. E: Equipped with multiple parameter databases tailored to various operating conditions. F: High-protection safety design. G: Easy maintenance and long-term stable operation. Machine Technical Specifications: Power supply 220V 50Hz/60Hz Output power ≤5.5 kW Operating temperature 10–40°C Cleaning area Cleaning width ≤ 800 mm Cooling method Air cooled Focal length 500/800/1000 mm Weight of laser cleaning head 900 g Laser safety class Class 4 Nwedpfx Abew Ix Dpekeh Machine dimensions 640 × 330 × 620 mm Machine weight 46 kg Packaging dimensions 850 × 650 × 900 mm Package weight 88 kg Laser Generator Specifications: Parameter name Specification Laser generator model MFSC-1500M Power adjustment range 10%–100% Laser wavelength 1080 nm Modulation frequency 1–5000 Hz Output power instability ±1.5% Optical fiber cable length 10 m Machine Configuration: Component name Brand Description Machine body DPL Professional cleaning cabinet Laser generator MAX MFSC-1500M Laser head Hydraulic / Brand 2D Super Wide Angle Chiller system Bingyue 1500W-S Price: RST-LC 1500W (230V).....€9,500 Warranty: Two-year warranty on the laser source, One-year warranty on other machine components. No warranty on consumable parts. OPTION: TERMS AND CONDITIONS Training and Installation: 1 day €600 (incl. arrival and departure) Transport Costs: Air freight: €1,200 / Sea freight: €650 Delivery: 2–3 working weeks after payment receipt for air freight 5–6 weeks by sea freight Payment: 100% due upon order and before shipping (air cargo or by sea)

Condition: ready for operation (used), functionality: fully functional, total length: 1,100 mm, total width: 1,300 mm, total height: 1,600 mm, input voltage: 380 V, load capacity: 500 kg, empty load weight: 550 kg, Equipment: documentation/manual, Chamber washing system with rotary rack. Max. workpiece weight 500 kg, basket size 74x74 cm, max. workpiece height 66 cm. Includes loading trolley and cleaning powder. Operating manual available. Njdpfxeymggvo Abkewh

Condition: new, FSCUT Ethercat CNC Control System DELTA Ethercat Servo Driver & Motor System Hiwin Guide Liner Nodpsnr Hcwjfx Abkowh SMG / KH Rack Raytools / BLT Series Cutting Head Laser source 6kW HanLi Chiller Gross weight around 9.5ton Optional: bevel cutting for sheet

Condition: used, Marvel Townsend StorkDMM50 meat bone separator to produce best quality low pressure deboned meat when used in conjunction with a Baader or SEPAmatic. This machine has come direct from a closed meat factory in Scotland. Almost impossible to find these machines on the used market. Nedpfxslkc I Ro Abkewh

Condition: good (used), Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuums, floor vacuums, safety industrial vacuums -Manufacturer: Allaway, industrial vacuum cleaner, central vacuum cleaner without motor Njdezg U Awopfx Abkewh -Type: Manta APC 3 -Dimensions: 600/550/H1970 mm -Weight: 86 kg

Condition: good (used), Centrifugal pump, water pump, stainless steel pump, food-grade pump, vertical centrifugal pump, multi-stage vertical centrifugal pump, pressure booster pump, pressure intensifier pump -Manufacturer: Lowara, Multi-stage vertical centrifugal pump -Type: 5SV07F022T -Motor: 2.2 kW / 2860 rpm -Protection class: IP55 Nwedszg Dmxopfx Abkeh -Flow rate: max. 8.5 m³/h -Number: 2x pumps available -Price: per piece -Dimensions: 250/210/H685 mm -Weight: 30.2 kg

Condition: good (used), Centrifugal pump, water pump, domestic water pump, garden pump, high-pressure centrifugal pump -Manufacturer: WILO, High-pressure centrifugal pump type Helix V1008-1/16/E/KS/400-50 -Power: 3 kW -Flow rate: l/h -p max: 16 bar -Number: 2x pumps available -Price: per piece Nwjdpfx Ajwyaryjbkeh -Dimensions: 250/240/H950 mm -Weight: 47 kg/unit

Condition: used, Manufacturer: OspreyFrank Model: iSteam iS18 Type: Dry steam cleaner Steam pressure: 8 bar Steam temperature: approx. 180 °C Nedpszf U Ausfx Abkswh Power: 3500 W Voltage: 230 V Condition: used

Condition: good (used), Water jet high-pressure pump, high-pressure pump for water jet cutting, water jet cutting, water jet cutting system -Manufacturer: Deter Fluidtechnik, high-pressure pump for waterjet cutting with water tank and feed pump -High-pressure pump: Type PP1205/110V -Centrifugal pump: Calpeda NM 1/AE -Container: Stainless steel -Individual components: see photos -Dimensions: 1580/410/H600 mm Nwodjzfgb Ajpfx Abkoh -Weight: 118 kg

Condition: ready for operation (used), RINGLER Industrial vacuum cleaner Type: AT-D 4.0 kW Device no.: 96231 Year of manufacture: 1989 Equipment: - Suction hose, new - Chassis - Documentation Nwsdpfx Aoxc Eq Rebksh

Year of construction: 1998, condition: excellent (used), Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower, exhaust fan -Manufacturer: Nedermann, radial fan pressure blower -Type: 520929 Ø 420 mm -Motor power: 1.5 kW / 2800 rpm -Volume flow rate: m³/min -Inlet connection: Ø 155 mm -Outlet connection: Ø 155 mm -Fan wheel: Ø 420 x 30 mm -Dimensions: 630/4300/H680 mm Nedpfxozd S Eqs Abkewh -Weight: 24 kg