Used Tube Benders for sale (2,797)

Condition: new, Cesurbend Mandrel Bending Machine/Tube Bending Machine PBNC-65 A Technical Specifications Max. tube diameter (mild steel) 63 mm Ledpfx Aasxvzt Uj Eshr Max. wall thickness (mm) 3 Max. bending angle (°) 190 Tube bending speed (d/min) 7-10 Max. hydraulic pressure (bar) 200 Max. bending radius (mm) 250 Min. bending radius (mm) 45 Tube length (mm) 4000 Bending tolerances (mm) ±0.25 mm Bending motor power (kW) 7.5 Hydraulic motor power (kW) 4 Oil tank capacity (l) 50 Machine width (mm) 1500 Machine length (mm) 6200 Machine height (mm) 1500 Machine weight (kg) 2000 Features • The machine is equipped with 5 cylinders • On our standard NC machines, positioning and rotation after bending are achieved using the operator assistance and parallelism device. • You can bend faster and error-free by monitoring the progress and rotational positions of bends carried out with our machines equipped with an NC Car System.

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 6,000 W, travel distance X-axis: 6,000 mm, positioning speed: 100 m/min, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, total length: 6,000 mm, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, fume extraction, nozzle changer, safety light barrier, 3 Chuck Professional pipe laser cutting machine (GS-6022HG) Working area (L/W): 6000mm*φ220mm Repeat positioning accuracy: ≤0.03mm Max. positioning speed: 100m/min Max. acceleration: 1.0G Max. rotating speed of chuck: 110r/min Machine weight: 10T Ljdpfx Aajvrwt Ts Eohr Round pipe: Φ15mm-Φ220mm Square pipe: 15mm*15mm ~ 150mm*150mm Rectangular pipe: 30*20mm~160*80mm Oval tube/flat oval tube: Short axis≥15mm, long axis≤210mm Channel steel: Max 20# I-beam: Max 18# H steel: Max 175*90mm Supports high-precision cutting of round tubes, square tubes and special-shaped tubes. Flexibly adapts to different specifications of tubes.

Condition: used, Year of construction: 2021, MARINI-ERMONT TSM17 asphalt plant drum tube: Drum thickness: 10mm, Cone thickness: 12mm, Large end diameter: 2,100mm, Drum diameter: 1,700mm, Length approx. 11,000mm, 2 bearing rings, Radiation-proof blades in A42CP steel, Curtain blades: HARDOX 400, Recycling ring, Burner face, 4 gear motors IE3 standard + rollers. The tube was commissioned in January 2022 and decommissioned in November 2023. Ledpfx Aajxf T Ucs Eshr

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, pipe diameter (max.): 127 mm, bending angle (max.): 182 °, bending radius (max.): 400 mm, mandrel length: 4,000 mm, overall weight: 16,000 kg, total length: 7,000 mm, total width: 2,200 mm, total height: 1,800 mm, input voltage: 400 V, type of input current: three-phase, feed length Z-axis: 4,000 mm, wall thickness: 5 mm, Equipment: documentation/manual, Capacity, Ø mm / 127 x 5 Radius, min./max. / 50/400 Lodsu Rf E Espfx Aa Eohr Bending speed/repeatability / 40º/s. ±0,1° Mandrel length 4 000 Weight, kg 16 000 Motor kW / 40 Length feed 900 mm/sec Degree of tolerance 0.05-0.1°/mm Tools: 63 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, laser power: 100 W, laser wavelength: 1,070 nm, empty load weight: 1,200 kg, number of axes: 4, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Fibre Laser: Power: 100 W Wavelength: 1070 nm Number of axes: 4 MACHINE DETAILS Dimensions & Weight Machine dimensions (L x W x H): 160 x 140 x 170 cm Machine weight: 1,200 kg Bar Feeder Model: Iemca Elite 112 / Type: 32LL Bar feeder year of manufacture: 2010 Bar feeder dimensions (L x W x H): 420 x 60 x 140 cm Bar feeder weight: 500 kg EQUIPMENT Lodpfx Aoxtmx Dea Ejhr Iemca Elite 112 bar feeder

