Used Twist Drill for sale (5,170)

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany, Uelzen 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert Blodpfx Aoxppwnodxjp 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33244 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: ready for operation (used), Alzmetall AB3ESV Pillar Drill Tool Holder: MT 3 Drilling capacity in steel (Ø): approx. 30 mm Throat (spindle to column/table): approx. 290 mm. Quill stroke (spindle stroke): about 160 mm. Speed range: e.g. 55 – 1,450 rpm (steplessly adjustable) as specified. Alternative specification: speed range up to approx. 1,850 rpm. You are welcome to arrange a viewing appointment. We can also organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop and check out our other offers as well. All company names and trademarks mentioned are the property of their respective owners and are used strictly for identification and description of the products. Bsdpjxufknofx Adxolp Deviations from technical data and errors in the item description may occur and are reserved.

Condition: good (used), Year of construction: 1993, machine/vehicle number: 1117-C, Offer 25330 Technical data: - Drilling capacity in steel ST 60: 50 mm - Drilling ability in steel ST 60: 55 mm - Drill spindle taper: MK 4 - Drill spindle stroke: 230 mm - 9 spindle speeds: 54 - 1032 rpm - 4 feeds: 0.1 - 0.4 mm/rev Bjdoxr A Sqepfx Adxjlp - Throat depth: 370 mm - Max. distance table – drill spindle: 650 mm - Max. distance machined base plate – drill spindle: 1140 mm - Table with 2 T-slots: 650 x 550 mm - Table height adjustment via rack and pinion with handwheel - Table tiltable to left and right - Drive: 400 V / 3.0 kW - Space requirement approx.: W 700 x H 2400 x D 1000 mm - Weight approx.: 700 kg - Including: reversible operation (right/left), lighting

Year of construction: 2019, condition: used, New: No Field of application: Construction Serial number: TMG19SEDO186/8992 011xxxx Please contact ATS Norway for more information Please provide reference number upon request: 18688 Specifications: 2019 model Engine hours: approx. 5,100 Hammer hours: approx. 1,700 Power: 116 kW Blsdpfxoxivxlo Adxjp Weight: 10,500 kg Undercarriage (see pictures) Machine width: approx. 230 cm Winch Undercarriage replaced in 2024 L5 GPS system Grinder Hammer serviced by Epiroc Description:2019 Epiroc T30R drill rig equipped with L5 GPS system.Undercarriage was replaced in 2024.Hammer service performed by Epiroc, engine serviced in-house every 250 hours.Available for prompt delivery. Own weight: 10500 Total Weight: 10500 Width: 230 Kw: 116 Hammer hours: 1620 Engine hours: 4890 Model: FlexiRoc

Condition: used, operating hours: 20 h, Fuel type: Diesel Blsdpfouu Df Dox Adxep

Condition: good (used), A used high-speed radial drilling machine Fab.DONAU Type: DR 32 with vice. The machine operates in all directions. The clamping to the right and left is weak. Therefore, we are selling the machine at a favorable price. Bljdpjwn Ex Uefx Adxop

Condition: good (used), axle configuration: 2 axles, suspension: air, color: green, Year of construction: 1990, General information Year of manufacture: 1990 Axle configuration Bledpfx Asxfla Rjdxsp Make axles: BPW Brakes: drum brakes Suspension: air suspension Weights Empty weight: 7.920 kg Carrying capacity: 24.080 kg GVW: 32.000 kg Condition Technical condition: good Visual appearance: good Additional information Please contact Pedro, Arie, Pedro, Arie, Pedro or Arie for more information

Condition: good (used), Machines pictures 1 to 9 Gillardon price 9500,-€ Technical data: - Drilling capacity into solid steel ST 60 32 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 27 - Drill spindle holder MK 4 Blodpfx Aeu Nm Nisdxop - Quill stroke 150 mm - 12 drill spindle speeds 102 - 2000 rpm - 3 drilling feeds 0.1 - 0.3 mm - min. / max. distance spindle - table 310 / 610 mm - Drilling radius min / max 400 / 1200 mm - Table height 720 mm - Table size 1200 x 500 mm - Drive 400 V / 1.6 / 2.9 kW - Space requirement approx. W 1200 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the rear side of the machine Machine 2 pictures 10 to 15 HKS 34 MT Price 16.500,-€ Drilling capacity 45mm Table size : 1200 x 560 mm drilling capacity 45mm Spindle holder MK 4 quill stroke 170mm Speed / steps 70-2000 rpm Feed rate / steps 0.1 0.2 0.3mm/rev Motor 2.9 KW