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, Machineseeker – Trumpf TubeLaser 3000 – Ebertz Under 3,000 Laser Hours Fiber Tube Laser – Immediately Available Manufacturer: TRUMPF Model: TruLaser Tube 3000 fiber (T10) Year of Manufacture: 2020 Machine Number: A044D0013 Operating hours, approx.: 2,750 h (Laser on) TECHNICAL DATA: Max. outer diameter round tube: 152 mm (170 mm with jaw set) Max. circumscribed diameter rectangular tube: 170 mm Max. raw material length for automatic loading: 6,500 mm Machine bed for 6.5 m raw material length Max. finished part length: 4,500 mm Max. workpiece weight per meter: 18.5 kg (120 | 148[3] kg total) Laser: TruFiber 2001 – 2 kW (average power consumption 6 kW) Max. material thickness: - Mild steel: 8 mm - Stainless steel: 4 mm - Aluminum: 4 mm - Copper/Brass: 3 mm EQUIPMENT: - Through-feed chuck with self-centering clamping rollers - Workspace lighting - Feed station with self-centering jaws - Tube support (raw material) with automatically retractable rests - Tube support (finished parts) with extendable guide rollers - High-precision drives - Adaptive clamping technology for through-feed chuck - Eject station for 3 m finished part length (including scrap container) - Parts storage tray TRUMPF Laser • Excitation via pump diodes • Laser power control • Logbook function for laser • Enclosed beam guidance via laser light cable (LLK) Cutting Head • Lens cutting head with 150 mm focal length • Magnetic coupling Controller • TRUMPF controller based on Sinumerik 840D SL • Integrated technology data • Automatic on/off function • Tiltable operator panel with 19" touchscreen • Condition Guide • Remote support interface • Programmable cutting gas pressure Functions • AdjustiLine • NitroLine • FocusLine • ControlLine Data Transfer - Online Update Manager - RJ45 network interface - USB interface - Wireless Operation Point - Central Link Safety - CE Marking (ex works) - Single and dual beam safety light curtains - Monitoring system for gas pressure, temperature, and cooling water - Protective cabin with laser safety windows EXTENDED STANDARD EQUIPMENT: • Solid-state laser TruFiber 2001 • Machine bed for 6.5 m raw material length • LoadMaster Tube for 6.5 m raw material length • Laser chiller (water-air) • Compact exhaust system Machine Accessories • Initial set of cutting nozzles • Ceramic part (1 piece) • Jaw set up to D152 mm/D170 mm • Guide rollers for round and rectangular tubes Lhodpfoxn Tn Iox Aa Esr SPECIAL EQUIPMENT: - Increased finished part length (+1.5 m) including additional finished part support - SeamLine Tube with inner detection, weld seam detection on both inner and outer tube surfaces - Low-scratch LoadMaster Tube design, plastic rollers and strips - Adaptive clamping technology – feed station with additional clamping elements for clamping L and U profiles as well as flat material - MobileControl App This used machine can be viewed under production conditions. All information provided without guarantee – sale excluding any warranties or liability and exclusively in accordance with our General Terms and Conditions of Sale and Contract. Subject to prior sale.

Condition: new, Cesurbend CNC Tube and Pipe Bending Machine PBNC-51 A Technical Specifications Max. Tube Diameter (Mild Steel): 51 mm Max. Tube Wall Thickness (mm): 3 Max. Bending Angle (°): 190 Tube Bending Speed (rpm): 7–10 Max. Hydraulic Pressure (bar): 200 Max. Bending Radius (mm): 250 Tube Length (mm): 4000 Bending Motor Power (kW): 5.5 Hydraulic Motor Power (kW): 3 Machine Width (mm): 1300 Machine Length (mm): 5750 Machine Height (mm): 1500 Machine Weight (kg): 2000 Features Lhsdpfxoxvzr Rs Aa Eer • On our standard NC machines, distance and rotation after bending are handled via operator assistance and parallelism devices. • Using our machines equipped with the NC Car System, you can monitor bend progress and rotational positions, enabling faster and error-free bending.

Condition: like new (used), Year of construction: 2021, operating hours: 8 h, functionality: fully functional, type of input current: three-phase, 2011 Rigao Machinery Corp Plastic/PE/Laminated Tube Labeller and Tube Filler & Sealer with Cooler This machine is in "as new " condition only running a few thousand tubes for commissioning. It was purchased for a specific purpose, which did not materialise. The system can be run separately (labeller and Filler/Sealer) or as one continuous line. Comes with original tool kit, spares and the option of a 12 month warranty through a UK Based Rigao Specialist. This same company could potentially commision the machine if required (price on application). Plastic/PE/Laminated Tube Filler and Sealer with Cooler ○ The machine is used to fill and seal plastic tube, capable of tube loading, tube code registering, filling, hot air sealing, code printing, trimming and feeding off line a finished tube. ○ Machine contacting parts are made of 316L stainless steel which is clean and sanitary. ○ With a built in safety device, the machine will be shut down if the door is open. There is also an overload protection provided. Parameter Filling volume 5-250ml（by changing different filling system） Filling accuracy ≤±1% Capacity 1800-2400pcs/hour (Depend on tube size and product viscosity） Tube diameter ф13-50mm (by changing tube tooling – 35, 40 & 50mm tooling available). Tube length 210mm (Max. Length) Hopper volume 40 L Power 380V /50Hz 3Phase Air pressure 0.5-0.7MPa Equipped motor 1.1 Kw Plastic/PE/Laminated Tube Labeller with Auto Feeder Tube size： Φ20-50mm，Length: 20-240mm Mandrel sizes: Φ35mm, Φ50mm Labelling speed： 60-100 tubes/minute（vary with tube and label size） Labelling accuracy： ±0.5mm（excluding tube or label difference） Label size： ID: Φ75mm; OD: Φ300mm; Width: 170mm Compressed air： 0.4-0.7Mpa，3L/min. Power supply： 220VAC±5% 50/60Hz 1.2Kw Machine dimension： (L)2,252×(W)1,350×(H)1,875 Configuration list: S6120 servo label out Japan Yaskawa Label detecting eye Japan Keyence Lhjdot Ami Uepfx Aa Esr Tube detecting eye Japan Keyence Label roller motor transmission Japan Panasonic Stuck tube clearing device Japan Panasonic High precision CAM divider Taiwan RU80DF Pressure roller wheel device Japan Panasonic PLC control system Germany Siemens Touch screen Taiwan Weinview

Condition: used, Year of construction: 1979, outer diameter: 76 mm, pipe diameter (max.): 76 mm, PRODUCT (PROFILE, TUBE) .. external diameter min.: 25 mm .. external diameter max.: 76 mm .. wall thickness min.: 0.7 mm .. wall thickness max.: 3.25 mm LINE CHARACTERISTICS .. welding process: HF inductive .. sawing process: travelling .. speed max.: 100 m/min ELECTRICAL SPECIFICATIONS .. mains power supply: 680 kVA For sale is a high-quality pipe welding line from the renowned manufacturer DREISTERN. Technical Data & Highlights: Line length: approx. 130 m Staff required: 6 operators Welding process: High-frequency welding up to 400 kHz Ledpfexrklxex Aa Eehr Induction welding power: up to 250 kW Advantages: Robust and reliable design – suitable for continuous industrial operation Precise weld quality through state-of-the-art high-frequency technology Ideal for the production of pipes in various dimensions Ready for immediate operation

Condition: new, Year of construction: 2024, Complete set double use laser machine ( 3 and 6 Kw in stock ) sheet metal 3015 ( 3 x 1,5 meter ) Tube 15 to 240 mm diameter Lhodpfjnqzb Iex Aa Eor tube length 6,3 meters include necessary options for a perfect laser line. include 1 filter installation ( cutting air can leave in factory ) include anty fire box. include Vacuum lift for sheet metalplate 800 kg load. no cable unit work on battery in vacuum unit. include 1 compressor for 16 BAR it give posibility to cut steel without gas. for quick cutting and SST steel it save lot of air and can increase the cutting feed consummeble for long time cust free cutting time. include vacuume lifter from 800 Kg lifter work on battery in lifter box so with loading machine no cables around you special for save working arear. all in one price. installation, training by professional service team on request