Condition: used, Drills from 29 mm Drills up to 50 mm Reamers up to 39.6 mm Blodpfxexpqv Se Adxep

Condition: used, Year of construction: 1989, Please contact ATS Norway for more information Please provide reference number upon request: 21250 Specifications: 1989 model Hours: 5520 Hammer is working Needs a new battery Winch and vacuum are working according to the owner Ready for delivery. Own weight: Engine hours: 5520 Model: 712HC-01 Bedpfx Aow Ucm Ujdxelp

Condition: used, Year of construction: 1987, Work table 750mm x 1200mm Arm travel 800mm Tool holder MK 3 Drilling capacity 28mm in steel Thread cutting device Coolant system Bljdpfexpfhvex Adxop Documentation

Condition: excellent (used), For sale: professional German paper multi-spindle drill HANG 106 DTK 20. Industrial-grade equipment, ideal for bookbinding shops, printing houses, or the production of binders and calendars. Model: HANG 106 DTK 20 Manufacturer: Constantin Hang Maschinenfabrik Göppingen Number of spindles: 4 Drilling diameters: • Cardboard/paper: up to 3.0 mm • Material samples: 2.5 mm / 6.0 mm / 12.0 mm Drive: PRYM Getriebebau geared motor, 50/60 Hz Stable cast iron construction Adjustable work table Complete machine, ready for operation Bljdpfx Asudl Anodxep Technical condition: very good. Used but well-maintained, no play, with original nameplates and operating documentation.

Condition: excellent (used), CATALOG NUMBER 6059 TECHNICAL DATA - Number of horizontal spindles: 2×20 pcs - Number of vertical spindles: 1×20 pcs - Distance between the outermost spindles: 610 mm - Distance between spindles: 32 mm Bjdsgq I I Espfx Adxjlp - Feed cylinder stroke: 60 mm - Max length of workpiece: 3400 mm - Horizontal spindle adjustment: up/down, front/back - Vertical spindle adjustment: right/left - Each drilling unit can operate independently - Right/left drill bits, threaded mounting (screw-in) - 3 pneumatic clamps - Motor power: 4×1.85 kW - Air requirement: 6-8 bar - Dimensions (L/W/H): 4600x1180x2200 mm - Weight: approx. 1500 kg Net price: PLN 12,900 Net price: EUR 3,070 depending on exchange rate, reference 4.2 EUR (Prices may vary depending on exchange rate fluctuations)

Condition: used, empty load weight: 6,190 kg, maximum load weight: 32,810 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 11/2024, next inspection (TÜV): 11/2025, loading space length: 13,600 mm, loading space width: 2,470 mm, loading space height: 1 mm, suspension: air, tire size: 385/65R22.5, color: black, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3 axles, air suspension, first axle liftable, raising and lowering function, ABS (anti-lock braking system), lashing rings, container locks, side underrun protection, support legs, tool box, stanchions. Body: 3-axle platform semi-trailer with drop-in stanchions and twist-locks for transporting 20/2x20/40 ft containers. 3x 9t Krone axles, disc brakes! Loading height approx. 1290 mm! New price approx. €33,000. ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale and errors excepted! Bedoxqn Nfjpfx Adxslp

Condition: excellent (used), Year of construction: 2022, operating hours: 100 h, functionality: fully functional, The grinding machine was purchased by us in 2022 and was in operation for five months. Bodoxrkqhjpfx Adxelp This grinding machine greatly helped us to be independent from external service providers. The deep hole drills could now be quickly re-sharpened in-house, which also saved us a lot of money. The necessary grinding wheels, some of them new, are included in the delivery.