Condition: used, Year of construction: 1988, gebraucht 1988 090151 prompt, Zwischenverkauf v Italien 12800 € 1 42 mm 4665 mm 800 mm 1160 mm 1470 kg 42 x 2,5 mm 40 x 1,2 mm 30 x 40 x 1,7 mm 40 x 30 x 1,3 mm 255 mm 22 mm 180 ° 90 °/s 5,5 kW 120 l Capacity specifications refer to 400 N/mm² Maximum bending radius with pipe guide rollers: 255 mm Maximum bending radius with pipe guide slide: 175 mm Ljdpfx Aoxx A Ekja Eohr Minimum bending angle: 4° Maximum usable length without positioning device: 3900 mm Maximum usable length with positioning device: 3370 mm Adjustable mandrel extension travel from 8 mm Opening and closing travel of the counter-clamping jaws: 0-45 mm Opening and closing travel of the rollers or slides: 12-22-42 mm Operating manual in German Machine does not comply with AMVO or UVV regulations Tools not included

Condition: used, Year of construction: 1987, tube Ø: 10 - 50 mm wall thickness: 1 - 6 mm reference material (tensile strength): 400 N/mm² speed: approx. 120 m/min Ledpeg I Di Eefx Aa Eohr

Condition: new, Cesurbend Mandrel Bending Machine / Tube Bending Machine PBNC-65 Technical Specifications Max. Tube Diameter (mild steel): 63 mm Max. Tube Wall Thickness (mm): 3 Max. Bending Angle (°): 190 Tube Bending Rate (rpm): 7–10 Max. Hydraulic Pressure (bar): 200 Max. Bending Radius (mm): 250 Min. Bending Radius (mm): 45 Tube Length (mm): 3500 Bending Tolerance (mm): ± 0.25 mm Bending Motor Power (kW): 7.5 Hydraulic Motor Power (kW): 4 Oil Tank Capacity (L): 50 Machine Width (mm): 1450 Machine Length (mm): 4250 Machine Height (mm): 1200 Machine Weight (kg): 1600 Features • 4-way adjustable gauge • Chain bending system • Gear motor • Touchscreen control panel • Foot pedal operation • Hydraulic mandrel movement • Hydraulic damping function Lhsdpfoxt Rdwox Aa Eer • Hydraulic compression function • Hydraulic pusher • Four cylinders • 7" touch color display • 15 sequential twist positions • 100 program memory capacity • Omron PLC control

Condition: new, – Capacity: 34 x 3 mm – Digitally adjustable stroke Lhodpfxjxq Hl Ej Aa Eer – Emergency stop switch – With 3 tool sets: 33.7 mm, 21.4 mm, 16 mm – Documentation – Weight: 80 kg – 400V

Year of construction: 2023, condition: new, outer diameter: 22 mm, We sell 12 lengths of 3m stainless steel pipe seamless (1.4301) 1 length = approx. 2,250 g Wall thickness 1.5 mm Outer diameter 22 mm 740 € for total purchase / individual lengths for 66 € per piece. Lhjdpfx Ajr D I S Rea Eor Shipping by forwarding agent at the buyer's expense. Collection possible on working days or Saturday mornings.

Condition: good (used), Rieber WE-H Tube Stacker For warming, stacking, and transporting a wide variety of tableware in the restaurant, hotel, catering, and communal catering industries. Stainless steel stacker, max. load 150 kg, with a multifunctional mesh platform for different tableware sizes, anti-tilt and anti-skewing. Adjustable spring force. Stainless steel casters according to DIN 18867, Part 8, wheel diameter 125 mm, 2 swivel casters, 2 swivel casters with brakes. Ledpfx Aaexqzrte Eohr Shaft dimensions: 590 x 290 mm Thermostat control +30 °C to +110 °C. Rated voltage: 1N AC 230 V 50 Hz Weight: 55 kg Manufacturer price: €3,013 Find more items - new and used - in our shop! International shipping costs upon request!