Condition: used, Year of construction: 2010, operating hours: 3,030 h, Please contact ATS Norway for more information Please provide reference number upon request: 18549 Specifications: Model year: 2010 Hours: Approximately 3030 hours Power: 55 kW Weight: Approximately 8000 kg Chassis: See pictures Belt width: Approx. 40 cm Engine: Deutz diesel engine Undercarriage commutation Winch Hydraulic water pump Remote control Toolbox Stabilizing legs Description: 2010 Comacchio MC500 drilling rig with only 3030 hours on the counter. The rig works as it should, but is missing an emergency stop wire. It can drill both horizontally and vertically, and is delivered quickly. Hours: 3030 Own weight: 8000 Total Weight: 8000 Kw: 55 Model: MC 500 Bedpsvgy E Usfx Adxolp

Condition: used, Year of construction: 1991, Work table 600mm x 1200mm Column travel 600mm Tool holder MK 3 Drilling capacity 28mm in steel Tapping device Coolant system Bedoxpfglspfx Adxelp Documentation

Condition: excellent (used), I sell a HANG 106DTK paper drill, operational in good condition. There are several Hang drills on offer. Blodpfx Aeudpc Sedxop

Condition: used, Year of construction: 1990, functionality: fully functional, throat depth: 360 mm, spindle speed (max.): 1,420 rpm, spindle speed (min.): 93 rpm, drilling capacity: 32 mm, drilling depth: 200 mm, table width: 560 mm, table length: 480 mm, overall weight: 570 kg, Morse taper: 4 Drilling capacity: Ø32 mm. (st. 60 kg./mm2). Quill travel: 200 mm. Throat/reach: 360 mm. RPM.: 93-1420. Blsdpfx Adsxpfz Njxsp Table size: 560 x 480 mm. Automatic feed: Ja Motor: 1,5 HK. Year: 1990 Country of origin: Spanien. Size (L x W x H): 550 x 1000 x 2350 mm. Weight: 570 kg. With automatic feed, integrated coolant system in base and turning/tilting table. All our machines are tested and serviced before delivery.

Condition: used, Drill sleeve MK 4 Bodpjb Tyqaefx Adxelp Length 170 mm Diameter 63 mm

Condition: good (used), Year of construction: 1984, Multi-spindle head, multi-spindle drill head, drilling gear -Joint multi-spindle head -Max. x drill Bodpfjdym D Tex Adxolp -7x drill built-in collet: mm -min. Distance drill: mm -Weight: 11.3 kg Articulated multi-spindle heads are: variable tools for various machining operations such as drilling, thread cutting, countersinking, reaming, milling, turning, with which several holes can be machined at once.

Condition: used, Year of construction: 2005, Serial number: 1xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21280 Specifications: 2005 model 16,457 engine hours 9,610 drilling hours Weight: 8,500 kg KW: 88 Steel tracks Bsdpfxoxbbcge Adxslp Winch Description:Nemek 407 TS drilling rig for sale on behalf of customer – a versatile rig for drilling e.g. energy and water wells.The rig is described as operational but in need of minor service. Own weight: 8500 Engine hours: 16457 Model: 407 TS

Condition: like new (used), Year of construction: 2021, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design • Work table 1800 x 600 mm with 4T-slots • Boom travel 1050 mm • Drill spindle SK 40 with tool clamping device • Stepless speed programming • Stepless spindle feed via three-phase servo motor • 2 T-slots 18 mm on the machine base frame at the back • 2 T-slots 18 mm on the machine base frame on the left • Thread cutting device • Central lubrication • Coolant device • Machine light • CE marking • Safety device • USB interface Dimensions and travel paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Spindle stroke (Z axis) mm 200 Column stroke (W axis) mm 410 Distance from lower edge of spindle - min mm 70 Top edge of table max. mm 680 Distance from bottom edge of spindle - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Work table height mm 900 Cutting values Drilling performance into solid material St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 – 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feeds continuously variable mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen backlit, easy to read from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental dimensions, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Bedpfx Aoxn A Spedxelp Tool management: max. 500 tools Sub-program technology: yes Machining cycles Standard software options: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually probing the workpiece for: - any rectangular parts clamped - any round parts clamped - transfer of cast and burnt parts - angular position detection for round parts by probing reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: good (used), I SELL FEIN PS 50 MAGNETIC DRILL. IN VERY GOOD CONDITION. Bsdpfxoulc Tuo Adxjlp

Condition: excellent (used), 10 x deep hole drills make Botek 3 pieces 6,5 x 320 mm 2 pieces 10,2 x 190 mm 3 pieces 10,4 x 250 mm Bljdpfx Ajhl Awdsdxjp 1 piece 1 x 11 x 350 mm 1 piece 11 x 270 mm Weight 1,5 kg