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, pipe diameter (max.): 42 mm, pipe length (max.): 3,000 mm, bending radius (max.): 180 mm, wall thickness: 3 mm, Pipe bending machine with electric control, 4-fold bending angle pre-selection and digital display  Lhedpouccw Hofx Aa Esr Hydraulic bending drive operated by hand lever valve Hydraulic bending drive, operated by hand lever valve Follower-type pressure die (sliding guide) Hydraulic mandrel retraction Pipe circular saw with coolant lubrication and automatic feed 6 mandrels up to 24 mm included x 3000 mm Pipe deburring unit for internal and external deburring Hydraulic power unit as basic seating for attaching a cutting ring assembly or flaring device  Machine mobile and flexible to use Max. tube Ø: 42mm Min. tube Ø: 6mm Max. Wall thickness: 3mm Max. Bending radius:5mm Min. bending radius:180mm Max. bending length:3000mm Deburring attachment:Yes Sawing attachment: Yes Flair attachment: Yes Length: 3500mm Width: 1000mm Height: 1200mm Weight: 1000kg

Year of construction: 1987, condition: used, tube Ø: 10 - 50 mm wall thickness: 1 - 6 mm reference material (tensile strength): 400 N/mm² speed: approx. 120 m/min Lodpfx Aasg I Di Ns Eohr

Condition: new, Cesurbend Mandrel Tube Bending Machine / Pipe Bending Machine PBNC-51 Technical Specifications Lsdpoxt Rc Tsfx Aa Ejhr Max. Tube Diameter: 51 mm Max. Tube Wall Thickness (mm): 3 Max. Bending Angle (°): 190 Tube Bending Rate (rpm): 7-10 Max. Hydraulic Pressure (bar): 200 Max. Bending Radius (mm): 250 Tube Length (mm): 3000 Bending Motor Power (kW): 5.5 Hydraulic Motor Power (kW): 3 Machine Width (mm): 1400 Machine Length (mm): 4215 Machine Height (mm): 1450 Machine Weight (kg): 1600 Features • In this process, the jaw clamps the tube after it is inserted into the machine. The tube is bent over the die to half its diameter. When using a mandrel and wiper, better results are achieved for bends requiring higher quality, with thinner wall thickness and smaller radii. • This is a three-piston machine with a hydraulic spool located behind the hydraulic boom.

Condition: used, Year of construction: 2001, Technical details: tube diameter: 74 mm wall strength: 5 mm tube diameter min.: 10 mm tube diameter max.: 74 mm round material: Stahl max: 40 mm control: Trumpf-Rohrtechnik IsoBend 2.0 bending radius max.: max: 300 / min: 65 mm bending angle max.: max: 195 / min: 0,1 ° bending speed: (°/s): 90 / (°/s²): 190 °/s tube pipe draw up length: 3000 mm work pressure of hydraulic: Betriebsdruck max: 300 bar total power requirement: 43 kVA weight of the machine ca.: 8,5 t dimension machine xH: 6,5 x 1,6 x 1,6 m dimension control panel: 0,8 x 0,6 x 1,4 m It is a multi radius bending machine with bending head and swivel arm. (Cold bending machine) Possible applications: only for processing pipes, round steels and wires made of steel, stainless steel and non-ferrous metals. Due to the cross slide of the bending head, the following advantages can be listed: -free programmable X and Y axes -level change cross slide: tical travel = 300mm (vert. position freely programmable) and max. horizontal movement 350mm -Bending forms of different sizes within a stack of bending forms can be approached as required. The bending direction is to the right. Control software Trumpf-Rohrtechnik IsoBend 2.0 Hydraulic unit with high-pressure multi-flow pump Ledpfx Aaju Ibvho Eshr Mandrel retraction unit Slide rail (speed max. 362mm/sec. and acceleration max. 1100 mm/sec.) i.D. *

Condition: good (used), Manufacturer: Tracto Technik Type: TUBOMAT Year of construction: 1996 Pipe bending machine with electric control, 4-fold bending angle pre-selection and digital display Hydraulic bending drive operated by hand lever valve Hydraulic bending drive, operated by hand lever valve Follower-type pressure die (sliding guide) Hydraulic mandrel retraction Pipe circular saw with coolant lubrication and automatic feed Pipe deburring unit for internal and external deburring Hydraulic power unit as basic seating for attaching a cutting ring assembly or flaring device Machine mobile and flexible to use Specifications Metric US Standard Max. Product Ø 42 mm Min. product Ø 6 mm Max. Wall thickness 3 mm Max. Bending radius 5 mm Min. bending radius 180 mm Max. Bending length 2000 mm Deburring device Yes Sage device Yes Flanging device Yes Lhsdpfot Dk Ukex Aa Eer Dimensions (estimate) Length 3500 mm width 1000 mm height 1200 mm weight 1000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: new, Cesurbend Tube Bending Machine / Pipe Bending Machine PBNC-38 Technical Specifications Max. tube diameter (mm): 38 Max. wall thickness (mm): 2 Max. bending angle (°): 190 Tube bending speed (rpm): 8-10 Max. bending radius (mm): 250 Tube length (mm): 2500 Bending motor power (kW): 3 Hydraulic motor power (kW): 1.5 Machine width (mm): 1400 Machine length (mm): 3250 Machine height (mm): 1200 Machine weight (kg): 700 Features Lodpfoxt Rctex Aa Eehr • 4-position adjustable gauge • Option to use mandrel and spoon on NC machines • The carriage system is equipped with a linear guide rail and carriage • Connection equipment is standard. Mandrel and spoon are optional. • 7" color touchscreen display • 5 sequential twisting options • 100 program memory capacity • Omron PLC control

Condition: new, Cesurbend Mandrel Bending Machine / Tube Bending Machine PBH-32 Lhedpfx Aaoxt Rb Ne Eor Technical specifications Max. tube diameter: 32 mm Max. wall thickness (mm): 2 Max. bending angle (°): 190 Tube bending speed (d/min): 8.5 Max. bending radius (mm): 275 Bending motor power (kW): 2.2 Hydraulic motor power (kW): 1.5 Tube length (mm): 2000 Machine width (mm): 1000 Machine length (mm): 2300 Machine height (mm): 1050 Machine weight (kg): 400 Features • Hydraulic clamping • Brake motor / precision rotation • Manual size adjustment

Condition: new, Cesurbend Mandrel Tube Bending Machine / Pipe Bender PBM-32 E Technical Specifications Max. tube diameter (mm): 32 Max. tube wall thickness (mm): 2 Max. bending angle (°): 190 Tube bending speed (rev/min): 8.5 Max. bending radius (mm): 275 Bending motor power (kW): 2.2 Tube length (mm): 2000 Machine width (mm): 1000 Machine length (mm): 2300 Machine height (mm): 1050 Machine weight (kg): 300 Lhedsxt Rbpspfx Aa Eor Features • 4-way adjustable measuring device • 7" color touch display • 5 sequential rotation options • 100 program memory capacity • Omron PLC control

Condition: new, Cesurbend Mandrel Bending Machine / Pipe Bending Machine PBM-32 Technical Specifications Max. pipe diameter: 32 mm Max. wall thickness (mm): 2 Max. bending angle (°): 190 Pipe bending speed (r/min): 8.5 Max. bending radius (mm): 275 Bending motor power (kW): 2.2 Pipe length (mm): 2000 Machine width (mm): 1000 Machine length (mm): 2300 Ledpfxoxt Ra Es Aa Eshr Machine height (mm): 1050 Machine weight (kg): 300 Features • This is a semi-automatic machine. If you need to bend only a few pipes per day (25-50 pieces per day), this machine is the right choice. • It is the simplest pipe bending machine with brake motor. • Brake motor / precise bending • Manual dimension setting • Former rack